References
- Aldabsheh, I., Khoury, H., Wastiels, J., & Rahier, H. (2015). Dissolution behavior of Jordanian clay-rich materials in alkaline solutions for alkali activation purpose. Part I. Applied Clay Science, 115, 238–247. doi:https://doi.org/10.1016/j.clay.2015.08.004
- Avarez-Ayuso, E. E., Querol, X., Plana, F., Alastuey, A., Moreno, N., Izquierdo, M., … Barra, M. (2008). Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes. Journal of Hazardous Materials, 154, 175–183. doi:https://doi.org/10.1016/j.jhazmat.2007.10.008
- Bakharev, T. (2005). Resistance of geopolymer materials to acid attack. Cement and Concrete Research, 35(4), 658–670. doi:https://doi.org/10.1016/j.cemconres.2004.06.005
- Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000). Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: Sodium polysialate polymers. International Journal of Inorganic Materials, 2(4), 309–317. doi:https://doi.org/10.1016/S1466-6049(00)00041-6
- Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010). Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags. Cement and Concrete Research, 40(6), 898–907. doi:https://doi.org/10.1016/j.cemconres.2010.02.003
- Bernal, S. A., Provis, J. L., Mejía de Gutierrez, R., & Rose, V. (2011). Evolution of binder structure in sodium silicate-activated slag-metakaolin blends. Cement and Concrete Composites, 33(1), 46–54. doi:https://doi.org/10.1016/j.cemconcomp.2010.09.004
- Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011). Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends. Journal of Materials Science, 46(16), 5477–5486. doi:https://doi.org/10.1007/s10853-011-5490-z
- Boke, H., Cizer, O., Ipekoglu, B., Ugurlu, E., Serifaki, K., & Toprak, G. (2008). Characteristics of lime produced from limestone containing diatoms. Construction and Building Materials, 22, 866–874. doi:https://doi.org/10.1016/j.conbuildmat.2006.12.010
- Borges, P. H. R., Banthia, N., Alcamand, H. A., Vasconcelos, W. L., & Nunes, E. H. M. (2016). Performance of blended metakaolin/blast furnace slag alkali-activated mortars. Cement and Concrete Composites, 71, 42–52. doi:https://doi.org/10.1016/j.cemconcomp.2016.04.008
- Bosch Reig, F., Gimeno Adelantado, V., & Moya Moreno, M. C. (2002). FTIR quantative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples. Talanta, 58(4), 811–821. doi:https://doi.org/10.1016/S0039-9140(02)00372-7
- Boussen, S., Sghaier, D., Chaabani, F., Jamoussi, B., Messaoud, S. B., & Bennour, A. (2015). The rheological, mineralogical and chemical characteristic of the original and the Na2CO3-activated Tunisian swelling clay (Aleg Formation) and their utilization as drilling mud. Applied Clay Science, 118, 344–353. doi:https://doi.org/10.1016/j.clay.2015.10.017
- Buchwald, A., Hilbig, H., & Kaps, C. (2007). Alkali-activated metakaolin-slag blends – Performance and structure in dependence on their composition. Journal of Materials Science, 42(9), 3024–3032. doi:https://doi.org/10.1007/s10853-006-0525-6
- Buchwald, A., Hohmann, M., & Kaps, C. (2007). The suitability of different clay resources in respect to form geopolymeric binders. Paper presented at the Proceedings of International Conference on Alkali Activated Materials: Research, Production and Utilization, Prague, 137–148.
