References
- Ahmad, S., Zubair, A., & Maslehuddin, M. (2015). Effect of key mixture parameters on flow and mechanical properties of reactive powder concrete. Construction and Building Materials, 99, 73–81. doi:https://doi.org/10.1016/j.conbuildmat.2015.09.010
- ASTM C1437-13. (2013). Standard test method for flow of hydraulic cement mortar. ASTM International, Pennsylvania. doi:https://doi.org/10.1520/C1437
- ASTM C1698-09. (2014). Standard test method for autogenous strain of cement paste and mortar. ASTM International, Pennsylvania. doi:https://doi.org/10.1520/C1698-09R14
- ASTM C349-14. (2014). Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). ASTM International, Pennsylvania. doi:https://doi.org/10.1520/C0349-14
- ASTM C618-12a. (2012). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, Pennsylvania. doi:https://doi.org/10.1520/C0618-12A
- ASTM C989/C989M-14. (2014). Standard specification for slag cement for use in concrete and mortars. ASTM International, Pennsylvania. doi:https://doi.org/10.1520/C0989_C0989M-14
- Beglarigale, A., Yalçınkaya, Ç., & Yazıcı, H. (2014). Autoclaved reactive powder concrete: The effects of steel micro-fibers and silica fume dosage on the mechanical properties. Usak University Journal of Material Sciences, 3(1), 7–7. doi:https://doi.org/10.12748/uujms.201416495
- Bentz, D. P., Peltz, M. A., & Winpigler, J. (2009). Early-age properties of cement-based materials. II: Influence of water-to-cement ratio. Journal of Materials in Civil Engineering, 21(9), 512–517. doi:https://doi.org/10.1061/(ASCE)0899-1561(2009)21:9(512)
- Berry, E. E., Hemmings, R. T., & Cornelius, B. J. (1990). Mechanisms of hydration reactions in high volume fly ash pastes and mortars. Cement and Concrete Composites, 12(4), 253–261. doi:https://doi.org/10.1016/0958-9465(90)90004-H
- Bjøntegård, Ø., & Sellevold, E. J. (2001). Interaction between thermal dilation and autogenous deformation in high performance concrete. Materials and Structures, 34(239), 266–272. doi:https://doi.org/10.1617/13731
- Briffaut, M., Benboudjema, F., & D’aloia, L. (2016). Effect of fibres on early age cracking of concrete tunnel lining. Part I: Laboratory ring test. Tunnelling and Underground Space Technology, 59, 215–220. doi:https://doi.org/10.1016/j.tust.2016.07.016
- Brühwiler, E., & Denarié, E. (2008). Rehabilitation of concrete structures using ultra- high performance fibre reinforced concrete. Paper presented at the Proceedings of the Second International Symposium on Ultra High Performance Concrete (pp. 895–902). Kassel, Germany.
- Chindaprasirt, P., Homwuttiwong, S., & Sirivivatnanon, V. (2004). Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar. Cement and Concrete Research, 34(7), 1087–1092. doi:https://doi.org/10.1016/j.cemconres.2003.11.021
- Fehling, E., & Thiemicke, J. (2012). Experimental investigations on I-shaped UHPC-beams with combined reinforcement under shear load. Paper presented at the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials (pp. 477–484). Kassel, Germany.
- Graybeal, B. (2010). Field-cast UHPC connections for modular bridge deck elements (No. FHWA-HRT-11-022). Federal Highway Administration: Virginia, United States of America.
- Holt, E. (2005). Contribution of mixture design to chemical and autogenous shrinkage of concrete at early ages. Cement and Concrete Research, 35(3), 464–472. doi:https://doi.org/10.1016/j.cemconres.2004.05.009
- Kanda, T., Momose, H., & Imamoto, K. (2015). Shrinkage cracking resistance of blast furnace slag blended cement concrete - Influencing factors and enhancing measures. Journal of Advanced Concrete Technology, 13(1), 1–14. doi:https://doi.org/10.3151/jact.13.1
- Lee, K. M., Lee, H. K., Lee, S. H., & Kim, G. Y. (2006). Autogenous shrinkage of concrete containing granulated blast-furnace slag. Cement and Concrete Research, 36(7), 1279–1285. doi:https://doi.org/10.1016/j.cemconres.2006.01.005
- Lura, P., Van Breugel, K., & Maruyama, I. (2001). Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete. Cement and Concrete Research, 31(12), 1867–1872. doi:https://doi.org/10.1016/S0008-8846(01)00601-9
- Mihashi, H., & Leite, J. P. D. B. (2004). State-of-the-art report on control of cracking in early age concrete. Journal of Advanced Concrete Technology, 2(2), 141–154. doi:https://doi.org/10.3151/jact.2.141
- Mo, K. H., Alengaram, U. J., Jumaat, M. Z., Liu, M. Y. J., & Lim, J. (2016). Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand. Journal of Cleaner Production, 112, 763–770. doi:https://doi.org/10.1016/j.jclepro.2015.06.122
- Mohr, B. J., & Hood, K. L. (2010). Influence of bleed water reabsorption on cement paste autogenous deformation. Cement and Concrete Research, 40(2), 220–225. doi:https://doi.org/10.1016/j.cemconres.2009.10.014
- Mostofinejad, D., Nikoo, M. R., & Hosseini, S. A. (2016). Determination of optimized mix design and curing conditions of reactive powder concrete (RPC). Construction and Building Materials, 123, 754–767. doi:https://doi.org/10.1016/j.conbuildmat.2016.07.082
- Mounanga, P., Khelidj, A., Loukili, A., & Baroghel-Bouny, V. (2004). Predicting Ca(OH)2 content and chemical shrinkage of hydrating cement pastes using analytical approach. Cement and Concrete Research, 34(2), 255–265. doi:https://doi.org/10.1016/j.cemconres.2003.07.006
- Nawa, T., & Horita, T. (2004). Autogenous shrinkage of high-performance concrete. Paper presented at the International Workshop on Microstructure and Durability to Predict Service Life of Concrete Structures (pp. 1–10), Sapporo, Japan.
