References
- Al-Sanad, H. A., Ismael, N. F., & Brenner, R. P. (1993). Settlement of circular and ring plates in very dense calcareous sands. Journal of Geotechnical Engineering, 119(4), 622–638. https://doi.org/https://doi.org/10.1061/(ASCE)0733-9410(1993)119:4(622)
- Benmebarek, S., Remadna, M. S., Benmebarek, N., & Belounar, L. (2012). Numerical evaluation of bearing capacity factor Nγ of ring footings. Computers and Geotechnics, 44, 132–138. https://doi.org/https://doi.org/10.1016/j.compgeo.2012.04.004
- Boushehrian, J. H., & Hataf, N. (2003). Experimental and numerical investigation of the bearing capacity of model circular and ring footings on reinforced sand. Geotextiles and Geomembranes, 21(4), 241–256. https://doi.org/https://doi.org/10.1016/S0266-1144(03)00029-3
- Bowles, J. E. (1977). Foundation analysis and design. McGraw-Hill.
- Choobbasti, A. J., Hesami, S. A. S. F., Najafi, A., Pirzadeh, S., Farrokhzad, F., & Zahmatkesh, A. (2010). Numerical evaluation of bearing capacity and settlement of ring footing; case study of Kazeroon cooling towers. International Journal of Research and Reviews in Applied Sciences, 4(2), 263–271.
- Drescher, A., & Detournay, E. (1993). Limit load in translational failure mechanisms for associative and non-associative materials. Géotechnique, 43(3), 443–456. https://doi.org/https://doi.org/10.1680/geot.1993.43.3.443
- El Sawwaf, M., & Nazir, A. (2012). Behavior of eccentrically loaded small-scale ring footings resting on reinforced layered soil. Journal of Geotechnical and Geoenvironmental Engineering, 138(3), 376–384. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0000593
- Farah, C. A. (2004). Ultimate bearing capacity of shallow foundations on layered soils [M.Sc. thesis]. Civil and Environmental Engineering, Concordia University.
- Hanna, A. M. (1981). Foundations on strong sand overlying weak sand. Journal of Geotechnical Engineering Division, 107(7), 915–927.
- Hanna, A. M. (1982). Bearing capacity of foundations on a weak sand layer overlying a strong deposit. Canadian Geotechnical Journal, 19(3), 392–396. https://doi.org/https://doi.org/10.1139/t82-043
- Hataf, N., & Razavi, M. R. (2003). Behavior of ring footing on sand. Iranian Journal of Science and Technology, Transaction B, 27, 47–56.
- Hosseininia, E. S. (2015). Bearing capacity factors of ring footings. Iranian Journal of Science and Technology, Transaction Civil Engineering, 40(2), 121–132. https://doi.org/https://doi.org/10.1007/s40996-016-0003-6.
- Karaulov, A. M. (2005). Static solution of the liming-pressure problem for ring foundations on soil beds. Soil Mechanics and Foundation Engineering, 42(6), 189–194. https://doi.org/https://doi.org/10.1007/s11204-006-0007-5
- Karaulov, A. M. (2006). Experimental and theoretical research on the bearing capacity of ring foundation beds. Soil Mechanics and Foundation Engineering, 43(2), 37–40. https://doi.org/https://doi.org/10.1007/s11204-006-0021-7
- Keshavarz, A., & Kumar, J. (2017). Bearing capacity computation for a ring foundation using the stress characteristics method. Computers and Geotechnics, 89, 33–42. https://doi.org/https://doi.org/10.1016/j.compgeo.2017.04.006
- Khatri, V. N., Kumar, J., & Akhtar, S. (2017). Bearing capacity of foundations with inclusion of dense sand layer over loose sand strata. International Journal of Geomechanics, 17(10), 6017018. https://doi.org/https://doi.org/10.1061/(ASCE)GM.1943-5622.0000980
- Krabbenhøft, K., Lyamin, A. V., & Sloan, S. W. (2007). Formulation and solution of some plasticity problems as conic programs. International Journal of Solids and Structures, 44(5), 1533–1549. https://doi.org/https://doi.org/10.1016/j.ijsolstr.2006.06.036
- Krabbenhøft, K., Lyamin, A. V., & Sloan, S. W. (2008). Three-dimensional Mohr-Coulomb limit analysis using semidefinite programming. Communications in Numerical Methods in Engineering, 24(11), 1107–1119. https://doi.org/https://doi.org/10.1002/cnm.1018
- Kumar, J., & Chakraborty, M. (2015). Bearing capacity factors for ring foundations. Journal of Geotechnical and Geoenvironmental Engineering, 141(10), 6015007. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0001345
- Kumar, J., & Ghosh, P. (2005). Bearing capacity factor Nγ for ring footings using the method of characteristics. Canadian Geotechnical Journal, 42(5), 1474–1484. https://doi.org/https://doi.org/10.1139/t05-051
- Kumar, J., & Khatri, V. N. (2008). Effect of footing roughness on lower bound Nγ values. International Journal of Geomechanics ASCE, 8(3), 176–187.
