References
- ASTM C39/C39M-16b . (2016). Standard test method for compressive strength of cylindrical concrete specimens . West Conshohocken, PA: ASTM International. doi:10.1520/C0039_C0039M-16B
- ASTM D6276-99a e1 . (2006). Standard test method for using ph to estimate the soil-lime proportion requirement for soil stabilization (withdrawn 2015) . West Conshohocken, PA : ASTM International.
- Consoli, N. C. , da Silva Lopes, Jr., L. , & Heineck, K. S. (2009). Key parameters for the strength control of lime stabilized soils. Journal of Materials in Civil Engineering , 21 , 210–216.10.1061/(ASCE)0899-1561(2009)21:5(210)
- Consoli, N. C. , da Silva Lopes, L. , Foppa, D. , & Heineck, K. S. (2009). Key parameters dictating strength of lime/cement-treated soils. Proceedings of the Institution of Civil Engineers – Geotechnical Engineering , 162 , 111–118. doi:10.1680/geng.2009.162.2.111
- Consoli, N. C. , da Silva Lopes, Jr., L. , Dalla Rosa, A. , & Masuero, J. R. (2013). The strength of soil–industrial by-products–lime blends. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering , 166 , 431–440.10.1680/geng.10.00130
- Consoli, N. C. , da Rocha, C. G. , & Saldanha, R. B. (2014). Coal fly ash–carbide lime bricks: An environment friendly building product. Construction and Building Materials , 69 , 301–309.10.1016/j.conbuildmat.2014.07.067
- Consoli, N. C. , da Rocha, C. G. , & Silvani, C. (2014). Devising dosages for soil–fly ash–lime blends based on tensile strength controlling equations. Construction and Building Materials , 55 , 238–245.
- Consoli, N. C. , da Rocha, C. G. , & Maghous, S. (2016). Strategies for developing more sustainable dosages for soil-coal fly ash-lime blends. Journal of Materials in Civil Engineering , 28 , 04016130. doi:10.1061/(ASCE)MT.1943-5533.0001648
- Das, S. K. , Rout, S. K. , & Sahoo, T. (2013). Design of high embankment using red mud. A Review of Road and Road Transport Development Indian Highways , 41 , 27–34.
- Dass, A. , & Malhotra, S. (1990). Lime-stabilized red mud bricks. Materials and Structures , 23 , 252–255.10.1007/BF02472198
- Deelwal, K. , Dharavath, K. , & Kulshreshtha, M. (2014a). Evaluation of characteristic properties of red mud for possible use as a geotechnical material in civil construction. International Journal of Advances in Engineering & Technology , 7 , 1053–1059.
- Deelwal, K. , Dharavath, K. , & Kulshreshtha, M. (2014b). Stabilization of red mud by lime, gypsum and investigating its possible use as a geotechnical material in the civil construction. International Journal of Advances in Engineering & Technology , 7 , 1238–1244.
- Gore, M. S. (2015). Geotechnical characterization of bauxite residue (red mud) (Thesis, Doctor of Philosophy). the University of Texas, Austin, TX.
- Halász, J. , Hodos, M. , Hannus, I. , Tasi, G. , & Kiricsi, I. (2005). Catalytic detoxification of C2-chlorohydrocarbons over iron-containing oxide and zeolite catalysts. Colloids and Surfaces A: Physicochemical and Engineering Aspects , 265 , 171–177.10.1016/j.colsurfa.2005.03.030
- He, A. P. , Hu, Z. L. , Cao, D. G. , Zeng, J. M. , Wu, B. L. , & Wang, L. J. (2014). Extraction of valuable metals from red mud. Advanced Materials Research , 881 , 667–670.10.4028/www.scientific.net/AMR.881-883
- Khale, D. , & Chaudhary, R. (2007). Mechanism of geopolymerization and factors influencing its development: A review. Journal of Materials Science , 42 , 729–746.10.1007/s10853-006-0401-4
- Klauber, C. , Gräfe, M. , & Power, G. (2011). Bauxite residue issues: II. Options for residue utilization. Hydrometallurgy , 108 , 11–32.10.1016/j.hydromet.2011.02.007
- Kumar, S. , Tilak, V. B. , & Dutta, R. K. (2014). Microstructural development in bentonite modified with lime and phosphogypsum. IMTC , 2014 , 126–129.
