References
- Ahmed, S. R., & Ramm, G. (1984). Salient features of the time-averaged ground vehicle wake. SAE Technical Paper, p. 840300.
- Aljure, D. E., Lehmkuhl, O., Rodriguez, I., & Oliva, A. (2014). Flow and turbulent structures around simplified car models. Computers & Fluids, 96, 122–135.
- Beigmoradi, S. (2015). Aerodynamic drag and noise minimization of rear end parameters in a simplified car model utilizing Robust parameter design method. SAE Technical Paper 2015-01-1360. doi:10.4271/2015-01-1360.
- Beigmoradi, S., Hajabdollahi, H., & Ramezani, A. (2014). Multi-objective aero acoustic optimization of rear end in a simplified car model by using hybrid Robust parameter design, artificial neural networks and genetic algorithm methods. Computers & Fluids, 90, 123–132.
- Beigmoradi, S., & Ramezani, A. (2013). Effect of the backlight angle on the aero-acoustics of the C-Pillar. International Review on Modelling and Simulations (IREMOS), 6(3), 988–993.
- Buljac, A., Džijan, I., Korade, I., Krizmanić, S., & Kozmar, H. (2016). Automobile aerodynamics influenced by airfoil-shaped rear wing. International Journal of Automotive Technology, 17, 377–385.
- Connor, C., Kharazi, A., Walter, J., & Martindale, B. (2006). Comparison of wind tunnel configurations for testing closed-wheel race cars: A CFD study. SAE 2006-01-3620.
- Corallo, M., Sheridan, J., & Thompson, M. C. (2015). Effect of aspect ratio on the near-wake flow structure of an Ahmed body. Journal of Wind Engineering and Industrial Aerodynamics, 147, 95–103.
- Grandemange, M., Cadot, O., Courbois, A., Herbert, V., Ricot, D., Ruiz, T., & Vigneron, R. (2015). A study of wake effects on the drag of Ahmed׳s squareback model at the industrial scale. Journal of Wind Engineering and Industrial Aerodynamics, 145, 282–291.
- Ha, J., Jeong, S., & Obayashi, S. (2011). Drag reduction of a pickup truck by a rear downward flap. International Journal of Automotive Technology, 12, 369–374.
- Ha, S. J., Chun, U., Park, J. Y., & Kim, M. S. (2017). Enhancement of aerodynamic performance through high pressure relief in the engine room for passenger car using cfd technique. International Journal of Automotive Technology, 18, 779–784.
- Hanfeng, W., Yu, Z., Chao, Z., & Xuhui, H. (2016). Aerodynamic drag reduction of an Ahmed body based on deflectors. Journal of Wind Engineering and Industrial Aerodynamics, 148, 34–44.
- Huminic, A., & Huminic, G. (2017). Aerodynamic study of a generic car model with wheels and underbody diffuser. International Journal of Automotive Technology, 18, 397–404.
- Khaled, M., El Hage, H., Harambat, F., & Peerhossaini, H. (2012). Some innovative concepts for car drag reduction: A parametric analysis of aerodynamic forces on a simplified body. Journal of Wind Engineering and Industrial Aerodynamics, 107, 36–47.
- Khalighi, B., Jindal, S., & Iaccarino, G. (2012). Aerodynamic flow around a sport utility vehicle—Computational and experimental investigation. Journal of Wind Engineering and Industrial Aerodynamics, 107, 140–148.
- Kim, J. J., Lee, S., Kim, M., You, D., & Lee, S. J. (2017). Salient drag reduction of a heavy vehicle using modified cab-roof fairings. Journal of Wind Engineering and Industrial Aerodynamics, 164, 138–151.
- Kim, S. C., & Han, S. Y. (2016). Effect of steady airflow field on drag and downforce. International Journal of Automotive Technology, 17, 205–211.
- Lenth, R. (1989). Quick and easy analysis of unreplicated factorials. Technometrics: A Journal of Statistics for the Physical, Chemical, and Engineering Sciences, 31, 469–473.
- Montgomery, D. (2012). Design and analysis of experiments (8th ed.). Courier Westford from John Wiley & Sons Inc.
- Salati, L., Cheli, F., & Schito, P. 2015. Heavy truck drag reduction obtained from devices installed on the trailer. SAE International Journal of Commercial Vehicles, 8, 747–760. 2015-01-2898.
- Salati, L., Schito, P., & Cheli, F. (2017). Wind tunnel experiment on a heavy truck equipped with front-rear trailer device. Journal of Wind Engineering and Industrial Aerodynamics, 171, 101–109.
- Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., & Zhu, J. (1995). A new Eddy-viscosity model for high Reynolds number turbulent flows – Model development and validation. Computers & Fluids, 24(3), 227–238.
- Song, K. S., Kang, S. O., Jun, S. O., Park, H. I., Kee, J. D., Kim, K. H., & Lee, D. H. (2012). Aerodynamic design optimization of rear body shapes of a sedan for drag reduction. International Journal of Automotive Technology, 13, 905–914.
- Strachan, R., Knowles, K., & Lawson, N. (2007). The vortex structure behind an Ahmed reference model in the presence of a moving ground plane. Experiments in Fluids, 42(5), 659–669.
- Thacker, A., Aubrun, S., Leroy, A., & Devinant, P. (2012). Effects of suppressing the 3D separation on the rear slant on the flow structures around an Ahmed body. Journal of Wind Engineering and Industrial Aerodynamics, 107, 237–243.
- Tunay, T., Yaniktepe, B., & Sahin, B. (2016). Computational and experimental investigations of the vortical flow structures in the near wake region downstream of the Ahmed vehicle model. Journal of Wind Engineering and Industrial Aerodynamics, 159, 48–64.