References
- Aasly, K., Malvik, T., & Myrhaug, E. (2007). Advanced methods to characterize thermal properties of quartz. Infacon Xi, 1, 381–392.
- Ahmad, S., Barbhuiya, S., Elahi, A., & Iqbal, J. (2011). Effect of Pakistani bentonite on properties of mortar and concrete. Clay Minerals, 46(1), 85–92. doi:https://doi.org/10.1180/claymin.2011.046.1.85
- Al-Rawas, A. A., Hago, A. W., Corcoran, T. C., & Al-Ghafri, K. M. (1998). Properties of Omani artificial pozzolana (sarooj). Applied Clay Science, 13(4), 275–292. doi:https://doi.org/10.1016/S0169-1317(98)00029-5
- Alujas, A., Fernández, R., Quintana, R., Scrivener, K. L., & Martirena, F. (2015). Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration. Applied Clay Science, 108, 94–101. doi:https://doi.org/10.1016/j.clay.2015.01.028
- Ambroise, J., Murat, M., & Pera, J. (1985). Hydration reaction and hardening of calcined clays and related minerals V. Extension of the research and general conclusions. Cement and Concrete Research, 15(2), 261–268. doi:https://doi.org/10.1016/0008-8846(85)90037-7
- Bai, J., & Gailius, A. (2009). Consistency of fly ash and metakaolin concrete. Journal of Civil Engineering and Management, 15(2), 131–135. doi:https://doi.org/10.3846/1392-3730.2009.15.131-135
- Bich, C., Ambroise, J., & Péra, J. (2009). Influence of degree of dehydroxylation on the pozzolanic activity of metakaolin. Applied Clay Science, 44(3–4), 194–200. doi:https://doi.org/10.1016/j.clay.2009.01.014
- Buchwald, A., Hohmann, M., Posern, K., & Brendler, E. (2009). The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders. Applied Clay Science, 46(3), 300–304. doi:https://doi.org/10.1016/j.clay.2009.08.026
- Chakchouk, A., Samet, B., & Mnif, T. (2006). Study on the potential use of Tunisian clays as pozzolanic material. Applied Clay Science, 33(2), 79–88. doi:https://doi.org/10.1016/j.clay.2006.03.009
- Chikouche, M. A., Ghorbel, E., & Bibi, M. (2016). The possibility of using dredging sludge in manufacturing cements: Optimization of heat treatment cycle and ratio replacement. Construction and Building Materials, 106, 330–341. doi:https://doi.org/10.1016/j.conbuildmat.2015.12.128
- Darweesh, H., & Nagieb, Z. (2007). Hydration of calcined bentonite Portland blended cement pastes. Indian Journal of Chemical Technology, 14(3), 301–307.
- Domone, P., & Jin, J. (1999). Properties of mortar for self-compacting concrete. Proceedings of the 1st international RILEM symposium on self-compacting concrete, pp. 109–120. Stockholm, Sweden.
