Nonlinear structural performance and seismic fragility of corroded reinforced concrete structures: modelling guidelines

References

• ACI Committee 318. (2014). Building code requirements for structural concrete (ACI 318-14) and commentary on building code requirements for structural concrete (ACI 318R-14). American Concrete Institute.
   Google Scholar
• Afsar Dizaj, E., & Kashani, M. M. (2020). Numerical investigation of the influence of cross-sectional shape and corrosion damage on failure mechanisms of RC bridge piers under earthquake loading. Bulletin of Earthquake Engineering, 18(10), 4939–4961. https://doi.org/10.1007/s10518-020-00883-3
   Web of Science ®Google Scholar
• American Society of Civil Engineers (ASCE). (2010). Minimum design loads for buildings and other structures. ASCE 7–10.
   Google Scholar
• Alipour, A., Shafei, B., & Shinozuka, M. (2011). Performance evaluation of deteriorating highway bridges located in high seismic areas. Journal of Bridge Engineering, 16(5), 597–611. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000197
   Web of Science ®Google Scholar
• Anam, I., & Shoma, Z. N. (2002). Nonlinear properties of reinforced concrete structures. The University of Asia Pacific.
   Google Scholar
• Apostolopoulos, C. A., Papadopoulos, M. P., & Pantelakis, S. G. (2006). Tensile behavior of corroded reinforcing steel bars BSt 500s. Construction and Building Materials, 20(9), 782–789. https://doi.org/10.1016/j.conbuildmat.2005.01.065
   Web of Science ®Google Scholar
• Apostolopoulos, C. A. (2007). Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue. Construction and Building Materials, 21(7), 1447–1456. https://doi.org/10.1016/j.conbuildmat.2006.07.008
   Web of Science ®Google Scholar
• Aquino, W., & Hawkins, N. M. (2007). Seismic retrofitting of corroded reinforced concrete columns using carbon composites. ACI Structural Journal, 104(3), 348–356.
   Web of Science ®Google Scholar
• Balan, T. A., Filippou, F. C., & Popov, E. P. (1998). Hysteretic model of ordinary and high-strength reinforcing steel. Journal of Structural Engineering, 124(3), 288–297. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(288)
   Web of Science ®Google Scholar
• Belletti, B., Stocchi, A., Scolari, M., & Vecchi, F. (2017). Validation of the PARC_CL 2.0 crack model for the assessment of the nonlinear behaviour of RC structures subjected to seismic action. smart 2013 Shaking Table Test Simulation. Engineering Structures, 150, 759–773. https://doi.org/10.1016/j.engstruct.2017.07.058
   Web of Science ®Google Scholar
• Belletti, B., & Vecchi, F. (2018). Implementation of steel constitutive model including buckling in ARC_CL 2.1 Crack Model. 5th International FB Congress, Australia.
   Google Scholar
• Berry, M. P., & Eberhard, M. O. (2006). Performance modelling strategies for modern reinforced concrete bridge columns. PEER research report. Univ. of Calif, 67(11) Berkeley.
   Google Scholar
• Cairns, J., Plizzari, G. A., Du, Y. G., Law, D. W., & Chiara, F. (2005). Mechanical properties of corrosion-damaged reinforcement. ACI Materials Journal, 102 (4), 256–264.
   Web of Science ®Google Scholar
• California Department of Transportation (Caltrans). (2010). Seismic design criteria (SDC), version 1.6., CA.
   Google Scholar
• Coleman, J., & Spacone, E. (2001). Localisation issues in force-based frame elements. Journal of Structural Engineering, 127(11), 1257–1265. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1257)
   Web of Science ®Google Scholar
• Coronelli, D., & Gambarova, P. (2004). Structural assessment of corroded reinforced concrete beams: Modelling guidelines. Journal of Structural Engineering, 130 (8), 1214–1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
   Web of Science ®Google Scholar
• Darmawna, M. S. (2010). Pitting corrosion model for reinforced concrete structures in a chloride environment. Magazine of Concrete Research, 62 (2), 91–101.
   Web of Science ®Google Scholar
• Dhakal, R., & Maekawa, K. (2002). Modeling for postyield buckling of reinforcement. Journal of Structural Engineering, 128(9), 1139–1147. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139)
   Web of Science ®Google Scholar
• Di Carlo, F., Meda, A., & Rinaldi, Z. (2017). Numerical evaluation of the corrosion influence on the cyclic behaviour of RC columns. Engineering Structures, 153, 264–278. https://doi.org/10.1016/j.engstruct.2017.10.020
   Web of Science ®Google Scholar
• Dizaj, E. A., Madandoust, R., & Kashani, M. M. (2018a). Exploring the impact of chloride-induced corrosion on seismic damage limit states and residual capacity of reinforced concrete structures. Structure and Infrastructure Engineering, 14(6), 714–729. https://doi.org/10.1080/15732479.2017.1359631
   Web of Science ®Google Scholar
• Dizaj, E. A., Madandoust, R., & Kashani, M. M. (2018b). Probabilistic seismic vulnerability analysis of corroded reinforced concrete frames including spatial variability of pitting corrosion. Soil Dynamics and Earthquake Engineering, 114, 97–112. https://doi.org/10.1016/j.soildyn.2018.07.013
   Web of Science ®Google Scholar
• Du, Y. G., Clark, L. A., & Chan, A. H. C. (2005a). Residual capacity of corroded reinforcing bars. Magazine of Concrete Research, 57 (3), 135–147. https://doi.org/10.1680/macr.2005.57.3.135
   Web of Science ®Google Scholar
• Du, Y. G., Clark, L. A., & Chan, A. H. C. (2005b). Effect of corrosion on ductility of reinforcing bars. Magazine of Concrete Research, 57 (7), 407–419. https://doi.org/10.1680/macr.2005.57.7.407
   Web of Science ®Google Scholar
• FEMA P695: Quantification of Building Seismic Performance Factors. (2009). Federal Emergency Management Agency.