- Buchwald, A., Hohmann, M., Posern, K., & Brendler, E. (2009). The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders. Applied Clay Science, 46(3), 300–304. doi:https://doi.org/10.1016/j.clay.2009.08.026
- Buchwald, A., Tatarin, R., & Stephan, D. (2009). Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends. Journal of Materials Science, 44(20), 5609–5617. doi:https://doi.org/10.1007/s10853-009-3790-3
- Burciaga-Díaz, O., Escalante-García, J. I., Arellano-Aguilar, R., & Gorokhovsky, A. (2010). Statistical analysis of strength development as a function of various parameters on activated metakaolin/slag cements. Journal of the American Ceramic Society, 93(2), 541–547. doi:https://doi.org/10.1111/j.1551-2916.2009.03414.x
- Dietel, J., Warr, L. N., Bertmer, M., Steudel, A., Grathoff, G. H., & Emmerich, K. (2017). The importance of specific surface area in the geopolymerization of heated illitic clay. Applied Clay Science, 139, 99–107. doi:https://doi.org/10.1016/j.clay.2017.01.001
- Fernández-Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003). Structure of calcium silicate hydrates formed in alkaline-activated slag: Influence of the type of alkaline activator. Journal of the American Ceramic Society, 86(8), 1389–1394. doi:https://doi.org/10.1111/j.1151-2916.2003.tb03481.x
- Garcia-Lodeiro, I., Palomo, A., Fernandez-Jimenez, A., & Macphee, D. E. (2011). Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O. Cement and Concrete Research, 41(9), 923–931. doi:https://doi.org/10.1016/j.cemconres.2011.05.006
- Glid, M., Sobrados, I., Ben Rhaiem, H., Sanz, J., & Ben Haj Amara, A. (2017). Alkaline activation of metakaolinite-silica mixtures: Role of dissolved silica concentration on the formation of geopolymers. Ceramics International, 43(15), 12641–12650. doi:https://doi.org/10.1016/j.ceramint.2017.06.144
- González-García, D. M., Téllez-Jurado, L., Jiménez-Álvarez, F. J., & Balmori-Ramírez, H. (2017). Structural study of geopolymers obtained from alkali-activated natural pozzolan feldspars. Ceramics International, 43(2), 2606–2613. doi:https://doi.org/10.1016/j.ceramint.2016.11.070
- El Hafid, K., & Hajjaji, M. (2016). Alkali-etched heated clay: Microstructure and physical/mechanical properties. Journal of Asian Ceramic Society, 4(3), 234–242. doi:https://doi.org/10.1016/j.jascer.2016.07.001
- Lecomte, I., Liégeois, M., Rulmont, A., Cloots, R., & Maseri, F. (2003). Synthesis and characterization of new inorganic polymeric composites based on kaolin or white clay and on ground-granulated blast furnace slag. Journal of Materials Research, 18(11), 2571–2579. doi:https://doi.org/10.1557/JMR.2003.0360
- MacKenzie, K. J. D., Brew, D. R. M., Fletcher, R., & Vagana, R. (2007). Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods: A comparative study. Journal of Materials Science, 42(12), 4667–4674.
- Mehta, A., & Siddique, R. (2016). An overview of geopolymers derived from industrial by-products. Construction and Building Materials, 127, 183–198.
- Nenadovic, S. S., Kljajevic, L. M., Nesic, M. A., Petkovic, M. Z., Trivunac, K. V., & &Pavlovic, V. B. (2017). Structure analysis of geopolymers synthesized from clay originated from Serbia. Environmental Earth Science, 1, 76–79.
- Ng, S., & Justnes, H. (2015). Influence of dispersing agents on the rheology and early heat of hydration of blended cements with high loading of calcined marl. Cement and Concrete Composites, 60(7), 123–134.
- Pacheco-Torgal, F., Labrincha, J., Leonelli, C., Palomo, A., & Chindaprasit, P. (2014). Handbook of alkali-activated cements, mortars and concretes. UK: Elsevier.
- Perna, I., & Hanzlícek, T. (2016). The setting time of a clay-slag geopolymer matrix: The influence of blast-furnace-slag addition and the mixing method. Journal of Cleaner Production, 112, 1150–1155.
- Provis, J. L., Myers, R. J., White, C. E., Rose, V., & van Deventer, J. S. J. (2012). X-ray microtomography shows pore structure and tortuosity in alkali-activated binders. Cement and Concrete Research, 42(6), 855–864. doi:https://doi.org/10.1016/j.cemconres.2012.03.004
- Provis, J. L. & van Deventer, J. S. J. (2014). Alkali activated materials, state-of-the-art report, RILEM, TC 224-AAM. UK: Springer.
- Puertas, F., & Fernandez-Jimenez, A. (2003). Mineralogical and microstructural characterization of alkali-activated fly ash/slag pastes. Cement and Concrete Composites, 25(3), 287–292. doi:https://doi.org/10.1016/S0958-9465(02)00059-8
- Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011). A model for the C-A-S-H gel formed in alkali-activated slag cements. Journal of the European Ceramic Society, 31(12), 2043–2056. doi:https://doi.org/10.1016/j.jeurceramsoc.2011.04.036
- Rahier, H., Simons, W., VAN Mele, B., & Biesemans, M. (1997). Low temperature synthesized aluminosilicate glasses Part III. Influence of composition of the silica solution on production, structure and properties. Journal of Materials Science, 32(9), 2237–2247.
- Rakhimova, N. R. (2015). Properties and microstructural characteristics of alkali-activated slag-blended cements. Romanian Journal of Materials, 45(2), 105–116.