- Noushini, A., Vessalas, K., Arabian, G., & Samali, B. (2014). Drying shrinkage behaviour of fibre reinforced concrete incorporating polyvinyl alcohol fibres and fly ash. Advances in Civil Engineering, 2014, 1. doi:https://doi.org/10.1155/2014/836173
- Sant, G., Lura, P., & Weiss, J. (2006). A discussion of analysis approaches for determining ‘time-zero’ from chemical shrinkage and autogenous strain measurements in cement paste. Paper presented at the Proceedings of International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation (pp. 20–23). Lyngby, Denmark.
- Sari, M., Prat, E., & Labastire, J. F. (1999). High strength self-compacting concrete original solutions associating organic and inorganic admixtures. Cement and Concrete Research, 29(6), 813–818. doi:https://doi.org/10.1016/S0008-8846(99)00037-X
- Soliman, A. M., & Nehdi, M. L. (2011). Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age. Materials and Structures, 44(5), 879–899. doi:https://doi.org/10.1617/s11527-010-9670-0
- Termkhajornkit, P., & Nawa, T. (2004). The fluidity of fly ash-cement paste containing naphthalene sulfonate superplasticizer. Cement and Concrete Research, 34(6), 1017–1024. doi:https://doi.org/10.1016/j.cemconres.2003.11.017
- TS EN 480-2. (2008). Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time. Ankara, Turkey: Turkish Standards Institute.
- Wetzel, A., Glotzbach, C., Maryamh, K., & Middendorf, B. (2015). Microstructural investigations on the skinning of ultra-high performance concrete. Cement and Concrete Composites, 57, 27–33. doi:https://doi.org/10.1016/j.cemconcomp.2014.11.010
- Wong, A. C. L., Childs, P. A., Berndt, R., Macken, T., Peng, G. D., & Gowripalan, N. (2007). Simultaneous measurement of shrinkage and temperature of reactive powder concrete at early-age using fibre Bragg grating sensors. Cement and Concrete Composites, 29(6), 490–497. doi:https://doi.org/10.1016/j.cemconcomp.2007.02.003
- Yigiter, H., Aydin, S., Yazici, H., & Yardimci, M. Y. (2012). Mechanical performance of low cement reactive powder concrete (LCRPC). Composites Part B: Engineering, 43(8), 2907–2914. doi:https://doi.org/10.1016/j.compositesb.2012.07.042
- Yoo, D. Y., Banthia, N., & Yoon, Y. S. (2015). Effectiveness of shrinkage-reducing admixture in reducing autogenous shrinkage stress of ultra-high-performance fiber-reinforced concrete. Cement and Concrete Composites, 64, 27–36. doi:https://doi.org/10.1016/j.cemconcomp.2015.09.005
- Yoo, D. Y., Banthia, N., & Yoon, Y. S. (2016a). Predicting service deflection of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP bars. Composites Part B: Engineering, 99, 381–397. doi:https://doi.org/10.1016/j.compositesb.2016.06.013
- Yoo, D. Y., Banthia, N., & Yoon, Y. S. (2016b). Flexural behavior of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP and steel rebars. Engineering Structures, 111, 246–262. doi:https://doi.org/10.1016/j.engstruct.2015.12.003
- Yoo, D. Y., Min, K. H., Lee, J. H., & Yoon, Y. S. (2014). Shrinkage and cracking of restrained ultra-high-performance fiber-reinforced concrete slabs at early age. Construction and Building Materials, 73, 357–365. doi:https://doi.org/10.1016/j.conbuildmat.2014.09.097
- Yoo, D. Y., Park, J. J., Kim, S. W., & Yoon, Y. S. (2014). Influence of reinforcing bar type on autogenous shrinkage stress and bond behavior of ultra high performance fiber reinforced concrete. Cement and Concrete Composites, 48, 150–161. doi:https://doi.org/10.1016/j.cemconcomp.2013.11.014
- Yoo, D. Y., Shin, H. O., Yang, J. M., & Yoon, Y. S. (2014). Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers. Composites Part B: Engineering, 58, 122–133. doi:https://doi.org/10.1016/j.compositesb.2013.10.081
- Yoo, D.-Y., Park, J.-J., Kim, S.-W., & Yoon, Y.-S. (2013). Combined effect of expansive and shrinkage-reducing admixtures on the properties of ultra high performance fiber-reinforced concrete. Journal of Composite Materials, 48(16), 1981–1991. doi:https://doi.org/10.1177/0021998313493809
- Zhang, J., & Li, V. C. (2001). Influences of fibers on drying shrinkage of fiber-reinforced cementitious composite. Journal of Engineering Mechanics, 127(1), 37–44. doi:https://doi.org/10.1061/(ASCE)0733-9399(2001)127:1(37)