Preparation of macroporous membrane using natural Kaolin and Tunisian lignite as a pore-forming agent

References

• Y. Dong, J.-E. Zhou, B. Lin, Y. Wang, S. Wang, L. Miao, Y. Lang, X. Liu, G. Meng, Reaction-sintered porous mineral-based mullite ceramic membrane supports made from recycled materials, J. Hazard. Mater. 172 (2009) 180–186.10.1016/j.jhazmat.2009.06.148
   PubMed Web of Science ®Google Scholar
• J.Z. Hamada, C. Ha, M.D. Kennedy, G.L. Amy, Application of ceramic membranes for seawater reverse osmosis (SWRO) pre-treatment, Desalin. Water Treat. 51 (2013) 25–27.
   Google Scholar
• S. Khemakhem, A. Larbot, R. Ben Amar, New ceramic microfiltration membranes from Tunisian natural materials: Application for the cuttlefish effluents treatment, Ceram. Int. 35 (2009) 55–56.10.1016/j.ceramint.2007.09.117
   Web of Science ®Google Scholar
• P. Pandey, R. Chauhan, Membranes for gas separation, Prog. Polym. Sci. 26 (2001) 853–893.10.1016/S0079-6700(01)00009-0
   Web of Science ®Google Scholar
• S. Chemlal, M. Sghyar, M. Rafiq, A. Larbot, L. Cot, Elaboration de membranes de spinelles de cobalt CoAl2O4 et de spinelle de manganèse MnAl2O4 pour l’ultrafiltration, Ann. Chim. Sci. Mater. 25 (2000) 57.
   Google Scholar
• Y. Li, X. Zhang, J. Wang, Preparation for ZSM-5 membranes by a two-stage varying temperature synthesis, Sep. Purif. Technol. 25 (2001) 459–466.10.1016/S1383-5866(01)00075-2
   Web of Science ®Google Scholar
• J.M. Benito, M.J. Sánchez, P. Pena, M.A. Rodríguez, Development of a new high porosity ceramic membrane for the treatment of bilge water, Desalination 214 (2007) 91–101.10.1016/j.desal.2006.10.020
   Web of Science ®Google Scholar
• K. Suresh, G. Pugazhenthi, Development of ceramic membranes from low-cost clays for the separation of oil–water emulsion, Desalin. Water Treat. 52 (2014) 1–13.
   Web of Science ®Google Scholar
• J. She, T.Ohji, Z.Y. Deng, Thermal shock behavior of porous silicon carbide ceramics, J. Am. Ceram. Soc. 85 (2002) 2125–2127.10.1111/jace.2002.85.issue-8
   Web of Science ®Google Scholar
• S.F. Corbin, J. Lee, X. Qiao, Influence of green formulation and pyrolyzable particulates on the porous microstructure and sintering characteristics of tape cast ceramics, J. Am. Ceram. Soc. 84 (2001) 41–47.10.1111/jace.2001.84.issue-1
   Web of Science ®Google Scholar
• J.J. Haslam, A.Q. Pham, B.W. Chung, J.F. DiCarlo, R.S. Glass, Effects of the use of pore formers on performance of an anode supported solid oxide fuel cell, J. Am. Ceram. Soc. 88 (2005) 513–518.10.1111/jace.2005.88.issue-3
   Web of Science ®Google Scholar
• A.R. Walpole, Z. Xia, C.W. Wilson, J.T. Triffitt, P.R. Wilshaw, A novel nano-porous alumina biomaterial with potential for loading with bioactive materials, J. Biomed. Mater. Res. Part A 90 (2009) 46–54.10.1002/jbm.a.v90a:1
   PubMed Web of Science ®Google Scholar
• T. Zeng, X. Dong, S.T. Chen, H. Yang, Processing and piezoelectric properties of porous PZT ceramics, Ceram. Int. 33 (2007) 395–399.10.1016/j.ceramint.2005.09.022
   Web of Science ®Google Scholar
