An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

References

• Abbey, James D., Margaret G. Meloy, V. Daniel R. Guide, and Selin Atalay. 2014. “Remanufactured Products in Closed-Loop Supply Chains for Consumer Goods.” Production and Operations Management 24 (3): 488–503. doi:10.1111/poms.12238.
   Web of Science ®Google Scholar
• Adams, R. D., Andrew Collins, Duncan Cooper, Mark Wingfield-Digby, Archibald Watts-Farmer, Anna Laurence, Kayur Patel, Mark Stevens, and Rhodri Watkins. 2014. “Recycling of Reinforced Plastics.” Applied Composite Materials 21 (1): 263–284. doi:10.1007/s10443-013-9380-1.
   Web of Science ®Google Scholar
• Asmatulu, E., J. Twomey, and M. Overcash. 2013. “Recycling of Fiber-Reinforced Composites and Direct Structural Composite Recycling Concept.” Journal of Composite Materials 48 (5): 593–608. doi:10.1177/0021998313476325.
   Web of Science ®Google Scholar
• Bakar, M., and S. Rahimifard. 2008. “Ecological and Economical Assessment of End‐of‐Life Waste Recycling in the Electrical and Electronic Recovery Sector.” International Journal of Sustainable Engineering 1 (4): 261–277. doi:10.1080/19397030802576825.
   Google Scholar
• BSI 8887-2:2009. 2009. Design for Manufacture, Assembly, Disassembly and End-of-Life Processing (MADE).Terms and Definitions. Produced by British Standards Institute Technical Product Specification Committee (TDW/004/0-/05 Design for MADE BSI), British Standards Publications, Southam, 2010.
   Google Scholar
• Carberry, W. 2008. “Aero.” Boeing Commercial Magazine. http://www.boeing.com/commercial/aeromagazine/articles/qtr_4_08/pdfs/AERO_Q408.pdf.
   Google Scholar
• Cheung, Wai M., Robert Marsh, Paul W. Griffin, Linda B. Newnes, Antony R. Mileham, and John D. Lanham. 2015. “Towards Cleaner Production: A Roadmap for Predicting Product End-of-Life Costs at Early Design Concept.” Journal of Cleaner Production 87: 431–441. doi:10.1016/j.jclepro.2014.10.033.
   Web of Science ®Google Scholar
• European Commission. 2012. “Guidance on the Interpretation of Key Provisions of Directive 2008/98/EC on Waste.” http://ec.europa.eu/environment/waste/framework/pdf/guidance_doc.pdf.
   Google Scholar
• European Parliament and Council. 1999. “Council Directive 1999/31/EC of 26th April 1999 on the Landfill of Waste.” Official Journal of the European Communities L 182/1. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:31999L0031&from=en.
   Google Scholar
• European Parliament and Council. 2000a. “Directive 2000/53/EC of the European Parliament and Council on 18 September 2000 on End-of Life Vehicles.” Official Journal of the European Communities L269/34. http://eur-lex.europa.eu/resource.html?uri=cellar:02fa83cf-bf28-4afc-8f9f-eb201bd61813.0005.02/DOC_1&format=PDF.
   Google Scholar
• European Parliament and Council. 2000b. “Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the Incineration of Waste.” Official Journal of the European Communities L332/91. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32000L0076&from=EN.
   Google Scholar
• European Parliament and Council. 2006. “Regulation No 1013/2006 of the European Parliament and the Council of 14 June 2006 on Shipments of Waste.” Official Journal of the European Union L 190/1. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32006R1013&from=en.
   Google Scholar
• European Parliament and Council. 2008. “Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on Waste and Repealing Certain Directives.” Official Journal of the European Union L 312/3. Available from http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32008L0098&from=en
   Google Scholar
• European Parliament and Council. 2012. “Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE).” Official Journal of the European Union L 197/38. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2012:197:0038:0071:en:PDF.
   Google Scholar
• Gao, J. X. Chen, and D. Zheng. 2010. “Remanufacturing Oriented Adaptive Repair System for Worn Components.” In 5th International Conference on Responsive Manufacturing – Green Manufacturing (ICRM 2010), 13–18, Ningbo, China. doi:10.1049/cp.2010.0406.
