Microstructure and permeability of concrete with glass powder addition conserved in the sulphatic environment

References

• Abbas, M., Carcassès, M., & Ollivier, J.-P. (2000). The importance of gas permeability as addition to the compressive strength of concrete. Magazine of Concrete Research, 52, 1–6.10.1680/macr.2000.52.1.1
   Google Scholar
• ACI 116R-90. (2000, March 16). Cement and concrete terminology, technical documents, American concrete institute.
   Google Scholar
• Alonso, C., Andrade, C., Castellote, M., & Castro, P. (2000). Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cement and Concrete Research, 30, 1047–1055.10.1016/S0008-8846(00)00265-9
   Web of Science ®Google Scholar
• Behim, M., & Boucetta, A. (2009). Effet des additions micronisées sur l’écoulement des bétons autoplaçant (laitier de haut fourneau, filler calcaire et Poudre de verre). T. 2. Performance of materials, SBEIDCO, Algérie, October 12–14, 423–430.
   Google Scholar
• Bentalha, M. (2007). Influence de l’introduction de fibres métalliques sur le comportement différé d’une matrice cimentaire. Caractérisation - Comportement monotone – Microstructure ( Thèse doctorat d’état). Université Mentouri, Constantine, Algeria.
   Google Scholar
• Chaïd, R., Jauberthie, R., Boukhaled, A., & Talah, A. (2009). Endommagement, déformations et microstructure des BHP de pouzzolane. T. 2. Performance of materials, First International Conference on Sustainable Built Environement Infrastructures in Developing Countries, ENSET – Oran, October 12–14, 2009, 117–124.
   Google Scholar
• Carsana, M., Frassoni, M., & Bertolini, L. (2014). Comparison of ground waste glass with other supplementary cementitious materials. Cement and Concrete Composites, 45, 39–45.10.1016/j.cemconcomp.2013.09.005
   Web of Science ®Google Scholar
• Corinaldesi, V., Gnappi, G., Moriconi, G., & Montenero, A. (2004). Reuse of ground waste glass as aggregate for mortars. Waste Management, 25, 197–201.
   Web of Science ®Google Scholar
• De Castro, S., & de Brito, J. (2013). Evaluation of the durability of concrete made with crushed glass aggregates. Journal of Cleaner Production, 41, 7–14.
   Web of Science ®Google Scholar
• Du, H., & Tan, K.-H. (2013). Use of waste glass as sand in mortar: Part II – Alkali–silica reaction and mitigation methods. Cement and Concrete Composites, 35, 118–126.10.1016/j.cemconcomp.2012.08.029
   Web of Science ®Google Scholar
• Idir, R., Cyr, M., & Tagnit-Hamou, A. (2010). Use of fine glass as ASR inhibitor in glass aggregate mortars. Construction and Building Materials, 24, 1309–1312.10.1016/j.conbuildmat.2009.12.030
   Web of Science ®Google Scholar
• Kojima, T., Takagi, N., & Haruta, K. (2000). Expanding characteristics of mortar in glass powder produced from waste bottles, 673–682. 11th International Conference on Alkali Aggregate Reaction. Quebec, Canada, June 2000, 673–1282.
   Google Scholar
• Lea, S. (2004). Chemistry of cement and concrete, fourth Edition by Peter C. Hewlett. pp. 241–289. San Diego: Elsevier Science & Technology Books.