   Google Scholar
• Fernandez, I., Bairan, J. M., & Mari, A. R. (2015). Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ–ε behaviour. Construction and Building Materials, 101, 772–783. https://doi.org/10.1016/j.conbuildmat.2015.10.139
   Web of Science ®Google Scholar
• Ge, X., Dietz, M. S., Alexander, N. A., & Kashani, M. M. (2020). Nonlinear dynamic behaviour of severely corroded reinforced concrete columns: Shaking table study. Bulletin of Earthquake Engineering, 18(4), 1417–1443. https://doi.org/10.1007/s10518-019-00749-3
   Web of Science ®Google Scholar
• Ghosh, J., & Padgett, J. E. (2010). Aging considerations in the development of time-dependent seismic fragility curves. Journal of Structural Engineering, 136(12), 1497–1511. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000260
   Web of Science ®Google Scholar
• Guo, A., Li, H., Ba, X., Guan, X., & Li, H. (2015a). Experimental investigation on the cyclic performance of reinforced concrete piers with chloride-induced corrosion in marine environment. Engineering Structures, 105, 1–11. https://doi.org/10.1016/j.engstruct.2015.09.031
   Web of Science ®Google Scholar
• Guo, A., Yuan, W., Lan, C., Guan, X., & Li, H. (2015b). Time-dependent seismic demand and fragility of deteriorating bridges for their residual service life. Bulletin of Earthquake Engineering, 13(8), 2389–2409. https://doi.org/10.1007/s10518-014-9722-x
   Web of Science ®Google Scholar
• HAZUS-MH MR5. (2010). Earthquake loss estimation methodology. Technical and User’s Manual. Department of Homeland Security. Federal Emergency Management Agency, Mitigation Division.
   Google Scholar
• Jeon, J. S., Lowes, L. N., DesRoches, R., & Brilakis, I. (2015). Fragility curves for non-ductile reinforced concrete frames that exhibit different component response mechanisms. Engineering Structures, 85, 127–143. https://doi.org/10.1016/j.engstruct.2014.12.009
   Web of Science ®Google Scholar
• Kashani, M. M., Barmi, A. K., & Malinova, S. (2015b). Influence of inelastic buckling on low-cycle fatigue degradation of reinforcing bars. Construction and Building Materials, 94, 644–655. https://doi.org/10.1016/j.conbuildmat.2015.07.102
   Web of Science ®Google Scholar
• Kashani, M. M., Crewe, A. J., & Alexander, N. A. (2013a). Nonlinear cyclic response of corrosion-damaged reinforcing bars with the effect of buckling. Construction and Building Materials, 41, 388–400. https://doi.org/10.1016/j.conbuildmat.2012.12.011
   Web of Science ®Google Scholar
• Kashani, M. M., Crewe, A. J., & Alexander, N. A. (2013b). Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosion. Corrosion Science, 73, 208–221. https://doi.org/10.1016/j.corsci.2013.03.037
   Web of Science ®Google Scholar
• Kashani, M. M., Lowes, L. N., Crewe, A. J., & Alexander, N. A. (2015a). Phenomenological hysteretic model for corroded reinforcing bars including inelastic buckling and low-cycle fatigue degradation. Computers and Structures, 156, 58–71. https://doi.org/10.1016/j.compstruc.2015.04.005
   Google Scholar
• Kashani, M. M., Lowes, L. N., Crewe, A. J., & Alexander, N. A. (2016). Nonlinear fibre element modelling of RC bridge piers considering inelastic buckling of reinforcement. Engineering Structures, 116, 163–177.
   Web of Science ®Google Scholar
• Kashani, M. M., Maddocks, J., & Afsar Dizaj, E. (2019). Residual capacity of corroded reinforced concrete bridge components: A state-of-the-art review. Journal of Bridge Engineering, 24(7), 03119001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001429
   Web of Science ®Google Scholar
• Lehman, D. E., & Moehle, J. P. (2000). Seismic performance of well-confined concrete columns. PEER research report. Univ. of Calif. Berkeley.