   Google Scholar
• Giuntini, Ron, and Kevin Gaudette. 2003. “Remanufacturing: The Next Great Opportunity for Boosting US Productivity.” Business Horizons 46 (6): 41–48. doi:10.1016/S0007-6813(03)00087-9.
   Google Scholar
• Glavič, Peter, and Rebeka Lukman. 2007. “Review of Sustainability Terms and Their Definitions.” Journal of Cleaner Production 15 (18): 1875–1885. doi:10.1016/j.jclepro.2006.12.006.
   Web of Science ®Google Scholar
• Go, T., D. Wahab, M. Rahman, R. Ramli, and C. Azhari. 2011. “Disassemblability of End-of-Life Vehicle: A Critical Review of Evaluation Methods.” Journal of Cleaner Production 19 (13): 1536–1546. doi:10.1016/j.jclepro.2011.05.003.
   Web of Science ®Google Scholar
• Gray, C., and M. Charter. 2008. “Remanufacturing and Product Design.” International Journal of Product Development 6 (3/4): 375–392. doi:10.1504/IJPD.2008.020406.
   Google Scholar
• Gutowski, T., S. Sahni, A. Boustani, and S. Graves. 2011. “Remanufacturing and Energy Savings.” Environmental Science and Technology 45: 4540–4547. doi:10.1021/es102598b.
   PubMed Web of Science ®Google Scholar
• Hamzaoui-Essoussi, Leila, and Jonathan D. Linton. 2014. “Offering Branded Remanufactured/Recycled Products: At What Price?” Journal of Remanufacturing 4 (1): 1–15. doi:10.1186/s13243-014-0009-9.
   Google Scholar
• Hazen, Benjamin T., Robert E. Overstreet, L. Jones-Farmer, and Hubert S. Field. 2012. “The Role of Ambiguity Tolerance in Consumer Perception of Remanufactured Products.” International Journal of Production Economics 135 (2): 781–790. doi:10.1016/j.ijpe.2011.10.011.
   Web of Science ®Google Scholar
• Heil, J. P. 2011. “Study and Analysis of Carbon Fiber Recycling.” Masters thesis, North Carolina State University. http://repository.lib.ncsu.edu/ir/bitstream/1840.16/6885/1/etd.pdf.
   Google Scholar
• Howarth, Jack, Sada S. R. Mareddy, and Paul T. Mativenga. 2014. “Energy Intensity and Environmental Analysis of Mechanical Recycling of Carbon Fibre Composite.” Journal of Cleaner Production 81: 46–50. doi:10.1016/j.jclepro.2014.06.023.
   Web of Science ®Google Scholar
• Ijomah, W. 2002. “A Model-Based Definition of the Generic Remanufacturing Business Process.” PhD thesis, University of Plymouth. doi:10.026.1/601.
   Google Scholar
• Ijomah, W., and M. Danis. 2012. “Refurbushment and Reuse of WEEE.” In Waste Electrical and Electronic Equipment (WEEE) Handbook, edited by V. Goodship and Ab Stevels, 145–162. http://www.sciencedirect.com/science/book/9780857090898.10.1533/9780857096333.2.145
   Google Scholar
• Ijomah, W., C. McMahon, G. Hammond, and S. Newman. 2007. “Development of Design for Remanufacturing Guidelines to Support Sustainable Manufacturing.” Robotics and Computer-Integrated Manufacturing 23 (6): 712–719. doi:10.1016/j.rcim.2007.02.017.
   Web of Science ®Google Scholar
• Jahn, B., and E. Witten. 2013. Composites Market Report 2013. Federation of Reinforced Plastics. http://composites-germany.org/images/market-information/Market-Report-2013.pdf.
   Google Scholar
• Ke, Q., H.-C. Zhang, G. Liu, and B. Li. 2011. “Remanufacturing Engineering Literature Overview and Future Research Needs.” In Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International 437 Conference on Life Cycle Engineering, Braunschweig, Germany, edited by J. Hesselbach and C. Herrmann, Springer-Verlag Berlin Heidelberg. 437–442. doi:10.1007/978-3-642-19692-8_75.
   Google Scholar
• King, Andrew M., Stuart C. Burgess, Winnie Ijomah, and Chris A. Mcmahon. 2006. “Reducing Waste: Repair, Recondition, Remanufacture or Recycle?” Sustainable Development (December 2005) 267: 257–267. doi:10.1002/sd.271.
