References
- AENOR EN 196-3. (2005). Methods of testing cement – Determination of setting and soundness.
- AENOR EN 197-1. (2000). Cement composition, specifications and conformity criteria for common cements. European Standard.
- Akindahunsi, A., & Uzoegbo, H.-C. (2015). Strength and durability properties of concrete with starch admixture. International Journal of Concrete Structures and Materials, 9(3), 323–335. doi: https://doi.org/10.1007/s40069-015-0103-x
- Al-Bahar, S.-K., Bogahawatta, T.-V., Al-Enezi, A.-K., Ali, S.-G., Kamal, H.-K., Al-Fadala, S.-B., … Al-Hazza, A.-S. (2014). Evaluation of Kuwaiti argillaceous materials as a replacement of sand for clinker production. Arabian Journal for Science and Engineering, 39(6), 4485–4506. doi: https://doi.org/10.1007/s13369-014-1035-5
- Aoual-Benslafa, F.-K., Kerdal, D., Mekerta, B., & Semcha, A. (2014). The use of dredged sediments as sand in the mortars for tunnel lining and for environmental protection. Arabian Journal for Science and Engineering, 39(4), 2483–2493. doi: https://doi.org/10.1007/s13369-013-0805-9
- Benlalla, A., El Moussaouiti, M., Dahhou, M., & Assafi, M. (2015). Utilization of water treatment plant sludge in structural ceramics bricks. Applied Clay Science, 118, 171–177. doi: https://doi.org/10.1016/j.clay.2015.09.012
- Bordy, A., Younsi, A., Aggoun, S., & Fiorio, B. (2017). Cement substitution by a recycled cement paste fine: Role of the residual anhydrous clinker. Construction and Building Materials, 132, 1–8. doi: https://doi.org/10.1016/j.conbuildmat.2016.11.080
- Bouharoun, S., Leklou, N., & Mounanga, P. (2015). Use of asbestos-free fiber-cement waste as a partial substitute of Portland cement in mortar. Materials and Structures, 48(6), 1679–1687. doi: https://doi.org/10.1617/s11527-014-0264-0
- Bouzidi, M.-A., Tahakourt, A., Bouzidi, N., & Merabet, D. (2014). Synthesis and characterization of belite cement with high hydraulic reactivity and low environmental impact. Arabian Journal for Science and Engineering, 39(12), 8659–8668. doi: https://doi.org/10.1007/s13369-014-1471-2
- Cai, X., He, Z., Tang, S., & Chen, X. (2016). Abrasion erosion characteristics of concrete made with moderate heat Portland cement, fly ash and silica fume using sandblasting test. Construction and Building Materials, 127, 804–814. doi: https://doi.org/10.1016/j.conbuildmat.2016.09.117
- Chen, H., Ma, X., & Dai, H. (2010). Reuse of water purification sludge as raw material in cement production. Cement and Concrete Composites, 32(6), 436–439. doi: https://doi.org/10.1016/j.cemconcomp.2010.02.009
- Chiou, I.-J., Chen, C.-H., & Li, Y.-H. (2014). Using oyster-shell foamed bricks to neutralize the acidity of recycled rainwater. Construction and Building Materials, 64, 480–487.
- Dahhou, M., Barbach, R., & El Moussaouiti, M. (2018). Alumina sludge’s Influence on the physicochemical characteristicsof CPJ55 cement. MATEC Web of Conferences, 149, 01058. doi: https://doi.org/10.1051/matecconf/201814901058
- Dahhou, M., Barbach, R., & El Moussaouiti, M. (2019). Synthesis and characterization of belite-rich cement by exploiting alumina sludge. KSCE Journal of Civil Engineering, 23(3), 1150–1158. doi: https://doi.org/10.1007/s12205-019-0178-z
- Dahhou, M., El Moussaouiti, M., Arshad, M.-A., Moustahsine, S., & Assafi, M. (2018). Synthesis and characterization of drinking water treatment plant sludge-incorporated Portland cement. Journal of Material Cycles and Waste Management, 20(2), 891–901. doi: https://doi.org/10.1007/s10163-017-0650-0
- Dahhou, M., El Moussaouiti, M., Benlalla, A., El Hamidi, A., Taibi, M., & Arshad, M.-A. (2016). Structural aspects and thermal degradation kinetics of water treatment plant sludge of Moroccan capital. Waste and Biomass Valorization, 7(5), 1177–1187. doi: https://doi.org/10.1007/s12649-016-9513-5
- Dahhou, M., El Moussaouiti, M., El Morhit, M., Gamouh, S., & Moustahsine, S. (2017). Drinking water sludge of the Moroccan capital: Statistical analysis of its environmental aspects. Journal of Taibah University for Science, 11(5), 749–758. doi: https://doi.org/10.1016/j.jtusci.2016.09.003
- Diliberto, C., Lecomte, A., Mechling, J.-M., Izoret, L., & Smith, A. (2017). Valorisation of recycled concrete sands in cement raw meal for cement production. Materials and Structures, 50, 127–138.