- Lee, J. K., Jeong, S., & Lee, S. (2016). Undrained bearing capacity factors for ring footings in heterogeneous soil. Computers and Geotechnics, 75, 103–111. https://doi.org/https://doi.org/10.1016/j.compgeo.2016.01.021
- Lyamin, A. V., & Sloan, S. W. (2002a). Lower bound limit analysis using non-linear programming. International Journal for Numerical Methods in Engineering, 55(5), 573–611. https://doi.org/https://doi.org/10.1002/nme.511
- Lyamin, A. V., & Sloan, S. W. (2002b). Upper bound limit analysis using non-linear programming. International Journal for Numerical and Analytical Methods in Geomechanics, 26(2), 181–216. https://doi.org/https://doi.org/10.1002/nag.198
- Makrodimopoulos, A., & Martin, C. M. (2006). Lower bound limit analysis of cohesive frictional materials using second-order cone programming. International Journal for Numerical Methods in Engineering, 66(4), 604–634. https://doi.org/https://doi.org/10.1002/nme.1567
- Makrodimopoulos, A., & Martin, C. M. (2007). Upper bound limit analysis using simplex strain elements and second-order cone programming. International Journal for Numerical and Analytical Methods in Geomechanics, 31(6), 835–865. https://doi.org/https://doi.org/10.1002/nag.567
- Meyerhof, G. G., & Hanna, A. M. (1978). Ultimate bearing capacity of foundations on layered soils under inclined load. Canadian Geotechnical Journal, 15(4), 565–572. https://doi.org/https://doi.org/10.1139/t78-060
- Mohapatra, D., & Kumar, J. (2018). Upper-bound finite-element limit analysis of axisymmetric problems for Mohr-Coulomb materials using semidefinite programming. Journal of Engineering Mechanics, 144(7), 4018046. https://doi.org/https://doi.org/10.1061/(ASCE)EM.1943-7889.0001472
- Naderi, E., & Hataf, N. (2014). Model testing and numerical investigation of interference effect of closely spaced ring and circular footings on reinforced sand. Geotextiles and Geomembranes, 42(3), 191–200. https://doi.org/https://doi.org/10.1016/j.geotexmem.2013.12.010
- Ohri, M. L., Purhit, D. G. M., & Dubey, M. L. (1997). Behavior of ring footings on dune sand overlaying dense sand. Pres. International Conference of Civil Engineers, Tehran, Iran.
- OptumG2. (2017). Optum computational engineering. OptumG2.
- Pastor, J., & Turgeman, S. (1982). Limit analysis in axisymmetrical problems: Numerical determination of complete statical solutions. International Journal of Mechanical Sciences, 24(2), 95–117. https://doi.org/https://doi.org/10.1016/0020-7403(82)90041-8
- Saha, M. C. (1978). Ultimate bearing capacity of ring footings on sand [M. Eng. thesis]. University of Roorkee.
- Saran, S., Bhandari, N. M., & Al-Smadi, M. M. A. (2003). Analysis of eccentrically obliquely loaded ring footings on sand. Indian Geotechnical Journal, 33(4), 422–446.
- Sharma, V., & Kumar, A. (2017). Influence of relative density of soil on performance of fiber-reinforced soil foundations. Geotextiles and Geomembranes, 45(5), 499–507. https://doi.org/https://doi.org/10.1016/j.geotexmem.2017.06.004
- Tassoulas, J. L., & Kausel, E. (1984). On the dynamic stiffness of circular ring footings on an elastic stratum. International Journal for Numerical and Analytical Methods in Geomechanics, 8(5), 411–426. https://doi.org/https://doi.org/10.1002/nag.1610080502
- Zhao, L., & Wang, J. H. (2008). Vertical bearing capacity for ring footings. Computer and Geotechnics, 35(2), 292–304. https://doi.org/https://doi.org/10.1016/j.compgeo.2007.05.005