References
- ASTM Standard (C150/C150M-12). “Standard Specification for Portland Cement.” ASTM International, West Conshohocken, PA, 2011. Accessed May 25, 2016. www.astm.org
- ASTM Standard (D7181-11). “Method for Consolidated Drained Triaxial Compression Test for Soils.” ASTM International, West Conshohocken, PA, 2011. Accessed May 25, 2016. www.astm.org
- Bellotti, R., J. Benoit, C. Fretti, and M. Jamiolkowski. 1997. “Stiffness of Toyoura Sand from Dilatometer Tests.” Journal of Geotechnical and Geoenvironmental Engineering 123 (9): 836–846. doi:https://doi.org/10.1061/(ASCE)1090-0241(1997)123:9(836).
- Clough, G. W., N. Sitar, R. C. Bachus, and N. S. Rad. 1981. “Cemented Sands under Static Loading.” Journal of the Geotechnical Engineering Division-ASCE 107 (6): 799–817. doi:https://doi.org/10.1061/AJGEB6.0001152.
- Consoli, N. C., A. V. Da Fonseca, R. C. Cruz, Silva, and R. S. 2011. “Voids/cement Ratio Controlling Tensile Strength of Cement-treated soils.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE 137 (11): 1126–1131. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000524.
- Consoli, N. C., K. S. Heineck, and M, D. T. Casagrande. 2007b. “Shear Strength Behaviour of Fibre Reinforced Sand considering Triaxial Tests under Distinct Stress Paths.” Journal of Geotechnical and Geoenvironmental Engineering 133 (No. 11): 1466–1469. doi:https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1466).
- Consoli, N. C., M. D. T. Casagrande, and M. R. Coop. 2007a. “Performance of a Fibre-reinforced Sand at Large Shear Strains.” Geʹotechnique 57 (No. 9): 751–756. doi:https://doi.org/10.1680/geot.2007.57.9.751.
- Consoli, N. C., P. D. M. Prietto, and L. A. Ulbrich. 1998. “Influence of Fibre and Cement Addition on Behaviour of Sandy Soil.” Journal of Geotechnical and Geoenvironmental Engineering 124 (12): 1211–1214. doi:https://doi.org/10.1061/(ASCE)1090-0241(1998)124:12(1211).
- Consoli, N.C., J.P. Montardo, P.D.M. Prietto, and G.S. Pasa. 2002. “Engineering Behaviour of a Sand Reinforced with Plastic Waste.” Journal of Geotechnical and Geoenvironmental Engineering 128 (6): 462–472. doi:https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(462).
- Consoli, N.C., M.A. Vendruscolo, A. Fonini, and F. Dalla Rosa. 2009. “Fibre Reinforcement Effects on Sand considering a Wide Cementation Range.” Geotextiles and Geomembranes 27 (3): 196–203. doi:https://doi.org/10.1016/j.geotexmem.2008.11.005.
- Consoli, N.C., R.C. Cruz, M.F. Floss, and L. Festugato. 2010. “Parameters Controlling Tensile and Compressive Strength of Artificially Cemented Sand.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE 136 (5): 759–763. doi:https://doi.org/10.1061/(ASCE)GT.1943-5606.0000278.
- Coop, M. R., and J. H. Atkinson. 1993. “The Mechanics of Cemented Carbonate Sands.” Géotechnique 43 (1): 53–67. doi:https://doi.org/10.1680/geot.1993.43.1.53.
- De, S., and P. K. Basudhar . 2008. “Steady State Strength Behaviour of Yamuna Sand.” Geotechnical and Geological Engineering, 26, 237. https://doi.org/https://doi.org/10.1007/s10706-007-9160-5.
- Diambra, A. 2010. “Fibre Reinforced Sands: Experiments and Modelling.” PhD Dissertation, University of Bristol, UK.
- Haeri, S. M., A. Hamidi, and N. Tabatabaee. 2005. “The Effect of Gypsum Cementation on the Mechanical Behavior of Gravely Sands.” Geotechnical Testing Journal 28: 180–190.
