References
- Aber, S., Amani-Ghadim, A., & Mirzajani, V. (2009). Removal of Cr (VI) from polluted solutions by electrocoagulation: Modeling of experimental results using artificial neural network. Journal of Hazardous Materials, 171(1-3), 484–490. doi:https://doi.org/10.1016/j.jhazmat.2009.06.025
- Aghababaei, M., Etemad-Shahidi, A., Jabbari, E., & Taghipour, M. (2017). Estimation of transverse mixing coefficient in straight and meandering streams. Water Resources Management, 31(12), 3809–3827. doi:https://doi.org/10.1007/s11269-017-1708-4
- Akyol, A. (2012). Treatment of paint manufacturing wastewater by electrocoagulation. Desalination, 285, 91–99. doi:https://doi.org/10.1016/j.desal.2011.09.039
- Al Aji, B., Yavuz, Y., & Koparal, A. S. (2012). Electrocoagulation of heavy metals containing model wastewater using monopolar iron electrodes. Separation and Purification Technology, 86, 248–254. doi:https://doi.org/10.1016/j.seppur.2011.11.011
- Al-Shannag, M., Al-Qodah, Z., Bani-Melhem, K., Qtaishat, M. R., & Alkasrawi, M. (2015). Heavy metal ions removal from metal plating wastewater using electrocoagulation: Kinetic study and process performance. Chemical Engineering Journal, 260, 749–756. doi:https://doi.org/10.1016/j.cej.2014.09.035
- Awwa, A. W. (1998). Standard methods for the examination of water and wastewater. Washington, DC: American Public Health Association.
- Babel, S., & Kurniawan, T. A. (2003). Low-cost adsorbents for heavy metals uptake from contaminated water: A review. Journal of Hazardous Materials, 97(1-3), 219–243. doi:https://doi.org/10.1016/S0304-3894(02)00263-7
- Bayramoglu, M., Kobya, M., Can, O. T., & Sozbir, M. (2004). Operating cost analysis of electrocoagulation of textile dye wastewater. Separation and Purification Technology, 37(2), 117–125. doi:https://doi.org/10.1016/j.seppur.2003.09.002
- Behbahani, M., Moghaddam, M. A., & Arami, M. (2011). Techno-economical evaluation of fluoride removal by electrocoagulation process: Optimization through response surface methodology. Desalination, 271(1-3), 209–218. doi:https://doi.org/10.1016/j.desal.2010.12.033
- Bhagawan, D., Poodari, S., Pothuraju, T., Srinivasulu, D., Shankaraiah, G., Yamuna Rani, M., … Vidyavathi, S. (2014). Effect of operational parameters on heavy metal removal by electrocoagulation. Environmental Science and Pollution Research, 21(24), 14166–14173. doi:https://doi.org/10.1007/s11356-014-3331-8
- Can, O., Bayramoglu, M., & Kobya, M. (2003). Decolorization of reactive dye solutions by electrocoagulation using aluminum electrodes. Industrial & Engineering Chemistry Research, 42(14), 3391–3396. doi:https://doi.org/10.1021/ie020951g
- Chen, G. (2004). Electrochemical technologies in wastewater treatment. Separation and Purification Technology, 38(1), 11–41. doi:https://doi.org/10.1016/j.seppur.2003.10.006
- Chen, Q., Luo, Z., Hills, C., Xue, G., & Tyrer, M. (2009). Precipitation of heavy metals from wastewater using simulated flue gas: Sequent additions of fly ash, lime and carbon dioxide. Water Research, 43(10), 2605–2614. doi:https://doi.org/10.1016/j.watres.2009.03.007
- Daneshvar, N., Sorkhabi, H. A., & Kasiri, M. (2004). Decolorization of dye solution containing Acid Red 14 by electrocoagulation with a comparative investigation of different electrode connections. Journal of Hazardous Materials, 112(1-2), 55–62. doi:https://doi.org/10.1016/j.jhazmat.2004.03.021
- El-Naas, M. H., Al-Zuhair, S., Al-Lobaney, A., & Makhlouf, S. (2009). Assessment of electrocoagulation for the treatment of petroleum refinery wastewater. Journal of Environmental Management, 91(1), 180–185. doi:https://doi.org/10.1016/j.jenvman.2009.08.003
- Eslami, A., Asadi, A., Meserghani, M., & Bahrami, H. (2016). Optimization of sonochemical degradation of amoxicillin by sulfate radicals in aqueous solution using response surface methodology (RSM). Journal of Molecular Liquids, 222, 739–744. doi:https://doi.org/10.1016/j.molliq.2016.07.096
- Ghosh, D., Solanki, H., & Purkait, M. (2008). Removal of Fe (II) from tap water by electrocoagulation technique. Journal of Hazardous Materials, 155(1-2), 135–143. doi:https://doi.org/10.1016/j.jhazmat.2007.11.042
- Golder, A., Samanta, A., & Ray, S. (2006). Removal of phosphate from aqueous solutions using calcined metal hydroxides sludge waste generated from electrocoagulation. Separation and Purification Technology, 52(1), 102–109. doi:https://doi.org/10.1016/j.seppur.2006.03.027
- Golder, A., Samanta, A., & Ray, S. (2007). Removal of Cr 3+ by electrocoagulation with multiple electrodes: Bipolar and monopolar configurations. Journal of Hazardous Materials, 141(3), 653–661. doi:https://doi.org/10.1016/j.jhazmat.2006.07.025
- Hanay, Ö., & Hasar, H. (2011). Effect of anions on removing Cu 2+, Mn 2+ and Zn 2+ in electrocoagulation process using aluminum electrodes. Journal of Hazardous Materials, 189(1-2), 572–576. doi:https://doi.org/10.1016/j.jhazmat.2011.02.073
- Hayes, R. B. (1997). The carcinogenicity of metals in humans. Cancer Causes Control, 8(3), 371–385.