- Duxson, P., Provis, J. L., Lukey, G. C., & Van Deventer, J. S. (2007). The role of inorganic polymer technology in the development of ‘green concrete. Cement and Concrete Research, 37(12), 1590–1597. doi:https://doi.org/10.1016/j.cemconres.2007.08.018
- Elimbi, A., Tchakoute, H., & Njopwouo, D. (2011). Effects of calcination temperature of kaolinite clays on the properties of geopolymer cements. Construction and Building Materials, 25(6), 2805–2812. doi:https://doi.org/10.1016/j.conbuildmat.2010.12.055
- Essaidi, N., Samet, B., Baklouti, S., & Rossignol, S. (2014). Feasibility of producing geopolymers from two different Tunisian clays before and after calcination at various temperatures. Applied Clay Science, 88, 221–227. doi:https://doi.org/10.1016/j.clay.2013.12.006
- Fernandez, R., Martirena, F., & Scrivener, K. L. (2011). The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite. Cement and Concrete Research, 41(1), 113–122. doi:https://doi.org/10.1016/j.cemconres.2010.09.013
- Frías, M., Vigil, R., García, R., Rodríguez, O., Goñi, S., & Vegas, I. (2012). Evolution of mineralogical phases produced during the pozzolanic reaction of different metakaolinite by-products: Influence of the activation process. Applied Clay Science, 56, 48–52. doi:https://doi.org/10.1016/j.clay.2011.11.022
- Garg, N., & Skibsted, J. (2016). Pozzolanic reactivity of a calcined interstratified illite/smectite (70/30) clay. Cement and Concrete Research, 79, 101–111. doi:https://doi.org/10.1016/j.cemconres.2015.08.006
- Gridi-Bennadji, F., Beneu, B., Laval, J.-P., & Blanchart, P. (2008). Structural transformations of muscovite at high temperature by X-ray and neutron diffraction. Applied Clay Science, 38(3–4), 259–267. doi:https://doi.org/10.1016/j.clay.2007.03.003
- Güneyisi, E., & Gesoğlu, M. (2008). Properties of self-compacting mortars with binary and ternary cementitious blends of fly ash and metakaolin. Materials and Structures, 41(9), 1519–1531. doi:https://doi.org/10.1617/s11527-007-9345-7
- Hassan, A. A., & Mayo, J. R. (2014). Influence of mixture composition on the properties of SCC incorporating metakaolin. Magazine of Concrete Research, 66(20), 1036–1050. doi:https://doi.org/10.1680/macr.14.00060
- Hollanders, S., Adriaens, R., Skibsted, J., Cizer, Ö., & Elsen, J. (2016). Pozzolanic reactivity of pure calcined clays. Applied Clay Science, 132, 552–560. doi:https://doi.org/10.1016/j.clay.2016.08.003
- Janotka, I., Puertas, F., Palacios, M., Kuliffayová, M., & Varga, C. (2010). Metakaolin sand–blended-cement pastes: Rheology, hydration process and mechanical properties. Construction and Building Materials, 24(5), 791–802. doi:https://doi.org/10.1016/j.conbuildmat.2009.10.028
- Jiang, T., Li, G., Qiu, G., Fan, X., & Huang, Z. (2008). Thermal activation and alkali dissolution of silicon from illite. Applied Clay Science, 40(1–4), 81–89. doi:https://doi.org/10.1016/j.clay.2007.08.002
- Kavitha, O., Shanthi, V., Arulraj, G. P., & Sivakumar, V. (2016). Microstructural studies on eco-friendly and durable Self-compacting concrete blended with metakaolin. Applied Clay Science, 124, 143–149. doi:https://doi.org/10.1016/j.clay.2016.02.011
- Knight, W. (1897). Mineral soap. Engineering and Mining Journal, 63, 600–601.
- Liew, Y. M., Kamarudin, H., Al Bakri, A. M., Luqman, M., Nizar, I. K., Ruzaidi, C. M., & Heah, C. Y. (2012). Processing and characterization of calcined kaolin cement powder. Construction and Building Materials, 30, 794–802. doi:https://doi.org/10.1016/j.conbuildmat.2011.12.079
- Lothenbach, B., Scrivener, K., & Hooton, R. (2011). Supplementary cementitious materials. Cement and Concrete Research, 41(12), 1244–1256. doi:https://doi.org/10.1016/j.cemconres.2010.12.001
- Madandoust, R., & Mousavi, S. Y. (2012). Fresh and hardened properties of self-compacting concrete containing metakaolin. Construction and Building Materials, 35, 752–760. doi:https://doi.org/10.1016/j.conbuildmat.2012.04.109
