References
- Adak, D., Sarkar, M., & Mandal, S. (2014). Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Construction and Building Materials, 70, 453–459. doi:https://doi.org/10.1016/j.conbuildmat.2014.07.093
- Anonym. (2018). İnşaat Güçlendirme Teknolojileri. Retrieved from http://www.kordsa.com/media/downloads/urun_pdf/kratos-pdf.pdf
- Arel, H. Ş., & Shaikh, F. (2018). Effects of fly ash fineness, nano silica, and curing types on mechanical and durability properties of fly ash mortars. Structural Concrete, 19(2), 597–607. doi:https://doi.org/10.1002/suco.201700007
- ASTM C618 - 17a. (n.d.). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. Retrieved from https://www.astm.org/Standards/C618.htm
- ASTM C67/C67M - 18. (n.d.). Standard test methods for sampling and testing brick and structural clay tile. Retrieved from https://www.astm.org/Standards/C67.htm
- Baradan, B., & Yazıcı, H. (2003). Betonarme Yapilarda Durabilite ve YS EN 206-1 Standardinin Getirdiği Yenilikler. TMH - Türkiye Mühendislik Haberleri, 426, 62–69.
- Barbosa, R., Lapa, N., Dias, D., & Mendes, B. (2013). Concretes containing biomass ashes: Mechanical, chemical, and ecotoxic performances. Construction and Building Materials, 48, 457–463. doi:https://doi.org/10.1016/j.conbuildmat.2013.07.031
- Benli, A., Karataş, M., & Gurses, E. (2017). Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume. Construction and Building Materials, 146, 464–474. doi:https://doi.org/10.1016/j.conbuildmat.2017.04.108
- Benli, A., Turk, K., & Kina, C. (2018). Influence of silica fume and class F fly ash on mechanical and rheological properties and freeze-thaw durability of self-compacting mortars. Journal of Cold Regions Engineering, 32(3), 04018009. doi:https://doi.org/10.1061/(ASCE)CR.1943-5495.0000167
- Bicer, A. (2018). Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites. Thermal Science and Engineering Progress, 8, 78–82. doi:https://doi.org/10.1016/j.tsep.2018.07.014
- Binici, H., Kaplan, H., Temiz, H., & Görür, E. B. (2008). Yüksek Firin Cürufu ve Bazaltik Pomza Katkili Betonlarin Bazi Durabilite Özellikleri. Mühendislik Bilimleri Dergisi, 14, 309–317.
- Cao, M., Xu, L., & Zhang, C. (2018). Rheological and mechanical properties of hybrid fiber reinforced cement mortar. Construction and Building Materials, 171, 736–742. doi:https://doi.org/10.1016/j.conbuildmat.2017.09.054
- Çavdar, A. (2014). Investigation of freeze–thaw effects on mechanical properties of fiber reinforced cement mortars. Composites Part B: Engineering, 58, 463–472. doi:https://doi.org/10.1016/j.compositesb.2013.11.013
- Cho, Y. K., Jung, S. H., & Choi, Y. C. (2019). Effects of chemical composition of fly ash on compressive strength of fly ash cement mortar. Construction and Building Materials, 204, 255–264. doi:https://doi.org/10.1016/j.conbuildmat.2019.01.208
- Sevim, Ö., & Demir, İ. (2018). Physical and permeability properties of cementitious mortars having fly ash with optimized particle size distribution. Cement and Concrete Composites, 96, 266–273. doi:https://doi.org/10.1016/j.cemconcomp.2018.11.017
- Donatello, S., Palomo, A., & Fernández-Jiménez, A. (2013). Durability of very high volume fly ash cement pastes and mortars in aggressive solutions. Cement and Concrete Composites, 38, 12–20. doi:https://doi.org/10.1016/j.cemconcomp.2013.03.001
- Eken, M. (2018). Investigation of stability properties of concrete produced by organic ashes and inorganic minerals. Kahramanmaraş: Kahramanmaraş Sütçü İmam University. Institute of Science and Technology.
- Ferrández, D., Saiz, P., Morón, C., Dorado, M. G., & Morón, A. (2019). Inductive method for the orientation of steel fibers in recycled mortars. Construction and Building Materials, 222, 243–253. doi:https://doi.org/10.1016/j.conbuildmat.2019.06.113
- Garcés, P., Andión, L. G., Zornoza, E., Bonilla, M., & Payá, J. (2010). The effect of processed fly ashes on the durability and the corrosion of steel rebars embedded in cement–modified fly ash mortars. Cement and Concrete Composites, 32(3), 204–210. doi:https://doi.org/10.1016/j.cemconcomp.2009.11.006
- Görhan, G., & Kürklü, G. (2016). Metakaolin Katkili Çimento Harç Özelliklerinin Araştirilmasi. Afyonkarahisar: A.K.Ü., BAPK, 14.HIZ.DES.69.
