References
- Bahrami, A., and E. Gülcan. 2019. Investigating the high ash lignite processing with teetered bed separator. International Journal of Coal Preparation and Utilization 39:169–82. doi:https://doi.org/10.1080/19392699.2019.1583218.
- Chen, Y., W. Liu, K. Ma, and J. Yao. 2011. Numerical simulation of the flow field in the teetered bed separator. Journal of China University of Mining and Technology 40:608–11.
- Cornelissen, J. T., F. Taghipour, R. Escudié, N. Ellis, and J. R. Grace. 2007. CFD modelling of a liquid–solid fluidized bed. Chemical Engineering Science 62:6334–48. doi:https://doi.org/10.1016/j.ces.2007.07.014.
- Das, A., B. Sarkar, P. Biswas, and S. Roy. 2013. Performance prediction of floatex density separator in processing iron ore fines – A relative velocity approach. Mineral Processing and Extractive Metallurgy 118:78–84. doi:https://doi.org/10.1179/174328509x383926.
- Das, A., B. Sarkar, and S. P. Mehrotra. 2009. Prediction of separation performance of floatex density separator for processing of fine coal particles. International Journal of Mineral Processing 91:41–49. doi:https://doi.org/10.1016/j.minpro.2008.11.004.
- Dey, S. K., V. Ari, and A. Das. 2012. Processing of electronic waste in a counter current teeter-bed separator. Journal of Environment Manage 107:45–51. doi:https://doi.org/10.1016/j.jenvman.2012.04.018.
- Doroodchi, E., K. P. Galvin, and D. F. Fletcher. 2005. The influence of inclined plates on expansion behaviour of solid suspensions in a liquid fluidised bed—a computational fluid dynamics study. Powder Technology 156:1–7. doi:https://doi.org/10.1016/j.powtec.2005.05.057.
- Fosu, S., B. Awatey, W. Skinner, and M. Zanin. 2015. Flotation of coarse composite particles in mechanical cell vs. the fluidised-bed separator (The HydroFloat™). Minerals Engineering 77:137–49. doi:https://doi.org/10.1016/j.mineng.2015.03.011.
- Galvin, K. P. 1999. Dense medium separation using a teetered bed separator. Minerals Engineering 12:1059–81. doi:https://doi.org/10.1016/S0892-6875(99)00092-8.
- Galvin, K. P. 2002. Influence of a jigging action on the gravity separation achieved in a teetered bed separator. Minerals Engineering 15:1199–202. doi:https://doi.org/10.1016/S0892-6875(02)00211-X.
- Galvin, K. P., E. Doroodchi, A. M. Callen, N. Lambert, and S. J. Pratten. 2002. Pilot plant trial of the reflux classifier. Minerals Engineering 15:19–25. doi:https://doi.org/10.1016/S0892-6875(01)00193-5.
- Honaker, R. Q., and K. Mondal. 2000. Dynamic modeling of fine coal separations in a hindered-bed classifier. Coal Preparation 21:211–32. doi:https://doi.org/10.1080/07349340008945619.
- Kapure, G., C. Kari, S. M. Rao, and N. D. Rao. 2007. The feasibility of a slip velocity model for predicting the enrichment of chromite in a Floatex density separator. International Journal of Mineral Processing 82:86–95. doi:https://doi.org/10.1016/j.minpro.2006.11.004.
- Kiani, A., J. Zhou, and K. P. Galvin. 2015. Enhanced recovery and concentration of positively buoyant cenospheres from negatively buoyant fly ash particles using the inverted reflux classifier. Minerals Engineering 79:1–9. doi:https://doi.org/10.1016/j.mineng.2015.04.016.
- Kiani, A., J. Zhou, and K. P. Galvin. 2017. Detailed characterisation and separation of fly ash fed to the inverted reflux classifier. Fuel Processing Technology 155:114–23. doi:https://doi.org/10.1016/j.fuproc.2016.04.028.
- Kim, B. H., and M. S. Klima. 2004a. Development and application of a dynamic model for hindered-settling column separations. Minerals Engineering 17:403–10. doi:https://doi.org/10.1016/j.mineng.2003.11.013.
- Kim, B. H., and M. S. Klima. 2004b. Simulation of hindered-settling column separations for soil remediation. Journal of Environmental Science and Health, Part A 39:19–33. doi:https://doi.org/10.1081/ese-120027366.
- Kim, B. H., and M. S. Klima. 2004c. Simulation of hindered-settling column separations when processing fine anthracite refuse. Coal Preparation 24:261–75. doi:https://doi.org/10.1080/07349340490885006.
- Kohmuench, J. N., M. J. Mankosa, R. Q. Honaker, and R. C. Bratton. 2006. Applications of the crossflow teeter-bed separator in the U.S. coal industry. Minerals and Metallurgical Processing 23:187–95.
