References
- Fu, Z. Z., Chen, S. S., & Han, H. Q. (2016). Experimental investigations on the residual strain behavior of a rockfill material subjected to dynamic loading. Journal of Materials in Civil Engineering, 29(5), 04016278. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001816
- Ismail, M. A., Joer, H. A., Sim, W. H., & Randolph, M. F. (2002). Effect of cement type on shear behavior of cemented calcareous soil. Journal of Geotechnical and Geoenvironmental Engineering, 128(6), 520–529. https://doi.org/https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(520)
- Lade, P. V., & Liu, C. T. (1998). Experimental study of drained creep behavior of sand. Journal of Engineering Mechanics, 124(8), 912–920. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(912)
- Menq, F. Y. (2003). Dynamic properties of sandy and gravelly soils. [PhD thesis]. University of Texas.
- Schofield, A. N., & Wroth, C. P. (1968). Critical state soil mechanics. McGraw-Hill.
- Al Qabany, A., & Soga, K. (2013). Effect of chemical treatment used in MICP on engineering properties of cemented soils. Géotechnique, 63(4), 331–339. https://doi.org/https://doi.org/10.1680/geot.SIP13.P.022
- Arroyo, M., Amaral, M. F., Romero, E., & Viana da Fonseca, A. (2013). Viana da Fonseca A. Isotropic yielding of unsaturated cemented silty sand. Canadian Geotechnical Journal, 50(8), 807–819. https://doi.org/https://doi.org/10.1139/cgj-2012-0216
- Burland, J. B. (1990). On the compressibility and shear strength of natural clays. Géotechnique, 40(3), 329–378. https://doi.org/https://doi.org/10.1680/geot.1990.40.3.329
- Chang, C. S., Misra, A., & Sundaram, S. S. (1990). Micromechanical modelling of cemented sands under low amplitude oscillations. Géotechnique, 40(2), 251–263. https://doi.org/https://doi.org/10.1680/geot.1990.40.2.251
- Chang, T. S., & Woods, R. D. (1992). Effect of particle contact bond on shear modulus. Journal of Geotechnical Engineering, 118(8), 1216–1233. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9410(1992)118:8(1216)
- Clough, G. W., Iwabuchi, J., Rad, N. S., & Kuppusamy, T. (1989). Influence of cementation on the liquefaction of sands. Journal of Geotechnical Engineering, ASCE, 115(8), 1102–1117. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9410(1989)115:8(1102)
- Clough, G. W., Sitar, N., Bachus, R. C., & Rad, N. S. (1981). Cemented sands under static loading. Journal of Geotechnical Engineering, ASCE, 107(6), 799–817.
- Consoli, N. C., Cruz, R. C., Consoli, B. S., & Maghous, S. (2012a). Failure envelope of artificially cemented sand. Géotechnique, 62(6), 543–547. https://doi.org/https://doi.org/10.1680/geot.11.P.037
- Consoli, N. C., Fonseca, A. V., Cruz, R. C., & Silva, S. R. (2011). Voids/cement ratio controlling tensile strength of cement-treated soils. Journal of Geotechnical and Geoenvironmental Engineering, 137(11), 1126–1131. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0000524
- Consoli, N. C., Fonseca, A. V., Silva, S. R., Cruz, R. C., & Fonini, A. (2012b). Parameters controlling stiffness and strength of artificially cemented soils. Géotechnique, 62(2), 177–183. https://doi.org/https://doi.org/10.1680/geot.8.P.084
- Consoli, N. C., Rotta, G. V., & Prietto, P. D. M. (2000). The influence of curing under stress on the triaxial response of cemented soils. Géotechnique, 50(1), 99–105. https://doi.org/https://doi.org/10.1680/geot.2000.50.1.99
- Coop, M. R., & Atkinson, J. H. (1993). The mechanics of cemented carbonate sands. Géotechnique, 43(1), 53–67. https://doi.org/https://doi.org/10.1680/geot.1993.43.1.53
