References
- Alister, C. M., and J. Wood 2014. The Potential of 3D Printing to Reduce the Environmental Impacts of Production.ECEEE Industrial Summer Study Proceedings. 213–221. 2-5 June, 2014, Arnhem, Netherlands.
- Attaran, M. 2017. “The Rise of 3-Dprinting: The Advantages of Additive Manufacturing over Traditional Manufacturing.” Business Horizons 60 (5): 677–688. doi:https://doi.org/10.1016/j.bushor.2017.05.011.
- Barros, K. D. S., and Zwolinski. 2016. “Influence of the Use/User Profile in the LCA of 3d Printed Products.” Procedia CIRP 50: 318–323. doi:https://doi.org/10.1016/j.procir.2016.05.005.
- Baumers, M., P. Dickens, C. Tuck, and R. Hague. 2016. “The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-push.” Tech Forec. Soc. Ch 102: 193–201. doi:https://doi.org/10.1016/j.techfore.2015.02.015.
- Berman, B. 2012. “3-D Printing: The New Industrial Revolution.” Bus. Horiz 55 (2): 155–162. doi:https://doi.org/10.1016/j.bushor.2011.11.003.
- Böckin, D., and A. M. Tillman. 2019. “Environmental Assessment of Additive Manufacturing in the Automotive Industry.” J. Clean Prod 226: 977–987. doi:https://doi.org/10.1016/j.jclepro.2019.04.086.
- Campolina, J., C. Sigrist, J. Paiva, A. Nunes, and V. Moris. 2017. “A Study on the Environmental Aspects of WEEE Plastic Recycling in A Brazilian Company. Inter.” J.Life Cycle Assess 22 (12): 1957–1968. doi:https://doi.org/10.1007/s11367-017-1282-2.
- Caviggioli, F., and E. Ughetto. 2019. “A Bibliometric Analysis of the Research Dealing with the Impact of Additive Manufacturing on Industry, Business, and Society.” Inter. J. Prod Econ 208: 254–268. doi:https://doi.org/10.1016/j.ijpe.2018.11.022.
- Chen, D., S. Heyer, S. Ibbotson, K. Salonitis, G. Steingrímsson, and S. Thiede. 2015. “Direct Digital Manufacturing: Definition, Evolution, and Sustainability Implications.” J.Clean. Prod 107: 615–625. doi:https://doi.org/10.1016/j.jclepro.2015.05.009.
- Chen, X., C. Shuai, Y. Wu, and Y. Zhang. 2021. “Understanding the Sustainable Consumption of Energy Resources in Global Industrial Sector: Evidences from 114 Countries.” Environ Imp. Assess. Rev 90: 106609. doi:https://doi.org/10.1016/j.eiar.2021.106609.
- Choi, J. 2018. “The Rise of 3D Printing and the Role of User Firms in the US: Evidence from Patent Data. Tech. Anal.” Strateg. Manag 30 (10): 1–15. doi:https://doi.org/10.1080/09537325.2018.1458979.
- Dwivedi, G., S. K. Srivastava, and R. K. Srivastava. 2017. “Analysis of Barriers to Implement Additive Manufacturing Technology in the Indian Automotive Sector. Inter Jphys. Distrib.” Logist. Manag 47 (10): 972–991. doi:https://doi.org/10.1108/IJPDLM-07-2017-0222.
- Equbal, A., S. Akhter, A. K. Sood, and I. Equbal. 2021. “The Usefulness of Additive Manufacturing (AM) in COVID-19.” Annals of 3D Printed Medicine 2: 100013. doi:https://doi.org/10.1016/j.stlm.2021.100013.
- Faludi, J., C. Bayley, S. Bhogal, and M. Iribarne. 2015. “Comparing Environmental Impacts of Additive Manufacturing Vs Traditional Machining via Life-cycle Assessment.” Rap. Prototyp. J 21 (1): 14–33. doi:https://doi.org/10.1108/RPJ-07-2013-0067.
