Advanced search
Publication Cover
International Journal of Geotechnical Engineering Volume 10, 2016 - Issue 3
Submit an article Journal homepage
256
Views
12
CrossRef citations to date
0
Altmetric
Technical Note

Bearing capacity of strip footings by incorporating a non-associated flow rule in lower bound limit analysis

Debarghya ChakrabortyDepartment of Civil Engineering, Indian Institute of Technology Kharagpur, Kharagpur, IndiaCorrespondence[email protected]
Pages 311-315 | Received 25 Mar 2015, Accepted 07 May 2015, Published online: 16 Feb 2016

References

  • Bolton, M. D. and Lau, C. K. 1993. Vertical bearing capacity factors for circular and strip footings on Mohr-Coulomb soil, Canadian Geotechnical Journal, 30, (6), 1024–1033.10.1139/t93-099
  • Chakraborty, D. and Kumar, J. 2013. Bearing capacity of foundations on slopes, Geomechanics and Geoengineering. An International Journal, 8, (4), 274–285.
  • Drescher, A. and Detournay, E. 1993. Limit load in translational failure mechanisms for associative and non-associative materials, Géotechnique, 43, (3), 443–456.10.1680/geot.1993.43.3.443
  • Krabbenhoft, K. and Damkilde, L. 2003. A general non-linear optimization algorithm for lower bound limit analysis, International Journal for Numerical Methods in Engineering, 56, (2), 165–184.10.1002/(ISSN)1097-0207
  • Kumar, J. 2009. The variation of Nγ with footing roughness using the method of characteristics, International Journal for Numerical and Analytical Methods in Geomechanics, 33, (2), 275–284.10.1002/nag.v33:2
  • Kumar, J. and Chakraborty, D. 2013. Seismic bearing capacity of foundations on cohesionless slopes, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 139, (11), 1986–1993.10.1061/(ASCE)GT.1943-5606.0000909
  • Kumar, J. and Khatri, V. 2008. Effect of footing roughness on lower bound Nγ values, International Journal of Geomechanics, ASCE, 8, (3), 176–187.10.1061/(ASCE)1532-3641(2008)8:3(176)
  • Kumar, J. and Kouzer, K. M. 2007. Effect of footing roughness on bearing capacity factor Nγ, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 133, (5), 502–511.10.1061/(ASCE)1090-0241(2007)133:5(502)
  • Meyerhof, G. G. 1963. Some recent research on the bearing capacity of foundations, Canadian Geotechnical Journal, 1, (1), 16–26.10.1139/t63-003
  • Michalowski, R. L. 1997. An estimate of the influence of soil weight on bearing capacity using limit analysis, Soils Found., 37, (4), 57–64.10.3208/sandf.37.4_57
  • Sloan, S. W. 1988. Lower bound limit analysis using finite-elements and linear programming, International Journal for Numerical and Analytical Methods in Geomechanics, 12, (1), 61–77.10.1002/(ISSN)1096-9853
  • Soubra, A. H. 1999. Upper-bound solutions for bearing capacity of foundations, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125, (1), 59–68.10.1061/(ASCE)1090-0241(1999)125:1(59)
  • Terzaghi, K. 1943. Theoretical soil mechanics, New York, Wiley.10.1002/9780470172766
  • Ukritchon, B., Whittle, A. W. and Klangvijit, C. 2003. Calculation of bearing capacity factor Nγ using numerical limit analyses, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129, (5), 468–474.10.1061/(ASCE)1090-0241(2003)129:6(468)
  • Veiskarami, M., Kumar, J. and Valikhah, F. 2014. Effect of the flow rule on the bearing capacity of strip foundations on sand by the upper-bound limit analysis and slip lines. International Journal of Geomechanics, ASCE, 14, (3), 04014008.10.1061/(ASCE)GM.1943-5622.0000324
  • Yin, J., Wang, Y. and Selvadurai, A. 2001. Influence of nonassociativity on the bearing capacity of a strip footing, Journal of Geotechnical and Geoenvironmental Engineering ASCE, 127, (11), 985–989.10.1061/(ASCE)1090-0241(2001)127:11(985)
  • Zienkiewicz, O. C., Humpheson, C. and Lewis, R. W. 1975. Associated and non-associated visco-plasticity and plasticity in soil mechanics, Géotechnique, 25, (4), 671–689.10.1680/geot.1975.25.4.671

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.