334
Views
23
CrossRef citations to date
0
Altmetric
Articles

Influence of grain size distribution and cement content on the strength and aging of treated sandy soils

, , &
Pages 882-902 | Published online: 24 May 2012

References

  • AFNOR. (1999). Détermination des références de compactage d’un matériau. NF P 94–093. France: Association Française de Normalisation.
  • AFNOR. (2003a). Geotechnical investigation and testing – Identification and classification of soil – Part 1: identification and description. NF EN ISO 14688–1. France: Association Française de Normalisation.
  • AFNOR. (2003b). Unbound and hydraulically bound mixtures – Part 41: test method for the determination of the compressive strength of hydraulically bound mixtures. NF EN 13286–41. France: Association Française de Normalisation.
  • Ahnberg, H., & Holm, G. (2009). Influence of laboratory procedures on properties of stabilised soil specimens. Deep Mixing ‘09, Okinawa.[AQ17].
  • Ahnberg , H. and Johanson , S-E . Increase in strength with time in soils stabilised with different types of binder in relation to the type and amount of reaction products . Paper presented at Deep Mixing ‘05 . Stockholm , Sweden. pp. 195 – 202 .
  • Ahnberg , H. , Johanson , S.-E. , Pihl , H. and Carlsson , T. 2003 . Stabilising effects of different binders in some Swedish soils . Ground Improvement , 7 : 9 – 23 .
  • Bujulu , P.M. and Grimstad , G . An innovative binder study and constitutive model for deep-mix stabilized quick clay . Paper presented at Deep Mixing ‘09 . Okinawa , Japan.
  • CDIT. (2002). The Deep Mixing Method – Principle, Design and Construction. The Netherlands: A.A. Balkema Publishers.
  • CEN. (2005). Cement – Part 1: Composition, specifications and conformity criteria for common cements. EN 197–1. Europe: European Committee for Standardisation.
  • Consoli , N.C. , Caberlon Cruz , R. , Floss , M.F. and Festugato , L. 2010 . Parameters controlling tensile and compressive strength of artificially cemented sand . Journal of Geotechnical and Geoenvironmental Engineering , 136 : 759 – 763 .
  • Consoli , N.C. , Foppa , D. , Festugato , L. and Salvagni Heineck , K. 2007 . Key parameters for strength control of artificially cemented soils . Journal of Geotechnical and Geoenvironmental Engineering , 133 : 197 – 205 .
  • Gerressen, F.-W., Schöpf, M., & Stötzer, E. (2009). CSM-cutter soil mixing – worldwide experiences of a young soil mixing method. Paper presented at Deep Mixing ‘09, Okinawa, Japan.
  • Guimond-Barrett, A., Szymkiewicz, F., Reiffsteck, P., Le Kouby, A., & Pantet, A. (2012). Effects of bentonite on the durability of cement-stabilised sands. International Symposium on Recent Research, Advances & Execution Aspects of Ground Improvement Works, Brussels (in press).
  • Haeri , S.M. , Hosseini , S.M. , Toll , D.G. and Yasrebi , S.S. 2005 . The behaviour of an artificially cemented sandy gravel . Geotechnical and Geological Engineering , 23 : 537 – 560 .
  • Holm, G. (2005). Keynote Lecture: Towards a sustainable society – recent advances in deep mixing. Presented at Deep Mixing‘05 (pp. K13–K24). Stockholm, Sweden.
  • Japanese Geotechnical Society (2000). Practice for making and curing stabilized soil specimens without compaction. No. JGS T 0821–2000. Japanese Geotechnical Society [in Japanese].
  • Jegandan, S., Liska, M., Osman, A.A.-M., & Al-Tabbaa, A. (2010). Sustainable binders for soil stabilisation. Journal of Ground Improvement, 163, 53–61.
  • Kawasaki, T., Niina, A., Saitoh, S., Suzuki, Y., & Honjo, Y. (1981). Deep mixing method using cement hardening agent. 10th International Conference on Soil Mechanics and Foundation Engineering (pp. 721–724). Stockholm, Sweden
  • Kitazume, M., & Nishimura, S. (2009). Influence of specimen preparation and curing conditions on unconfined compression behaviour of cement-treated clay. Paper presented at Deep Mixing ‘09, Okinawa, Japan.