- Ford, S., and M. Despeisse. 2016. “Additive Manufacturing and Sustainability: Anexploratory Study of the Advantages and Challenges.” J. Clean. Prod 137: 1573–1587. doi:https://doi.org/10.1016/j.jclepro.2016.04.150.
- Garcia, F. L., V. A. S. Moris, A. O. Nunes, and D. A. L. Silva. 2018. “Environmental Performance of Additive Manufacturing Process – An Overview.” Rap. Prototyp. J 24 (7), 1166–1177. https://doi.org/10.1108/RPJ-05-2017-0108 7
- Goedkoop, M. J., R. Heijungs, M. A. J. Huijbregts, A. M. De Schryver, J. Struijs, and R. Van Zelm (2009). ReCiPe 2008: A Life Cycle Impact Assessment Method Which Comprises Harmonised Category Indicators at the Midpoint and the Endpoint Level; First Edition Report I: Characterisation.
- Grassi, G., S. L. Spagnolo, and I. Paoletti. 2019. “Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates.” Add. Manuf 28: 439–444. doi:https://doi.org/10.1016/j.addma.2019.05.023.
- Guo, N., and M. C. Leu. 2013. “Additive Manufacturing: Technology, Applications and Research Needs.” Front. Mech. Eng 8 (3): 215–243. doi:https://doi.org/10.1007/s11465-013-0248-8.
- Gutowski, T., S. Jiang, D. Cooper, G. Corman, H. M. Manson, J. A. Schudeleit, T. Wegener, K. Sabelle, M. Ramos-Grez, and J. SekulicD.P. 2017. “Note on the Rate and Energy Efficiency Limits for Additive Manufacturing.” J. Ind. Ecol 21 (S1): S69–S79. doi:https://doi.org/10.1111/jiec.12664.
- International, A. S. T. M. 2014. “ASTM D638-14 Standard Test Method for Tensile Properties of Plastics.” West Conshohocken, PA; ASTM Int. doi:https://doi.org/10.1520/D0638-14.
- IPCC. 2021. “Summary for Policymakers. In: Climate Change 2021: The Physical Science Basis. Contribution of Working Group I to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change.” In edited by V. Masson-Delmotte, P. Zhai, A. Pirani, S. L. Connors, C. Péan, S. Berger, N. Caud, et al. Press: Cambridge University Press. 42p.
- ISO (International Organization for Standardization) (UNI EN) 14040. 2006. Environmental Management–life Cycle Assessment (Lca)—principles and Framework. Switzerland: Geneve.
- Jamshidinia, M., A. Sadek, M. Wang, and S. Kelly. 2015. “Additive Manufacturing of Steel Alloys Using Laser Powder-bed Fusion.” Advan. Mater. Process 173 (1): 20–24.
- Kellens, K., M. Baumers, T. G. Gutowski, W. Flanagan, R. Lifset, and J. R. Duflou. 2017. “Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications.” Journal of Industrial Ecology v21n (S1): S49–S68. doi:https://doi.org/10.1111/jiec.12629.
- Kellens, K., W. Dewulf, M. Overcash, M. Z. Hauschild, and J. R. Duflou. 2012a. “Methodology for Systematic Analysis and Improvement of Manufacturing Unit Process Life Cycle Inventory (UPLCI) CO2PE! Initiative (Cooperative Effort on Process Emissions in Manufacturing). Part 2: Case Studies. Inter.” J.Life Cycle Assess 17 (2): 242–251. doi:https://doi.org/10.1007/s11367-011-0352-0.
- Kellens, K., Dewulf, W., Overcash, M., Hauschild, M. Z., and J. R. Duflou. 2012b. Methodology for systematic analysis and improvementof manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing).Part 1: Methodology description. Inter. J. Life Cycle Assess. v. 17 (2): 242–251. https://doi.org/https://doi.org/10.1007/s11367-011-0340–4
- Kianian, B., and T. C. Larsson 2015. Additive Manufacturing Technology Potential: A Cleaner Manufacturing Alternative. In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. V004T05A001-V004T05A001). Am. Soc. Mech. Eng. 1-10. Boston, Massachusetts, USA.