- Rakhimova, N. R., & Rakhimov, R. Z. (2014). A review on alkali-activated slag cements incorporated with supplementary materials. Journal of Sustainable Cement-Based Materials, 3(1), 61–74. doi:https://doi.org/10.1080/21650373.2013.876944
- Rakhimova, N. R., Rakhimov, R. Z., Naumkina, N. I., Khuzin, A. F., & Osin, Y. N. (2016). Influence of limestone content, fineness, and composition on the properties and microstructure of alkali-activated slag cement. Cement and Concrete Composites, 72, 268–274. doi:https://doi.org/10.1016/j.cemconcomp.2016.06.015
- Rakhimova, N. R., Rakhimov, R. Z., Osin, Y. N., Naumkina, N. I., Gubaidullina, A. M., Yakovlev, G. I., & Shaybadullina, A. V. (2015). Solidification of nitrate solutions with alkali-activated slag and slag–metakaolin cements. Journal of Nuclear Materials, 457, 186–195. doi:https://doi.org/10.1016/j.jnucmat.2014.11.068
- Rashad, A. M. (2013). A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil Engineer. Construction and Building Materials, 47, 29–55. doi:https://doi.org/10.1016/j.conbuildmat.2013.04.011
- Rashad, A. M. (2014). An exploratory study on alkali-activated slag blended with quartz powder under the effect of thermal cyclic loads and thermal shock cycles. Construction and Building Materials, 70(11), 165–174. doi:https://doi.org/10.1016/j.conbuildmat.2014.06.097
- Russel, J. D. (1976). Infrared spectroscopy of inorganic compounds, laboratory methods in infrared spectroscopy. New York, NY: Wiley.
- Samson, G., Cyr, M., & Gao, X. (2017). Thermomechanical performance of blended metakaolin-GGBFS alkali-activated foam concrete. Construction and Building Materials, 157, 982–993. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.146
- Saravanapavan, P., & Hench, L. (2003). Mesoporous calcium silicate glasses I. Synthesis. Journal of Non-Crystalline Solids, 318(1/2), 1–13. doi:https://doi.org/10.1016/S0022-3093(02)01864-1
- Sdiri, A., Higashi, T., Hatta, T., Jamoussi, F., & Tase, N. (2010). Mineralogical and spectroscopic characterization, and potential environmental use of limestone from the Abiod formation, Tunisia. Environmental Earth Sciences, 61(6), 1275–1287. doi:https://doi.org/10.1007/s12665-010-0450-5
- Shi, С., Fernández-Jiménez, а., & Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to Portland cement. Cement and Concrete Research, 41(7), 750–763. doi:https://doi.org/10.1016/j.cemconres.2011.03.016
- Stubican, V., & Roy, R. (1961). Infrared spectar of layer structure silicate. Journal of the American Ceramic Society, 44(12), 625–627. doi:https://doi.org/10.1111/j.1151-2916.1961.tb11670.x
- Tchadjié, L. N., Djobo, J. N. Y., Ranjbar, N., Tchakouté, H. K., Kenne, B. B. D., Elimbi, A., & Njopwouo, D. (2016). Potential of using granite waste as raw material for geopolymer synthesis. Ceramics International, 42(2), 3046–3055. doi:https://doi.org/10.1016/j.ceramint.2015.10.091
- Tyagi, B., Chudasama, C. D., & Jasra, R. V. (2006). Determination of structural modification in acid activated montmorillonite clay by FT-IR spectroscopy. Spectrochimica Acta A, 64A, 273–278. doi:https://doi.org/10.1016/j.saa.2005.07.018
- Van Der Marel, H. (1976). Atlas of infrared spectroscopy of clay minerals and their admixtures. Amsterdam: Elsevier.
- Van Deventer, J. S. J., Provis, J. L., & Duxson, Р. (2012). Technical and commercial progress in the adoption of geopolymer cement. Minerals Engineering, 29, 89–104. doi:https://doi.org/10.1016/j.mineng.2011.09.009
- Xu, H., & van Deventer, J. S. J. (2000). The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing, 59(3), 247–266. doi:https://doi.org/10.1016/S0301-7516(99)00074-5
- Xu, H., & van Deventer, J. S. J. (2002). Factors affecting the geopolymerization of alkali-feldspars. Minerals and Metallurgical Processing, 19(4), 209–214. doi:https://doi.org/10.1007/BF03403271
- Yi, Y., Gu, L., & Liu, S. (2015). Microstructural and mechanical properties of marine soft clay stabilized by lime-activated ground granulated blast furnace slag. Applied Clay Science, 103, 71–76. doi:https://doi.org/10.1016/j.clay.2014.11.005
- Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005). The coexistence of geopolymeric gel and calcium silicate hydrate of alkaline activation. Cement and Concrete Research, 35(9), 1688–1697. doi:https://doi.org/10.1016/j.cemconres.2004.10.042
- Zhang, Y., Sun, W., Chen, Q., & Chen, L. (2007). Synthesis and heavy metal immobilization behaviors of slag based geopolymer. Journal of Hazardous Materials, 143(1/2), 206–213.