- Heidmann, I., & Calmano, W. (2010). Removal of Ni, Cu and Cr from a galvanic wastewater in an electrocoagulation system with Fe-and Al-electrodes. Separation and Purification Technology, 71(3), 308–314. doi:https://doi.org/10.1016/j.seppur.2009.12.016
- Holt, P. K., Barton, G. W., Wark, M., & Mitchell, C. A. (2002). A quantitative comparison between chemical dosing and electrocoagulation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 211(2-3), 233–248. doi:https://doi.org/10.1016/S0927-7757(02)00285-6
- İrdemez, Ş., Yildiz, Y. Ş., & Tosunoğlu, V. (2006). Optimization of phosphate removal from wastewater by electrocoagulation with aluminum plate electrodes. Separation and Purification Technology, 52(2), 394–401. doi:https://doi.org/10.1016/j.seppur.2006.05.020
- Kalnicky, D. J., & Singhvi, R. (2001). Field portable XRF analysis of environmental samples. Journal of Hazardous Materials, 83(1-2), 93–122.
- Katsou, E., Malamis, S., & Haralambous, K. J. (2011). Industrial wastewater pre-treatment for heavy metal reduction by employing a sorbent-assisted ultrafiltration system. Chemosphere, 82(4), 557–564. doi:https://doi.org/10.1016/j.chemosphere.2010.10.022
- Khataee, A., & Dehghan, G. (2011). Optimization of biological treatment of a dye solution by macroalgae Cladophora sp. using response surface methodology. Journal of the Taiwan Institute of Chemical Engineers, 42(1), 26–33. doi:https://doi.org/10.1016/j.jtice.2010.03.007
- Khataee, A. R., Zarei, M., & Moradkhannejhad, L. (2010). Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode. Desalination, 258(1-3), 112–119. doi:https://doi.org/10.1016/j.desal.2010.03.028
- Kobya, M., Demirbas, E., Ozyonar, F., Sirtbas, G., & Gengec, E. (2017). Treatments of alkaline non-cyanide, alkaline cyanide and acidic zinc electroplating wastewaters by electrocoagulation. Process Safety and Environmental Protection, 105, 373–385. doi:https://doi.org/10.1016/j.psep.2016.11.020
- Kobya, M., Demirbas, E., Parlak, N., & Yigit, S. (2010). Treatment of cadmium and nickel electroplating rinse water by electrocoagulation. Environmental Technology, 31(13), 1471–1481. doi:https://doi.org/10.1080/09593331003713693
- Kobya, M., Demirbas, E., & Ulu, F. (2016). Evaluation of operating parameters with respect to charge loading on the removal efficiency of arsenic from potable water by electrocoagulation. Journal of Environmental Chemical Engineering, 4(2), 1484–1494. doi:https://doi.org/10.1016/j.jece.2016.02.016
- Kobya, M., Ulu, F., Gebologlu, U., Demirbas, E., & Oncel, M. S. (2011). Treatment of potable water containing low concentration of arsenic with electrocoagulation: Different connection modes and Fe–Al electrodes. Separation and Purification Technology, 77(3), 283–293. doi:https://doi.org/10.1016/j.seppur.2010.12.018
- Koparal, A. S., & Öğütveren, Ü. B. (2002). Removal of nitrate from water by electroreduction and electrocoagulation. Journal of Hazardous Materials, 89(1), 83–94.