• H.L. Zhang, J.F. Li, B.P. Zhang, Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents, Acta Mater. 55 (2007) 171–181.10.1016/j.actamat.2006.07.032
   Web of Science ®Google Scholar
• E. Gregorová, W. Pabst, Porous ceramics prepared using poppy seed as a pore-forming agent, Ceram. Int. 33 (2007) 1385–1388.10.1016/j.ceramint.2006.05.019
   Web of Science ®Google Scholar
• P. Colombo, Conventional and novel processing methods for cellular ceramics, Philos. Trans. R. Soc. A 364 (2006) 109–124.10.1098/rsta.2005.1683
   Web of Science ®Google Scholar
• A.R. Studart, U.T. Gonzenbach, E. Tervoort, L.J. Gauckler, Processing routes to macroporous ceramics: A review, J. Am. Ceram. Soc. 89 (2006) 1771–1789.10.1111/jace.2006.89.issue-6
   Web of Science ®Google Scholar
• Rui M. Novais, M.P. Seabra, J.A. Labrincha, Ceramic tiles with controlled porosity and low thermal conductivity by using pore-forming agents, Ceram. Int. 40 (2014) 11637–11648.10.1016/j.ceramint.2014.03.163
   Web of Science ®Google Scholar
• E. Gregorová, Z. Zivcová, W. Pabst, Porosity and pore space characteristics of starch-processed porous ceramics, J. Mater. Sci. 41 (2006) 6119–6122.10.1007/s10853-006-0475-z
   Web of Science ®Google Scholar
• Z. Zivcová, E. Gregorová, W. Pabst, Starch as a pore-forming and body-forming agent in ceramic technology, Starch 61 (2009) 495–502.
   Web of Science ®Google Scholar
• Z. Zivcová, E. Gregorová, W. Pabst, Low- and high-temperature processes and mechanisms in the preparation of porous ceramics via starch consolidation casting, Starch 62 (2010) 3–10.10.1002/star.v62:1
   Web of Science ®Google Scholar
• L.B. Garrido, M.P. Albano, L.M. Genova, K.P. Plucknett, Influence of starch type on characteristics of porous 3Y-ZrO2 prepared from a direct consolidation casting method, Mater. Res. 14 (2011) 39–45.10.1590/S1516-14392011005000016
   Web of Science ®Google Scholar
• F. Chen, L. Ma, L. Zhang, Pore structure control of starch processed silicon nitride porous ceramics with near-zero shrinkage, Mater. Lett. 65 (2011) 1410–1412.10.1016/j.matlet.2011.02.016
   Web of Science ®Google Scholar
• Z. Zivcová, J. Locs, M. Keuper, I. Sedlárova, M. Chmelicková, Micro-structural comparison of porous oxide ceramics from the system Al2–ZrO2 prepared with starch as a pore-forming agent, J. Eur. Ceram. Soc. 32 (2012) 2163–2172.10.1016/j.jeurceramsoc.2012.02.005
   Web of Science ®Google Scholar
• R.M. Khattab, M.M.S. Wahsh, N.M. Khalil, Preparation and characterization of porous alumina ceramics through starch consolidation casting technique, Ceram. Int. 38 (2012) 4723–4728.10.1016/j.ceramint.2012.02.057
   Web of Science ®Google Scholar
• M. Boaro, J.M. Vohs, J. Gorte, Synthesis of highly porous yttria-stabilized zirconia by tape-casting methods, J. Am. Ceram. Soc. 86 (2003) 395–400.10.1111/jace.2003.86.issue-3
   Web of Science ®Google Scholar
• S. Ding, S. Zhu, Y.P. Zeng, D. Jiang, Gas permeability of mullite-bonded porous silicon carbide ceramics, J. Mater. Sci. 42 (2007) 7171–7175.10.1007/s10853-007-1577-y
   Web of Science ®Google Scholar
