References
- Abdul Khalil, H. P. S., Yusra, A. F. I., Bhat, A. H., & Jawaid, M. (2010). Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber. Industrial Crops and Products, 31(1), 113–121. https://doi.org/https://doi.org/10.1016/j.indcrop.2009.09.008
- Ali, H., Khan, E., & Sajad, M. A. (2013). Phytoremediation of heavy metals-concepts and applications. Chemosphere, 91(7), 869–881. https://doi.org/https://doi.org/10.1016/j.chemosphere.2013.01.075.
- Al-Kindi, G. (2019). Evaluation the solidification/stabilization of heavy metals by portland cement. Journal of Ecological Engineering, 20(3), 91–100. https://doi.org/https://doi.org/10.12911/22998993/99739
- Arbaoui, S., Evlard, A., Mhamdi, M. E. W., Campanella, B., Paul, R., & Bettaieb, T. (2013). Potential of kenaf (Hibiscus cannabinus L.) and corn (Zea mays L.) for phytoremediation of dredging sludge contaminated by trace metals. Biodegradation, 24(4), 563–567. https://doi.org/https://doi.org/10.1007/s10532-013-9626-5.
- Asasutjarit, C., Hirunlabh, J., Khedari, J., Charoenvai, S., Zeghmati, B., & Shin, U. C. (2007). Development of coconut coir-based lightweight cement board. Construction and Building Materials, 21(2), 277–288. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2005.08.028
- Ashraf, S., Ali, Q., Zahir, Z. A., Ashraf, S., & Asghar, H. N. (2019). Phytoremediation: Environmentally sustainable way for reclamation of heavy metal polluted soils. Ecotoxicology and Environmental Safety, 174, 714–727. https://doi.org/https://doi.org/10.1016/j.ecoenv.2019.02.068.
- Ashteyat, A. M., Al Rjoub, Y. S., Murad, Y., & Asaad, S. (2019). Mechanical and durability behaviour of roller-compacted concrete containing white cement by pass dust and polypropylene fibre. European Journal of Environmental and Civil Engineering, 1–18. https://doi.org/https://doi.org/10.1080/19648189.2019
- ASTM C348. (2008). Standard test method for flexural strength of hydraulic-cement mortars. ASTM International.
- ASTM C349-14. (2014). Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). ASTM International.
- ASTM C642-06. (2013). Standard test method for density, absorption, and voids inhardened concrete (Vol. 04.2). American Society for Testing of Materials, Annual Book of ASTM Standards.
- Banthia, N., & Sappakittipakorn, M. (2007). Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement and Concrete Research, 37(9), 1366–1372. https://doi.org/https://doi.org/10.1016/j.cemconres.2007.05.005
- Benmansour, N., Agoudjil, B., Gherabli, A., Kareche, A., & Boudenne, A. (2014). Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building. Energy and Buildings, 81, 98–104. https://doi.org/https://doi.org/10.1016/j.enbuild.2014.05.032
- Bouasker, M., Belayachi, N., Hoxha, D., & Al-Mukhtar, M. (2014). Physical characterization of natural straw fibers as aggregates for construction materials applications. Materials (Basel, Switzerland)), 7(4), 3034–3048. https://doi.org/https://doi.org/10.3390/ma7043034.
- Chaipanich, A., & Nochaiya, T. (2010). Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes. Journal of Thermal Analysis and Calorimetry, 99(2), 487–493. https://doi.org/https://doi.org/10.1007/s10973-009-0403-y
- Dell'Orso, M., Mangialardi, T., Paolini, A. E., & Piga, L. (2012). Evaluation of the leachability of heavy metals from cement-based materials. Journal of Hazardous Materials, 227-228, 1–8. https://doi.org/https://doi.org/10.1016/j.jhazmat.2012.04.017
- Dias, D. P., & Thaumaturgo, C. (2005). Fracture toughness of geopolymeric concretes reinforced with basalt fibers. Cement and Concrete Composites, 27(1), 49–54. https://doi.org/https://doi.org/10.1016/j.cemconcomp.2004.02.044
- Diez, J. M., Madrid, J., & Macias, A. (1997). Characterization of cement-stabilized Cd wastes. Cement and Concrete Research, 27(3), 337–343. https://doi.org/https://doi.org/10.1016/S0008-8846(97)00017-3
- Elsaid, A., Dawood, M., Seracino, R., & Bobko, C. (2011). Mechanical properties of kenaf fiber reinforced concrete. Construction and Building Materials, 25(4), 1991–2001. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.11.052
- GB 8978-1996. (1996). Integrated wastewater discharge standard. China Standard Press.