- Kumar, P. R., Chaudhari, S., Khilar, K. C., & Mahajan, S. (2004). Removal of arsenic from water by electrocoagulation. Chemosphere, 55(9), 1245–1252. doi:https://doi.org/10.1016/j.chemosphere.2003.12.025
- Kumar, R., & Pal, P. (2012). Response surface-optimized Fenton’s pre-treatment for chemical precipitation of struvite and recycling of water through downstream nanofiltration. Chemical Engineering Journal, 210, 33–44. doi:https://doi.org/10.1016/j.cej.2012.08.036
- Mansoorian, H. J., Mahvi, A. H., & Jafari, A. J. (2014). Removal of lead and zinc from battery industry wastewater using electrocoagulation process: Influence of direct and alternating current by using iron and stainless steel rod electrodes. Separation and Purification Technology, 135, 165–175. doi:https://doi.org/10.1016/j.seppur.2014.08.012
- Martínez-Huitle, C. A., & Brillas, E. (2009). Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods: A general review. Applied Catalysis B: Environmental, 87(3-4), 105–145. doi:https://doi.org/10.1016/j.apcatb.2008.09.017
- Merzouk, B., Gourich, B., Sekki, A., Madani, K., & Chibane, M. (2009). Removal turbidity and separation of heavy metals using electrocoagulation–electroflotation technique: A case study. Journal of Hazardous Materials, 164(1), 215–222. doi:https://doi.org/10.1016/j.jhazmat.2008.07.144
- Merzouk, B., Gourich, B., Sekki, A., Madani, K., Vial, C., & Barkaoui, M. (2009). Studies on the decolorization of textile dye wastewater by continuous electrocoagulation process. Chemical Engineering Journal, 149(1-3), 207–214. doi:https://doi.org/10.1016/j.cej.2008.10.018
- Modirshahla, N., Behnajady, M., & Kooshaiian, S. (2007). Investigation of the effect of different electrode connections on the removal efficiency of Tartrazine from aqueous solutions by electrocoagulation. Dyes and Pigments, 74(2), 249–257. doi:https://doi.org/10.1016/j.dyepig.2006.02.006
- Modirshahla, N., Behnajady, M., & Mohammadi-Aghdam, S. (2008). Investigation of the effect of different electrodes and their connections on the removal efficiency of 4-nitrophenol from aqueous solution by electrocoagulation. Journal of Hazardous Materials, 154(1-3), 778–786. doi:https://doi.org/10.1016/j.jhazmat.2007.10.120
- Mollah, M. Y., Morkovsky, P., Gomes, J. A., Kesmez, M., Parga, J., & Cocke, D. L. (2004). Fundamentals, present and future perspectives of electrocoagulation. Journal of Hazardous Materials, 114(1-3), 199–210. doi:https://doi.org/10.1016/j.jhazmat.2004.08.009
- Mollah, M. Y. A., Schennach, R., Parga, J. R., & Cocke, D. L. (2001). Electrocoagulation (EC)-science and applications. Journal of Hazardous Materials, 84(1), 29–41.
- Murugananthan, M., Raju, G. B., & Prabhakar, S. (2004). Removal of sulfide, sulfate and sulfite ions by electro coagulation. Journal of Hazardous Materials, 109(1-3), 37–44. doi:https://doi.org/10.1016/j.jhazmat.2003.12.009
- Nanseu-Njiki, C. P., Tchamango, S. R., Ngom, P. C., Darchen, A., & Ngameni, E. (2009). Mercury (II) removal from water by electrocoagulation using aluminium and iron electrodes. Journal of Hazardous Materials, 168(2-3), 1430–1436. doi:https://doi.org/10.1016/j.jhazmat.2009.03.042
- Oden, M. K., & Sari-Erkan, H. (2018). Treatment of metal plating wastewater using iron electrode by electrocoagulation process: Optimization and process performance. Process Safety and Environmental Protection, 119, 207.
- Ozyonar, F. (2016). Treatment of train industry oily wastewater by electrocoagulation with hybrid electrode pairs and different electrode connection modes. International Journal of Electrochemical Science, 11(2), 1456–1471.
- Ozyonar, F., Muratcobanoglu, H., & Gokkus, O. (2017). Taguchi approach for color removal using electrocoagulation with different electrode connection types. Fresenius Environmental Bulletin, 26(12), 7600–7607.