- Kushwaha, S. , & Kishan, D. (2016). Stabilization of red mud by lime and gypsum and investigating its possible use in geoenvironmental engineering. Geo-Chicago , 2016 , 978–988.
- Liu, Z. , & Li, H. (2015). Metallurgical process for valuable elements recovery from red mud – A review. Hydrometallurgy , 155 , 29–43.10.1016/j.hydromet.2015.03.018
- Liu, X. & Zhang, N. (2011). Utilization of red mud in cement production: A review. Waste Management & Research , 29 , 1053–1063.10.1177/0734242X11407653
- Nguyen, Q. , & Boger, D. (1998). Application of rheology to solving tailings disposal problems. International Journal of Mineral Processing , 54 , 217–233.10.1016/S0301-7516(98)00011-8
- Ochsenkühn-Petropoulou, M. T. , Hatzilyberis, K. S. , Mendrinos, L. N. , & Salmas, C. E. (2002). Pilot-plant investigation of the leaching process for the recovery of scandium from red mud. Industrial & Engineering Chemistry Research , 41 , 5794–5801.10.1021/ie011047b
- Paramguru, R. K. , Rath, P. C. , & Misra, V. N. (2004). Trends in red mud utilization – A review. Mineral Processing and Extractive Metallurgy Review , 26 (1), 1–29. doi:10.1080/08827500490477603
- Sabat, A. K. , & Mohanta, S. (2015). Efficacy of dolime fine stabilized red mud-fly ash mixes as subgrade material. ARPN Journal of Engineering and Applied Sciences, 10, 5918–5923.
- Sabat, A. K. , & Mohanta, S. (2015). Strength and durability characteristics of stabilized red mud cushioned expansive soil. International Journal of Applied Engineering Research , 10 , 25867–25878.
- Satayanarayana, P. V. V. , Naidu, G. , Adiseshu, S. , & Rao, CH. V. H. (2012). Characterization of lime stabilized redmud mix for feasibility in road construction. International Journal of Engineering Research and Development , 3 , 20–26.
- Smirnov, D. , & Molchanova, T. (1997). The investigation of sulphuric acid sorption recovery of scandium and uranium from the red mud of alumina production. Hydrometallurgy , 45 , 249–259.10.1016/S0304-386X(96)00070-9
- Sushil, S. , & Batra, V. S. (2008). Catalytic applications of red mud, an aluminium industry waste: A review. Applied Catalysis B: Environmental , 81 , 64–77.10.1016/j.apcatb.2007.12.002
- Sutar, H. , Mishra, S. C. , Sahoo, S. K. , & Maharana, H. (2014). Progress of red mud utilization: An overview. American Chemical Science Journal , 4 , 255–279.10.9734/ACSJ
- Thakur, R. , & Sant, B. (1983a). Utilization of red mud: Pt. 2. Recovery of alkali, iron, aluminum, titanium and other constituents and the pollution problems. Journal of Scientific & Industrial Research , 42 , 456–469.
- Thakur, R. , & Sant, B. (1983b). Utilization of red mud: Pt. 1. Analysis and utilization as raw material for absorbents, building materials, catalysts, fillers, paints and pigments. Journal of Scientific and Industrial Research , 42 , 87–108.
- Vangelatos, I. , Angelopoulos, G. , & Boufounos, D. (2009). Utilization of ferroalumina as raw material in the production of ordinary Portland cement. Journal of Hazardous Materials , 168 , 473–478.
- Wang, P. , & Liu, D.-Y. (2012). Physical and chemical properties of sintering red mud and bayer red mud and the implications for beneficial utilization. Materials , 5 , 1800–1810.10.3390/ma5101800
- Xue, S. , Zhu, F. , Kong, X. , Wu, C. , Huang, L. , Huang, N. , & Hartley, W. (2016). A review of the characterization and revegetation of bauxite residues (Red mud). Environmental Science and Pollution Research , 23 , 1120–1132.10.1007/s11356-015-4558-8
- Yang, J. , & Xiao, B. (2008). Development of unsintered construction materials from red mud wastes produced in the sintering alumina process. Construction and Building Materials , 22 , 2299–2307.