- Kumar, C. R., S. Mohanan, S. K. Tripathy, Y. Ramamurthy, T. Venugopalan, and N. Suresh. 2011. Prediction of process input interactions of floatex density separator performance for separating medium density particles. International Journal of Mineral Processing 100:136–41. doi:https://doi.org/10.1016/j.minpro.2011.05.011.
- Lettieri, P., R. Di Felice, R. Pacciani, and O. Owoyemi. 2006. CFD modelling of liquid fluidized beds in slugging mode. Powder Technology 167:94–103. doi:https://doi.org/10.1016/j.powtec.2006.06.012.
- Nguyentranlam, G., and K. P. Galvin. 2001. Particle classification in the reflux classifier. Minerals Engineering 14:1081–91. doi:https://doi.org/10.1016/S0892-6875(01)00113-3.
- Ozcan, O., and S. L. Ergun. 2017. Performance of teetered bed separator for non-coal applications. Separation Science and Technology 52:1486–95. doi:https://doi.org/10.1080/01496395.2017.1288745.
- Raghu Kumar, C., S. K. Bhoja, S. K. Tripathy, S. Mohanan, T. Venugopalan, and N. Suresh. 2013. Classification performance evaluation of floatex density separator for coal fines. Fuel 108:303–10. doi:https://doi.org/10.1016/j.fuel.2013.02.033.
- Reddy, R. K., and J. B. Joshi. 2009. CFD modeling of solid–liquid fluidized beds of mono and binary particle mixtures. Chemical Engineering Science 64:3641–58. doi:https://doi.org/10.1016/j.ces.2009.05.004.
- Richardson, J., and W. Zaki. 1954. Sedimentation and fluidization: Part-1. Transactions of the Institution of Chemical Engineering 32:35–53.
- Sarkar, B., and A. Das. 2010. A comparative study of slip velocity models for the prediction of performance of floatex density separator. International Journal of Mineral Processing 94:20–27. doi:https://doi.org/10.1016/j.minpro.2009.11.001.
- Sarkar, B., A. Das, and S. P. Mehrotra. 2008. Study of separation features in floatex density separator for cleaning fine coal. International Journal of Mineral Processing 86:40–49. doi:https://doi.org/10.1016/j.minpro.2007.10.002.
- Sarkar, B., A. Das, S. Roy, and S. K. Rai. 2013. In depth analysis of alumina removal from iron ore fines using teetered bed gravity separator. Mineral Processing and Extractive Metallurgy 117:48–55. doi:https://doi.org/10.1179/174328508x251851.
- Tran, Q. A., R. Stanger, W. Xie, J. Lucas, J. Yu, M. Stockenhuber, E. Kennedy, and T. Wall. 2016. Maceral separation from coal by the Reflux Classifier. Fuel Processing Technology 143:43–50. doi:https://doi.org/10.1016/j.fuproc.2015.11.009.
- Tripathy, S. K., M. K. Mallick, V. Singh, and Y. Rama Murthy. 2013. Preliminary studies on teeter bed separator for separation of manganese fines. Powder Technology 239:284–89. doi:https://doi.org/10.1016/j.powtec.2013.02.015.
- Umadevi, T., A. Kumar, A. Umashanker, R. Sah, and K. Marutiram. 2019. Performance evaluation of a laboratory floatex density separator and its comparison with a spiral concentrator. Mineral Processing and Extractive Metallurgy 1–8. doi:https://doi.org/10.1080/25726641.2019.1591793.
- Van Der Wielen, L. A. M., M. H. H. Van Dam, and K. C. A. M. Luyben. 1996. On the relative motion of a particle in a swarm of diffrerent particles. Chemical Engineering Science 51:995–1008. doi:https://doi.org/10.1016/0009-2509(95)00343-6.
- Wei, L., M. Sun, L. Meng, X. Zhu, and D. Li. 2016. Numerical studies of liquid-solid fluidized bed separator using CFD. Journal of the China Coal Society 41:1820–26. doi:https://doi.org/10.13225/j.cnki.jccs.2015.1776.
- Xia, Y., and F. F. Peng. 2014. Effect of structured plates on fine coal gravity separation in a liquid fluidized bed system. Engineering Applications of Computational Fluid Mechanics 1:164–80. doi:https://doi.org/10.1080/19942060.2007.11015190.
- Xia, Y. K. 2007. CFD simulation of fine particle gravity separation in hindered-settling bed separators. Chemical Product and Process Modeling 2:1–21. doi:https://doi.org/10.2202/1934-2659.1032.
- Xie, W., R. Stanger, J. Lucas, T. Wall, and M. Mahoney. 2013. Coal macerals separation by reflux classification and thermo-swelling analysis based on the computer aided thermal analysis. Fuel 103:1023–31. doi:https://doi.org/10.1016/j.fuel.2012.07.061.
- Zhu, X. S., J. L. Liu, C. Cao, Y. L. Dong, and T. Wei. 2020. Numerical studies on teeter bed separator for particle separation. energies 13:1–16. doi:https://doi.org/10.3390/en13082025.