Effect of transient drying on mechanical properties of concrete specimens

References

• Abbas, A., Carcasses, M., & Ollivier, J. P. (1999). Gas permeability of concrete in relation to its degree of saturation. Materials and Structures, 32(1), 3–8. https://doi.org/10.1007/BF02480405
   Google Scholar
• Acker, P., Boulay, C., & Rossi, P. (1987). On the importance of initial stresses in concrete and of the resulting mechanical effects. Cement and Concrete Research, 17(5), 755–764. https://doi.org/10.1016/0008-8846(87)90038-X
   Web of Science ®Google Scholar
• Baroghel-Bouny, V., Mainguy, M., Lassabatere, T., & Coussy, O. (1999). Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials. Cement and Concrete Research, 29(8), 1225–1238. https://doi.org/10.1016/S0008-8846(99)00102-7
   Web of Science ®Google Scholar
• Bartlett, F. M., & MacGregor, J. G. (1994). Effect of moisture condition on concrete core strengths. Materials Journal, 91(3), 227–236.
   Google Scholar
• Bazant, Z. P., & Prat, P. C. (1988). Effect of temperature and humidity on fracture energy of concrete. ACI Materials Journal, 85(4), 262–271.
   Web of Science ®Google Scholar
• Bella, C. D., Wyrzykowski, M., & Lura, P. (2017). Evaluation of the ultimate drying shrinkage of cement-based mortars with poroelastic models. Materials and Structures, 50(1), 52. https://doi.org/10.1617/s11527-016-0870-0
   Web of Science ®Google Scholar
• Benboudjema, F. (2002). Modélisation des déformations différees du béton sous sollicitations biaxiales. Application aux enceintes de confinements de bâtiments réacteurs des centrales nucléaires [Ph.D. thesis]. Université de Marne la Vallée
   Google Scholar
• Benboudjema, F., Meftah, F., & Torrenti, J. (2005). Interaction between drying, shrinkage, creep and cracking phenomena in concrete. Engineering Structures, 27(2), 239–250. http://www.sciencedirect.com/science/article/pii/S0141029604003359 https://doi.org/10.1016/j.engstruct.2004.09.012
   Web of Science ®Google Scholar
• Bisschop, J., & Van Mier, J. (2002). Effect of aggregates on drying shrinkage microcracking in cement-based composites. Materials and Structures, 35(8), 453–461. https://doi.org/10.1007/BF02483132
   Google Scholar
• Brooks, J., & Neville, A. (1977). A comparison of creep, elasticity and strength of concrete in tension and in compression. Magazine of Concrete Research, 29(100), 131–141. arXiv:, https://doi.org/10.1680/macr.1977.29.100.131
   Web of Science ®Google Scholar
• Burlion, N., Bourgeois, F., & Shao, J.-F. (2005). Effects of desiccation on mechanical behaviour of concrete. Cement and Concrete Composites, 27(3), 367–379. https://doi.org/10.1016/j.cemconcomp.2004.05.004
   Web of Science ®Google Scholar
• Burlion, N., Yurtdas, I., & Skoczylas, F. (2003). Comportement mécanique et séchage de matériaux à matrice cimentaire: Comparaison mortier/béton. Revue Française de Génie Civil, 7(2), 145–165. https://doi.org/10.1080/12795119.2003.9692486
   Google Scholar
• Galenne, E., & Masson, B. (2012). A new mock-up for evaluation of the mechanical and leak-tightness behaviour of npp containment building. In International conference on numerical modeling strategies for sustainable concrete structures (SSCS), Aix-en-Provence, France.
   Google Scholar
• Granger, L., Torrenti, J.-M., & Acker, P. (1997). Thoughts about drying shrinkage: Experimental results and quantification of structural drying creep. Materials and Structures, 30(10), 588–598. https://doi.org/10.1007/BF02486900
   Google Scholar
• Guinea, G., Planas, J., & Elices, M. (1992). Measurement of the fracture energy using three-point bend tests: Part 1—Influence of experimental procedures. Materials and Structures, 25(4), 212–218. https://doi.org/10.1007/BF02473065
   Google Scholar
• Hamami, A. A., Turcry, P., & Aït-Mokhtar, A. (2012). Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars. Cement and Concrete Research, 42(2), 490–498. https://doi.org/10.1016/j.cemconres.2011.11.019
   Web of Science ®Google Scholar
• Hanson, J. (1968). Effects of curing and drying enviroments on splitting tensile strength of concrete. Journal Proceedings of American Concrete Institute, 65, 535–543.
