236
Views
0
CrossRef citations to date
0
Altmetric
Articles

An AI-based approach to improve the fuel properties and performance of nano graphene added straight Karanja oil prepared with optimal dispersion parameters

ORCID Icon & ORCID Icon
Pages 619-633 | Received 14 Aug 2022, Accepted 18 Dec 2022, Published online: 02 Jan 2023

References

  • Kumar Patidar S, Raheman H. Performance and durability analysis of a single-cylinder direct injection diesel engine operated with water emulsified biodiesel-diesel fuel blend. Fuel. 2020;273:117779.
  • Kumar N, Raheman H, Machavaram R. Performance of a diesel engine with water emulsified diesel prepared with optimized process parameters. Int J Green Energy. 2019;16(9):687–701.
  • Gautam R, Chauhan BS, Chang Lim H. Influence of variation of injection angle on the combustion, performance and emissions characteristics of Jatropha ethyl ester. Energy. 2022;254:124436.
  • Hazar H, Telceken T, Sevinc H. An experimental study on emission of a diesel engine fuelled with SME (safflower methyl ester) and diesel fuel. Energy. 2022;241:122915.
  • Onoji SE, Iyuke SE, Igbafe AI, et al. Rubber seed (Hevea brasiliensis) oil biodiesel emission profiles and engine performance characteristics using a TD202 diesel test engine. Biofuels. 2022;13(4):423–430.
  • Syafiuddin A, Chong JH, Yuniarto A, et al. The current scenario and challenges of biodiesel production in Asian countries: a review. Bioresour Technol Rep. 2020;12:100608.
  • Murray R, King G, Wyse-Mason R. Micro-emulsification vs. transesterification: an investigation of the efficacy of methanol use in improving vegetable oil engine performance. Biofuels. 2021;12(9):1165–1174.
  • Bharadwaj A, Niju S, Sheriffa Begum M, et al. A. Performance and evaluation of calcined limestone as catalyst in biodiesel production from high viscous nonedible oil. Environ Prog Sustain Energy. 2020;39(3):e13342. https://onlinelibrary.wiley.com/doi/full/10.1002/ep.13342.
  • Sai Bharadwaj AVSL, Singh M, Niju S, et al. Biodiesel production from rubber seed oil using calcium oxide derived from eggshell as catalyst-optimization and modeling studies. Green Process Synth. 2019;8(1):430–442. https://www.degruyter.com/document/doi/10.1515/gps-2019-0011/html.
  • Sai B, Subramaniapillai N, Khadhar Mohamed MSB, et al. Optimization of continuous biodiesel production from rubber seed oil (RSO) using calcined eggshells as heterogeneous catalyst. J Environ Chem Eng. 2020;8(1):103603.
  • Aryasomayajula Venkata Satya Lakshmi SB, Subramania Pillai N, Khadhar Mohamed MSB, et al. Biodiesel production from rubber seed oil using calcined eggshells impregnated with Al2O3 as heterogeneous catalyst: a comparative study of RSM and ANN optimization. Braz J Chem Eng. 2020;37(2):351–368. https://link.springer.com/article/10.1007/s43153-020-00027-9.
  • Panneerselvam N, Murugesan A, Vijayakumar C, et al. Effects of injection timing on bio-diesel fuelled engine characteristics – an overview. Renew Sustain Energy Rev. 2015;50:17–31.
  • Sonar D, Soni SL, Sharma D, et al. Performance and emission characteristics of a diesel engine with varying injection pressure and fuelled with raw mahua oil (preheated and blends) and mahua oil methyl ester. Clean Tech Environ Policy. 2015;17(6):1499–1511.
  • Prasad VJJ, Rambabu V. Combustion and performance analysis of direct injection, compression ignition engine fuel with preheated neat cotton seed methyl ester. Biofuels. 2015;6(3-4):137–145.
  • Pradhan P, Raheman H, Padhee D. Combustion and performance of a diesel engine with preheated Jatropha curcas oil using waste heat from exhaust gas. Fuel. 2014;115:527–533.
  • Chauhan BS, Kumar N, Du Jun Y, et al. Performance and emission study of preheated Jatropha oil on medium capacity diesel engine. Energy. 2010;35(6):2484–2492.
  • Agarwal AK, Rajamanoharan K. Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine. Appl Energy. 2009;86(1):106–112.
  • Hazar H, Sevinc H, Sap S. Performance and emission properties of preheated and blended fennel vegetable oil in a coated diesel engine. Fuel. 2019;254:115677.
  • Agarwal AK, Katiyar V, Singh K. Optimisation of Karanja/Jatropha-Methanol emulsification variables and their engine evaluation. Renew Energy. 2016;96:433–441.