   Web of Science ®Google Scholar
• Liu, Yan, Jie Liu, Zhiwei Jiang, and Tao Tang. 2012. “Chemical Recycling of Carbon Fibre Reinforced Epoxy Resin Composites in Subcritical Water: Synergistic Effect of Phenol and KOH on the Decomposition Efficiency.” Polymer Degradation and Stability 97 (3): 214–220. doi:10.1016/j.polymdegradstab.2011.12.028.
   Web of Science ®Google Scholar
• Lund, R. T. 1985. “Remanufacturing: The Experience of the United States and Implications for Developing Countries.” UNDP Project Management Report No. 2, World Bank Technical Paper No. 31. Available from http://documents.worldbank.org/curated/en/1985/01/18526015/remanufacturing-experience-united-states-implications-developing-countries
   Google Scholar
• Lund, R. T. 1996. The Remanufacturing Industry: Hidden Giant, Boston University, Boston University Press, 7: 15–16.
   Google Scholar
• Lund, R. T., and W. M. Hauser. 2010. “Remanufacturing-an American Perspective.” In 5th International Conference on Responsive Manufacturing – Green Manufacturing  Ningbo, China, 1–6. doi:10.1049/cp.2010.0404.
   Google Scholar
• Marsh, George. 2009. “Carbon Recycling: A Soluble Problem.” Reinforced Plastics 53 (4): 22–27. doi:10.1016/S0034-3617(09)70149-3.
   Google Scholar
• Matsumoto, M., and W. Ijomah. 2013. “Remanufacturing.” In Handbook of Sustainable Engineering, edited by Joanne Kauffman and Kun-Mo Lee, 389–408.  Springer Netherlands, doi:10.1007/978-1-4020-8939-8.
   Google Scholar
• Matsumoto, M., and Y. Umeda. 2011. “An Analysis of Remanufacturing Practices in Japan.” Journal of Remanufacturing 1 (1): 2. doi:10.1186/2210-4690-1-2.
   Google Scholar
• Morin, Christelle, Anne Loppinet-Serani, François Cansell, and Cyril Aymonier. 2012. “Near- and Supercritical Solvolysis of Carbon Fibre Reinforced Polymers (CFRPs) for Recycling Carbon Fibers as a Valuable Resource: State of the Art.” Journal of Supercritical Fluids 66: 232–240. doi:10.1016/j.supflu.2012.02.001.
   Web of Science ®Google Scholar
• Ogi, Keiji, Takashi Nishikawa, Yasutaka Okano, and Ichiro Taketa. 2007. “Mechanical Properties of ABS Resin Reinforced with Recycled CFRP.” Advanced Composite Materials 16 (2): 181–194. doi:10.1163/156855107780918982.
   Web of Science ®Google Scholar
• OECD. 2015 “Municipal Waste Generation and Treatment.” Accessed August 07, 2015. https://stats.oecd.org/Index.aspx?DataSetCode=MUNW#
   Google Scholar
• Okayasu, Mitsuhiro, Tomohiro Yamazaki, Kohei Ota, Keiji Ogi, and Tetsuro Shiraishi. 2013. “Mechanical Properties and Failure Characteristics of a Recycled CFRP under Tensile and Cyclic Loading.” International Journal of Fatigue 55: 257–267. doi:10.1016/j.ijfatigue.2013.07.005.
   Web of Science ®Google Scholar
• Oliveux, Géraldine, Luke O. Dandy, and Gary A. Leeke. 2015. “Current Status of Recycling of Fibre Reinforced Polymers: Review of Technologies, Reuse and Resulting Properties.” Progress in Materials Science 72: 61–99. doi:10.1016/j.pmatsci.2015.01.004.
   Web of Science ®Google Scholar
• Perry, N., A. Bernard, F. Laroche, and S. Pompidou. 2012. “Improving Design for Recycling – Application to Composites.” CIRP Annals – Manufacturing Technology 61 (1): 151–154. doi:10.1016/j.cirp.2012.03.081.
   Web of Science ®Google Scholar
• Pickering, S. J. 2006. “Recycling Technologies for Thermoset Composite Materials-Current Status.” Composites Part A: Applied Science and Manufacturing 37 (8): 1206–1215. doi:10.1016/j.compositesa.2005.05.030.