   Google Scholar
• Hillerborg, A. (1985). The theoretical basis of a method to determine the fracture energy GF of concrete. Materials and Structures, 18(4), 291–296. https://doi.org/10.1007/BF02472919
   Google Scholar
• Idiart, A., Bisschop, J., Caballero, A., & Lura, P. (2012). A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites. Cement and Concrete Research, 42(2), 272–281. https://doi.org/10.1016/j.cemconres.2011.09.013
   Web of Science ®Google Scholar
• Kallel, H., Carré, H., Borderie, C. L., Masson, B., & Tran, N. (2017). Effect of temperature and moisture on the instantaneous behaviour of concrete. Cement and Concrete Composites, 80, 326–332. https://doi.org/10.1016/j.cemconcomp.2017.03.021
   Web of Science ®Google Scholar
• Kosmatka, S. H., Kerkhoff, B., & Panarese, W. C. (2002). Design and control of concrete mixtures (Vol. 15). Skokie, IL: Portland Cement Assoc.
   Google Scholar
• Maruyama, I., Nishioka, Y., Igarashi, G., & Matsui, K. (2014). Microstructural and bulk property changes in hardened cement paste during the first drying process. Cement and Concrete Research, 58, 20–34. https://doi.org/10.1016/j.cemconres.2014.01.007
   Web of Science ®Google Scholar
• Maruyama, I., Sasano, H., Nishioka, Y., & Igarashi, G. (2014). Strength and young’s modulus change in concrete due to long-term drying and heating up to 90 °C. Cement and Concrete Research, 66, 48–63. https://doi.org/10.1016/j.cemconres.2014.07.016.
   Web of Science ®Google Scholar
• Menou, A., Mounajed, G., Boussa, H., Pineaud, A., & Carre, H. (2006). Residual fracture energy of cement paste, mortar and concrete subject to high temperature. Theoretical and Applied Fracture Mechanics, 45(1), 64–71. https://doi.org/10.1016/j.tafmec.2005.11.007
   Web of Science ®Google Scholar
• Michou, A., Hilaire, A., Benboudjema, F., Nahas, G., Wyniecki, P., & Berthaud, Y. (2015). Reinforcement-concrete bond behavior: experimentation in drying conditions and meso-scale modeling. Engineering Structures, 101(15), 570–582. https://doi.org/10.1016/j.engstruct.2015.07.028
   Google Scholar
• Mills, R. (1960). Strength-maturity relationship for concrete which is allowed to dry, In: Neville, A.M. (Ed.), RILEM International Symposium on Concrete and Reinforced Concrete in Hot Countries (Haifa), Properties of concrete (5th ed., pp. 601–602). Pearson Prentic Hall. 1995.
   Google Scholar
• NF-EN-12390-2. Essai pour béton durci: résistance à la compression des éprouvettes, Tech. rep., Afnor (Avril 2012).
   Google Scholar
• NF-EN-12390-6. Essai pour béton durci: détermination de la résistance en traction par fendage d’éprouvettes, Tech. rep., Afnor (Avril 2012).
   Google Scholar
• NF-P18-459. (2010). Essai pour béton durci: essai de porosité et de masse volumique, Tech. rep., Afnor
   Google Scholar
• Okajima, T., Ishikawa, T., & Ichise, K. (1980). Moisture effect on the mechanical properties of cement mortar. Transactions of the Japan Concrete Institute, 2, 125–132.
   Google Scholar
• Pihlajavaara, S. (1974). A review of some of the main results of a research on the ageing phenomena of concrete: Effect of moisture conditions on strength, shrinkage and creep of mature concrete. Cement and Concrete Research, 4(5), 761–771. https://doi.org/10.1016/0008-8846(74)90048-9
   Google Scholar
• Popovics, S. (1986). Effect of curing method and final moisture condition on compressive strength of concrete. Journal Proceedings, 83, 650–657.