- Guerrero, A., Goñi, S., & Macı́as, A. (2000). Durability of new fly ash–belite cement mortars in sulfated and chloride medium. Cement and Concrete Research, 30(8), 1231–1238. doi:https://doi.org/10.1016/S0008-8846(00)00313-6
- Guler, S. (2018). The effect of polyamide fibers on the strength and toughness properties of structural lightweight aggregate concrete. Construction and Building Materials, 173, 394–402. doi:https://doi.org/10.1016/j.conbuildmat.2018.03.212
- Gümüş, A. (2016). Effect of thermal curing process on geopolymer concrete properties (M. Sc. Thesis). Turkey: Afyon Kocatepe University, Institute of Science and Technology.
- Hanjitsuwan, S., Phoo-Ngernkham, T., Li, L-y., Damrongwiriyanupap, N., & Chindaprasirt, P. (2018). Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive. Construction and Building Materials, 162, 714–723. doi:https://doi.org/10.1016/j.conbuildmat.2017.12.034
- Kallel, T., Kallel, A., & Samet, B. (2016). Durability of mortars made with sand washing waste. Construction and Building Materials, 122, 728–735. doi:https://doi.org/10.1016/j.conbuildmat.2016.06.086
- Karahan, O., & Atiş, C. D. (2011). The durability properties of polypropylene fiber reinforced fly ash concrete. Materials & Design, 32(2), 1044–1049. doi:https://doi.org/10.1016/j.matdes.2010.07.011
- Kesikidou, F., & Stefanidou, M. (2019). Natural fiber-reinforced mortars. Journal of Building Engineering, 25, 100786. doi:https://doi.org/10.1016/j.jobe.2019.100786
- Khotbehsara, M. M., Miyandehi, B. M., Naseri, F., Ozbakkaloglu, T., Jafari, F., & Mohseni, E. (2018). Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: Experimental observations and ANFIS predictions. Construction and Building Materials, 158, 823–834. doi:https://doi.org/10.1016/j.conbuildmat.2017.10.067
- Koroth, S. R. (1997). Evaluation and improvement of frost durability of clay bricks (PhD thesis). Concordia University, Canada,
- Lee, S. T. (2009). Influence of recycled fine aggregates on the resistance of mortars to magnesium sulfate attack. Waste Management, 29(8), 2385–2391. doi:https://doi.org/10.1016/j.wasman.2009.04.002
- Li, L. G., Zhao, Z. W., Zhu, J., Kwan, A. K. H., & Zeng, K. L. (2018). Combined effects of water film thickness and polypropylene fibre length on fresh properties of mortar. Construction and Building Materials, 174, 586–593. doi:https://doi.org/10.1016/j.conbuildmat.2018.03.259
- Mardani-Aghabaglou, A., İnan Sezer, G., & Ramyar, K. (2014). Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point. Construction and Building Materials, 70, 17–25. doi:https://doi.org/10.1016/j.conbuildmat.2014.07.089
- Maria, D. (2010). Methods for porosity measurement in lime-based mortars. Construction and Building Materials, 24(12), 2572–2578. doi:https://doi.org/10.1016/j.conbuildmat.2010.05.019
- Mironyuk, I., Tatarchuk, T., Paliychuk, N., Heviuk, I., Horpynko, A., Yarema, O., & Mykytyn, I. (2019). Effect of surface-modified fly ash on compressive strength of cement mortar. Materials Today: Proceedings. doi:https://doi.org/10.1016/j.matpr.2019.10.016.
