Investigation of the mechanical behaviour of metakaolin-based sandcrete mixtures

References

• Anagnostopoulos, C. S. (2007). Cement-clay grouts modified with acrylic resin or methyl methacrylate ester: Physical and mechanical properties. Construction and Building Materials , 21 , 252–257.10.1016/j.conbuildmat.2005.12.007
   Web of Science ®Google Scholar
• Aniculăesi, M. , Lungu, I. , & Stanciu, A. (2013). Some effects of eco-cement stabilization of expansive soils on critical state parameters. Environmental Engineering and Management Journal , 11 , 769–778.
   Google Scholar
• ASTM C39/C39M-14 . (2000). Standard test method for compressive strength of cylindrical concrete specimens, Annual Book of ASTM Standards , 4 , 24–29.
   Google Scholar
• ASTM C469-94 . (1994). Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression . ASTM Standards, p. 4.
   Google Scholar
• ASTM C873/C873M-15 . (2015). Standard test method for compressive strength of concrete cylinders cast in place in cylindrical molds . West Conshohocken, PA: ASTM International. Retrieved from www.astm.org
   Google Scholar
• Behera, M. , Bhattacharyya, S. K. , Minocha, A. K. , Deoliya, R. , & Maiti, S. (2014). Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review. Construction and Building Materials , 68 , 501–516.10.1016/j.conbuildmat.2014.07.003
   Web of Science ®Google Scholar
• Bijan, E. , & Kaveh, A. (2014). A novel approach in estimation of the soilcrete column’s diameter and optimization of the high pressure jet grouting using adaptive neuro fuzzy inference system (ANFIS). Open Journal of Geology , 4 , 386–398. Article ID: 48998. doi:10.4236/ojg.2014.48030
   Google Scholar
• Bouchelaghem, F. , & Almosni, A. (2003). Experimental determination of the longitudinal dispersivity during the injection of a micro-cement grout in a one-dimensional soil column. Transport in Porous Media , 52 , 67–94.10.1023/A:1022376225651
   Web of Science ®Google Scholar
• Coulter, S. , & Martin, C. D. (2006). Single fluid jet-grout strength and deformation properties. Tunnelling and Underground Space Technology , 21 , 690–695.10.1016/j.tust.2005.12.136
   Web of Science ®Google Scholar
• Denis, A. , Attar, A. , Breysse, D. , & Chauvin, J. J. (2002). Effect of coarse aggregate on the workability of sandcrete. Cement and Concrete Research , 32 , 701–706.10.1016/S0008-8846(01)00746-3
   Web of Science ®Google Scholar
• Etxeberria, M. , Vázquez, E. , Marí, A. , & Barra, M. (2014). Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research , 37 , 735–742.
   Google Scholar
• Evangelista, L. , & de Brito, J. (2014). Concrete with fine recycled aggregates: A review. European Journal of Environmental and Civil Engineering , 18 , 129–172.10.1080/19648189.2013.851038
   Web of Science ®Google Scholar
• Fang, Y.-S. , Kuo, L.-Y. , & Wang, D.-R . (2004). Properties of soilcrete stabilized with Jet grouting. In Proceedings of the Fourteenth International Offshore and Polar Engineering Conference – ISOPE , Toulon, France, May 23–28, pp. 696–702.
   Google Scholar
• Huang, W. H. (1997). Properties of cement-fly ash grout admixed with bentonite, silica fume, or organic fiber. Cement and Concrete Research , 27 , 395–406.10.1016/S0008-8846(97)00032-X
   Web of Science ®Google Scholar
• Kakali, G. , Perraki, T. , Tsivilis, S. , & Badogiannis, E. (2001). Thermal treatment of kaolin: The effect of mineralogy on the pozzolanic activity. Applied Clay Science , 20 , 73–80.10.1016/S0169-1317(01)00040-0
   Web of Science ®Google Scholar
• Koenders, E. A. B. , & Enzo Martinelli, M. P. (2014). Compressive strength and hydration processes of concrete with recycled aggregates. Cement and Concrete Research , 56 , 203–212.