   Google Scholar
• Popovics, S. (2005). Effects of uneven moisture distribution on the strength of and wave velocity in concrete. Ultrasonics, 43(6), 429–434. https://doi.org/10.1016/j.ultras.2004.09.007
   PubMed Web of Science ®Google Scholar
• Poyet, S., Trentin, K., & Amblard, E. (2016). The use of sorption balance for the characterization of the water retention curve of cement-based materials. Journal of Advanced Concrete Technology, 14(7), 354–367. https://doi.org/10.3151/jact.14.354
   Web of Science ®Google Scholar
• Samouh, E. e L. A. (2012). Hamza et Rozière, Interprétation des mesures du retrait de dessiccation des bétons autoplaçants (bap). Rencontres AUGC-IBPSA. https://doi.org/10.13140/2.1.1348.3044
   Google Scholar
• Sasano, H., Maruyama, I., Nakamura, A., Yamamoto, Y., & Teshigawara, M. (2018). Impact of drying on structural performance of reinforced concrete shear walls. Journal of Advanced Concrete Technology, 16(5), 210–232. https://doi.org/10.3151/jact.16.210
   Web of Science ®Google Scholar
• Soleilhet, F., Benboudjema, F., Jourdain, X., & Gatuingt, F. (2020). Role of pore pressure on cracking and mechanical performance of concrete subjected to drying. Cement and Concrete Composites, 114, 103727. https://doi.org/10.1016/j.cemconcomp.2020.103727
   Web of Science ®Google Scholar
• Torrenti, J.-M. (1987). Comportement multiaxial du béton: aspects expérimentaux et modélisation, Ph.D. thesis, Ecole Nationale des Ponts et Chaussées.
   Google Scholar
• Villain, G., Ihamouten, A., & Dérobert, X. (2017). Determination of concrete water content by coupling electromagnetic methods: Coaxial/cylindrical transition line with capacitive probes. NDT & E International, 88(Supplement C), 59–70. URL http://www.sciencedirect.com/science/article/pii/S096386951730107X https://doi.org/10.1016/j.ndteint.2017.02.004
   Google Scholar
• Walker, S., & Bloem, D. L. (1957). Effects of curing and moisture distribution on measured strength of concrete. In Highway Research Board Proceedings, 36. pp. 334-346.
   Google Scholar
• Wittmann, F. (1968). Surface tension skrinkage and strength of hardened cement paste. Matériaux et Constructions, 1(6), 547–552. https://doi.org/10.1007/BF02473643
   Google Scholar
• Wittmann, F. (1985). Deformation of concrete at variable moisture content. In Z. Bazant (Ed.), Mechanics of geomaterials (pp. 425–459). John Wiley and Sons Ltd.
   Google Scholar
• Wittmann, F. H., Rokugo, K., Brühwiler, E., Mihashi, H., & Simonin, P. (1988). Fracture energy and strain softening of concrete as determined by means of compact tension specimens. Materials and Structures, 21(1), 21–32. https://doi.org/10.1007/BF02472525
   Google Scholar
• Wu, Z., Wong, H., & Buenfeld, N. (2017). Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking. Cement and Concrete Research 98 Research, 98, 136–154. https://doi.org/10.1016/j.cemconres.2017.04.006
   Web of Science ®Google Scholar
• Yurtdas, I. (2003). Couplage comportement mécanique et dessiccation des matériaux à matrice cimentaire: étude expérimentale sur mortiers [Ph.D. thesis]. Lille 1
   Google Scholar
• Yurtdas, I., Burlion, N., Shao, J.-F., & Li, A. (2011). Evolution of the mechanical behaviour of a high performance self-compacting concrete under drying. Cement and Concrete Composites, 33(3), 380–388. https://doi.org/10.1016/j.cemconcomp.2010.12.002
   Web of Science ®Google Scholar
• Yurtdas, I., Peng, H., Burlion, N., & Skoczylas, F. (2006). Influences of water by cement ratio on mechanical properties of mortars submitted to drying. Cement and Concrete Research, 36(7), 1286–1293. https://doi.org/10.1016/j.cemconres.2005.12.015
   Web of Science ®Google Scholar