The development of a global mix design and analysis approach for alkali activated soil reinforcement grouts

References

• AFNOR (1992). FD P18-011: Concrete - Definition and classification of chemically aggressive environments - Recommendations for concrete mix design. (French Standard).
   Google Scholar
• Autef, A., Joussein, E., Poulesquen, A., Gasgnier, G., Pronier, S., Sobrados, I., … J., Rossignol, S. (2013). Influence of metakaolin purities on potassium geopolymer formulation: The existence of several networks. Journal of Colloid and Interface Science, 408(1), 43–53.
   PubMedGoogle Scholar
• Bouasker, M., Mounanga, P., Turcry, P., Loukili, A., & Khelidj, A. (2008). Chemical shrinkage of cement pastes and mortars at very early age: Effect of limestone filler and granular inclusions. Cement and Concrete Composites, 30(1), 13–22.
   Web of Science ®Google Scholar
• Byfors, K., Klingstedt, G., Lehtonen, V., Pyy, H., & Romben, L. (1989). Durability of concrete made with alkali-activated slag. In Third International Conference Proceedings. Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete (pp. 1429–1466). Trondheim, Norway: American Concrete Institute.
   Google Scholar
• Chen, W., & Brouwers, H. J. H. (2007). The hydration of slag, part 1: Reaction models for alkali-activated slag. Journal of Materials Science, 42(2), 428–443.
   Web of Science ®Google Scholar
• Cherki El Idrissi, A., Roziere, E., Loukili, A., & Darson, S. (2016). Design of geopolymer grouts: The effects of water content and mineral precursor. European Journal of Environmental and Civil Engineering, 22(5), 628–649.
   Web of Science ®Google Scholar
• Cherki El Idrissi, A., Paris, M., Roziere, E., Deneele, D., Darson S., & Loukili A. (2018). Alkali-activated grouts with incorporated fly ash: From NMR analysis to mechanical properties. Materials Today Communications, 14, 225–232.
   Web of Science ®Google Scholar
• Cortas, R., Rozière, E., Staquet, S., Hamami, A., Loukili, A., & Delplancke-Ogletree, M. P. (2014). Effect of the water saturation of aggregates on the shrinkage induced cracking risk of concrete at early age. Cement and Concrete Composites, 50, 1–9.
   Web of Science ®Google Scholar
• Davidovits, J. (1991). Geopolymers: Inorganic polymeric new materials. Journal of Thermal Analysis, 37, 1633–1656.
   Web of Science ®Google Scholar
• Diaz, E. I., Allouche, E. N., & Eklund, S. (2010). Factors affecting the suitability of fly ash as source material for geopolymers. Fuel, 89(5), 992–996.
   Web of Science ®Google Scholar
• Favier, A., Hot, J., Habert, G., Roussel, N., & d’Espinose de Lacaillerie, J.-B. (2014). Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes. Soft Matter, 10(8), 1134–1141.
   PubMed Web of Science ®Google Scholar
• Fernández-Jiménez, A., Puertas, F., & Arteaga, A. (1998). Determination of kinetic equations of alkaline activation of blast furnace slag by means of calorimetric data. Journal of Thermal Analysis, 52(3), 945–955.
   Web of Science ®Google Scholar
• Fernández-Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003). Structure of calcium silicate hydrates formed in alkaline-activated slag: Influence of the type of alkaline activator. Journal of the American Ceramic Society, 86(8), 1389–1394.
   Web of Science ®Google Scholar
• Glukhovskii, V. D., Pashkov, I. A., Starchevskaya, E. A., & Rostovskaya, G. S. (1967). Soil-silicate concrete for hydraulic and irrigation structures. Hydrotechnical Construction, 1(2), 120–124.
   Google Scholar
• Grondin, F. A. (2006). Modélisation multi-echelles du comportement thermo-hydro-mechanique des matériaux hétérogènes: Applications aux matériaux Cimentaires sous sollicitations sévères. Paris: Université Pierre & Marie Curie.