- Diop, M. B., Ndiaye, A. A., DNdiaye, S., Lo, B., Sakho, O., Tall, P. D., … Soboyejo, W. (2005). Evaluation of phosphogypsum as an alternative of gypsum in the fabrication of CEM II/A-M 32.5 R Portland cement. In Cement Combinations for Durable Concrete: Proceedings of the International Conference held at the University of Dundee, 31–44. Scotland, UK. doi: https://doi.org/10.1680/ccfdc.34013.0004
- Edalat-Behbahani, A., Soltanzadeh, F., Emam-Jomeh, M., & Soltan-Zadeh, Z. (2019). Sustainable approaches for developing concrete and mortar using waste seashell. European Journal of Environmental and Civil Engineering. doi: https://doi.org/10.1080/19648189.2019.1607780
- El-Alfi, E. A., & Gado, R. A. (2016). Preparation of calcium sulfoaluminate-belite cement from marble sludge waste. Construction and Building Materials, 113, 764–772. doi: https://doi.org/10.1016/j.conbuildmat.2016.03.103
- EN 196-1:2005 (E). (2005). Methods of testing cement (Part 1): Determination of strength. Chiswick, London, UK. British Standards Institute/The European Committee for Standardisation.
- EN 196-6. (1990). Method of testing cement. Part 6: Determination of fineness. Dublin, Ireland: NSAI standards/The European Committee for Standardisation.
- Eo, S. H., & Yi, S. T. (2015). Effect of oyster shell as an aggregate replacement on the characteristics of concrete. Magazine of Concrete Research, 67(15), 833–842. doi: https://doi.org/10.1680/macr.14.00383
- Gastaldini, A.-L.-G., Hengen, M.-F., Gastaldini, M.-C.-C., Do Amaral, F.-D., Antolini, M.-B., & Coletto, T. (2015). The use of water treatment plant sludge ash as a mineral addition. Construction and Building Materials, 94, 513–520. doi: https://doi.org/10.1016/j.conbuildmat.2015.07.038
- Gesoglu, M., Güneyisi, E., Nahhab, A.-H., & Yazıcı, H. (2016). The effect of aggregates with high gypsum content on the performance of ultra-high strength concretes and Portland cement mortars. Construction and Building Materials, 110, 346–354. doi: https://doi.org/10.1016/j.conbuildmat.2016.02.045
- Giusti, L. (2009). A review of waste management practices and their impact on human health. [Database] Waste Management, 29(8), 2227–2239.
- Gomes, S. D. C., Zhou, J. L., Li, W., & Long, G. (2019). Progress in manufacture and properties of construction materials incorporating water treatment sludge: A review. Resources, Conservation and Recycling, 145, 148–159. doi: https://doi.org/10.1016/j.resconrec.2019.02.032
- Hasanbeigi, A., Price, L., & Lin, E. (2012). Emerging energy-efficiency and CO2 emission reduction technologies for cement and concrete production: A technical review. Renewable and Sustainable Energy Reviews, 16(8), 6220–6238. doi: https://doi.org/10.1016/j.rser.2012.07.019
- Islam, K.-N., Ali, M.-E., Abu, Bakar, M.-Z.-B., Loqman, M.-Y., Islam, A., … Ullah, M. (2013). A novel catalytic method for the synthesis of spherical aragonite nanoparticles from cockle shells. Powder Technology, 246, 434–440. doi: https://doi.org/10.1016/j.powtec.2013.05.046
- Karaipekli, A., Sarı, A., & Biçer, A. (2016). Thermal regulating performance of gypsum/(C18–C24) composite phase change material (CPCM) for building energy storage applications. Applied Thermal Engineering, 107, 55–62. doi: https://doi.org/10.1016/j.applthermaleng.2016.06.160
- Kirgiz, M.-S. (2015). Use of ultrafine marble and brick particles as raw materials in cement manufacturing. Materials and Structures, 48(9), 2929–2941. doi: https://doi.org/10.1617/s11527-014-0368-6
- Kolovos, K., Tsivilis, S., & Kakali, G. (2005). SEM examination of clinkers containing foreign elements. Cement and Concrete Composites, 27(2), 163–170. doi: https://doi.org/10.1016/j.cemconcomp.2004.02.003
- Kontoleontos, F., Tsakiridis, P., Marinos, A., Katsiotis, N., Kaloidas, V., & Katsioti, M. (2013). Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization. Materials Research, 16(2), 404–416. doi: https://doi.org/10.1590/S1516-14392013005000014
- Kuo, W.-T., Wang, H.-Y., Shu, C.-Y., & Su, D.-S. (2013). Engineering properties of controlled low-strength materials containing waste oyster shells. Construction and Building Materials, 46, 128–133. doi: https://doi.org/10.1016/j.conbuildmat.2013.04.020
- Lanzón, M., Garrido, A., & García-Ruiz, P. A. (2011). Stabilization of sodium oleate as calcium oleate in cement-based mortars made with limestone fillers. Construction and Building Materials, 25(2), 1001–1008. doi: https://doi.org/10.1016/j.conbuildmat.2010.06.079
- Lee, C., Lee, S., & Nguyen, N. (2016). Modeling of compressive strength development of high-earlystrength-concrete at different curing temperatures. International Journal of Concrete Structures and Materials, 10(2), 205–219. doi: https://doi.org/10.1007/s40069-016-0147-6
- Li, G., Xu, X., Chen, E., Fan, J., & Xiong, G. (2015). Properties of cement-based bricks with oyster-shells ash. Journal of Cleaner Production, 91, 279–287.