  • Kitazume, M., Nishimura, S., Terashi, M., & Ohishi, K. (2009). International collaborative study task 1: investigation into practice of laboratory mix tests as means of QC/QA for deep mixing method. Paper presented at Deep Mixing ‘09, Okinawa, Japan.
  • Lade, P.V., Liggio, C.D., & Yamamuro, J.A., (1998). Effects of non-plastic fines on minimum and maximum void ratio of sand. Geotechnical Testing Journal, 21, 336–347.
  • Larsson, S. (2005). State of practice report-execution, monitoring and quality control. Paper presented at Deep Mixing’ 05 (pp. 732–786). Stockholm, Sweden.
  • Laville, S. (2009). Etude en laboratoire des propriétés mécaniques d’un mélange sable-ciment dans le cadre d’un chantier expérimental (Master 1 Géologie Géotechnique). Université Pierre et Marie Curie – CNAM.
  • LCPC-SETRA. (1992). Guide technique – Réalisation des remblais et des couches de forme. France:LCPC-SETRA.
  • Le Roux , A. and Rivière , A. 1969 . Traitement des sols argileux par la chaux . Bulletin de liaison des laboratoires routiers des Ponts et Chaussées , 40 : 59 – 96 .
  • Marzano, I.P., Al-Tabbaa, A., & Grisolia, M. (2009). Influence of sample préparation on the strength of cement-stabilised clays. Paper presented at Deep Mixing ‘09, Okinawa, Japan.
  • Porbaha , A. , Shibuya , S. and Kishida , T. 2000 . State of the art in deep mixing technology, Part III: Geomaterial characterization of deep mixing . Ground Improvement , 4 : 91 – 110 .
  • PWRC. (1999). Technical manual of deep mixing with special reference to on land applications. Public Works Research Center [in Japanese].
  • Reiffsteck , P. 2007 . Influence de la répartition granulométrique sur le comportement mécanique d’un sol . Bulletin de liaison des laboratoires routiers des Ponts et Chaussées , 268–269 : 83 – 103 . France
  • Rocher-Lacoste, F., Le Kouby, A., Szymkiewicz, F., Lechevallier, S., & Fraysse, B. (2010). The soil-cement column, an alternative foundation and soil improvement method: static load tests. 11th International Conference. Geotechnical Challenges (ICGC) in Urban Regeneration, DFI 2010, London.
  • Schnaid , F. , Prietto , P.D.M. and Consoli , N.C. 2001 . Characterization of cemented sand in triaxial compression . Journal of Geotechnical and Geoenvironmental Engineering , 127 : 857 – 868 .
  • Swedish Ministry of Transport, Public Works and Water Management. (2002). EuroSoilStab: development of design and construction methods to stabilise soft organic soils. Stockholm: P.W.a.W.M.
  • Szymkiewicz, F., Le Kouby, A., Reiffsteck, P., & Fanelli, S. (2010). Influence de la granulométrie sur la résistance à la compression d’un sol-ciment: comparaisons entre deux sols. AUGC 2010 (pp. 82–92). Paris:La Bourboule.
  • Szymkiewicz, F. (2011). Evaluation des propriétés mécaniques du matériau Soil-Mixing (PhD Thesis). Université Paris-Est.
  • Terashi, M. (1997). Theme lecture: deep mixing method – brief state of the art. 14th ICSMFE (pp. 2475–2478). Hamburg, Germany.
  • Terashi, M. (2003). The state of practice in deep mixing methods. Paper presented at 3rd International Specialty Conference on Grouting and Ground Treatment (pp. 25–49). New Orleans, USA.
  • Terashi , M. , Okumura , T. and Mitsumoto , T. 1977 . Fundamental properties of lime treated soil (1st report) . Port and Harbour Research Institute , 16 : 3 – 28 .
  • Topolnicki , M. 2004 . “ Chapter 9: In situ soil mixing ” . In Ground Improvement , Edited by: Kirsch , M.P.M.K. 331 – 423 . Abingdon , , UK : Spon Press .
  • Unikowski, Z. (1982). Influence des argiles sur les propriétés des mortiers de ciment. France:Rapports de recherche des Laboratoires des Ponts et Chaussées.
  • Westerberg, B., Pousette, K., Rogbeck, Y., Andersson, M., & Norrman, T. (2009). Laboratory tests of stabilised sulphide soil from northern Sweden. Paper presented at Deep Mixing ‘05 (pp. 169–177). Stockholm, Sweden.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.