   Web of Science ®Google Scholar
• Kolovos, K. G. , Asteris, P. G. , Cotsovos, D. M. , Badogiannis, E. , & Tsivilis, S. (2013). Mechanical properties of soilcrete mixtures modified with metakaolin. Construction and Building Materials , 47 , 1026–1036.10.1016/j.conbuildmat.2013.06.008
   Web of Science ®Google Scholar
• Kostuch, J. A. , Walter, G. V. , & Jones, T. R. (2000). High performance concretes containing Metakaolin – a review. In Proceedings of the International Conference – Concrete 2000 (Vol. 2, pp. 1799–1811). Dundee, UK .
   Google Scholar
• Lo Presti, D. (2013). Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review. Construction and Building Materials , 49 , 863–881. doi:10.1016/j.conbuildmat.2013.09.007
   Web of Science ®Google Scholar
• Medina, C. , Zhu, W. , Howind, T. , Sánchez de Rojas, M. I. , & Frías, M. (2014). Influence of mixed recycled aggregate on the physical-mechanical properties of recycled concrete. Journal of Cleaner Production , 68 , 216–225.10.1016/j.jclepro.2014.01.002
   Web of Science ®Google Scholar
• Mikkelsen, P. E. (2002). Cement–bentonite grout backfill for borehole instruments. Geotechnical Instrumentation News , 20 , 38–42.
   Google Scholar
• Mohammed, B. , & Cheeseman, C. R. (2011). Use of oil drill cuttings as an alternative raw material in sandcrete blocks. Waste and Biomass Valorization , 2 , 373–380.10.1007/s12649-011-9089-z
   Web of Science ®Google Scholar
• Nadeem, A. , Memon, S. A. , & Yiu Lo, T. (2013). Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures. Construction and Building Materials , 38 , 338–347.10.1016/j.conbuildmat.2012.08.042
   Web of Science ®Google Scholar
• Neville, A. M. (1996). Properties of concrete (4th ed.). Harlow: Addison Wesley Longman.
   Google Scholar
• Nguyen, L. D. , Fatahi, B. , & Khabbaz, H. (2014). A constitutive model for cemented clays capturing cementation degradation. International Journal of Plasticity , 56 , 1–18. doi:10.1016/j.ijplas.2014.01.007
   Web of Science ®Google Scholar
• Nikbakhtan, B. , & Ahangari, K. (2010). Field study of the influence of various jet grouting parameters on soilcrete unconfined compressive strength and its diameter. International Journal of Rock Mechanics and Mining Sciences , 47 , 685–689.10.1016/j.ijrmms.2010.03.004
   Web of Science ®Google Scholar
• Nikbakhtan, B. , Ahangari, K. , & Rahmani, N. (2010). Estimation of jet grouting parameters in Shahriar dam. Iranian Journal of Science and Technology , 20 , 472–477.
   Google Scholar
• Nikbakhtan, B. , & Osanloo, M. (2009). Effect of grout pressure and grout flow on soil physical and mechanical properties in jet grouting operations. International Journal of Rock Mechanics and Mining Sciences , 46 , 498–505.10.1016/j.ijrmms.2008.10.005
   Web of Science ®Google Scholar
• Omoregie, A. , & Alutu, O. E. (2006). The influence of fine aggregate combinations on particle size distribution, grading parameters, and compressive strength of sandcrete blocks. Canadian Journal of Civil Engineering , 33 , 1271–1278.10.1139/l06-059
   Web of Science ®Google Scholar
• Ortiz, O. , Castells, F. , & Sonnemann, G. (2009). Sustainability in the construction industry: A review of recent developments based on LCA. Construction and Building Materials , 23 , 28–39. doi:10.1016/j.conbuildmat.2007.11.012
   Web of Science ®Google Scholar
• Park, Y. S. , & Suh, J. K. (2008). Comparative study on compressive strength of concrete with new sand-cap and neoprene pad. International Journal of Concrete Structures and Materials , 2 , 15–19.