- Modolo, R. C. E., Senff, L., Ferreira, V. M., Tarelho, L. A. C., & Moraes, C. (2018). Fly ash from biomass combustion as replacement raw material and its influence on the mortars durability. Journal of Material Cycles and Waste Management, 20(2), 1006–1015. doi:https://doi.org/10.1007/s10163-017-0662-9
- Moon, G. D., Oh, S., & Choi, Y. C. (2016). Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar. Construction and Building Materials, 124, 1072–1080. doi:https://doi.org/10.1016/j.conbuildmat.2016.08.148
- Nadeem, A., Memon, S. A., & Lo, T. Y. (2013). Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures. Construction and Building Materials, 38, 338–347. doi:https://doi.org/10.1016/j.conbuildmat.2012.08.042
- Nagaratnam, B. H., Faheem, A., Rahman, M. E., Mannan, M. A., & Leblouba, M. (2015). Mechanical and durability properties of medium strength self-compacting concrete with high-volume fly ash and blended aggregates. Periodica Polytechnica Civil Engineering, 59(2), 155–164. doi:https://doi.org/10.3311/PPci.7144
- Nawaz, A., Julnipitawong, P., Krammart, P., & Tangtermsirikul, S. (2016). Effect and limitation of free lime content in cement-fly ash mixtures. Construction and Building Materials, 102, 515–530. doi:https://doi.org/10.1016/j.conbuildmat.2015.10.174
- Nguyen, T. B. T., Chatchawan, R., Saengsoy, W., Tangtermsirikul, S., & Sugiyama, T. (2019). Influences of different types of fly ash and confinement on performances of expansive mortars and concretes. Construction and Building Materials, 209, 176–186. doi:https://doi.org/10.1016/j.conbuildmat.2019.03.032
- Nili, M., & Afroughsabet, V. (2010). The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete. Construction and Building Materials, 24(6), 927–933. doi:https://doi.org/10.1016/j.conbuildmat.2009.11.025
- Orban, Y. A., Manea, D. L., Aciu, C., & Mustea, A. (2018). Virtual manufacturing and mechanical properties of synthetic fiber-reinforced mortars. Procedia Manufacturing, 22, 262–267. doi:https://doi.org/10.1016/j.promfg.2018.03.040
- Pangdaeng, S., Phoongernkham, T., Sata, V., & Chindaprasirt, P. (2014). Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive. Materials & Design, 53, 269–274. doi:https://doi.org/10.1016/j.matdes.2013.07.018
- Saha, A. K. (2018). Effect of class F fly ash on the durability properties of concrete. Sustainable Environment Research, 28(1), 25–31. doi:https://doi.org/10.1016/j.serj.2017.09.001
- Saran, A. G. (2007). Effect of ground granulated blast furnace slag on durability properties of concrete. İstanbul: İstanbul Technical University, Institute of Science and Technology.
- Singh, R., Kumar, R., Ranjan, N., Penna, R., & Fraternali, F. (2018). On the recyclability of polyamide for sustainable composite structures in civil engineering. Composite Structures, 184, 704–713. doi:https://doi.org/10.1016/j.compstruct.2017.10.036
- Sirisawat, I., Saengsoy, W., Baingam, L., Krammart, P., & Tangtermsirikul, S. (2014). Durability and testing of mortar with interground fly ash and limestone cements in sulfate solutions. Construction and Building Materials, 64, 39–46. doi:https://doi.org/10.1016/j.conbuildmat.2014.04.083
- Song, P. S., Hwang, S., & Sheu, B. C. (2005). Strength properties of nylon-and polypropylene-fiber-reinforced concretes. Cement and Concrete Research, 35(8), 1546–1550. doi:https://doi.org/10.1016/j.cemconres.2004.06.033
- Spadea, S., Farina, I., Carrafiello, A., & Fraternali, F. (2015). Recycled nylon fibers as cement mortar reinforcement. Construction and Building Materials, 80, 200–209. doi:https://doi.org/10.1016/j.conbuildmat.2015.01.075
- Sumer, M. (2012). Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes. Construction and Building Materials, 34, 531–536. doi:https://doi.org/10.1016/j.conbuildmat.2012.02.023
- Teixeira, E. R., Mateus, R., Camões, A., & Branco, F. G. (2019). Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar. Construction and Building Materials, 197, 195–207. doi:https://doi.org/10.1016/j.conbuildmat.2018.11.173
- Temiz, H., & Kantarcı, F. (2014). Investigation of durability of CEM II B-M mortars and concrete with limestone powder, calcite powder and fly ash. Construction and Building Materials, 68, 517–524. doi:https://doi.org/10.1016/j.conbuildmat.2014.06.078
- TS EN 196-1. (2016). Methods of testing cement - Part 1: Determination of strength. Turkey: TSE.
- TS EN 771-1. (2015). Specification for masonry units - Part 1: Clay masonry units. Turkey: TSE.
- TS EN 772-4. (2000). Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units. TSE. Turkey.
- Wang, S., Llamazos, E., Baxter, L., & Fonseca, F. (2008). Durability of biomass fly ash concrete: Freezing and thawing and rapid chloride permeability tests. Fuel, 87(3), 359–364. doi:https://doi.org/10.1016/j.fuel.2007.05.027
- Wongprachum, W., Sappakittipakorn, M., Sukontasukkul, P., Chindaprasirt, P., & Banthia, N. (2018). Resistance to sulfate attack and underwater abrasion of fiber reinforced cement mortar. Construction and Building Materials, 189, 686–694. doi:https://doi.org/10.1016/j.conbuildmat.2018.09.043
- Yildirim, K., & Sümer, M. (2013). Effects of sodium chloride and magnesium sulfate concentration on the durability of cement mortar with and without fly ash. Composites Part B: Engineering, 52, 56–61. doi:https://doi.org/10.1016/j.compositesb.2013.03.040