- Li, H., Zhao, J., Huang, Y., Jiang, Z., Yang, X., Yang, Z., & Chen, Q. (2016). Investigation on the potential of waste cooking oil as a grinding aid in Portland cement. Journal of Environmental Management, 184, 545–551. doi: https://doi.org/10.1016/j.jenvman.2016.10.027
- Manso, J. M., Rodriguez, Á., Aragón, Á., & Gonzalez, J. J. (2011). The durability of masonry mortars made with ladle furnace slag. Construction and Building Materials, 25(8), 3508–3519. doi: https://doi.org/10.1016/j.conbuildmat.2011.03.044
- Mashaly, A. O., El-Kaliouby, B. A., Shalaby, B. N., E. L., Gohary, A.-M., & Rashwan, M.-A. (2016). Effects of marble sludge incorporation on the properties of cement composites and concrete paving blocks. Journal of Cleaner Production, 112, 731–741. doi: https://doi.org/10.1016/j.jclepro.2015.07.023
- Mo, K.-H., Alengaram, U.-G., Jumaat, M.-Z., Lee, S.-C., Goh, W.-I., & Yuen, C. W. (2018). Recycling of seashell waste in concrete: A review. Construction and Building Materials, 162, 751–764. doi: https://doi.org/10.1016/j.conbuildmat.2017.12.009
- Newman, P. (2006). The environmental impact of cities. Environment and Urbanization, 18(2), 275–295. doi: https://doi.org/10.1177/0956247806069599
- Ouyang, X., Ye, G., & Breugel, K.-V. (2017). Experimental and numerical evaluation of mechanical properties of interface between filler and hydration products. Construction and Building Materials, 135, 538–549. doi: https://doi.org/10.1016/j.conbuildmat.2017.01.022
- Pavlík, Z., Fořt, J., Záleská, M., Pavlíková, M., Trník, A., Medved, I., … Černý, R. (2016). Energy-efficient thermal treatment of sewage sludge for its application in blended cements. Journal of Cleaner Production, 112, 409–419. doi: https://doi.org/10.1016/j.jclepro.2015.09.072
- Salama, W., El Aref, M., & Gaupp, R. (2015). Spectroscopic characterization of iron ores formed in different geological environments using FTIR, XPS, Mössbauer spectroscopy and thermos analyses. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 136, 1816–1826. doi: https://doi.org/10.1016/j.saa.2014.10.090
- Salihoglu, G., Pinarli, V., Salihoglu, N. K., & Karaca, G. (2007). Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement. Journal of Environmental Management, 85(1), 190–197. doi: https://doi.org/10.1016/j.jenvman.2006.09.004
- Santos, R. L., Horta, R. B., Pereira, J., Nunes, T. G., Rocha, P., Canongia, L.,J.-N., & Colaço, R. (2015). Microstructural control and hydration of novel micro-dendritic clinkers with CaO/SiO2 = 1.4. Cement and Concrete Research, 76, 212–221.