   Google Scholar
• Pavlović, M. N. , Cotsovos, D. M. , Dedić, M. M. , & Savidu, A . (2010). Reinforced jet-grouted piles. Part 1: Analysis and design. Proceedings of the Institution of Civil Engineers-Structures B , 163 , 299–308.
   Web of Science ®Google Scholar
• Pavlović, M. N. , Cotsovos, D. M. , Dedić, M. M. , & Savidu, A . (2010). Reinforced jet-grouted piles. Part 2: materials and tolerances. Proceedings of the Institution of Civil Engineers-Structures B , 163 , 309–315.
   Web of Science ®Google Scholar
• Schneider, M. , Romer, M. , Tschudin, M. , & Bolio, H. (2011). Sustainable cement production – present and future. Cement and Concrete Research , 41 , 642–650.10.1016/j.cemconres.2011.03.019
   Web of Science ®Google Scholar
• Sheen, Y. N. , Huang, L. J. , Wang, H. Y. , & Le, D. H. (2014). Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag. Construction and Building Materials , 54 , 1–9.10.1016/j.conbuildmat.2013.12.049
   Web of Science ®Google Scholar
• Silva, R. V. , de Brito, J. , & Dhir, R. K. (2014). Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Construction and Building Materials , 65 , 201–217. doi:10.1016/j.conbuildmat.2014.04.117
   Web of Science ®Google Scholar
• Soares, D. , de Brito, J. , Ferreira, J. , & Pacheco, J. (2014). Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance. Construction and Building Materials , 71 , 263–272.10.1016/j.conbuildmat.2014.08.034
   Web of Science ®Google Scholar
• Sonebi, M. , Lachemi, M. , & Hossain, K. M. A. (2013). Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture. Construction and Building Materials , 38 , 126–138.10.1016/j.conbuildmat.2012.07.102
   Web of Science ®Google Scholar
• Song, I. H. , & Ryou, J. S. (2014). Hybrid techniques for quality improvement of recycled fine aggregate. Construction and Building Materials , 72 , 56–64.10.1016/j.conbuildmat.2014.08.041
   Web of Science ®Google Scholar
• Tam, V. W. Y. , Gao, X. F. , & Tam, C. M. (2005). Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cement and Concrete Research , 35 , 1195–1203.10.1016/j.cemconres.2004.10.025
   Web of Science ®Google Scholar
• Tan, O. , Zaimoglu, A. S. , Hinislioglu, S. , & Altun, S. (2005). Taguchi approach for optimization of the bleeding on cement-based grouts. Tunnelling and Underground Space Technology , 20 , 167–173.10.1016/j.tust.2004.08.004
   Web of Science ®Google Scholar
• Tinoco, J. , Gomes Correia, A. , & Cortez, P. (2014). Support vector machines applied to uniaxial compressive strength prediction of jet grouting columns. Computers and Geotechnics , 55 , 132–140.10.1016/j.compgeo.2013.08.010
   Web of Science ®Google Scholar
• Topçu, B. , & Firat Günçan, N. (1995). Using waste concrete as aggregate. Cement and Concrete Research , 25 , 1385–1390.
   Web of Science ®Google Scholar
• Walraven, J. C. (1980). AGGREGATE INTERLOCK: A theoretical and experimental analysis (PhD thesis). Delft Institute of Technology, Delft.
   Google Scholar
• Walraven, J. C. (1981). Fundamental analysis of aggregate interlock. ASCE Journal of the Structural Division , 107 , 2245–2270.
   Web of Science ®Google Scholar
• Wenapere, D. A. , & Ephraim, M. E. (2009). Physico-mechanical behaviour of sandcrete block masonry units. Journal of Building Appraisal , 4 , 301–309.10.1057/jba.2009.8
   Google Scholar
• Xiao, J. , Li, W. , Corr, D. J. , & Shah, S. P. (2013). Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete. Cement and Concrete Research , 52 , 82–99.10.1016/j.cemconres.2013.05.004
   Web of Science ®Google Scholar