Fabrication and characterization of microfiltration blended membranes

References

• B. Tansel, J. Regula, R. Shalewitz, Treatment of fuel oil and crude oil contaminated waters by ultrafiltration membranes. Desalination 102 (1995) 301–311.
   Web of Science ®Google Scholar
• Y.H. Wan, X.D. Wang, X.J. Zhang, Treatment of high concentration phenolic waste water by liquid membrane with N503 as mobile carrier, J. Membr. Sci. 135 (1997) 263–270.
   Google Scholar
• S. Mondal, S.R. Wickramasinghe, Produced water treatment by nanofiltration and reverse osmosis membranes. J. Membr. Sci. 322 (2008) 162–170.
   Web of Science ®Google Scholar
• C.O. M’Bareck, Q.T. Nguyen, S. Alexandre, I. Zimmerlin, Fabrication of ion-exchange ultrafiltration membranes for water treatment: I. Semi-interpenetrating polymer networks of polysulfone and poly(acrylic acid). J. Membr. Sci. 278 (2006) 10–18.
   Web of Science ®Google Scholar
• J. Wang, W. Ruan, J. Ji, K. Yao, Dead-end filtration properties of microporous polypropylene membranes with different gas permeation rates. Desalination 192 (2006) 68–73.
   Google Scholar
• R. Mülhaupt, Catalytic polymerization and post polymerization catalysis fifty years after the discovery of Ziegler’s catalysts, Macromol. Chem. Phys. 204 (2003) 289.
   Google Scholar
• M.E. Vanegas, R. Quijada, D. Serafini, Microporous membranes prepared via thermally induced phase separation from metallocenic syndiotactic polypropylenes. Polymer 50 (2009) 2081–2086.
   Google Scholar
• S.W. Song, J.M. Torkelson, Coarsening effects on microstructure formation in Isopycnic polymer solutions and membranes produced via thermally induced phase separation. Macromolecules 27 (1994) 6389–6397.
   Web of Science ®Google Scholar
• S.S. Rincón, Nuevos desarrollos en PP: Copolímeros heterofásicos de alto módulo. Revista Plásticos Modernos 83 (2002) 307.
   Google Scholar
• R.W. Baker, Membranes Technology and Its Applications. second edition ed. Wily, West Sussex, 2004.
   Google Scholar
• P.M. Atkinson, D.R. Lloyd, Anisotropic flat sheet membrane formation via TIPS: Thermal effects. J. Membr. Sci. 171 (2000) 1–18.
   Web of Science ®Google Scholar
• S.S. Kim, D.R. Lloyd, Microporous membrane formation via thermally-induced phase separation. III. Effect of thermodynamic interactions on the structure of isotactic polypropylene membranes. J. Membr. Sci. 64 (1991) 13–29.
   Web of Science ®Google Scholar
• T. Shimokawa, M. Shoda, Y. Sugano, Purification and characterization of two DyP Isozymes from Thanatephorus Cucumeris Dec 1 specifically expressed in an air-membrane surface bioreactor. J. Biosci. Bioeng. 107 (2009) 113–115.
   PubMedGoogle Scholar
• B. Veleirinho, F.A. Lopes-da-Silva, Application of electro spun Poly (ethylene terephthalate) nanofiber mat to apple juice clarification. Process Biochem. 44 (2009) 353–356.
   Google Scholar
• C. Charcosset, Preparation of emulsions and particles by membrane emulsification for the food processing industry. Food Eng. 92 (2009) 241–249.
   Web of Science ®Google Scholar
• A.J. Castro, US Pat. No. 4,247,498 (1981).
   Google Scholar
• D.R., Lloyd, S.S. Kim and K.E. Kinzer, Microporous membrane formation via thermally induced phases separation. II. Liquid–liquid phase separation, J. Membr. Sci. 64 (1991) 1.
   Google Scholar
• W. Yave, R. Quijada, D. Serafini, D.R. Lloyd, Effect of the polypropylene type on polymer–diluent phase diagrams and membrane structure in membranes formed via the TIPS process: Part I. Metallocene and Ziegler–Natta polypropylenes. J. Membr. Sci. 263 (2005) 146–153.
   Web of Science ®Google Scholar
• C.D. Rosa, F. Auriemma, R. Mulhaupt, Structure and physical properties of syndiotactic polypropylene: A highly crystalline thermoplastic elastomer. Polymer 37 (1996) 2627–2634.