- Hamidi, A., and M. Hooresfand. 2013. “Effect of Fibre Reinforcement on Triaxial Shear Behaviour of Cement Treated Sand.” Geotextiles and Geomembranes 36: 1–9. doi:https://doi.org/10.1016/j.geotexmem.2012.10.005.
- Head, K. H. 1986. Manual of Laboratory Testing Volume 3: Effective Stress Tests. New York: ELE International Limited.
- Hyodo, M., H. Tanimizu, N. Yasufuku, and H. Murata. 1994. “Undrained Cyclic and Monotonic Triaxial Behaviour of Saturated Loose Sand.” Soils and Foundations 34 (1): 19–32. doi:https://doi.org/10.3208/sandf1972.34.19.
- Kaniraj, S., and V. Havanagi. 2001. “Behaviour of Cement-stabilized Fibre-reinforced Fly Ash-soil Mixtures.” Journal of Geotechnical and Geoenvironmental Engineering 127 (7): 574–584. doi:https://doi.org/10.1061/(ASCE)1090-0241(2001)127:7(574).
- Koutenaei, R. Y., A. J. Choobbasti, and S. S. Kutanaei. 2019. “Triaxial Behaviour of a Cemented Sand Reinforced with Kenaf Fibres.” European Journal of Environmental and Civil Engineering 33 (17): 1913–1938. doi:https://doi.org/10.1080/19648189.2019.1574607.
- Kutanaei, S. S., and A. J. Choobbasti. 2015. “Triaxial Behaviour of Fibre-reinforced Cemented Sand.” Journal of Adhesion Science and Technology 30 (6): 579–593. doi:https://doi.org/10.1080/01694243.2015.1110073.
- Kutanaei, S. S., and A. J. Choobbasti. 2016. “Experimental Study of Combined Effects of Fibres and Nanosilica on Mechanical Properties of Cemented Sand.” Journal of Materials in Civil Engineering © ASCE.28 . 0899–1561. .
- Ladd, R. S. 1978. “Preparing Test Specimens Using Undercompaction.” Geotechnical Testing Journal 1 (1): 16–23. doi:https://doi.org/10.1520/GTJ10364J.
- Lam, W.K., and F. Tatsuoka. 1988. “Effects of Initial Anisotropic Fabric and Sigma2 on Strength and Deformation Characteristics of Sand.” Soils and Foundations 28 (1): 89–106. doi:https://doi.org/10.3208/sandf1972.28.89.
- Maher, M.H., and Y.C. Ho. 1993. “Behaviour of Fibre-reinforced Cement Sand under Static and Cyclic Loads.” Geotechnical Testing Journal 16 (3): 330–338. doi:https://doi.org/10.1520/GTJ10054J.
- Marri, A. 2010. “The Mechanical Behaviour of Cemented Granular Materials at High Pressures.” PhD Thesis, University of Nottingham.
- Mukherjee, K., and A. K. Mishra. 2019. “Impact of Glass Fibre on Hydromechanical Behaviour of Compacted Sand–bentonite Mixture for Landfill Application.” European Journal of Environmental and Civil Engineering 1 (1): 1–22.
- Naemeh, N., H. El Naggar . 2019. “Application of Back Pressure for Saturation of Soil Samples in Cyclic Triaxial Tests.” In Geotechnical Engineering in the XXI Century:Lessons Learned and Future Challenges, edited by N.P. López-Acosta, 2019. IOS Press EBooks. https://ebooks.iospress.nl/publication/53241.
- Nakamichi, M., and K. Sato. 2013. A Method of Suppressing Liquefaction Using A Solidification Material and Tension Stiffeners. Paris, France: International Conference on Soil Mechanics and Geotechnical Engineering.
- Oda, M. 1977. “On the Influence of Progressive Failure on the Bearing Capacity of Shallow Foundations in Dense Sand.” Soils and Foundations, 17, 71–73. https://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=PASCALGEODEBRGM7820241497.