- Mardani-Aghabaglou, A., Sezer, G. İ., & Ramyar, K. (2014). Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point. Construction and Building Materials, 70, 17–25. doi:https://doi.org/10.1016/j.conbuildmat.2014.07.089
- Marsh, B. K., & Day, R. L. (1988). Pozzolanic and cementitious reactions of fly ash in blended cement pastes. Cement and Concrete Research, 18(2), 301–310. doi:https://doi.org/10.1016/0008-8846(88)90014-2
- Martinez-Reyes, J., Alavez-Ramírez, R., Montes-García, P., & Jiménez-Quero, V. (2010). Mineralogical effect on the pozzolanic reactivity of a Mexican lacustrine soil. Construction and Building Materials, 24(12), 2650–2657. doi:https://doi.org/10.1016/j.conbuildmat.2010.04.059
- Mechti, W., Mnif, T., Chaabouni, M., & Rouis, J. (2014). Formulation of blended cement by the combination of two pozzolans: Calcined clay and finely ground sand. Construction and Building Materials, 50, 609–616. doi:https://doi.org/10.1016/j.conbuildmat.2013.10.021
- Melo, K. A., & Carneiro, A. M. (2010). Effect of Metakaolin’s finesses and content in self-consolidating concrete. Construction and Building Materials, 24(8), 1529–1535. doi:https://doi.org/10.1016/j.conbuildmat.2010.02.002
- Memon, S. A., Arsalan, R., Khan, S., & Lo, T. Y. (2012). Utilization of Pakistani bentonite as partial replacement of cement in concrete. Construction and Building Materials, 30, 237–242. doi:https://doi.org/10.1016/j.conbuildmat.2011.11.021
- Mirza, J., Riaz, M., Naseer, A., Rehman, F., Khan, A., & Ali, Q. (2009). Pakistani bentonite in mortars and concrete as low cost construction material. Applied Clay Science, 45(4), 220–226. doi:https://doi.org/10.1016/j.clay.2009.06.011
- Mohammed, S. (2017). Processing, effect and reactivity assessment of artificial pozzolans obtained from clays and clay wastes: A review. Construction and Building Materials, 140, 10–19. doi:https://doi.org/10.1016/j.conbuildmat.2017.02.078
- Mohammed, S., Elhem, G., & Mekki, B. (2016). Valorization of pozzolanicity of Algerian clay: Optimization of the heat treatment and mechanical characteristics of the involved cement mortars. Applied Clay Science, 132, 711–721. doi:https://doi.org/10.1016/j.clay.2016.08.027
- Morsy, M., Al-Salloum, Y., Abbas, H., & Alsayed, S. (2012). Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures. Construction and Building Materials, 35, 900–905. doi:https://doi.org/10.1016/j.conbuildmat.2012.04.099
- Okamura, H., & Ouchi, M. (2003). Self-compacting concrete. Journal of Advanced Concrete Technology, 1(1), 5–15. doi:https://doi.org/10.3151/jact.1.5
- Paiva, H., Velosa, A., Cachim, P., & Ferreira, V. (2012). Effect of metakaolin dispersion on the fresh and hardened state properties of concrete. Cement and Concrete Research, 42(4), 607–612. doi:https://doi.org/10.1016/j.cemconres.2012.01.005
- Paluszkiewicz, C., Holtzer, M., & Bobrowski, A. (2008). FTIR analysis of bentonite in moulding sands. Journal of Molecular Structure, 880(1–3), 109–114. doi:https://doi.org/10.1016/j.molstruc.2008.01.028
- Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2003). Performance of metakaolin concrete at elevated temperatures. Cement and Concrete Composites, 25(1), 83–89. doi:https://doi.org/10.1016/S0958-9465(01)00061-0
- Rajczyk, J., & Langier, B. (2012). Concrete composite properties with modified sodium bentonite in material application engineering. Advanced Materials Research, 583, 154–157. doi:https://doi.org/10.4028/www.scientific.net/AMR.583.154
- Sabir, B., Wild, S., & Bai, J. (2001). Metakaolin and calcined clays as pozzolans for concrete: A review. Cement and Concrete Composites, 23(6), 441–454. doi:https://doi.org/10.1016/S0958-9465(00)00092-5