- Schoon, J., De Buysser, K., Van Driessche, I., & De Belie, N. (2013). Feasibility study on the use of cellular concrete as alternative raw material for Portland clinker production. Construction and Building Materials, 48, 725–733. doi: https://doi.org/10.1016/j.conbuildmat.2013.07.083
- Shen, D., Huang, M., Feng, H., Li, N., Zhou, Y., & Long, Y. (2017). Effect of waste addition points on the chromium leachability of cement produced by co-processing of tannery sludge. Waste Management, 61, 345–353. doi: https://doi.org/10.1016/j.wasman.2017.01.039
- Shi, Z., Shi, C., Zhao, R., & Wan, S. (2015). Comparison of alkali–silica reactions in alkali-activated slag and Portland cement mortars. Materials and Structures, 48(3), 743–751. doi: https://doi.org/10.1617/s11527-015-0535-4
- Stutzman, P. (2004). Scanning electron microscopy imaging of hydraulic cement microstructure. Cement and Concrete Composites, 26(8), 957–966. doi: https://doi.org/10.1016/j.cemconcomp.2004.02.043
- Stutzman, P., Heckert, A., Tebbe, A., & Leighb, S. (2014). Uncertainty in Bogue-calculated phase composition of hydraulic cements. Cement and Concrete Research, 61–62, 40–48. doi: https://doi.org/10.1016/j.cemconres.2014.03.007
- Tsakiridis, P. E., Samouhos, M., Peppas, A., Katsiotis, N. S., Velissariou, D., Katsiotis, M. S., & Beazi, M. (2016). Silico-aluminous bottom ash valorisation in cement clinker production: Synthesis, characterization and hydration properties. Construction and Building Materials, 126, 673–681. doi: https://doi.org/10.1016/j.conbuildmat.2016.09.089
- Taylor, H.-F.-W. (1997). Cement chemistry (2nd ed.). London: Thomas Telford Publishing.
- Vilaplana, A.-S.-D.-G., Ferreira, V.-J., & López-Sabirón, A.-M. (2015). Utilization of Ladle Furnace slag from a steelwork for laboratory scale production of Portland cement. Construction and Building Materials, 94, 837–843. doi: https://doi.org/10.1016/j.conbuildmat.2015.07.075
- Wang, H.-Y., Kuo, W.-T., Lin, C.-C., & Chen, P.-Y. (2013). Study of the material properties of fly ash added to oyster cement mortar. Construction and Building Materials, 41, 532–537. doi: https://doi.org/10.1016/j.conbuildmat.2012.11.021
- Wang, F.-Z., Shang, D.-C., Wang, M.-G., Hu, S.-G., & Li, Y.-Q. (2016). Incorporation and substitution mechanism of cadmium in cement clinker. Journal of Cleaner Production, 112, 2292–2299.
- Wang, W.-J., Wang, C.-D., Lee, T., Ch., & Chang, C.-C. (2014). Characterization of a mortar made with cement and sludge from the light-emitting diode manufacturing process. Construction and Building Materials, 56, 106–112. doi: https://doi.org/10.1016/j.conbuildmat.2014.01.078
- Warakulwit, C., Yadnum, S., Paluka, V., Phuakkong, O., Niamlaem, M., Pongpaisanseree, K., … Limtrakul, J. (2015). Controlled production of carbon nanofibers over cement clinker via oxidative dehydrogenation of acetylene by intrinsic carbon dioxide. Chemical Engineering Journal, 278, 150–158. doi: https://doi.org/10.1016/j.cej.2014.11.028
- Wei, Y. L., Kuo, P. J., Yin, Y. Z., Huang, Y. T., Chung, T. H., & Xie, X. Q. (2018). Co-sintering oyster shell with hazardous steel fly ash and harbor sediment into construction materials. Construction and Building Materials, 172, 224–232. doi: https://doi.org/10.1016/j.conbuildmat.2018.03.242
- Xu, W., Xu, J., Liu, J., Li, H., Cao, B., Huang, X., & Li, G. (2014). The utilization of lime-dried sludge as resource for producing cement. Journal of Cleaner Production, 83, 286–293.
- Yang, Y., Tomlinson, D., Kennedy, S., & Zhao, Y.-Q. (2006). Dewatered alum sludge: A potential adsorbent for phosphorus removal. Water Science and Technology, 54(5), 207–213. doi: https://doi.org/10.2166/wst.2006.564
- Yang, Y., Zhao, Y. Q., Babatunde, A. O., Wang, L., Ren, Y.-X., & Han, Y. (2006). Characteristics and mechanisms of phosphate adsorption on dewatered alum sludge. Separation and Purification Technology, 51(2), 193–200. doi: https://doi.org/10.1016/j.seppur.2006.01.013
- Yano, J., & Shin-Ichi, S. (2016). Waste prevention indicators and their implications from a life cycle perspective: A review. Journal of Material Cycles and Waste Management, 18(1), 38–56. doi: https://doi.org/10.1007/s10163-015-0406-7
- Yao, Z., Xia, M., Li, H., Chen, T., Ye, Y., & Zheng, H. (2014). Bivalve shell: Not an abundant useless waste but a functional and versatile biomaterial. Critical Reviews in Environmental Science and Technology, 44(22), 2502–2530. doi: https://doi.org/10.1080/10643389.2013.829763