- Omar, T., and A. Sadrekarimi. 2015. “Effect of Triaxial Specimen Size on Engineering Design and Analysis.” International Journal of Geo-Engineering 6 (1): 5. doi:https://doi.org/10.1186/s40703-015-0006-3.
- Park, S. S. 2009. “Effect of Fibre Reinforcement and Distribution on Unconfined Compressive Strength of Fibre-reinforced Cemented Sand.” Geotextiles and Geomembranes 27 (2): 162–166. doi:https://doi.org/10.1016/j.geotexmem.2008.09.001.
- Park. 2011. “Unconfined Compressive Strength and Ductility of Fibre Reinforced Cemented Sand.” Construction and Building Materials 25 (2): 1134–1138. doi:https://doi.org/10.1016/j.conbuildmat.2010.07.017.
- Plé, O., H. Lê, and P. Gotteland. 2009. “A Mechanical Approach for Fibre-reinforced Clay in Landfill Caps Cover Application.” European Journal of Environmental and Civil Engineering 13 (1): 53–69. doi:https://doi.org/10.1080/19648189.2009.9693085.
- Porbaha, A., S. Shibuya, and T. Kishida. 2000. “State of the Art in Deep Mixing Technology: Part III-Geomaterial Characterization.” Ground Improvement, J. ISSMGE 4 (3): 91–110. doi:https://doi.org/10.1680/grim.2000.4.3.91.
- Sadek, S., S. Najjar, and A. Abboud. 2013. “Compressive Strength of Fibre-reinforced Lightly- Cement Stabilized Sand.” Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France.
- Safdar, M. (2018), “Monotonic Stress-Strain Behavior of Fiber Reinforced Cemented Toyoura Sand”, PhD diss., Western University, London, Ontario, Canada.
- Safdar, M., T. Newson, C. Schmidt, K. Sato, T. Fujikawa, and F. Shah. 2020. “Effect of Fibre and Cement Additives on the Small-Strain Stiffness Behavior of Toyoura Sand.” Sustainability 10468: 12. doi:https://doi.org/10.3390/su122410468.
- Safdar, M., T. Newson, C. Schmidt, K. Sato, T. Fujikawa, and F. Shah. 2021. “Shear Wave Velocity of Fibre Reinforced Cemented Toyoura Silty Sand.” Geomechanics and Engineering 25 (3): 207–219. doi:https://doi.org/10.12989/gae.2021.25.3.207. 10 May 2021.
- Salah-ud-din. 2012. “Behaviour of Fibre Reinforced Cemented Sand at High Pressures.” PhD thesis, University of Nottingham, UK.
- Santos, D. A., N. Consoli, and B. Baudet. 2010a. “The Mechanics of Fibre Reinforced Sand.” Ge’otechnique 60 (10): 791–799. doi:https://doi.org/10.1680/geot.8.P.159.
- Schmidt, Colin J. R. 2015. “Static and Dynamic Response of Silty Toyoura Sand with PVA Fibre and Cement Additives.” Electronic Thesis and Dissertation Repository. Paper 2841.
- Tang, C. S., B. Shi, and L. Z. Zhao. 2010. “Interfacial Shear Strength of Fiber Reinforced Soil.” Geotextiles and Geomembranes 28 (1): 54–62. doi:https://doi.org/10.1016/j.geotexmem.2009.10.001. 0266–1144.
- Terzaghi, K., and R. Peck. 1948. Soil Mechanics in Engineering Practice. New York: Wiley.
- Wang, Y. H., and S. C. Leung. 2008. “A Particulate-scale Investigation of Cemented Sand Behaviour.” Canadian Geotechnical Journal 45 (1): 29–44. doi:https://doi.org/10.1139/T07-070.
- Wang, Z.L., Y. F. Dafalias, X.S. Li, and F. I. Makdisi. 2002. “State Pressure Index for Modelling Sand Behaviour.” Journal of Geotechnical and Geoenvironmental Engineering 128 (6): 511–519. doi:https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(511).
- Whitlow, R. 2001. Basic Soil Mechanics. Dorchester: Pearson Education. 16-26/Classification of soils for engineering purposes/Pearson Education Ltd./Prentice Hall/