   Web of Science ®Google Scholar
• Pigosso, D., E. Zanette, A. Filho, A. Ometto, and H. Rozenfeld. 2010. “Ecodesign Methods Focused on Remanufacturing.” Journal of Cleaner Production 18 (1): 21–31. doi:10.1016/j.jclepro.2009.09.005.
   Web of Science ®Google Scholar
• Pimenta, S., and S. Pinho. 2011. “Recycling Carbon Fibre Reinforced Polymers for Structural Applications: Technology Review and Market Outlook.” Waste Management 31 (2): 378–392. doi:10.1016/j.wasman.2010.09.019.
   PubMed Web of Science ®Google Scholar
• Pimenta, S., and S. Pinho. 2012. “The Effect of Recycling on the Mechanical Response of Carbon Fibres and Their Composites.” Composite Structures 94 (12): 3669–3684. doi:10.1016/j.compstruct.2012.05.024.
   Web of Science ®Google Scholar
• Shi, Jian, Kiyoshi Kemmochi, and Li Min Bao. 2012. “Research in Recycling Technology of Fiber Reinforced Polymers for Reduction of Environmental Load: Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse.” Advanced Materials Research 343–344: 142–149. doi:10.4028/www.scientific.net/AMR.343-344.142.
   Google Scholar
• Shi, Jian, Limin Bao, Ryouhei Kobayashi, Jun Kato, and Kiyoshi Kemmochi. 2012. “Reusing Recycled Fibers in High-Value Fiber-Reinforced Polymer Composites: Improving Bending Strength by Surface Cleaning.” Composites Science and Technology 72 (11): 1298–1303. doi:10.1016/j.compscitech.2012.05.003.
   Web of Science ®Google Scholar
• Smith-Gillespie, Aleyn, Ben Peace, Ben Walsh, and David Stewart. 2014. “Supporting Excellence in UK Remanufacturing.” Workshop at Coventry University, 1–14. Accessed August 07, 2015. http://www.carbontrust.com/media/627773/supporting-excellence-in-ukremanufacturing.pdf
   Google Scholar
• Song, Young S., Jae R. Youn, and Timothy G. Gutowski. 2009. “Life Cycle Energy Analysis of Fiber-Reinforced Composites.” Composites Part A: Applied Science and Manufacturing 40 (8): 1257–1265. doi:10.1016/j.compositesa.2009.05.020.
   Web of Science ®Google Scholar
• Sundin, Erik. 2004. “Product and Process Design for Successful Remanufacturing.” PhD thesis, Linkoping University.
   Google Scholar
• Suzuki, Tetsuya, and Jun Takahashi. 2005. “Prediction of Energy Intensity of Carbon Fiber Reinforced Plastics for Mass-Produced Passenger Cars.” In Ninth Japan International SAMPE Symposium JISSE-9, Tokyo, Japan, 14–19. http://j-t.o.oo7.jp/publications/051129/S1-02.pdf
   Google Scholar
• Watson, M. 2008. A Review of Literature and Research on Public Attitudes, Perceptions and Behaviour Relating to Remanufactured, Repaired and Reused Products. Report for the Centre of Remanufacturing and Reuse, University of Sheffield. http://www.remanufacturing.org.uk/pdf/story/1p143.pdf.
   Google Scholar
• Witik, Robert A., and Remy Teuscher, Michaud Véronique, Christian Ludwig, and Jan Anders E. Månson. 2013. “Carbon Fibre Reinforced Composite Waste: An Environmental Assessment of Recycling, Energy Recovery and Landfilling.” Composites Part A: Applied Science and Manufacturing 49: 89–99. doi:10.1016/j.compositesa.2013.02.009.
   Web of Science ®Google Scholar
• Yang, Yongxiang, Rob Boom, Brijan Irion, Derk Jan van Heerden, Pieter Kuiper, and Hans de Wit. 2012. “Recycling of Composite Materials.” Chemical Engineering and Processing: Process Intensification 51: 53–68. doi:10.1016/j.cep.2011.09.007
   Web of Science ®Google Scholar
• Zuidwijk, R., and H. Krikke. 2008. “Strategic Response to EEE Returns.” European Journal of Operational Research 191 (3): 1206–1222. doi:10.1016/j.ejor.2007.08.004.
   Web of Science ®Google Scholar