Investigations of direct shear characteristics of cementitious mortar reinforced with steel and nylon fibres

References

• Abbadi, A. (2018). Shear contribution of fibre-reinforced lightweight concrete (FRLWC) reinforced with basalt fibre reinforced polymer (BFRP) bars [Master Thesis]. Laval University.
   Google Scholar
• ACI Committee 549. (2013). ACI 549.4R-13: Guide to Design and Construction of Externally Bonded Fabric- Reinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry Structures. American Concrete Institute.
   Google Scholar
• Ali, MAEM., Soliman, AM., & Nehdi, ML. (2017). Hybrid-fibre reinforced engineered cementitious composite under tensile and impact loading. Materials & Design, 117, 139–149. https://doi.org/10.1016/j.matdes.2016.12.047
   Web of Science ®Google Scholar
• Al-Musawi, H., Figueiredo, F. P., Guadagnini, M., & Pilakoutas, K. (2019). Shrinkage properties of plain and recycled steel–fibre-reinforced rapid hardening mortars for repairs. Construction and Building Materials, 197, 369–384. https://doi.org/10.1016/j.conbuildmat.2018.11.099
   Web of Science ®Google Scholar
• Baeza, F. J., Galao, O., Zornoza, E., & Garces, P. (2013). Effect of aspect ratio on strain sensing capacity of carbon fibre reinforced cement composites. Materials & Design, 51, 1085–1094. https://doi.org/10.1016/j.matdes.2013.05.010
   Web of Science ®Google Scholar
• Banthia, N., & Nandakumar, N. (2003). Crack growth resistance of hybrid fibre reinforced cement composites. Cement and Concrete Composites, 25(1), 3–9. https://doi.org/10.1016/S0958-9465(01)00043-9
   Web of Science ®Google Scholar
• Banthia, N., & Sheng, J. (1996). Fracture toughness of micro-fibre reinforced cement composites. Cement and Concrete Composites, 18(4), 251–269. https://doi.org/10.1016/0958-9465(95)00030-5
   Web of Science ®Google Scholar
• Bažant, Z a., nd., & Pfeiffer, PA. (1986). Shear fracture tests of concrete. Materials and Structures, 19(2), 111–121. https://doi.org/10.1007/BF02481755
   Google Scholar
• Beushausen, H., & Alexander, M. G. (2008). Bond strength development between concretes of different ages. Magazine of Concrete Research, 60(1), 65–74. https://doi.org/10.1680/macr.2007.00108
   Web of Science ®Google Scholar
• Coccia, S., Di Carlo, F., & Imperatore, S. (2020). Masonry walls retrofitted with vertical FRP rebars. Buildings, 10(4), 72. ( https://doi.org/10.3390/buildings10040072
   Web of Science ®Google Scholar
• Dawood, E. T., & Ramli, M. (2012). Mechanical properties of high strength flowing concrete with hybrid fibre. Construction and Building Materials, 28(1), 193–200. https://doi.org/10.1016/j.conbuildmat.2011.08.057
   Web of Science ®Google Scholar
• Dinh, N. H., Park, S. H., & Choi, K. K. (2020). Seismic performance of RC columns retrofitted by textile-reinforced mortar jackets. Structure and Infrastructure Engineering, 16(10), 1364–1381. https://doi.org/10.1080/15732479.2019.1708958
   Web of Science ®Google Scholar
• Federation Internationale de la Precontrainte. (1982). Shear at the interface of precast and in situ concrete. Technical report, FIP.
   Google Scholar
• Foraboschi, P. (2015). Analytical model to predict the lifetime of concrete members externally reinforced with FRP. Theoretical and Applied Fracture Mechanics, 75, 137–145. https://doi.org/10.1016/j.tafmec.2014.12.002
   Web of Science ®Google Scholar
• Gao, D., Zhang, L., & Nokken, M. (2017). Mechanical behavior of recycled coarse aggregate concrete reinforced with steel fibres under direct shear. Cement and Concrete Composites, 79, 1–8. https://doi.org/10.1016/j.cemconcomp.2017.01.006
   Web of Science ®Google Scholar
• Garcés, P., Zornoza, E., Alcocel, E. G., Galao, O., & Andión, L. G. (2012). Mechanical properties and corrosion of CAC mortars with carbon fibres. Construction and Building Materials, 34, 91–96. https://doi.org/10.1016/j.conbuildmat.2012.02.020
   Web of Science ®Google Scholar
• Gian, P. L., Carmelo, C., Francesca, C., Stefano, D. S., P. K., Paulo, B. L., Mattia, M., Catherine, C. P., Carlo, P., Andrea., & P Luigia, Z. (2017). Performance assessment of basalt FRCM for retrofit applications on masonry. Composites Part B: Engineering, 128, 1–18.
