Influences of temperature and water content on mechanical property of argillite

References

• Bemer, E., Longuemare, P., & Vincké, O. (2004). Poroelastic parameters of Meuse/Haute Marne argillites: Effect of loading and saturation states. Applied Clay Science, 26, 366–369.
   Web of Science ®Google Scholar
• Cekerevac, C., & Laloui, L. (2004). Experimental study of the thermal effects on the mechanical behaviour of a clay. International Journal for Numerical and Analytical Methods in Geomechanics, 28, 209–228.
   Web of Science ®Google Scholar
• Chiarelli, A. S. (2000). Etude experimentale et modelisation du comportement mecanique de l’argililte de l’Est[Experimental studies and modelling of mechanical behaviour of argillite of the east]. Thèse de Doctorat (Unpublished PhD thesis, in French), Université de Lille [University of Lille], France.
   Google Scholar
• Chiarelli, A. S., Shao, J. F., & Hoteit, N. (2003). Modeling of elastoplastic damage behaviour of a claystone. International Journal of Plasticity, 19, 23–45.
   Web of Science ®Google Scholar
• De Bruyn, D., & Thimus, J.-F. (1996). The influence of temperature on mechanical characteristics of Boom clay: The results of an initial laboratory programme. Engineering Geology, 41, 117–126.
   Web of Science ®Google Scholar
• Del Olmo, C., Fioravante, V., Gera, F., Hueckel, T., Mayor, I. C., & Pellegrini, R. (1996). Thermomechanical properties of deep argillaceous formations. Engineering Geology, 41, 87–101.
   Web of Science ®Google Scholar
• Escoffier, S. (2002). Caractérisation expérimentale du comportement hydromécanique des argilites de Meuse/Haute-Marne[Experimental characteristics and hydromechanical behaviour of Meuse/Haute-Marne argillite] (doctorat de l’INPL) [Unpublished PhD thesis, in French], University of INPL, France.
   Google Scholar
• Fityus, S. G., & Buzzi, O. (2009). The place of expansive clays in the framework of unsaturated soil mechanics. Applied Clay Science, 42, 150–155.
   Google Scholar
• Homand, F., Shao, J., Giraud, A., Auvray, C., & Hoxha, D. (2006). Pétrofabrique et propriété mécaniques des argilites [Petrofabric and mechanical properties of mudstones]. Comptes Rendues Geoscience, 338, 882–891.
   Web of Science ®Google Scholar
• Hoxha, D., Giraud, A., Homand, F., & Auvray, C. (2007). Saturated and unsaturated behaviour modelling of Meuse-Haute/Marne argillite. International Journal of Plasticity, 23, 733–766.
   Web of Science ®Google Scholar
• Hu, D. W., Zhou, H., Zhang, F., Shao, J. F., & Zhang, J. F. (2013). Modeling of inherent anisotropic behavior of partially saturated clayey rocks. Computers and Geotechnics, 48, 29–40.
   Web of Science ®Google Scholar
• Lebon, P., & Mouroux, B. (1999). Knowledge of the three French underground laboratory sites. Engineering Geology, 52, 251–256.
   Web of Science ®Google Scholar
• Lide, D. R. (2004). Handbook of chemistry and physics. Boca Raton, FL: CRC Press.
   Google Scholar
• Liu, X., Prikryl, R., & Pusch, R. (2011). THMC-testing of three expandable clays of potential use in HLW repositories. Applied Clay Science, 52, 419–427.
   Web of Science ®Google Scholar
• Ma, C., & Hueckel, T. (1992). Stress and pore pressure in saturated clay subjected to heat from radioactive waste: A numerical simulation. Canadian Geotechnical Journal, 29, 1087–1094.
   Web of Science ®Google Scholar
• Ma, C., & Hueckel, T. (1993). Thermomechanical effects on absorbed water in clays around a heat source. International Journal for Numerical and Analytical Methods in Geomechanics, 17, 175–196.
   Web of Science ®Google Scholar
• Magnenet, V., Auvray, C., Djordem, S., Homand, F., & Giraud, A. (2009). On the estimation of elastoplastic properties of rocks by indentation tests. International Journal of Rock Mechanics and Mining Sciences, 46, 635–642.
   Web of Science ®Google Scholar
• Morin, R., & Silva, A. J. (1984). The effects of high pressure and high temperature on some physical properties of ocean sediments. Journal of Geophysical Research, 89, 511–526.
   Web of Science ®Google Scholar
• Niandou, H., Shao, J. F., Henry, J. P., & Fourmaintraux, D. (1997). Laboratory investigation of the mechanical behaviour of Tournemire shale. International Journal of Rock Mechanics and Mining Sciences, 34, 3–16.
   Web of Science ®Google Scholar
• Pham, Q. T. (2007). Effets de la désaturation et de la resaturation sur l’argilite dans les ouvrages souterrains [Effects of desaturation and resaturation on the argillite in the underground excavation] (Unpublished PhD thesis, in French). Ecole polytechnique, France.
   Google Scholar
• Robinet, J. C. (2008). Mineralogie, porosite et diffusion des solutes dans l’argilite du callovo-oxfordien de bure (meuse/haute-marne, France) de l’echelle centimetrique a micrometrique [Minerology, porosity and solute diffusion in the argillite of Callovo-Oxfordien of Bure (Meuse/Haute-marne, France) of the scale from centimetric to micrometric] (Unpublished PhD thesis). University of Poitiers, France.
   Google Scholar
• Romero, E., Villar, M. V., & Lloret, A. (2005). Thermo-hydro-mechanical behaviour of two heavily overconsolidated clays. Engineering Geology, 81, 255–268.
   Web of Science ®Google Scholar
• Sultan, N., Delage, P., & Cui, Y. J. (2002). Temperature effects on the volume change behaviour of Boom clay. Engineering Geology, 64, 135–145.
   Web of Science ®Google Scholar
• Valès, F., Nguyen Minh, D., Gharbi, H., & Rejeb, A. (2004). Experimental study of the influence of the degree of saturation on physical and mechanical properties in Tournemire shale (France). Applied Clay Science, 26, 197–207.
   Web of Science ®Google Scholar
• Villar, M. V., & Lloret, A. (2004). Influence of temperature on the hydro-mechanical behaviour of a compacted bentonite. Applied Clay Science, 26, 337–350.
   Web of Science ®Google Scholar
• Zhang, C., & Rothfuchs, T. (2004). Experimental study of the hydro-mechanical behaviour of the Callovo-Oxfordian argillite. Applied Clay Science, 26, 325–336.
   Google Scholar
• Zhang, C., Rothfuchs, T., Su, K., & Hoteit, N. (2007). Experimental study of the thermo-hydro-mechanical behaviour of indurated clays. Physics and Chemistry of the Earth, 32, 957–965.
   Web of Science ®Google Scholar
• Zhang, F., Xie, S. Y., Hu, D. W., Shao, J. F., & Gatmiri, B. (2012). Effect of water content and structural anisotropy on mechanical property of claystone. Applied Clay Science, 69, 79–86.
   Web of Science ®Google Scholar
• Zhang, F., Zhang, Z. Z., Low, P. F., & Roth, C. B. (1993). The effect of temperature on the swelling of montmorillonite. Clay Minerals, 28, 25–31.
   Web of Science ®Google Scholar