Effects of inclusion stiffness on the cracking of cement-based composites under drying: a numerical study

References

• Aldea, C. M., Shah, S. P., & Karr, A. (1999). Effects of cracking on water and chloride permeability of concrete. ASCE Journal of Materials in Civil Engineering, 11, 181–187. doi:10.1061/(ASCE)0899-1561(1999)11:3(181).
   Web of Science ®Google Scholar
• Banzant, Z. P., Sener, S., & Kim, J. K. (1986). Effect of cracking on drying permeability and diffusivity of concrete. ACI Materials Journal, 84(5), 351–357. doi:10.14359/1739.
   Web of Science ®Google Scholar
• Bazant, Z. P., & Raftshol, W. J. (1982). Effect of cracking in drying and shrinkage specimens. Cement and Concrete Research, 12, 209–226. doi:10.1016/0008-8846(82)90008-4.
   Web of Science ®Google Scholar
• Bisschop, J., Pel, L., & van Mier, J. G. M. (2001). Effect of aggregate size and paste volume on drying shrinkage microcracking in cement-based composites. In F.-J. Ulm, Z. P. Bažant, J. Bisschop, & van Mier, J. G. M. (2002). How to study drying shrinkage microcracking in cement-based materials using optical and scanning electron microscopy. Cement and Concrete Research., 32, 279–287. doi: 10.1016/S0008-8846(01)00671-8
   Web of Science ®Google Scholar
• Bisschop, J., & van Mier, J. G. M. (2002). Effect of aggregates on drying shrinkage microcracking in cement-based composites. Materials and Structures, 35(8), 453–461.
   Google Scholar
• Buenfeld, N. R., Zobel, M., Zimmerman, R. W., & Wong, H. S. (2009). The influence of the interfacial transition zone and microcaracking on the diffusivity, permeability and sorptivity of cement-based materials after drying. Magazine of Concrete Research , 61, 571–589. doi:10.1680/macr.2008.61.8.571
   Web of Science ®Google Scholar
• Burlion, N., Bernard, D., & Chen, D. (2006). X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process. Cement and Concrete Research, 36, 346–357. doi:10.1016/j.cemconres.2005.04.008
   Web of Science ®Google Scholar
• Burlion, N., Bourgeois, F., & Shao, J. (2005). Effects of desiccation on mechanical behaviour of concrete. Cement and Concrete Research, 27, 367–379. doi: 10.1016/j.cemconcomp.2004.05.004
   Web of Science ®Google Scholar
• Carlier, J. P., Rougelot, T., & Burlion, N. (2012). Performance evaluation of models describing sorption isotherm in cementitious materials between saturation and oven dryness. Construction and Building Materials, 37, 58–66. doi:10.1016/j.conbuildmat.2012.07.032
   Web of Science ®Google Scholar
• Carlson, R. W. (1938). Drying shrinkage of concrete as affected by many factors. American Society for Testing and Materials Proceedings, 38, 419–437.
   Google Scholar
• Chiarelli, A. S., Shao, J. F., & Hoteit, N. (2003). Modeling of elastoplastic damage behaviour of a claystone. International Journal of Plasticity, 19, 23–45. doi:10.1016/S0749-6419(01)00017-1.
   Web of Science ®Google Scholar
• Coussy, O. (1995). Mechanics of Porous Continua. J. Chichester: Wiley.
   Google Scholar
• Coussy O., (2004). Poromechanics. Chichester: Wiley.
   Google Scholar
• Coussy, O., Dormieux, L., & Detournay, E. (1998). From mixture theory to Biot’s approach for porous media. The International Journal of Solids and Structures, 35, 4619–4635. doi:10.1016/S0020-7683(98)00087-0.
   Web of Science ®Google Scholar
• Elaqra, H., Godin, N., Peix, G., R’Mili, M., & Fantozzi, G. (2007). Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray micro-tomography: Effects of the sand/cement ratio. Cement and Concrete Research, 37, 703–713. doi:10.1016/j.cemconres.2007.02.008.
   Web of Science ®Google Scholar
• Gallucci, E., Scrivener, K., Groso, A., Stampanoni, M., & Margaritondo, G. (2007). 3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography. Cement and Concrete Research, 37, 360–368. doi:10.1016/j.cemconres.2006.10.012.
   Web of Science ®Google Scholar
• Idiart, A., Bisschop, J., Caballero, A., & Lura, P. (2012). A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites. Cement and Concrete Research, 42, 272–281. doi:10.1016/j.cemconres.2011.09.013.
   Web of Science ®Google Scholar
• Jamet, P., Millard, A., & Nahas G. (1984). Triaxial behavior of a micro-concrete complete stress-strain for confining pressures ranging from 0 to 100 MPa. Proceedings of International Conference on Concrete under Multiaxial Conditions. Presses de l’Université Paul Sabatier, Toulouse, 1, 133–140.