   Web of Science ®Google Scholar
• Jeon, J., Kim, W., Kim, G., & Jeon, C. (2016). Polyamide fibre reinforced shotcrete for tunnel application. Materials, 9(3), 163. https://doi.org/10.3390/ma9030163
   Web of Science ®Google Scholar
• Jewell, R. B., Mahboub, K. C., Robl, T. L., & Bathke, A. C. (2015). Interfacial bond between reinforcing fibres and calcium sulfoaluminate cements: Fiber pullout characteristics. ACI Material Journal, 112(1), 39–47.
   Web of Science ®Google Scholar
• Jongvivatsakul, P., Attachaiyawuth, A., & Pansuk, W. (2016). A crack-shear slip model of high-strength steel fibre-reinforced concrete based on a push-off test. Construction and Building Materials, 126, 924–935. https://doi.org/10.1016/j.conbuildmat.2016.09.080
   Web of Science ®Google Scholar
• Jongvivatsakul, P., Attachaiyawuth, A., & Pansuk, W. (2016). A crack-shear slip model of high-strength steel fibre-reinforced concrete based on a push-off test. Construction and Building Materials, 126, 924–935.
   Web of Science ®Google Scholar
• Katz, A., & Bentur, A. (1995). Effect of matrix composition on the aging of CFRC. Cement and Concrete Composites, 17(2), 87–97. https://doi.org/10.1016/0958-9465(94)00030-3
   Google Scholar
• Kaufmann, W., Amin, A., Beck, A., & Lee, M. (2019). Shear transfer across cracks in steel fibre reinforced concrete. Engineering Structures, 186, 508–524. https://doi.org/10.1016/j.engstruct.2019.02.027
   Web of Science ®Google Scholar
• Korean Standard Association. (2016). KS F 2421: Standard test method for air content of fresh concrete by the pressure method (Air receiver method).
   Google Scholar
• Korean Standard Association. (2017). KS L 5105: Testing method for compressive strength of hydraulic cement mortars.
   Google Scholar
• Korean Standard Association. (2017). KS L 5111: Flow table for use in tests of hydraulic cement.
   Google Scholar
• Lin, Z., & Li, V. C. (1997). Crack bridging in fibre reinforced cementitious composites with slip-hardening interfaces. Journal of the Mechanics and Physics of Solids, 45(5), 763–787. https://doi.org/10.1016/S0022-5096(96)00095-6
   Web of Science ®Google Scholar
• Lucchini, S. S., Facconi, L., Minelli, F., & Plizzari, G. (2020). Retrofitting unreinforced masonry by steel fibre reinforced mortar coating: uniaxial and diagonal compression tests. Materials and Structures, 53(6), 1–22. https://doi.org/10.1617/s11527-020-01574-w
   Web of Science ®Google Scholar
• Minafò, G., Di Trapani, F., & Amato, G. (2016). Strength and ductility of RC jacketed columns: A simplified analytical method. Engineering Structures, 122, 184–195. https://doi.org/10.1016/j.engstruct.2016.05.013
   Web of Science ®Google Scholar
• Mingli, C., Chaopeng, X., & Junfeng, G. (2019a). Fracture behavior of cement mortar reinforced by hybrid composite fibre consisting of CaCO3 whiskers and PVA-steel hybrid fibres. Composites Part A: Applied Science and Manufacturing., 120, 172–187.
   Web of Science ®Google Scholar
• Mingli, C., Ling, X., & Cong, Z. (2019b). Rheological and mechanical properties of hybrid fibre reinforced cement mortar. Construction and Building Materials, 171, 736–742.
   Web of Science ®Google Scholar
• Ministry of Land, Infrastructure and Transport. (2016). Standard Specification of Concrete.
   Google Scholar
• Ministry of Land, Transport and Maritime Affairs. (2009). Guidelines for Mix Design of Cement Concrete.