   Google Scholar
• M.E. Vanegas, R. Quijada, D.serafini, Microporous membranes prepared via thermally induced phase separation from metallocenic syndiotactic polypropylenes, Polymer 50 (2009) 2081–2086.
   Google Scholar
• Y. Wang, J. Kim, K. Choo, Y. Lee, C. Lee, Ozone-induced graft polymerization onto polymer surface. J. Membr. Sci. 169 (2000) 269–276.
   Web of Science ®Google Scholar
• Q. Yang, Z.K. Xu, et al., Surface modification of polypropylene microporous membranes with a novel Glycopolymer. Chem. Mater. 17 (2005) 3050–3058.
   Web of Science ®Google Scholar
• Y. Hamid, B. Mehdi, N.K. Feriedoun, Synthesis and properties of novel thermoplastic poly (urethane-imide)s. Eur. Polym. J. 36 (2000) 2207–2211.
   Web of Science ®Google Scholar
• Q.W. Lu, C.W. Macosko, Comparing the compatibility of various functionalized polypropylenes with thermoplastic polyurethane (TPU). Polymer 45 (2004) 1981–1991.
   Web of Science ®Google Scholar
• T. Tang, X. Jing, B. Huang, Studies on compatibilization of polypropylene/thermoplastic polyurethane blends and mechanism of compatibilization, J. Macromol. Sci.-Phy. B. 33 (2006) 287–305.
   Google Scholar
• K. Wallheinke, P. Pötschke, H. Stutz, Influence of compatibilizer addition on particle size and coalescence in TPU/PP blends. J. Appl. Polym. Sci. 65 (1997) 2217–2226.
   Web of Science ®Google Scholar
• K. Wallheinke, P. Pötschke, C.W. Macosko, H. Stutz, Coalescence in blends of thermoplastic polyurethane with polyolefins. Polym. Eng. Sci. 39 (2004) 1022–1034.
   Google Scholar
• Y.R. Qiu, H. Matsuyama, Preparation and characterization of poly(vinyl butyral) hollow fiber membrane via thermally induced phase separation with diluent polyethylene glycol 200. Desalination 257 (2010) 117–123.
   Web of Science ®Google Scholar
• H. Matsuyama, M. Teramoto, M. Kuwana, Y. Kitamura, Formation of polypropylene particles via thermally induced phase separation. Polymer 41 (2000) 8673–8679.
   Google Scholar
• W. Yave, R. Quijada, M. Ulbricht, R. Benavente, Syndiotactic polypropylene as potential material for the preparation of porous membranes via thermally induced phase separation (TIPS) process. Polymer 46 (2005) 11582–11590.
   Google Scholar
• L. Singh, R. Singh, Swift heavy ion induced modifications in polypropylene. Nucl. Instrum. Methods Phys. Res. B. 225 (2004) 478–482.
   Web of Science ®Google Scholar
• A.K. Barick, D.K. Tripathy, Effect of nanofiber on material properties of vapor-grown carbon nanofiber reinforced thermoplastic polyurethane (TPU/CNF) nanocomposites prepared by melt compounding, Compos. A. 41 (2010) 1471–1482.
   Google Scholar
• C.O. Putman, U.K. Vaidya, Mechanisms of interfacial adhesion in metal–polymer composites—effect of chemical treatment, Compos. A. 42 (2011) 906–915.
   Google Scholar
• M. Olteanu, D. Achimescu, Z. Vuluga, V. Trandafir, Measurement and interpretation of wetting properties of new collagen-silicate biomaterial. Revue Roumaine de Chimie 53 (2008) 157–163.
   Google Scholar
• S. Raghav, Polymer filled nanoporous membranes, M.S. Thesis, Drexel University, USA, 2005.
   Google Scholar
• S.X. Liu, J.T. Kim, S. Kim, Effect of polymer surface modification on polymer–protein interaction via hydrophilic polymer grafting. JFS E: Food Eng. Phys. Prop. 73 (2008) 143–150.
   Google Scholar
• S.K.N. Kutty, G.B. Nando, Self adhesion of short Kevlar fibre-thermoplastic polyurethane composite, J. Adhes. Sci. Technol. 7 (1993) 105–113.
   Google Scholar
• S.K. De, J.R. White, Short Fibre: Polymer Composites. first edition ed. Woodhead, 1996.
   Google Scholar