- Cuccovillo, T., & Coop, M. R. (1997). Yielding and pre-failure deformation of structured sands. Géotechnique, 47(3), 491–508. https://doi.org/https://doi.org/10.1680/geot.1997.47.3.491
- Cuccovillo, T., & Coop, M. R. (1999). On the mechanics of structured sands. Géotechnique, 49(6), 741–760. https://doi.org/https://doi.org/10.1680/geot.1999.49.6.741
- Dano, C., Hicher, P. Y., & Tailliez, S. (2004). Engineering properties of grouted sands. Journal of Geotechnical and Geoenvironmental Engineering, 130(3), 328–338. https://doi.org/https://doi.org/10.1061/(ASCE)1090-0241(2004)130:3(328)
- DeJong, J. T., Mortensen, B. M., Martinez, B. C., & Nelson, D. C. (2010). Bio-mediated soil improvement. Ecological Engineering, 36(2), 197–210. https://doi.org/https://doi.org/10.1016/j.ecoleng.2008.12.029
- Delfosse-Ribay, E., Djeran-Maigre, I., Cabrillac, R., & Gouvenot, D. (2007). Comparison of creep behavior and fatigue behavior of grouted sand. Soils and Foundations, 47(2), 185–194. https://doi.org/https://doi.org/10.3208/sandf.47.185
- Fahoum, K., Aggour, M. S., & Amini, F. (1996). Dynamic properties of cohesive soils treated with lime. Journal of Geotechnical Engineering, 122(5), 382–389. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9410(1996)122:5(382)
- Fernandez, A. L., & Santamarina, J. C. (2001). Effect of cementation on the small-strain parameters of sands. Canadian Geotechnical Journal, 38(1), 191–199. https://doi.org/https://doi.org/10.1139/t00-081
- Fu, Z. Z., Chen, S. S., & Ji, E. Y. (2018). Practices in constructing high rockfill dams on thick overburden layers. In H. Tosun (Ed.), Dam engineering. ISBN 978-953-51-6700-6.
- Fu, Z. Z., Zhang, Y. J., Chen, S. S., & Yuan, J. (2019). A tangential modulus model for coarse granular materials and the corresponding method for parameter identification. Hydro-Science and Engineering, 2019, 1, 1-10. https://doi.org/https://doi.org/10.16198/j.cnki.1009-640X.2019.01.001.
- Gouvenot, D. (1998). State of the art in European grouting. Proceedings of the Institution of Civil Engineers - Ground Improvement, 2(2), 51–67. https://doi.org/https://doi.org/10.1680/gi.1998.020201
- Hardin, B. O., & Drnevich, V. P. (1972). Shear modulus and damping in soils: design equations and curves. Journal of Soil Mechanics and Foundations Division, ASCE, 98(SM7), 667–692.
- Hu, W., Dano, C., Hicher, P.-Y., Le Touzo, J.-Y., Derkx, F., & Merliot, E. (2011). Effect of sample size on the behavior of granular materials. Geotechnical Testing Journal, 34(3), 103095–103197. https://doi.org/https://doi.org/10.1520/GTJ103095
- Ismail, M. A., Joer, H. A., & Randolph, M. F. (2000). Sample preparation techniques for artificially cemented soils. Geotechnical Testing Journal, 23(2), 171–177. https://doi.org/https://doi.org/10.1520/GTJ11041J
- Jiang, N. J., & Soga, K. (2017). The applicability of microbially induced calcite precipitation (MICP) for internal erosion control in gravel-sand mixtures. Géotechnique, 67(1), 42–55. https://doi.org/https://doi.org/10.1680/jgeot.15.P.182
- Kaga, M., & Yonekura, R. (1991). Estimation of strength of silicate-grouted sand. Soils and Foundations, 31(3), 43–59. https://doi.org/https://doi.org/10.3208/sandf1972.31.3_43
- Ladd, R. S. (1978). Preparing test specimens using under-compaction. Geotechnical Testing Journal, 1(1), 16–23. https://doi.org/https://doi.org/10.1520/GTJ10364J
- Lade, P. V., & Overton, D. D. (1989). Cementation effects in frictional materials. Journal of Geotechnical Engineering, 115(10), 1373–1387. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9410(1989)115:10(1373)