- Giergiczny, Z., & Krol, A. (2008). Immobilization of heavy metals (Pb, Cu, Cr, Zn, Cd, Mn) in the mineral additions containing concrete composites. Journal of Hazardous Materials, 160(2-3), 247–255. https://doi.org/https://doi.org/10.1016/j.jhazmat.2008.03.007.
- Gougar, M. L. D., Scheetz, B. E., & Roy, D. M. (1996). Ettringite and C-S-H Portland cement phases for waste ion immobilization: A review. Waste Management, 16(4), 295–303. https://doi.org/https://doi.org/10.1016/S0956-053X(96)00072-4
- Haba, B., Agoudjil, B., Boudenne, A., & Benzarti, K. (2017). Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete. Construction and Building Materials, 154, 963–971. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.08.025
- Ho, W. M., Ang, L. H., & Lee, D. K. (2008). Assessment of Pb uptake, translocation and immobilization in kenaf (Hibiscus cannabinus L.) for phytoremediation of sand tailings. Journal of Environmental Sciences, 20(11), 1341–1347. https://doi.org/https://doi.org/10.1016/S1001-0742(08)62231-7
- Iyer, P., Kenno, S. Y., & Das, S. (2015). Mechanical properties of fiber-reinforced concrete made with basalt filament fibers. Journal of Materials in Civil Engineering, 27(11), 04015015. https://doi.org/https://doi.org/10.1061/(ASCE)MT.1943-5533.0001272
- Jadia, C. D., & Fulekar, M. (2009). Phytoremediation of heavy metals: Recent techniques. African Journal of Biotechnology, 8(6), 921–928.
- Jing, Y. D., He, Z. L., & Yang, X. E. (2007). Role of soil rhizobacteria in phytoremediation of heavy metal contaminated soils. Journal of Zhejiang University. Science. B, 8(3), 192–207. https://doi.org/https://doi.org/10.1631/jzus.2007.B0192.
- Koutenaei, R. Y., Choobbasti, A. J., & Kutanaei, S. S. (2019). Triaxial behaviour of a cemented sand reinforced with Kenaf fibres. European Journal of Environmental and Civil Engineering, 1–19. https://doi.org/https://doi.org/10.1080/19648189.2019.1574607
- Lima, P. R. L., Barros, J. A. O., Santos, D. J., Fontes, C. M., Lima, J. M. F., & Toledo Filho, R. (2017). Experimental and numerical analysis of short sisal fiber-cement composites produced with recycled matrix. European Journal of Environmental and Civil Engineering, 23(1), 70–84. https://doi.org/https://doi.org/10.1080/19648189.2016.1271357
- Li, Z., Ma, Z., van der Kuijp, T. J., Yuan, Z., & Huang, L. (2014). A review of soil heavy metal pollution from mines in China: Pollution and health risk assessment. The Science of the Total Environment, 468-469, 843–853. https://doi.org/https://doi.org/10.1016/j.scitotenv.2013.08.090
- Liu, X., Song, Q., Tang, Y., Li, W., Xu, J., Wu, J., Wang, F., & Brookes, P. C. (2013). Human health risk assessment of heavy metals in soil-vegetable system: A multi-medium analysis. The Science of the Total Environment, 463–464, 530–540. https://doi.org/https://doi.org/10.1016/j.scitotenv.2013.06.064
- Li, Z., Wang, X., & Wang, L. (2006). Properties of hemp fibre reinforced concrete composites. Composites Part A: Applied Science and Manufacturing, 37(3), 497–505. https://doi.org/https://doi.org/10.1016/j.compositesa.2005.01.032
- Li, C., Zhou, K., Qin, W., Tian, C., Qi, M., Yan, X., & Han, W. (2019). A review on heavy metals contamination in soil: Effects, sources, and remediation techniques. Soil and Sediment Contamination: An International Journal, 28(4), 380–394. https://doi.org/https://doi.org/10.1080/15320383.2019.1592108
- Lu, L., Xiang, C., He, Y., Wang, F., & Hu, S. (2017). Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes. Construction and Building Materials, 152, 923–932. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.07.026
- Mahzabin, M. S., Hock, L. J., Hossain, M. S., & Kang, L. S. (2018). The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite. Construction and Building Materials, 178, 518–528. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.05.169
