References
- Alecci, V., Fagone, M., Rotunno, T., & De Stefano, M. (2013). Shear strength of brick masonry walls assembled with different types of mortar. Construction and Building Materials, 40, 1038–1045. doi:https://doi.org/10.1016/j.conbuildmat.2012.11.107
- Ang, A. H.-S., & Tang, W. H. (1975). Probability concepts in engineering planning and design. Volume 1 basic principles. New York, NY: John Wiley & Sons, Inc.
- ASCE/SEI7-10. (2016). Minimum design loads for buildings and other structures. Reston, VA: American Society of Civil Engineers. doi:https://doi.org/10.1061/9780784414248.
- Atamturktur, S., Hemez, F. M., & Laman, J. A. (2012). Uncertainty quantification in model verification and validation as applied to large scale historic masonry monuments. Engineering Structures, 43, 221–234. doi:https://doi.org/10.1016/j.engstruct.2012.05.027
- Au, S.-K., & Beck, J. L. (2001). Estimation of small failure probabilities in high dimensions by subset simulation. Probabilistic Engineering Mechanics, 16(4), 263–277. doi:https://doi.org/10.1016/S0266-8920(01)00019-4
- Candès, E. J., Romberg, J. K., & Tao, T. (2006). Stable signal recovery from incomplete and inaccurate measurements. Communications on Pure and Applied Mathematics, 59(8), 1207–1223. doi:https://doi.org/10.1002/cpa.20124
- Cheng, G., Li, G., & Cai, Y. (1998). Reliability-based structural optimization under hazard loads. Structural Optimization, 16(2–3), 128–135. doi:https://doi.org/10.1007/BF01202823
- Clough, R. W., & Penzien, J. (2003). Dynamics of structures (3rd ed.). Berkeley, CA: Computers & Structures, Inc. doi:https://doi.org/10.1002/9781118599792.
- David, H. A., & Nagaraja, H. N. (2003). Order statistics (3rd ed.). Hkboken, NJ: Joha Wiley & Sons, Inc.
- Der Kiureghian, A., & De Stefano, M. (1991). Efficient algorithm for second‐order reliability analysis. Journal of Engineering Mechanics, 117(12), 2904–2923. doi:https://doi.org/10.1061/(ASCE)0733-9399(1991)117:12(2904)
- Der Kiureghian, A., & Liu, P. L. (1986). Structural reliability under incomplete probability information. Journal of Engineering Mechanics, 112(1), 85–104. doi:https://doi.org/10.1061/(ASCE)0733-9399(1986)112:1(85)
- Dubourg, V., Sudret, B., & Deheeger, F. (2013). Metamodel-based importance sampling for structural reliability analysis. Probabilistic Engineering Mechanics, 33, 47–57. doi:https://doi.org/10.1016/j.probengmech.2013.02.002
- Dymiotis, C., & Gutlederer, B. M. (2002). Allowing for uncertainties in the modelling of masonry compressive strength. Construction and Building Materials, 16(8), 443–452. doi:https://doi.org/10.1016/S0950-0618(02)00108-3
- EN1998/Eurocde8. (2004). Design provisions for earthquake resistance of structures. Brussel: Comité Européen de Normalisation.
- Fiessler, B., Rackwitz, R., & Neumann, H.-J. (1979). Quadratic limit states in structural reliability. Journal of Engineering Mechanics Division, 105(4), 661–676.
- Fujimura, K., & Der Kiureghian, A. (2007). Tail-equivalent linearization method for nonlinear random vibration. Probabilistic Engineering Mechanics, 22(1), 63–76. doi:https://doi.org/10.1016/j.probengmech.2006.08.001
- Gao, X. W., & Bao, A. B. (1985). Probabilistic model and its statistical parameters for seismic load. Earthquake Engineering and Engineering Vibration, 5(1), 13–22 (in Chinese).
- GB50003. (2011). Code for design of masonry structures. Beijing: Ministry of Housing and Urban-Rural Development of People’s Republic of China.
- Grimm, C. T. (1988). Brick masonry workmanship statistics. Journal of Construction Engineering and Management, 114(1), 147–149. doi:https://doi.org/10.1061/(ASCE)0733-9364(1988)114:1(147)
- Haach, V. G., Vasconcelos, G., & Lourenço, P. B. (2013). Proposal of a design model for masonry walls subjected to in-plane loading. Journal of Structural Engineering, 139(4), 537–547. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0000636
- Hasofer, A. M., & Lind, N. C. (1974). An exact and invariant first order reliability format. Journal of the Engineering Mechanics Division, 100(1), 111–121.
- Hong, H. P., Hong, P., & Wang, W. (2010). Reliability of steel frames designed in accordance with the National Building Code of Canada seismic provisions and its implication in codified design. Engineering Structures, 32(5), 1284–1291. doi:https://doi.org/10.1016/j.engstruct.2010.01.005
- Hu, X. Z., & Zhang, P. (2006). Reliability analysis of masonry structure with intermediate state. Journal of Xi’an Univeristy of Architecture & Technology (Natural Science Edtion), 38(4), 580–584. in Chinese)
- ISO2394. (2015). General principles on reliability for structures. Geneva, Switzerland: International Organization for Standardization.
- Joint Committee on Structural Safety (JCSS). (2001). JCSS probabilistic model code. Kgs. Lyngby: Author.