- Lehane, B. M., & Guo, F. (2017). Lateral response of piles in cemented sand. Géotechnique, 67(7), 597–607. https://doi.org/https://doi.org/10.1680/jgeot.16.P.132
- Leroueil, S., & Vaughan, P. R. (1990). The general and congruent effects of structure in natural soils and weak rocks. Géotechnique, 40(3), 467–488. https://doi.org/https://doi.org/10.1680/geot.1990.40.3.467
- Liu, M. D., & Carter, J. P. (1999). Virgin compression of structured soils. Géotechnique, 49(1), 43–57. https://doi.org/https://doi.org/10.1680/geot.1999.49.1.43
- Liu, H. L., Kong, G. Q., Chu, J., & Ding, X. M. (2015). Grouted gravel column-supported highway embankment over soft clay: case study. Canadian Geotechnical Journal, 52(11), 1725–1733. https://doi.org/https://doi.org/10.1139/cgj-2014-0284
- Liu, E., Nie, Q., & Zhang, J. (2013). A new strength criterion for structured soils. Journal of Rock Mechanics and Geotechnical Engineering, 5(2), 156–161. https://doi.org/https://doi.org/10.1016/j.jrmge.2013.03.002
- Lo Presti, D. C. F., Jamiolkowski, M., Pallara, O., Cavallaro, A., & Pedroni, S. (1997). Shear modulus and damping of soils. Géotechnique, 47(3), 603–617. https://doi.org/https://doi.org/10.1680/geot.1997.47.3.603
- Lo, S. R., & Wardani, S. P. R. (2002). Strength and dilatancy of a silt stabilized by a cement and fly ash mixture. Canadian Geotechnical Journal, 39(1), 77–89. https://doi.org/https://doi.org/10.1139/t01-062
- Maher, M. H., Ro, K. S., & Welsh, J. P. (1994). Cyclic undrained behavior and liquefaction potential of sand treated with chemical grouts and microfine cement (MC-500). Geotechnical Testing Journal, 17(2), 159–170. https://doi.org/https://doi.org/10.1520/GTJ10088J
- Montoya, B. M., Dejong, J. T., & Boulanger, R. W. (2013). Dynamic response of liquefiable sand improved by microbial-induced calcite precipitation. Géotechnique, 63(4), 302–312. https://doi.org/https://doi.org/10.1680/geot.SIP13.P.019
- Munfakh, G. A. (1997). Ground improvement engineering-the state of the US practice: part 1. Proceedings of the Institution of Civil Engineers - Ground Improvement, 1(4), 193–214. https://doi.org/https://doi.org/10.1680/gi.1997.010402
- Nicholson, P. G., Seed, R. B., & Anwar, H. (1989). Measurement and elimination of membrane compliance effects in undrained triaxial testing (Report No. UCB/EERC-89/10). Earthquake Engineering Research Center, University of California, Berkeley.
- Ozcelik, M. (2014). Foundation consolidation grouting applications in Deriner Dam and hydroelectric power plant (Artvin, Turkey). Bulletin of Engineering Geology and the Environment, 73(2), 493–498. https://doi.org/https://doi.org/10.1007/s10064-013-0547-7.
- Park, S. S. (2010). Effect of wetting on unconfined compressive strength of cemented sands. Journal of Geotechnical and Geoenvironmental Engineering, 136(12), 1713–1720. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0000399
- Pestana, J. M., & Salvati, L. A. (2006). Small-strain behavior of granular soils. I: model for cemented and uncemented sands and gravels. Journal of Geotechnical and Geoenvironmental Engineering, 132(8), 1071–1081. https://doi.org/https://doi.org/10.061/(ASCE)1090-0241(2006)132:8(1071)
- Porcino, D., Marciano, V., & Granata, R. (2012). Static and dynamic properties of a lightly cemented silicate-grouted sand. Canadian Geotechnical Journal, 49(10), 1117–1133. https://doi.org/https://doi.org/10.1139/t2012-069
- Ramana, K. V., & Raju, V. S. (1982). Membrane penetration in triaxial tests. Journal of Geotechnical Engineering, 108(GT2), 305–310.