- Nguyen, T.-T., Picandet, V., Amziane, S., & Baley, C. (2011). Influence of compactness and hemp hurd characteristics on the mechanical properties of lime and hemp concrete. European Journal of Environmental and Civil Engineering, 13(9), 1039–1050. https://doi.org/https://doi.org/10.1080/19648189.2009.9693171
- Nguyen, T. H., Toumi, A., Turatsinze, A., & Tazi, F. (2011). Restrained shrinkage cracking in steel fibre reinforced and rubberised cement-based mortars. Materials and Structures, 45(6), 899–904. https://doi.org/https://doi.org/10.1617/s11527-011-9806-x
- Niu, M., Li, G., Wang, Y., Li, Q., Han, L., & Song, Z. (2018). Comparative study of immobilization and mechanical properties of sulfoaluminate cement and ordinary Portland cement with different heavy metals. Construction and Building Materials, 193, 332–343. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.10.206
- Petkova, V., Stoyanov, V., & Pelovski, Y. (2012). TG–DTG–DTA in studying white self-compacting cement mortars[J]. Journal of Thermal Analysis and Calorimetry, 109(2), 797–806. https://doi.org/https://doi.org/10.1007/s10973-012-2447-7
- Pomiès, M. P., Lequeux, N., & Boch, P. (2001). Speciation of cadmium in cement: Part I. Cd2. + uptake by CSH. Cement and Concrete Research, 31(4), 563–569. https://doi.org/https://doi.org/10.1016/S0008-8846(00)00480-4
- Saad, M. J., & Kamal, I. (2012). Mechanical and physical properties of low density kenaf core particleboards bonded with different resins. Journal of Science and Technology, 4(1), 17–32.
- Symington, M. C., Banks, W. M., West, O. D., & Pethrick, R. (2009). Tensile testing of cellulose based natural fibers for structural composite applications. Journal of Composite Materials, 43(9), 1083–1108. https://doi.org/https://doi.org/10.1177/0021998308097740
- Wei, B., & Yang, L. (2010). A review of heavy metal contaminations in urban soils, urban road dusts and agricultural soils from China. Microchemical Journal, 94(2), 99–107. https://doi.org/https://doi.org/10.1016/j.microc.2009.09.014
- Wu, F., Liu, C., Sun, W., Yuan, J. M., & Lian, W., Z. (2019). Effect of peach shell as lightweight aggregate on mechanics and creep properties of concrete. European Journal of Environmental and Civil Engineering, 1–19. https://doi.org/https://doi.org/10.1080/19648189.2018.1515667
- Xu, J., Sugawara, R., Widyorini, R., Han, G., & Kawai, S. (2004). Manufacture and properties of low-density binderless particleboard from kenaf core. Journal of Wood Science, 50(1), 62–67. https://doi.org/https://doi.org/10.1007/s10086-003-0522-1
- Xue, Y., Du, Y., Elder, S., Sham, D., Horstemeyer, M., & Zhang, J. (2007). Statistical evaluation of tensile properties of kenaf fibers and composites. Department of Energy (DOE), Light-weighting materials. 431–439.
- Yang, J., You, S., & Zheng, J. (2019). Review in strengthening technology for phytoremediation of soil contaminated by heavy metals. IOP Conference Series: Earth and Environmental Science, 242(5), 052003. IOP Publishing. https://doi.org/https://doi.org/10.1088/1755-1315/242/5/052003
- Yew, M. K., Yew, M. C., Beh, J. H., Saw, L. H., Lee, F. W., & Ng, T. C. (2018). Influence of high-performance polypropylene fibre and heat-treated dura oil palm shell on durability properties of lightweight concrete. European Journal of Environmental and Civil Engineering, 1–20. https://doi.org/https://doi.org/10.1080/19648189.2018.1509022
- Yu, Q., Nagataki, S., Lin, J., Saeki, T., & Hisada, M. (2005). The leachability of heavy metals in hardened fly ash cement and cement-solidified fly ash. Cement and Concrete Research, 35(6), 1056–1063. https://doi.org/https://doi.org/10.1016/j.cemconres.2004.03.031
- Zhao, F. J., Ma, Y., Zhu, Y. G., Tang, Z., & McGrath, S. P. (2015). Soil contamination in China: Current status and mitigation strategies. Environmental Science & Technology, 49(2), 750–759. https://doi.org/https://doi.org/10.1021/es5047099.