  • Jain NL, Soni SL, Poonia MP, et al. Performance and emission characteristics of preheated and blended thumba vegetable oil in a compression ignition engine. Appl Therm Eng. 2017;113:970–979.
  • Misra RD, Murthy MS. Straight vegetable oils usage in a compression ignition engine – a review. Renew Sustain Energy Rev. 2010;14(9):3005–3013.
  • Soudagar MEM, Nik-Ghazali NN, Abul Kalam M, et al. The effect of nano-additives in diesel-biodiesel fuel blends: a comprehensive review on stability, engine performance and emission characteristics. Energy Convers Manag. 2018;178:146–177.
  • Kumar S, Dinesha P, Bran I. Experimental investigation of the effects of nanoparticles as an additive in diesel and biodiesel fuelled engines: a review. Biofuels. 2019;10(5):615–622.
  • Anand G, Odillard L, Mwendwa Kibet A. Performance optimization by study of tribological and rheological properties of dates oil with graphene oxide nano-additives. Biofuels. 2022;13(9):1055–1061.
  • Hoseini SS, Najafi G, Ghobadian B, et al. Novel environmentally friendly fuel: the effects of nanographene oxide additives on the performance and emission characteristics of diesel engines fuelled with Ailanthus altissima biodiesel. Renew Energy. 2018;125:283–294.
  • Soudagar MEM, Nik-Ghazali NN, Kalam MA, et al. The effects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics. Fuel. 2019;257:116015.
  • Chacko N, Jeyaseelan T. Comparative evaluation of graphene oxide and graphene nanoplatelets as fuel additives on the combustion and emission characteristics of a diesel engine fuelled with diesel and biodiesel blend. Fuel Process Technol. 2020;204:106406.
  • Mardi K M, Antoshkiv O, Berg HP. Experimental analysis of the effect of nano-metals and novel organic additives on performance and emissions of a diesel engine. Fuel Process Technol. 2019;196:106166.
  • Chen W, Zhu B, Sun Y, et al. Nano-sized copper oxide enhancing the combustion of aluminum/kerosene-based nanofluid fuel droplets. Combust Flame. 2022;240:112028.
  • Patel RL, Sankhavara CD. Biodiesel production from Karanja oil and its use in diesel engine: a review. Renew Sustain Energy Rev. 2017;71:464–474.
  • Sangwan S, Rao Dv, Sharma RA. A review on Pongamia pinnata (L.). Pierre: a Great Versatile Leguminous Plant. Nat Sci. 2010;8(11):130–139.
  • Khayoon MS, Olutoye MA, Hameed BH. Utilization of crude karanj (Pongamia pinnata) oil as a potential feedstock for the synthesis of fatty acid methyl esters. Bioresour Technol. 2012;111:175–179.
  • Graphene Oxide Powder Supplier and Manufacturer [Internet]. [cited 2022 Nov 5]. Available from: https://shilpent.com/graphene/29-299-graphene-oxide.html#/1-size-10gm
  • Paramashivaiah BM, Banapurmath NR, Rajashekhar CR, et al. Studies on effect of graphene nanoparticles addition in different levels with simarouba biodiesel and diesel blends on performance, combustion and emission characteristics of CI engine. Arab J Sci Eng. 2018;43(9):4793–4801.
  • Ghadimi A, Saidur R, Metselaar HSC. A review of nanofluid stability properties and characterization in stationary conditions. Int J Heat Mass Transf. 2011;54(17-18):4051–4068.
  • Soudagar MEM, Nik-Ghazali NN, Kalam MA, et al. An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics. Renew Energy. 2020;146:2291–2307.
  • El-Seesy AI, Hassan H, Ookawara S. Effects of graphene nanoplatelet addition to Jatropha biodiesel–diesel mixture on the performance and emission characteristics of a diesel engine. Energy. 2018;147:1129–1152.
  • Kumar M, Pandey RK, Kumar V, editors. Advances in interdisciplinary engineering: Select proceedings of FLAME 2018. Springer; 2019.
  • Hoseini SS, Najafi G, Ghobadian B, et al. Biodiesels from three feedstock: the effect of graphene oxide (GO) nanoparticles diesel engine parameters fuelled with biodiesel. Renew Energy. 2020;145:190–201.
  • Aalam CS, Saravanan CG. Effects of nano metal oxide blended Mahua biodiesel on CRDI diesel engine. Ain Shams Eng J. 2017;8(4):689–696.
  • Ooi JB, Ismail HM, Tan BT, et al. Effects of graphite oxide and single-walled carbon nanotubes as diesel additives on the performance, combustion, and emission characteristics of a light-duty diesel engine. Energy. 2018;161:70–80.