• S. Ding, S. Zhu, Y.P. Zeng, D. Jiang, Fabrication of mullite-bonded porous silicon carbide ceramics by insitu reaction bonding, J. Eur. Ceram. Soc. 27 (2007) 2095–2102.10.1016/j.jeurceramsoc.2006.06.003
   Web of Science ®Google Scholar
• A. Sanson, P. Pinasco, E. Roncari, Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs, J. Eur. Ceram. Soc. 28 (2008) 1221–1226.10.1016/j.jeurceramsoc.2007.10.001
   Web of Science ®Google Scholar
• S. Sarikaya, F. Dogan, Effect of various pore formers on themicro-structural development of tape-cast porous ceramics, Ceram. Int. 39 (2013) 403–413.10.1016/j.ceramint.2012.06.041
   Web of Science ®Google Scholar
• Z. Zivcová, E. Gregorová, W. Pabst, Porous alumina ceramics produced with lycopodiums pores as pore-forming agents, J. Mater. Sci. 42 (2007) 8760–8764.10.1007/s10853-007-1852-y
   Web of Science ®Google Scholar
• Z. Zivcová, E. Gregorová, W. Pabst, Alumina ceramics prepared with new pore-forming agents, Process. Appl. Ceram. 2 (2008) 1–8.10.2298/PAC0801001Z
   Google Scholar
• R. Seržane, J. Locs, L. Berzina-Cimdina, R. Sadretdinovs, Development of porous ceramics by lycopodium using uniaxial pressing and sintering, Process. Appl. Ceram. 4 (2010) 231–235.10.2298/PAC1004231S
   Google Scholar
• C. Wang, T. Kasuga, M. Nogami, Macroporous calcium phosphate glass–ceramic prepared by two-step pressing technique and using sucrose as a pore former, J. Mater. Sci. Mater. Med. 16 (2005) 739–744.
   PubMed Web of Science ®Google Scholar
• A.M. Ray, H. Gautier, J.M. Bouler, P. Weiss, C. Merle, A new technological procedure using sucrose as porogen compound manu-facture porous biphasic calcium phosphate ceramics of appropriate micro-and macrostructure, Ceram. Int. 36 (2010) 93–93.10.1016/j.ceramint.2009.07.001
   Web of Science ®Google Scholar
• M.H.P. Silva, A.F. Lemos, I.R. Gibson, J.M. Ferreira, J.D. Santos. Porous glass reinforced hydroxyapatite materials produced with different organic additives, J. Non-Cryst. Solids 304 (2002) 286–292.10.1016/S0022-3093(02)01036-0
   Web of Science ®Google Scholar
• J. Bai, X. Yang, Y. Shi, S. Xu, J. Yang, Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent, Mater. Lett. 78 (2012) 192–194.10.1016/j.matlet.2012.03.046
   Web of Science ®Google Scholar
• B.A. Horri, C. Selomuya, H. Wang, Characteristics of Ni/YSZ ceramic anode prepared using carbon microspheres as a pore former, Int. J. Hydrogen Energy 37 (2012) 15311–15319.10.1016/j.ijhydene.2012.07.108
   Web of Science ®Google Scholar
• I. Hedfi, N. Hamdi, E. Srasra, M.A. Rodriguez, The preparation of micro-porous membrane from a Tunisian kaolin, Appl. Clay Sci. 101 (2014) 574–578.10.1016/j.clay.2014.09.021
   Web of Science ®Google Scholar
• A. Conesa, A. Fernandez-Roura, J.A. Pitarch, I. Vicente-Mingarro, M.A. Rodriguez, Separation of binary gas mixtures by means of sol-gel modified ceramic membranes. Prediction of membrane performance. J. Membr. Sci. 155 (1999) 123–131.10.1016/S0376-7388(98)00303-2
   Web of Science ®Google Scholar
• J. Feng, Y. Fan, H. Qi, N. Xu, Co-sintering synthesis of tubular bilayerα-alumina membrane, J. Membr. Sci. 288 (2007) 20–27.
   Web of Science ®Google Scholar