- Reddy, K. R., & Saxena, S. K. (1992). Liquefaction resistance of cemented sands under multidirectional cyclic loading. Canadian Geotechnical Journal, 29(6), 989–993. https://doi.org/https://doi.org/10.1139/t92-108
- Reddy, K. R., & Saxena, S. K. (1993). Effects of cementation on stress-strain and strength characteristics of sands. Soils and Foundations, 33(4), 121–134. https://doi.org/https://doi.org/10.3208/sandf1972.33.4_121
- Rotta, G. V., Consoli, N. C., Prietto, P. D. M., Coop, M. R., & Graham, J. (2003). Isotropic yielding in an artificially cemented soil cured under stress. Géotechnique, 53(5), 493–501. https://doi.org/https://doi.org/10.1680/geot.2003.53.5.493
- Saxena, S. K., Avramidis, A. S., & Reddy, K. R. (1988). Dynamic moduli and damping ratios for cemented sands at low strains. Canadian Geotechnical Journal, 25(2), 353–368. https://doi.org/https://doi.org/10.1139/t88-036
- Schwarz, L. G., & Krizek, R. J. (1994). Effect of preparation technique on permeability and strength of cement-grouted sand. Geotechnical Testing Journal, 17(4), 434–443. https://doi.org/https://doi.org/10.1520/GTJ10304J
- Sharma, S. S., & Fahey, M. (2004). Deformation characteristics of two cemented calcareous soils. Canadian Geotechnical Journal, 41(6), 1139–1151. https://doi.org/https://doi.org/10.1139/t04-066
- Toll, D. G., & Ali Rahman, Z. (2017). Critical state shear strength of an unsaturated artificially cemented sand. Géotechnique, 67(3), 208–215. https://doi.org/https://doi.org/10.1680/jgeot.15.P.042
- Trhlikova, J., Masin, D., & Bohac, J. (2012). Small-strain behaviour of cemented soils. Géotechnique, 62(10), 943–947. https://doi.org/https://doi.org/10.680/geot.9.P.
- Truong, Q. H., Lee, C., Kim, Y. U., & Lee, J. S. (2012). Small strain stiffness of salt-cemented granular media under low confinement. Géotechnique, 62(10), 949–953. https://doi.org/https://doi.org/10.1680/geot.10.T.004
- USACE (US Army Corps of Engineers). (2004). General design and construction considerations for earth and rock-fill dams (Engineering Manual, EM 1110-2-2300).
- Vaughan, P. R., Maccarini, M., & Mokhtar, S. M. (1988). Indexing the engineering properties of residual soils. Quarterly Journal of Engineering Geology and Hydrogeology, 21(1), 69–84. https://doi.org/https://doi.org/10.1144/GSL.QJEG.1988.021.01.05
- Wang, Y. H., & Leung, S. C. (2008a). A particulate-scale investigation of cemented sand behavior. Canadian Geotechnical Journal, 45(1), 29–44. https://doi.org/https://doi.org/10.1139/T07-070
- Wang, Y. H., & Leung, S. C. (2008b). Characterization of cemented sand by experimental and numerical investigations. Journal of Geotechnical and Geoenvironmental Engineering, 134(7), 992–1004. https://doi.org/https://doi.org/10.061/(ASCE)1090-0241(2008)134:7(992)
- Welsh, J. P. (1998). State of the art of grouting in North America. Proceedings of the Institution of Civil Engineers - Ground Improvement, 2(1), 11–15. https://doi.org/https://doi.org/10.1680/gi.1998.020103
- Xiao, Y., & Liu, H. (2017). Elastoplastic constitutive model for rockfill materials considering particle breakage. International Journal of Geomechanics, 17(1), 04016041. https://doi.org/https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681
- Xiao, P., Liu, H., Stuedlein, A. W., Evans, T. M., & Xiao, Y. (2019). Effect of relative density and bio-cementation on the cyclic response of calcareous sand. Canadian Geotechnical Journal, 56(12), 1849–1862. https://doi.org/https://doi.org/10.1139/cgj-2018-0573
- Xiao, Y., Stuedlein, A. M., Chen, Q., Liu, H., & Liu, P. (2018). Stress-strain-strength response and ductility of gravels improved by polyurethane foam adhesive. Journal of Geotechnical and Geoenvironmental Engineering, 144(2), 04017108. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0001812
- Xiao, Y., Stuedlein, A. W., Ran, J., Evans, T. M., Cheng, L., Liu, H., van Paassen, L. A., & Chu, J. (2019). Effect of particle shape on the strength and stiffness of biocemented glass beads. Journal of Geotechnical and Geoenvironmental Engineering, 145(11), 06019016. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0002165
- Yang, L., & Wood, R. D. (2015). Shear stiffness modeling of cemented clay. Canadian Geotechnical Journal, 52(2), 156–166. https://doi.org/https://doi.org/10.1139/cgj-2012-0377
- Yasuda, N., Ohta, N., & Nakamura, A. (1996). Dynamic deformation characteristics of undisturbed riverbed gravels. Canadian Geotechnical Journal, 33(2), 237–247. https://doi.org/https://doi.org/10.1139/t96-003