  • Kundu P, Paul V, Kumar V, et al. Formulation development, modeling and optimization of emulsification process using evolving RSM coupled hybrid ANN-GA framework. Chem Eng Res Des. 2015;104:773–790.
  • Yu H, Xie T, Paszczyñski S, et al. Advantages of radial basis function networks for dynamic system design. IEEE Trans Ind Electron. 2011;58(12):5438–5450.
  • Al-Majidi SD, Abbod MF, Al-Raweshidy HS. A particle swarm optimisation-trained feedforward neural network for predicting the maximum power point of a photovoltaic array. Eng Appl Artif Intell. 2020;92:103688.
  • Selvan SS, Pandian PS, Subathira A, et al. Saraca asoca seeds–a novel candidature for biodiesel production: studies on yield optimization using ANN coupled GA and properties of biodiesel blends. Int J Green Energy. 2018;15(14-15):918–929.
  • Kusumo F, Silitonga AS, Masjuki HH, et al. Optimization of transesterification process for Ceiba pentandra oil: a comparative study between kernel-based extreme learning machine and artificial neural networks. Energy. 2017;134:24–34.
  • Sakthivel G, Senthil Kumar S, Ilangkumaran M. A genetic algorithm-based artificial neural network model with TOPSIS approach to optimize the engine performance. Biofuels. 2019;10(6):693–717.
  • Sanjeevannavar MB, Banapurmath NR, Soudagar MEM, et al. Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach. Chemosphere. 2022;288(Pt 2):132450.
  • Aghbashlo M, Peng W, Tabatabaei M, et al. Machine learning technology in biodiesel research: a review. Prog Energy Combust Sci. 2021;85:100904.
  • Kumar N, Raheman H. Characterization of nano-oxide added water emulsified biodiesel blend prepared with optimal emulsifying parameters. Renew Energy. 2020;145:308–317.
  • IS 10000-8: methods of tests for internal combustion engines, part 8: perfornance tests : Bureau of Indian Standards : Free Download, Borrow, and Streaming : Internet Archive [Internet]. [cited 2022 Nov 5]. Available from: https://archive.org/details/gov.in.is.10000.8.1980
  • IS 10000-4: methods of tests for internal combustion engines, part IV: declaration of power, efficiency, fuel consumption and lubricating oil consumption: Bureau of Indian Standards: Free Download, Borrow, and Streaming : Internet Archive [Internet]. [cited 2022 Nov 5]. Available from: https://archive.org/details/gov.in.is.10000.4.1980
  • Ahmadi MA, Soleimani R, Lee M, et al. Determination of oil well production performance using artificial neural network (ANN) linked to the particle swarm optimization (PSO) tool. Petroleum. 2015;1(2):118–132.
  • Kumar N, Raheman H. Production, characterization and utilization of second generation biodiesel blend in diesel engine using water and nanoparticles as additives. Fuel. 2022;308:122063.
  • Rohman A, Che Man YB, Ismail A, et al. Application of FTIR spectroscopy for the determination of virgin coconut oil in binary mixtures with olive oil and palm oil. J Am Oil Chem Soc. 2010;87(6):601–606.
  • de Souza TRP, Olenka L, Peternella WS. A study of degradation in vegetable oils by exposure to sunlight using Fourier transform infrared spectroscopy. MSA. 2020;11(10):678–691.
  • Emiru TF, Ayele DW. Controlled synthesis, characterization and reduction of graphene oxide: a convenient method for large scale production. Egypt J Basic Appl Sci. 2017;4(1):74–79.
  • Dhanasekar K, Sridaran M, Arivanandhan M, et al. A facile preparation, performance and emission analysis of pongamia oil based novel biodiesel in diesel engine with CeO2:Gd nanoparticles. Fuel. 2019;255:115756.
  • Hoang AT, Noor MM, Pham XD. Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. Int J Automot Mech Eng. 2018;15(1):5110–5125.
  • Singh D, Sharma D, Soni SL, et al. A review on feedstocks, production processes, and yield for different generations of biodiesel. Fuel. 2020;262:116553.
  • Sidibe S, Blin J, Daho T, et al. Comparative study of three ways of using Jatropha curcas vegetable oil in a direct injection diesel engine. Sci Afr. 2020;7:e00290.
  • Ağbulut Ü, Elibol E, Demirci T, et al. Synthesis of graphene oxide nanoparticles and the influences of their usage as fuel additives on CI engine behaviors. Energy. 2022;244:122603.
  • Shah PR, Gaitonde UN, Ganesh A. Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics. Renew Energy. 2018;115:685–696.
  • EL-Seesy AI, Hassan H. Investigation of the effect of adding graphene oxide, graphene nanoplatelet, and multiwalled carbon nanotube additives with n-butanol-Jatropha methyl ester on a diesel engine performance. Renew Energy. 2019;132:558–574.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.