- Kržan, M., Gostic, S., Cattari, S., & Bosiljkov, V. (2015). Acquiring reference parameters of masonry for the structural performance analysis of historical buildings. Bulletin of Earthquake Engineering, 13(1), 203–236. doi:https://doi.org/10.1007/s10518-014-9686-x
- Lu, Z., Song, S., Yue, Z., & Wang, J. (2008). Reliability sensitivity method by line sampling. Structural Safety, 30(6), 517–532. doi:https://doi.org/10.1016/j.strusafe.2007.10.001
- Melchers, R. E. (1994). Structural system reliability assessment using directional simulation. Structural Safety, 16(1–2), 23–37. doi:https://doi.org/10.1016/0167-4730(94)00026-M
- Montoya-Noguera, S., Zhao, T. Y., Hu, Y., Wang, Y., & Phoon, K. K. (2019). Simulation of non-stationary non-Gaussian random fields from sparse measurements using Bayesian compressive sampling and Karhunen-Loève expansion. Structural Safety, 79, 66–79. doi:https://doi.org/10.1016/j.strusafe.2019.03.006
- Nie, J., & Ellingwood, B. (2000). Directional methods for structural reliability analysis. Structural Safety, 22(3), 233–249. doi:https://doi.org/10.1016/S0167-4730(00)00014-X
- Ono, T., & Idota, H. (1986). Development of high-order moment stand- ardization method into structural design and its efficiency. Journal of Structural and Construction Engineering (Transactions of Aij), 365, 40–47. doi:https://doi.org/10.3130/aijsx.365.0_40
- Peng, B., Wei, S. D., Zong, G., & Wang, D. D. (2019). Shear resistance estimation for unreinforced masonry walls based on Gaussian process models. Advances in Structural Engineering, 22(3), 831–845. doi:https://doi.org/10.1177/1369433218802435
- Pradlwarter, H. J., & Schuëller, G. I. (2010). Local domain Monte Carlo simulation. Structural Safety, 32(5), 275–280. doi:https://doi.org/10.1016/j.strusafe.2010.03.009
- Rackwitz, R. (2001). Reliability analysis - a review and some perspective. Structural Safety, 23(4), 365–395. doi:https://doi.org/10.1016/S0167-4730(02)00009-7
- Rackwitz, R., & Fiessler, B. (1978). Structural reliability under combined random load sequences. Computers & Structures, 9(5), 489–494. doi:https://doi.org/10.1016/0045-7949(78)90046-9
- Rasmussen, C. E., & Williams, C. K. I. (2006). Gaussian processes for machine learning. Cambridge: The MIT Press.
- Richard, B., Adelaide, L., & Cremona, C. (2012). A Bayesian approach to estimate material properties from global statistical data. European Journal of Environmental and Civil Engineering, 16(3–4), 460–470. doi:https://doi.org/10.1080/19648189.2012.667999
- Roberts, J. B., & Spanos, P. D. (1990). Random vibration and statistical linearization. Chichester: John Wiley and Sons.
- Roudak, M. A., Shayanfar, M. A., Barkhordari, M. A., & Karamloo, M. (2017). A robust approximation method for nonlinear cases of structural reliability analysis. International Journal of Mechanical Sciences, 133(May), 11–20. doi:https://doi.org/10.1016/j.ijmecsci.2017.08.038
- Shinozuka, M. (1983). Basic analysis of structural safety. Journal of Structural Engineering, 109(3), 721–740. doi:https://doi.org/10.1061/(ASCE)0733-9445(1983)109:3(721)
- Spence, S. M. J., Gioffrè, M., & Grigoriu, M. D. (2008). Probabilistic models and simulation of irregular masonry walls. Journal of Engineering Mechanics, 134(9), 750–762. doi:https://doi.org/10.1061/(ASCE)0733-9399(2008)134:9(750)
- Tabbakhha, M., & Deodatis, G. (2017). Effect of uncertainty of tensile strength of mortar joints on the behavior of masonry walls under lateral loads. Journal of Structural Engineering, 143(2), 04016166. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0001640
- Theodossopoulos, D., & Sinha, B. (2013). A review of analytical methods in the current design processes and assessment of performance of masonry structures. Construction and Building Materials, 41, 990–1001. doi:https://doi.org/10.1016/j.conbuildmat.2012.07.095
- Valdebenito, M. A., Pradlwarter, H. J., & Schuëller, G. I. (2010). The role of the design point for calculating failure probabilities in view of dimensionality and structural nonlinearities. Structural Safety, 32(2), 101–111. doi:https://doi.org/10.1016/j.strusafe.2009.08.004
- Verma, R., & Basu, D. (2017). On correlating the modulus of elasticity of stack-bonded flyash brick masonry using impact hammer and compression tests. European Journal of Environmental and Civil Engineering. doi:https://doi.org/10.1080/19648189.2017.1410232
- Xiao, S., & Lu, Z. (2018). Reliability analysis by combining higher-order unscented transformation and fourth-moment method. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 4(1), 04017034. doi:https://doi.org/10.1061/AJRUA6.0000944
- Zhao, Y. G., & Ono, T. (1999). A general procedure for first/second-order reliability method (FORM/SORM). Structural Safety, 21(2), 95–112. doi:https://doi.org/10.1016/S0167-4730(99)00008-9
- Zhuang, Y. Z., & Jin, W. L. (1998). Aseismic reliability analysis approach for offshore jacket platform structures. China Ocean Engineering, 12(4), 375–382.