584
Views
31
CrossRef citations to date
0
Altmetric
Articles

An experimental investigation into the effects of low plastic fines content on the behaviour of sand/silt mixtures

, , &
Pages 109-128 | Received 30 Jul 2013, Accepted 16 May 2014, Published online: 28 Jul 2014

References

  • Amini, F., & Qi, G. Z. (2000). Liquefaction testing of stratified silty sands. Journal of Geotechnical and Geoenvironmental Engineering, 126, 208–217.10.1061/(ASCE)1090-0241(2000)126:3(208)
  • Been, K., & Jefferies, M. G. (1985). A state parameter for sands. Geotechnique, 35, 99–112.10.1680/geot.1985.35.2.99
  • Belkhatir, M., Arab, A., Della, N., Missoum, H., & Schanz, T. (2010). Liquefaction resistance of Chlef river silty sand: Effect of low plastic fines and other parameters. Acta Polytechnica Hungarica, 7, 119–137.
  • Bouckovalas, G. D., Andrianopoulos, K. I., & Papadimitriou, A. G. (2003). A critical state interpretation for the cyclic liquefaction resistance of silty sands. Soil Dynamics and Earthquake Engineering, 23, 115–125.10.1016/S0267-7261(02)00156-2
  • Carraro, J. A. H., Murthy, T. G., Loukidis, D., Salgado, R., & Prezzi, M. (2007). Undrained monotonic response of clean and silty sands. Géotechnique, 57, 273–288.10.1680/geot.2007.57.3.273
  • Dasari, G. R., Ni, Q., Tan, T. S., & Hight, D. W. (2004). Contribution of fines to the compressive strength of mixed soils. Géotechnique, 54, 561–569.10.1680/geot.2004.54.9.561
  • Dash, H. K., & Sitharam, T. G. (2011). Undrained monotonic response of sand-silt mixtures: Effect of nonplastic fines. Geomechanics and Geoengineering, 6, 47–58.10.1080/17486021003706796
  • Huang, Y. T., Huang, A. B., Kuo, Y. C., & Tsai, M. D. (2004). A laboratory study on the undrained strength of a silty sand from Central Western Taiwan. Soil Dynamics and Earthquake Engineering, 24, 733–743.10.1016/j.soildyn.2004.06.013
  • Ishihara, K. (1993). Liquefaction and flow failure during earthquakes. Géotechnique, 43, 351–451.10.1680/geot.1993.43.3.351
  • Koester, J. P. (1994). Influence of fines type and content on cyclic strength. In S. Prakash & P. Dakoulas (Eds.), Ground Failures under Seismic Conditions (pp. 17–33). Atlanta, GA: Geotechnical Special Publications 44.
  • Kuerbis, R. H., Negussey, D., & Vaid, Y. P. (1988). Effect of gradation and fines content on the undrained response of sand. In D. J. A. Van Zyl (Ed.), Hydraulic fill structures (pp. 330–345). Fort Collins, CO: Geotechnical Special Publications 21.
  • Lade, P. V. (1992). Static instability and liquefaction of loose fine sandy slopes. Journal of Geotechnical Engineering, 118, 51–71.10.1061/(ASCE)0733-9410(1992)118:1(51)
  • Li, X. S., & Wang, Y. (1998). Linear representation of steady-state line for sand. Journal of Geotechnical and Geoenvironmental Engineering, 124, 1215–1217.10.1061/(ASCE)1090-0241(1998)124:12(1215)
  • Naeini, S. A., & Baziar, M. H. (2004). Effect of fines content on steady-state strength of mixed and layered samples of a sand. Soil Dynamics and Earthquake Engineering, 24, 181–187.10.1016/j.soildyn.2003.11.003
  • Papadopoulou, A., & Tika, T. (2008). The effect of fines on critical state and liquefaction resistance characteristics of non-plastic silty sands. Soils and Foundations, 48, 713–725.10.3208/sandf.48.713
  • Pitman, T. D., Robertson, P. K., & Sego, D. C. (1994). Influence of fines on the collapse of loose sands. Canadian Geotechnical Journal, 31, 728–739.10.1139/t94-084
  • Polito, C. P., & Martin II, J. R. (2001). Effects of nonplastic fines on the liquefaction resistance of sands. Journal of Geotechnical and Geoenvironmental Engineering, 127, 408–415.10.1061/(ASCE)1090-0241(2001)127:5(408)
  • Rahman, M. M., Lo, S.-C. R., & Gnanendran, C. T. (2008). On equivalent granular void ratio and steady state behaviour of loose sand with fines. Canadian Geotechnical Journal, 45, 1439–1456.10.1139/T08-064
  • Riemer, M. F., & Seed, R. B. (1997). Factors affecting apparent position of steady-state line. Journal of Geotechnical and Geoenvironmental Engineering, 123, 281–288.10.1061/(ASCE)1090-0241(1997)123:3(281)
  • Stamatopoulos, C. (2010). An experimental study of the liquefaction strength of silty sands in terms of the state parameter. Soil Dynamics and Earthquake Engineering, 30, 662–678.10.1016/j.soildyn.2010.02.008
  • Thevanayagam, S. (1998). Effect of fines and confining stress on undrained shear strength of silty sands. Journal of Geotechnical and Geoenvironmental Engineering, 124, 479–491.10.1061/(ASCE)1090-0241(1998)124:6(479)
  • Thevanayagam, S., Shenthan, T., Mohan, S., & Liang, J. (2002). Undrained fragility of clean sands, silty sands, and sandy silts. Journal of Geotechnical and Geoenvironmental Engineering, 128, 849–859.10.1061/(ASCE)1090-0241(2002)128:10(849)
  • Vaid, Y. P., & Negussey, D. (1988). Preparation of reconstituted sand specimens. In R. T. Donaghe, R. C. Chaney, & M. L. Silver (Eds.), Advanced triaxial testing of soil and rock (pp. 405–417). Philadelphia: ASTM STP 977.
  • Verdugo, R., & Ishihara, K. (1996). The steady state of sandy soils. Soils and Foundations, 36, 81–91.10.3208/sandf.36.2_81
  • Xenaki, V. C., & Athanasopoulos, G. A. (2003). Liquefaction resistance of sand-silt mixtures: An experimental investigation of the effect of fines. Soil Dynamics and Earthquake Engineering, 23, 183–194.
  • Yang, S. L., Sandven, R., & Grande, L. (2006a). Instability of sand-silt mixtures. Soil Dynamics and Earthquake Engineering, 26, 183–190.10.1016/j.soildyn.2004.11.027
  • Yang, S. L., Sandven, R., & Grande, L. (2006b). Steady-state lines of sand-silt mixtures. Canadian Geotechnical Journal, 43, 1213–1219.10.1139/t06-069
  • Yang, S. L., Lacasse, S., & Sandven, R. (2006). Determination of the transitional fines content of mixtures of sand and non-plastic fines. Geotechnical Testing Journal, 29, 102–107.
  • Zlatovic, S., & Ishihara, K. (1995). On the influence of nonplastic fines on residual strength. In K. Ishihara (Ed.), Proceedings of the 1st International Conference on Earthquake Geotechnical Engineering (pp. 239–244), Tokyo, Japan.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.