- Kreiger, M., and J. M. Pearce. 2013. “Environmental Life Cycle Analysis of Distributed Three-Dimensional Printing and Conventional Manufacturing of Polymer Products. ACS Sustain.” Chem. Eng 1 (12): 1511–1519. doi:https://doi.org/10.1021/sc400093k.
- Kreiger, M. A., M. L. Mulder, A. G. Glover, and J. M. Pearce. 2014. “Life Cycle Analysis of Distributed Recycling of Post-consumer High Density Polyethylene for 3-D Printing Filament.” Journal of Cleaner Production 70: 90–96. doi:https://doi.org/10.1016/j.jclepro.2014.02.009.
- Laverne, F., R. Marquardt, F. Segonds, I. Koutiri, and N. Perry. 2019. “Improving Resources Consumption of Additive Manufacturing Use during Early Desgin Stages: A Case Study. Inter.” J. Of Sustain. Engin 126 (6): 365–375. https://doi.org/10.1080/19397038.2019.1620897.
- Leigh, D. K. 2012. A Comparison of Polyamide 11 Mechanical Properties between Laser Sintering and Traditional Molding. In Proceedings of the 24th solid freeform fabrication symposium, The University of Texas at Austin, Austin, TX, USA. 6–8.
- Lifset, R. 2017. “3D Printing and Industrial Ecology.” Journal of Industrial Ecology 21 (S1): S6–S8. doi:https://doi.org/10.1111/jiec.12669.
- Malshie, H., H. Nagarajan, Y. Pan, and K. Haapala 2015. Profile of Sustainability in Additive Manufacturing and Environmental Assessment of a Novel Stereolithography Process. Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing. Anais … ASME, Charlotte, North Carolina, USA. in: https://doi.org/10.1115/MSEC201 5–9371.
- Mani, M., K. W. Lyons, and S. K. Gupta. 2014. “Sustainability Characterization for Additive Manufacturing.” J Res Natl Inst Stand Technol: 119: 419–428. doi:https://doi.org/10.6028/jres.119.016.
- Mellor, S., L. Hao, and D. Zhang. 2014. “Additive Manufacturing: A Framework for implementation.Inter.” International Journal of Production Economics 149: 194–201. doi:https://doi.org/10.1016/j.ijpe.2013.07.008.
- Morrow, W. R., K. H. Qi, I. Mazumder,J., and S. J. Skerlos. 2007. “Environmental Aspects of Laser-based and Conventional Tool and Die Manufacturing. J.” Clean. Prod 15 (10): 932–943. doi:https://doi.org/10.1016/j.jclepro.2005.11.030.
- Nagarajan, H. P. N., H. A. Malshe, K. Haapala, and Y. R Pan. 2016. “Environmental Performance Evaluation of a Fastmask Image Projection Stereolithography Process through Time and Energy Modeling.” J. Manuf. Sci. Engin 138 (10): 101004. doi:https://doi.org/10.1115/1.4033756.
- Nagarajan, H. P. N., and K. R. Haapala. 2018. “Characterizing the Influence of Resource-energy-exergy Factors on the Environmental Performance of Additive Manufacturing Systems.” J. Manuf. Syst 48: 87–96. doi:https://doi.org/10.1016/j.jmsy.2018.06.005.
- Niaki, M. K., and F. Nonino. 2017. “Impact of Additive Manufacturing on Business Competitiveness: A Multiple Case Study, J.” Manuf. Tech. Manag 28 (1): 56–74. doi:https://doi.org/10.1108/JMTM-01-2016-0001.
- Niaki, M. K., S. A. Torabi, and F. Nonino. 2019. “Why Manufacturers Adopt Additive Manufacturing Technologies: The Role of Sustainability.” . Journal of Cleaner Production 222: 381–392. doi:https://doi.org/10.1016/j.jclepro.2019.03.019.
