EBROG and EBRIG methods for strengthening of RC beams by FRP sheets

References

• ACI Committee. (2008). Guide for the design and construction of externally bonded FRP system for strengthening concrete structures (ACI 440.2R-08). Farmington Hills, MI: Author.
   Google Scholar
• Advisory Committee on Technical Recommendations for Construction. (2006). Guide for the design and construction of externally bonded FRP systems for strengthening existing structures (CNR DT 200/2004). Rome: National Research Council.
   Google Scholar
• American Society of Testing and Materials. (2007). Practice for making and curing concrete test specimens in the laboratory (ASTM C 192/C 192M 07). West Conshohocken, PA: ASTM International.
   Google Scholar
• American Society of Testing and Materials. (2009). Standard test methods and definitions for mechanical testing of steel products (ASTM C A370 10). West Conshohocken, PA: ASTM International.
   Google Scholar
• Aram, M. R., Czaderski, C., & Motavalli, M. (2008). Debonding failure modes of flexural FRP-strengthened RC beams. Composites Part B: Engineering, 39, 826–841.
   Google Scholar
• Australia Standards. (2008). Design handbook for RC structures retrofitted with FRP and metal plates, beams and slabs. HB 305-2008. Sydney, Australia.
   Google Scholar
• Barros, J. A. O., Dias, S. J. E., & Lima, J. L. T. (2007). Efficacy of CFRP-based techniques for the flexural and shear strengthening of concrete beams. Cement & Concrete Composites, 29, 203–217.
   Web of Science ®Google Scholar
• Barros, J. A. O., & Fortes, A. S. (2005). Flexural strengthening of concrete beams with CFRP laminates bonded into slits. Cement & Concrete Composites, 27, 471–480.
   Web of Science ®Google Scholar
• Bilotta, A., Ludovico, M. D., & Nigro, E. (2011). FRP-to-concrete interface debonding: Experimental calibration of a capacity model. Composites Part B: Engineering, 42, 1539–1553.
   Google Scholar
• De Lorenzis, L., Nanni, A., & La Tegola, A. (2000). Strengthening of reinforced concrete structures with near surface mounted FRP rods. 3rd International Conference on Advanced Composite Materials in Bridges and Structures, Ottawa, Canada, pp. 521–528.
   Google Scholar
• De Lorenzis, L., & Teng, J. G. (2007). Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures. Composites Part B: Engineering, 38, 119–143.
   Web of Science ®Google Scholar
• fib Bulletin 14. (2001). Externally bonded FRP reinforcement for RC structures, technical report on the design and use of FRP EBR for reinforced concrete structures. Lausanne: International Federation for Structural Concrete.
   Google Scholar
• Hajihashemi, A., Mostofinejad, D., & Azhari, M. (2011). Investigation of RC beams strengthened with prestressed NSM CFRP laminates. Journal of Composites for Construction, 15, 887–895.
   Web of Science ®Google Scholar
• Hollaway, L. C. (2010). A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties. Construction and Building Materials, 24, 2419–2445.
   Web of Science ®Google Scholar
• Hosseini, A., & Mostofinejad, D. (2013). Experimental investigation into bond behavior of CFRP sheets attached to concrete using EBR and EBROG techniques. Composites Part B: Engineering, 51, 130–139.
   Google Scholar
• Meier, U., Deuring, M., Meier, H., & Schwegler, G. (1992). Strengthening of structures with CFRP laminates: Research and applications in Switzerland. Proceeding of the First International Conference on Advanced Composite Materials in Bridges and Structures Sherbrooke, Quebec, Canada, pp. 243–251.
   Google Scholar
• Mohamed Ali, M. S., Oehlers, D. J., Griffith, M. C., & Seracino, R. (2008). Interfacial stress transfer of near surface-mounted FRP-to-concrete joints. Engineering Structures, 30, 1861–1868.
   Google Scholar
• Mostofinejad, D., & Mahmoudabadi, E. (2010). Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams. Journal of Composites for Construction, 14, 804–811.
   Web of Science ®Google Scholar
• Mostofinejad, D., & Shameli, M. (2011). Performance of EBROG method under multilayer FRP sheets for flexural strengthening of concrete beams. Procedia Engineering, 14, 3176–3182.
   Google Scholar
• Mostofinejad, D., & Shameli, S. M. (2013). Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams. Construction and Building Materials, 38, 751–758.
   Web of Science ®Google Scholar
• Mostofinejad, D., Shameli, S. M., & Hosseini, A. (2012). Experimental study on the effectiveness of EBROG method for flexural strengthening of RC beams. Proceedings of Sixth International Conference on FRP Composites in Civil Engineering (CICE 2012), Rome, Italy.
   Google Scholar
• Mostofinejad, D., & Tabatabaei Kashani, A. (2013). Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams. Composites Part B: Engineering, 45, 1704–1713.
   Web of Science ®Google Scholar
• Oehlers, D. J., Haskett, M., Wu, C., & Seracino, R. (2008). Embedding NSM FRP plates for improved IC debonding resistance. Journal of Composites for Construction, 12, 635–642.
   Google Scholar
• Pendhari, S. S., Kant, T., & Desai, Y. M. (2008). Application of polymer composites in civil construction: A general review. Composite Structures, 84, 114–124.
   Google Scholar
• Rasheed, H. A., Harrison, R. R., Peterman, R. J., & Alkhrdaji, T. (2010). Ductile strengthening using externally bonded and near surface mounted composite systems. Composite Structures, 92, 2379–2390.
   Web of Science ®Google Scholar
• Saadatmanesh, H., & Ehsani, M. R. (1991). RC beams strengthened with GFRP plates. I: Experimental study. Journal of Structural Engineering, 117, 3417–3433.
   Web of Science ®Google Scholar
• Seracino, R., Raizal Saifulnaz, M. R., & Oehlers, D. J. (2007). Generic debonding resistance of EB and NSM plate-to-concrete joints. Journal of Composites for Construction, 11, 62–70.
   Web of Science ®Google Scholar
• Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. I: Review of debonding strength models. Engineering Structures, 24, 385–395.
   Web of Science ®Google Scholar
• Teng, J. G., Smith, S. T., Yao, J., & Chen, J. F. (2003). Intermediate crack-induced debonding in RC beams and slabs. Construction and Building Materials, 17, 447–462.
   Web of Science ®Google Scholar
• Van Den Einde, L., Zhao, L., & Seible, F. (2003). Use of FRP composites in civil structural applications. Construction and Building Materials, 17, 389–403.
   Google Scholar
• Wang, B., Teng, J. G., Lorenzis, L., Zhou, L., Ou, J., Jin, W., & Lau, K. T. (2009). Strain monitoring of RC members strengthened with smart NSM FRP bars. Construction and Building Materials, 23, 1698–1711.
   Web of Science ®Google Scholar
• Zhao, X. L., & Zhang, L. (2007). State-of-the-art review on FRP strengthened steel structures. Engineering Structures, 29, 1808–1823.
   Web of Science ®Google Scholar