   Google Scholar
• Rafi, M. M., & Nasir, M. M. (2016). Models for prediction of 28-day concrete compressive strength. Journal of Testing and Evaluation, 44(3), 20140139. ISSN 0090-3973. https://doi.org/10.1520/JTE20140139
   Web of Science ®Google Scholar
• Rahman, A., & Ueda, T. (2014). Experimental investigation and numerical modeling of peak shear stress of brick masonry mortar joint under compression. Journal of Materials in Civil Engineering, 26(9), 04014061. DOI: 04014061-1 ∼ 13. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000958
   Web of Science ®Google Scholar
• Rao, G. A., & Rao, A. S. (2009). Toughness indices of steel fibre reinforced concrete under mode II loading. Materials and Structures, 42(9), 1173–1184.
   Web of Science ®Google Scholar
• Sevil, T., Baran, M., Bilir, T., & Canbay, E. (2011). Use of steel fibre reinforced mortar for seismic strengthening. Construction and Building Materials, 25(2), 892–899. https://doi.org/10.1016/j.conbuildmat.2010.06.096
   Web of Science ®Google Scholar
• Sevil, T., Baran, M., Bilir, T., & Canbay, E. (2011). Use of steel fibre reinforced mortar for seismic strengthening. Construction and Building Materials, 25, 892–899.
   Web of Science ®Google Scholar
• Shin, K.-J., Jang, K.-H., & Kim, E. S. (2008). Correlation between flexural toughness and cracking charateristics of micro-fibre reinforced mortar according to fibre contents. KSCE Journal of Civil Engineering, 28(2A), 249–257.
   Google Scholar
• Spadea, S., Farina, I., Carrafiello, A., & Fraternali, F. (2015). Recycled nylon fibres as cement mortar reinforcement. Construction and Building Materials, 80, 200–209. https://doi.org/10.1016/j.conbuildmat.2015.01.075
   Web of Science ®Google Scholar
• Spadea, S., Farina, I., Carrafiello, A., & Fraternali, F. (2015). Recycled nylon fibres as cement mortar reinforcement. Construction and Building Materials, 80, 200–209.
   Web of Science ®Google Scholar
• Susan, A. B., Julian, B., Crsthian, G., Ruby, M. D. G., Silvio, D., & Dr, E. (2012). Performance of refractory aluminosilicate particle/fibre-reinforced geopolymer composites. Composites Part B: Engineering, 43(4), 1919–1928.
   Web of Science ®Google Scholar
• Tehmina, A., Sadaqat, U. K., & Ayesha, A. (2019). Analytical model for the compressive stress-strain behavior of PVA-FRC. Construction and Building Materials, 214, 581–593.
   Web of Science ®Google Scholar
• Truong, G. T., Kim, J. C., & Choi, K.-K. (2017). Seismic performance of reinforced concrete columns retrofitted by various methods. Engineering Structures, 134, 217–235. https://doi.org/10.1016/j.engstruct.2016.12.046
   Web of Science ®Google Scholar
• Truong, G. T., Son, M.-K., & Choi, K.-K. (2019). Mechanical performance and durability of latex-modified fibre-reinforced concrete. Journal of Advanced Concrete Technology, 17(2), 79–92. https://doi.org/10.3151/jact.17.79
   Web of Science ®Google Scholar
• Warun, W., Manote, S., Piti, S., Prinya, C., & Nemkumar, B. (2018). Resistance to sulfate attack and underwater abrasion of fibre reinforced cement mortar. Construction and Building Materials, 189, 686–694.
   Web of Science ®Google Scholar
• Yuan, Q., Xianwei, Z., & Junrui, C. (2019). Damage performance and compressive behavior of early-age green concrete with recycled nylon fabric under an axial load. Construction and Building Materials, 209, 105–114.
   Web of Science ®Google Scholar
• Zampieri, P., Simoncello, N., Gonzalez Libreros, J., & Pellegrino, C. (2020). Bond behavior of steel fibre-reinforced mortar (SFRM) applied onto masonry substrate. Archives of Civil and Mechanical Engineering, 20(3), 1–20. https://doi.org/10.1007/s43452-020-00090-6
   Web of Science ®Google Scholar
• Zhang, D., Yu, J., Wu, H., Jaworska, B., Ellis, B. R., & Li, V. C. (2020). Discontinuous micro-fibres as intrinsic reinforcement for ductile Engineered Cementitious Composites (ECC). Composites Part B: Engineering, 184, 107741.
   Web of Science ®Google Scholar