- Osorio, H. G., L. R. Huerta, A. C. Ruiz, H. R. Siller, and V. Borja. 2019. “Energy Consumption Analysis for Additive Manufacturing Processes.” Int J Adv Manuf 105 (1–4): 1735–1743. doi:https://doi.org/10.1007/s00170-019-04409-3.
- Paris, H., H. Mokhtarian, E. Coatané, M. Museau, and I. Flores Ituarte I. 2016. “Comparative Environmental Impacts of Additive and Subtractive Manufacturing Technologies.” CIRP Annals 65 (1): 29–32. doi:https://doi.org/10.1016/j.cirp.2016.04.036.
- Peng, T., K. Kellens, R. Tang, C. Chen, and G. Chen. 2018. “Sustainability of Additive Manufacturing: An Overwiev on Its Energy Demand and Environmental Impact. Add.” Manuf 21: 694–704. doi:https://doi.org/10.1016/j.addma.2018.04.022.
- Prado, G. B. V. D., D. V. Silva, A. L. Christoforo, J. A. Oliveira, E. A. V. Toso, and D. A. L. Silva. 2021. “Sustainable Scheduling: Development and Application of an Integrated Method Combining NEH Heuristic and Life Cycle Assessment.” J. Int. Sustain Eng 1–15. doi:https://doi.org/10.1080/19397038.2021.1970853.
- Priarone, P. C., G. Ingarao, R. Di Lorenzo, and L. Settineri. 2016. “Influence of Material Related Aspects of Additive and Subtractive Ti-6Al-4V Manufacturing on Energy Demand and Carbon Dioxide Emissions.” J. Ind. Ecol 21 (S1): S191eS202. doi:https://doi.org/10.1111/jiec.12523.
- Rejeski, D., F. Zhao, and Y. Huang. 2018. “Research Needs and Recommendations on Environmental Implications of Additive Manufacturing.” Add. Manuf 19: 21–28. doi:https://doi.org/10.1016/j.addma.2017.10.019.
- Saade, M. R. M., A. Yahia, and B. Amor. 2020. “How Has LCA Been Applied to 3D Printing? A Systematic Literature Review and Recommendations for Futures Studies.” J. Clean. Prod 244: 118803. doi:https://doi.org/10.1016/j.jclepro.2019.118803.
- Samykano, M., S. K. Selvamani, K. Kadirgama, W. K. Ngui, G. Kanagaraj, and K. Sudhakar. 2019. “Mechanical Property of FDM Printed ABS: Influence of Printing Parameters. Inter.” J. Adv. Manuf. Techn 102 (9–12): 2779–2796. doi:https://doi.org/10.1007/s00170-019-03313-0.
- Schiermeier, Q. 2011. Increased Flood Risk Linked to Global Warming. Nature 470: 316. https://doi.org/https://doi.org/10.1038/470316a.
- Senyana, L., and D. Cormier. 2014. “An Environmental Impact Comparison of Distributed and Centralized Manufacturing Scenarios.” Adv. Mater. Res 875-877: 1449–1453.
- Tang, Y., K. Mak, and Y. F. Zhao. 2016. “A Framework to Reduce Product Environmental Impact through Design Optimization for Additive Manufacturing.” Journal of Cleaner Production 137: 1560–1572. doi:https://doi.org/10.1016/j.jclepro.2016.06.037.
- Thompson, M. K., G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, et al. 2016. “Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints, CIRP Ann.” Manuf.Technol 65 (2): 737–760.
- Wheeler, T., and J. Von Braun. 2013. “Climate Change Impacts on Global Food Security.” Science 341 (6145): 508–513. doi:https://doi.org/10.1126/science.1239402.
- Yoon, H.-S., J.-Y. Lee, H.-S. Kim, M.-S. Kim, E.-S. Kim, Y.-J. Shin, W.-S. Chu, and A. S.-H. Ahn. 2014. “A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study. Inter.” J. Precis. Eng. Manuf. Green Technol 1 (3): 261–279. doi:https://doi.org/10.1007/s40684-014-0033-0.