- Pekey, H., Karakaş, D., & Bakoğlu, M. (2004). Source apportionment of trace metals in surface waters of a polluted stream using multivariate statistical analyses. Marine Pollution Bulletin, 49(9-10), 809–818. doi:https://doi.org/10.1016/j.marpolbul.2004.06.029
- Saberi, N., Aghababaei, M., Ostovar, M., & Mehrnahad, H. (2018). Simultaneous removal of polycyclic aromatic hydrocarbon and heavy metals from an artificial clayey soil by enhanced electrokinetic method. Journal of Environmental Management, 217, 897–905. doi:https://doi.org/10.1016/j.jenvman.2018.03.125
- Salarian, A.-A., Hami, Z., Mirzaei, N., Mohseni, S. M., Asadi, A., Bahrami, H., … Zare, M.-R. (2016). N-doped TiO2 nanosheets for photocatalytic degradation and mineralization of diazinon under simulated solar irradiation: Optimization and modeling using a response surface methodology. Journal of Molecular Liquids, 220, 183–191. doi:https://doi.org/10.1016/j.molliq.2016.04.060
- Santos, S. C., & Boaventura, R. A. (2008). Adsorption modelling of textile dyes by sepiolite. Applied Clay Science, 42(1-2), 137–145.
- Shafaei, A., Pajootan, E., Nikazar, M., & Arami, M. (2011). Removal of Co(II) from aqueous solution by electrocoagulation process using aluminum electrodes. Desalination, 279(1-3), 121–126. doi:https://doi.org/10.1016/j.desal.2011.05.070
- Sheydaei, M., Aber, S., & Khataee, A. (2014). Degradation of amoxicillin in aqueous solution using nanolepidocrocite chips/H 2 O 2/UV: Optimization and kinetics studies. Journal of Industrial and Engineering Chemistry, 20(4), 1772–1778. doi:https://doi.org/10.1016/j.jiec.2013.08.031
- Shojaeipoor, F., Elhamifar, D., Moshkelgosha, R., & Masoumia, B. (2016). Removal of Pb (II) and Co (II) ions from aqueous solution and industrial wastewater using ILNO-NH 2: Kinetic, isotherm and thermodynamic studies. Journal of the Taiwan Institute of Chemical Engineers, 67, 166–173. doi:https://doi.org/10.1016/j.jtice.2016.07.008
- Song, P., Yang, Z., Zeng, G., Yang, X., Xu, H., Wang, L., … Ahmad, K. (2017). Electrocoagulation treatment of arsenic in wastewaters: A comprehensive review. Chemical Engineering Journal, 317, 707–725. doi:https://doi.org/10.1016/j.cej.2017.02.086
- Uğurlu, M., Gürses, A., Doğar, Ç., & Yalçın, M. (2008). The removal of lignin and phenol from paper mill effluents by electrocoagulation. Journal of Environmental Management, 87(3), 420–428. doi:https://doi.org/10.1016/j.jenvman.2007.01.007
- Vasudevan, S., Lakshmi, J., & Sozhan, G. (2011). Studies on the Al–Zn–In-alloy as anode material for the removal of chromium from drinking water in electrocoagulation process. Desalination, 275(1-3), 260–268. doi:https://doi.org/10.1016/j.desal.2011.03.011
- Verma, A. K. (2017). Treatment of textile wastewaters by electrocoagulation employing Fe-Al composite electrode. Journal of Water Process Engineering, 20, 168–172. doi:https://doi.org/10.1016/j.jwpe.2017.11.001
- Verma, S. K., Khandegar, V., & Saroha, A. K. (2013). Removal of chromium from electroplating industry effluent using electrocoagulation. Journal of Hazardous, Toxic, and Radioactive Waste, 17(2), 146–152. doi:https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000170
- Vik, E. A., Carlson, D. A., Eikum, A. S., & Gjessing, E. T. (1984). Electrocoagulation of potable water. Water Research, 18(11), 1355–1360. doi:https://doi.org/10.1016/0043-1354(84)90003-4
- Xu, L., Xu, X., Cao, G., Liu, S., Duan, Z., Song, S., … Zhang, M. (2018). Optimization and assessment of Fe–electrocoagulation for the removal of potentially toxic metals from real smelting wastewater. Journal of Environmental Management, 218, 129–138. doi:https://doi.org/10.1016/j.jenvman.2018.04.049
- Yildiz, Y. Ş. (2008). Optimization of Bomaplex Red CR-L dye removal from aqueous solution by electrocoagulation using aluminum electrodes. Journal of Hazardous Materials, 153(1-2), 194–200. doi:https://doi.org/10.1016/j.jhazmat.2007.08.034
- Yıldız, Y., Koparal, A., & Keskinler, B. (2008). Effect of initial pH and supporting electrolyte on the treatment of water containing high concentration of humic substances by electrocoagulation. Chemical Engineering Journal, 138(1-3), 63–72. doi:https://doi.org/10.1016/j.cej.2007.05.029
- Zhao, J., Liu, J., Li, N., Wang, W., Nan, J., Zhao, Z., & Cui, F. (2016). Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3 O4-MnO2: Adsorption behavior and process study. Chemical Engineering Journal, 304, 737–746. doi:https://doi.org/10.1016/j.cej.2016.07.003