   Google Scholar
• Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical stress–strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
   Web of Science ®Google Scholar
• Manson, S. S. (1965). Fatigue: A complex subject – some simple approximations. Experimental Mechanics, 5(4), 193–226. https://doi.org/10.1007/BF02321056
   Google Scholar
• Ma, Y., Che, Y., & Gong, J. (2012). Behaviour of corrosion damaged circular reinforced concrete columns under cyclic loading. Construction and Building Materials, 29, 548–556. https://doi.org/10.1016/j.conbuildmat.2011.11.002
   Web of Science ®Google Scholar
• McKenna, F. (2011). OpenSees: A framework for earthquake engineering simulation. Computing in Science & Engineering, 13(4), 58–66. https://doi.org/10.1109/MCSE.2011.66
   Web of Science ®Google Scholar
• Meda, A., Mostosi, S., Rinaldi, Z., & Riva, P. (2014). Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Engineering Structures, 76, 112–123. https://doi.org/10.1016/j.engstruct.2014.06.043
   Web of Science ®Google Scholar
• Park, R., & Paulay, T. (1990). Use of interlocking spirals for transverse reinforcement in bridge columns, strength and ductility of concrete substructures of bridges. Bulletin, 84 RRU (Road Research Unit).
   Google Scholar
• Priestley, M., & Paulay, T. (1992). Seismic design of reinforced concrete and masonry buildings. John Wiley & Sons, Inc.
   Google Scholar
• Pugh, J. S. (2012). Numerical simulation of walls and seismic design recommendations for walled buildings [Ph.D. thesis].
   Google Scholar
• Rao, A. S., Lepech, M. D., Kiremidjian, A. S., & Sun, X.-Y. (2017). Simplified structural deterioration model for reinforced concrete bridge piers under cyclic loading. Structure and Infrastructure Engineering, 13(1), 55–66. https://doi.org/10.1080/15732479.2016.1198402
   Web of Science ®Google Scholar
• Rodriguez, J., Ortega, L. M., & Casal, J. (1997). Load carrying capacity of concrete structures with corroded reinforcement. Construction and Building Materials, 11(4), 239–248. https://doi.org/10.1016/S0950-0618(97)00043-3
   Web of Science ®Google Scholar
• Scott, B. D., Park, R., & Priestley, M. J. N. (1982). Stress–strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Journal, 79 (1), 13–27.
   Web of Science ®Google Scholar
• Spacone, E., Filippou, F. C., & Taucer, F. F. (1996). Fibre beam-column model for non-linear analysis of R/C frames: Part I. Formulation. Earthquake Engineering & Structural Dynamics, 25(7), 711–725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9
   Web of Science ®Google Scholar
• Stewart, M. G., & Suo, Q. (2009). Extent of spatially variable corrosion damage as an indicator of strength and time-dependent reliability of RC beams. Engineering Structures, 31(1), 198–207. https://doi.org/10.1016/j.engstruct.2008.08.011
   Web of Science ®Google Scholar
• Steward, M. G. (2009). Mechanical behaviour of pitting corrosion of flexural and shear reinforcement and its effect on structural reliability of corroding RC beams. Structural Safety, 31, 19–30.
   Web of Science ®Google Scholar
• Tanaka, H., & Park, R. (1990). Effect of lateral confining reinforcement on the ductile behavior of reinforced concrete column. Department of Civil Engineering.
   Google Scholar
• Vidal, T., Castel, A., & Francois, R. (2004). Analysing crack width to predict corrosion in reinforced concrete. Cement and Concrete Research, 34(1), 165–174. https://doi.org/10.1016/S0008-8846(03)00246-1
   Web of Science ®Google Scholar
• Vu, N. S., Yu, B., & Li, B. (2017). Stress–strain model for confined concrete with corroded transverse reinforcement. Engineering Structures, 151, 472–487. https://doi.org/10.1016/j.engstruct.2017.08.049
   Web of Science ®Google Scholar
• Xu, J., Wu, G., Feng, D., Cotsovos, D. M., & Lu, Y. (2020). Seismic fragility analysis of shear-critical concrete columns considering corrosion induced deterioration effects. Soil Dynamics and Earthquake Engineering, 134, 106165. https://doi.org/10.1016/j.soildyn.2020.106165
   Web of Science ®Google Scholar
• Yao, L., Shi-Ping, Y., & Wen-Jie, C. (2019). Seismic behavior of corrosion-damaged RC columns strengthened with TRC under a chloride environment. Construction and Building Materials, 201, 736–745. https://doi.org/10.1016/j.conbuildmat.2019.01.009
   Web of Science ®Google Scholar
• Zhao, J., & Sritharan, S. (2007). Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures. ACI Structural Journal, 104(2), 133–141.
   Web of Science ®Google Scholar
• Zhou, H., Xu, Y., Peng, Y., Liang, X., Li, D., & Xing, F. (2020). Partially corroded reinforced concrete piers under axial compression and cyclic loading: An experimental study. Engineering Structures, 203, 109880. https://doi.org/10.1016/j.engstruct.2019.109880
   Web of Science ®Google Scholar