   Google Scholar
• Jia, Y., Bian, H. B., Su, K., Kondo, D., & Shao, J. F. (2010). Elastoplastic damage modeling of desaturation and resaturation in argillites. International Journal for Numerical and Analytical Methods in Geomechanics, 34, 187–220. doi:10.1002/nag.819
   Web of Science ®Google Scholar
• Kanna, V., Olson, R., & Jennings, H. (1998). Effect of shrinkage and moisture content on the physical characteristics of blended cement mortars. Cement and Concrete Research, 28, 1467–1477. doi:10.1016/S0008-8846(98)00120-3
   Web of Science ®Google Scholar
• Landis, E. N. & Nagy, E. N. (2000). Three-dimensional work of fracture for mortar in compression. Engineering Fracture Mechanics, 65, 223–234. doi:10.1016/S0013-7944(99)00124-1
   Web of Science ®Google Scholar
• Lu, S., Landis, E. N., & Keane, D. T. (2006). X-ray microtomographic studies of pore structure and permeability in Portland cement concrete. Materials and Structures, 39, 611–620. doi:10.1617/s11527-006-9099-7
   Web of Science ®Google Scholar
• Maruyama, I., Sasano, H., & Lin, M. (2016). Impact of aggregate properties on the development of shrinkage-induced cracking in concrete under restraint conditions. Cement and Concrete Research, 85, 82–101. doi:10.1016/j.cemconres.2016.04.004
   Web of Science ®Google Scholar
• Mazars, J. (1984). Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. Paris: Université Pierre Et Marie Curie-Paris 6.
   Google Scholar
• Pietruszczak, S., Jiang, J., & Mirza, F. A. (1988). An elastoplastic constitutive model for concrete. International Journal of Solids and Structures, 24, 705–722. doi:10.1016/0020-7683(88)90018-2
   Web of Science ®Google Scholar
• Rougelot, T. (2008). Etude expérimentale multi-échelles des couplages hydriques, mécaniques et chimiques dans les matériaux cimentaires. Lille: University of Lille 1.
   Google Scholar
• Rougelot, T., Burlion, N., Bernard, D., & Skoczylas, F. (2010). About microcracking due to leaching in cementitious composites: X-ray microtomograpgy description and numerical approach. Cement and Concrete Research, 40, 271–283. doi:10.1016/j.cemconres.2009.09.021
   Web of Science ®Google Scholar
• Rougelot, T., Skoczylas, F., & Burlion, N. (2009). Water desorption and shrinkage in mortars and cement pastes: experimental study and poromechanical model. Cement and Concrete Research, 39, 36–44. doi:10.1016/j.cemconres.2008.10.005
   Web of Science ®Google Scholar
• Sfer, D., Carol, I., Gettu, R., & Etse, G. (2002). Study of the behaviour of concrete under triaxial compression. Journal of Engineering Mechanics, 128, 156–163. doi:10.1061/(ASCE)0733-9399(2002)128:2(156)
   Web of Science ®Google Scholar
• Shao, J. F., Jia, Y., Kondo, D., & Chiarelli, A. S. (2006). A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions. Mechanics of Materials, 38, 218–232. doi:10.1016/j.mechmat.2005.07.002
   Web of Science ®Google Scholar
• Shiotani, T., Bisschop, J., & van Mier, J. G. M. (2003). Temporal and spatial development of drying shrinkage cracking in cement-based materials. Engineering Fracture Mechanics, 70, 1509–1525. doi:10.1016/S0013-7944(02)00150-9
   Web of Science ®Google Scholar
• Stock, S. R., Naik, N. K., Wilkinson, A. P., & Kurtis, K. E. (2002). X-ray microtomography (microCT) of the progression of sulphate attack of cement paste. Cement and Concrete Research, 32, 1673–1675. doi:10.1016/S0008-8846(02)00814-1
   Web of Science ®Google Scholar
• Szczesniak, M., Rougelot, T., Burlion, N., & Shao, J.-F. (2013). Compressive strength of cement-based composites: Roles of aggregate diameter and water saturation degree. Cement and Concrete Research, 37, 249–258. doi:10.1016/j.cemconcomp.2012.08.001
   Web of Science ®Google Scholar
• van Genuchten, M. T. H. (1980). A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Science Society of American Journal, 44, 892–898. https://www.ars.usda.gov/ARSUserFiles/20360500/pdf_pubs/P0682.pdf
   Web of Science ®Google Scholar
• Voyiadjis, G. Z., Taqieddin, Z. N., & Kattan, P. I. (2008). Anisotropic damage-plasticity model for concrete. International Journal of Plasticity, 24, 1946–1965. doi:10.1016/j.ijplas.2008.04.002
   Web of Science ®Google Scholar
• Yurtdas, I., Burlion, N., & Skoczylas, F. (2004). Triaxial mechanical behaviour of mortar: Effects of drying. Cement and Concrete Research, 34, 1131–1143. doi:10.1016/j.cemconres.2003.12.004
   Web of Science ®Google Scholar
• Zhou, H., Bian, H. B., Jia, Y., & Shao, J. F. (2013). Elastoplastic damage modeling the mechanical behavior of rock-like materials considering confining pressure dependency. Mechanics Research Communications, 53, 1–8. doi:10.1016/j.mechrescom.2013.07.008
   Web of Science ®Google Scholar