   Google Scholar
• Lee, G., Ling, T.-C., Wong, Y.-L., & Poon, C.-S. (2011). Effects of crushed glass cullet sizes, casting methods and pozzolanic materials on ASR of concrete blocks. Construction and Building Materials, 25, 2611–2618.10.1016/j.conbuildmat.2010.12.008
   Web of Science ®Google Scholar
• Matos, A.-M., & Sousa-Coutinho, J. (2012). Durability of mortar using waste glass powder as cement replacement. Construction and Building Materials, 36, 205–215.10.1016/j.conbuildmat.2012.04.027
   Web of Science ®Google Scholar
• Moesgaarda, M., Herfort, D., Steenberg, M., Kirkegaard, L.-F., & Yue, Y. (2011). Physical performances of blended cements containing calcium aluminosilicate glass powder and limestone. Cement and Concrete Research, 41, 359–364.10.1016/j.cemconres.2010.12.005
   Web of Science ®Google Scholar
• Nonnet, E., Lequeux, N., & Boch, P. (1999). Elastic properties of high alumina cement castables from room temperature to 1600°C. Journal of the European Ceramic Society, 19, 1575–1583.10.1016/S0955-2219(98)00255-6
   Web of Science ®Google Scholar
• Oliveira, R., de Brito, J., & Veiga, R. (2013). Incorporation of fine glass aggregates in renderings. Construction and Building Materials, 44, 329–341.10.1016/j.conbuildmat.2013.03.042
   Web of Science ®Google Scholar
• Penacho, P., de Brito, J., & Veiga, R.-M. (2014). Physico-mechanical and performance characterization of mortars incorporating fine glass waste aggregate. Cement and Concrete Composites, 50, 47–59.10.1016/j.cemconcomp.2014.02.007
   Web of Science ®Google Scholar
• Platret, G. (2002). Suivi de l’hydratation du ciment et de l’évolution des phases solides dans les bétons par analyse thermique, caractéristiques microstructurales et propriétés relatives à la durabilité des bétons. Méthodes de mesure et d’essai de laboratoire, In Méthode d’essai n° 58, Laboratoire Central des Ponts et Chaussées, 2002.
   Google Scholar
• Roz-Ud-Din, N., & Parviz, S. (2012). Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement. Construction and Building Materials, 29, 368–377.
   Web of Science ®Google Scholar
• Scherer, K.-R. (1995). Cross-cultural patterns. In D. Levinson, J. Ponzetti, & P. Jorgenson (Eds.), Encyclopedia of human emotions (Vol. 1, pp. 147–156). New York, NY: Macmillan.
   Google Scholar
• Schwarz, N., Cam, H., & Neithalath, N. (2008). Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash. Cement and Concrete Composites, 30, 486–496.10.1016/j.cemconcomp.2008.02.001
   Web of Science ®Google Scholar
• Schwarz, N., & Neithalath, N. (2008). Influence of a fine glass powder on cement hydration: comparison to fly ash and modelling the degree of hydration. Cement and Concrete Research, 38, 429–436.10.1016/j.cemconres.2007.12.001
   Web of Science ®Google Scholar
• Serpa, D., Santos Silva, A., de Brito, J., Pontes, J., & Soares, D. (2013). ASR of mortars containing glass. Construction and Building Materials, 47, 489–495.
   Web of Science ®Google Scholar
• Shayan, A., & Xu, A. (2005). Performance of glass powder as a pozzolanic material in concrete: A field trial on concrete slabs. Cement and Concrete Research, 36, 457–468.
   Web of Science ®Google Scholar
• Shi, C., Wu, Y., Riefler, C., & Wang, H. (2005). Characteristics and pozzolanic reactivity of glass powder. Cement and Concrete Research, 35, 987–993.10.1016/j.cemconres.2004.05.015
   Web of Science ®Google Scholar
• Tagnit, A., & Nkinamubanzib, P.-C. (2001). Les ajouts cimentaires et le développement durable, journée d’étude technique, 19 septembre 2001, Note trimestrielle d’information du Centre d’Etudes et de Services Technologiques de l’Industrie des Matériaux de Construction, CETIM, Algérie.
   Google Scholar
• Taha, B., & Nounu, G. (2007). Using lithium nitrate and pozzolanic glass powder in concrete as ASR suppressors. Cement and Concrete Composites, 30, 497–505.
   Web of Science ®Google Scholar
• Wang, H., & Huang, W. (2010). Durability of self-consolidating concrete using waste LCD glass. Construction and Building Materials, 24, 1008–1013.10.1016/j.conbuildmat.2009.11.018
   Web of Science ®Google Scholar
• Yammine, J. (2007). Rhéologie des bétons fluides à hautes performances : relations entre formulations, propriétés rhéologiques, physico-chimie et propriétés mécaniques. Thèse de Doctorat de l’Ecole Normale Supérieure de Cachan, ENSC, France.
   Google Scholar
• Zeroub, H. (2012). Valorisation du verre dans l’élaboration de béton durable (Approche expérimentale). Magister en sciences et génie des matériaux (Option : Physico-chimie des matériaux minéraux), Algérie, 2012.
   Google Scholar
• Zuber, B., & Marchand, J. (2004). Predicting the volume instability of hydrated cement systems upon freezing using poro-mechanics and local phase equilibria. Materials and Structures, 37, 257–270.10.1617/14165
   Web of Science ®Google Scholar