- Sadique, M., Al-Nageim, H., Atherton, W., Seton, L., & Dempster, N. (2012). A laboratory study for full cement replacement by fly ash and silica fume. Magazine of Concrete Research, 64(12), 1135–1142. doi:https://doi.org/10.1680/macr.12.00025
- Sadrmomtazi, A., Tahmouresi, B., & Khoshkbijari, R. K. (2018). Effect of fly ash and silica fume on transition zone, pore structure and permeability of concrete. Magazine of Concrete Research, 70(10), 519–532. doi:https://doi.org/10.1680/jmacr.16.00537
- Şahmaran, M., Christianto, H. A., & Yaman, İ Ö. (2006). The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars. Cement and Concrete Composites, 28(5), 432–440. doi:https://doi.org/10.1016/j.cemconcomp.2005.12.003
- Sakizci, M., Alver, B. E., & Yörükoğullari, E. (2009). Thermal behavior and immersion heats of selected clays from Turkey. Journal of Thermal Analysis and Calorimetry, 98(2), 429–436. doi:https://doi.org/10.1007/s10973-009-0294-y
- Samet, B., & Chaabouni, M. (2004). Characterization of the Tunisian blast-furnace slag and its application in the formulation of a cement. Cement and Concrete Research, 34(7), 1153–1159. doi:https://doi.org/10.1016/j.cemconres.2003.12.021
- Sanders, J., & Gallagher, P. (2005). Kinetic analyses using simultaneous TG/DSC measurements. Journal of Thermal Analysis and Calorimetry, 82(3), 659–664. doi:https://doi.org/10.1007/s10973-005-0946-5
- Seiffarth, T., Hohmann, M., Posern, K., & Kaps, C. (2013). Effect of thermal pre-treatment conditions of common clays on the performance of clay-based geopolymeric binders. Applied Clay Science, 73, 35–41. doi:https://doi.org/10.1016/j.clay.2012.09.010
- Shi, C., Jiménez, A. F., & Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to Portland cement. Cement and Concrete Research, 41(7), 750–763. doi:https://doi.org/10.1016/j.cemconres.2011.03.016
- Sperinck, S., Raiteri, P., Marks, N., & Wright, K. (2011). Dehydroxylation of kaolinite to metakaolin—a molecular dynamics study. Journal of Materials Chemistry, 21(7), 2118–2125. doi:https://doi.org/10.1039/C0JM01748E
- Sugamata, Y. E. T., & Ouchi, M. (2003). A mix-design method for self-compacting concrete based on mortar flow and funnel tests. In O. Wallevik & I. Nielsson (Eds.), PRO 33: 3rd International RILEM Symposium on Self-Compacting Concrete (pp. 345–354) RILEM Publications SARL.
- Taylor-Lange, S. C., Lamon, E. L., Riding, K. A., & Juenger, M. C. (2015). Calcined kaolinite–bentonite clay blends as supplementary cementitious materials. Applied Clay Science, 108, 84–93. doi:https://doi.org/10.1016/j.clay.2015.01.025
- Tironi, A., Castellano, C. C., Bonavetti, V. L., Trezza, M. A., Scian, A. N., & Irassar, E. F. (2014). Kaolinitic calcined clays–Portland cement system: Hydration and properties. Construction and Building Materials, 64, 215–221. doi:https://doi.org/10.1016/j.conbuildmat.2014.04.065
- Tironi, A., Trezza, M. A., Scian, A. N., & Irassar, E. F. (2012). Kaolinitic calcined clays: Factors affecting its performance as pozzolans. Construction and Building Materials, 28(1), 276–281. doi:https://doi.org/10.1016/j.conbuildmat.2011.08.064
- Uchima, J. S., Restrepo, O. J., & Tobón, J. I. (2015). Pozzolanicity of the material obtained in the simultaneous calcination of biomass and kaolinitic clay. Construction and Building Materials, 95, 414–420. doi:https://doi.org/10.1016/j.conbuildmat.2015.07.104
- Uysal, M., & Yilmaz, K. (2011). Effect of mineral admixtures on properties of self-compacting concrete. Cement and Concrete Composites, 33(7), 771–776. doi:https://doi.org/10.1016/j.cemconcomp.2011.04.005
- Walters, G. V., & Jones, T. R. (1991). Effect of metakaolin on alkali-silica reaction (ASR) in concrete manufactured with reactive aggregate. Special Publication, 126, 941–954.
- Zadražil, T., Vodák, F., & Kapičková, O. (2004). Effect of temperature and age of concrete on strength–porosity relation. Acta Polytechnica, 44(1), 53–56.