   Google Scholar
• Herschel, W. H., & Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Zeitschrift, 39(4), 291–300.
   Google Scholar
• Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2008). Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures. Journal of Materials Science, 43(3), 824–831.
   Web of Science ®Google Scholar
• Krüger, M., Bregar, R., David, G. A., & Juhart, J. (2016). Non-destructive evaluation of eco-friendly cementituous materials by ultrasound. In M. Azenha, I. Gabrijel, D. Schlicke, T. Kanstad, & O. M. Jensen (Eds.), Proceedings of the international RILEM conference: Materials, systems and structures in civil engineering (pp. 503–512). Lyngby, Denmark.
   Google Scholar
• Le Chatelier, H. (1887). Recherches expérimentales sur la constitution des mortiers hydauliques (Vol. Huitième S).
   Google Scholar
• Lenormand, T., Rozière, E., Loukili, A., & Staquet, S. (2015). Incorporation of treated municipal solid waste incineration electrostatic precipitator fly ash as partial replacement of Portland cement: Effect on early age behaviour and mechanical properties. Construction and Building Materials, 96, 256–269.
   Web of Science ®Google Scholar
• Massaad, G., Rozière, E., Loukili, A., & Izoret, L. (2016). Advanced testing and performance specifications for the cementitious materials under external sulfate attacks. Construction and Building Materials, 127, 918–931.
   Web of Science ®Google Scholar
• Mounanga, P., Khelidj, A., Loukili, A., & Baroghel-Bouny, V. (2004). Predicting Ca(OH)2 content and chemical shrinkage of hydrating cement pastes using analytical approach. Cement and Concrete Research, 34(2), 255–265.
   Web of Science ®Google Scholar
• Palacios, M., Houst, Y. F., Bowen, P., & Puertas, F. (2009). Adsorption of superplasticizer admixtures on alkali-activated slag pastes. Cement and Concrete Research, 39(8), 670–677.
   Web of Science ®Google Scholar
• Peak, D., & Corbett, J. W. (1972). Diffusion-controlled reaction kinetics. Physical Review B, 5(4), 1226–1238.
   Web of Science ®Google Scholar
• Provis, J. L., & van Deventer, J. S. J. (2007). Geopolymerisation kinetics. 2. Reaction kinetic modelling. Chemical Engineering Science, 62(9), 2318–2329.
   Web of Science ®Google Scholar
• Purdon, A. O. (1940). The action of alkalis on blast-furnace slag. Journal of the Society of Chemical Industry, 59, 191–202.
   Google Scholar
• Reinhardt, H. W., & Grosse, C. U. (2004). Continuous monitoring of setting and hardening of mortar and concrete. Construction and Building Materials, 18(3), 145–154.
   Web of Science ®Google Scholar
• Rozière, E., & Loukili, A. (2011). Performance-based assessment of concrete resistance to leaching. Cement and Concrete Composites, 33(4), 451–456.
   Web of Science ®Google Scholar
• Shi, C. (1996). Strength, pore structure and permeability of alkali-activated slag mortars. Cement and Concrete Research, 26(12), 1789–1799.
   Web of Science ®Google Scholar
• Shi, C., & Day, R. L. (1996). Some factors affecting early hydration of alkali slag cements. Cement and Concrete Research, 26(3), 439–447.
   Web of Science ®Google Scholar
• Wang, S. D., Scrivener, K. L., & Pratt, P. L. (1994). Factors affecting the strength of alkali-activated slag. Cement and Concrete Research, 24(6), 1033–1043.
   Web of Science ®Google Scholar
• Zhang, Z., Wang, H., Zhu, Y., Reid, A., Provis, J. L., & Bullen, F. (2014). Using fly ash to partially substitute metakaolin in geopolymer synthesis. Applied Clay Science, 88–89, 194–201.
   Web of Science ®Google Scholar