1,394
Views
4
CrossRef citations to date
0
Altmetric
Review Article

Reusing plastic waste in the production of bricks and paving blocks: a review

, , &
Pages 6941-6974 | Received 26 May 2021, Accepted 07 Aug 2021, Published online: 23 Aug 2021

References

  • Abdelaal, M. Y., Sobahi, T. R., & Makki, M. S. I. (2011). Chemical transformation of pet waste through glycolysis. Construction and Building Materials, 25(8), 3267–3271. https://doi.org/10.1016/j.conbuildmat.2011.03.013
  • Abdul-Latif, N. I. S., Ong, M. Y., Nomanbhay, S., Salman, B., & Show, P. L. (2020). Estimation of carbon dioxide (CO2) reduction by utilization of algal biomass bioplastic in Malaysia using carbon emission pinch analysis (CEPA). Bioengineered, 11(1), 154–164. https://doi.org/10.1080/21655979.2020.1718471
  • Achinas, S., Horjus, J., Achinas, V., & Euverink, G. J. W. (2019). A PESTLE analysis of biofuels energy industry in Europe. Sustainability, 11(21), 5981. https://doi.org/10.3390/su11215981
  • Afroz, R., Rahman, A., Masud, M. M., & Akhtar, R. (2017). The knowledge, awareness, attitude and motivational analysis of plastic waste and household perspective in Malaysia. Environmental Science and Pollution Research International, 24(3), 2304–2315. https://doi.org/10.1007/s11356-016-7942-0
  • Agyeman, S., Obeng-Ahenkora, N. K., Assiamah, S., & Twumasi, G. (2019). Exploiting recycled plastic waste as an alternative binder for paving blocks production. Case Studies in Construction Materials, 11, e00246. https://doi.org/10.1016/j.cscm.2019.e00246
  • Ahmad, N. F. A., Razali, S. N. M., Sahat, S., & Kaamin, M. (2018). September). PET concrete as paver block. In AIP Conference Proceedings (Vol. 2016, No. 1, p. 020015). AIP Publishing LLC.
  • Aiswaria, K., Abdulla, K., Akhil, E. B., Lashmi, H. G., & Timmy, J. (2018). Manufacturing and experimental investigation of bricks with plastic and M-sand. International Journal of Innovative Research in Science, Engineering and Technology, 7(6), 6558–6562.
  • Akinyele, J. O., & Toriola, I. O. (2018). The effect of crushed plastics waste on the structural properties of sandcrete blocks. African Journal of Science. Technology, Innovation and Development, 10(6), 709–713.
  • Alabi, O. A., Ologbonjaye, K. I., Awosolu, O., & Alalade, O. E. (2019). Public and environmental health effects of plastic wastes disposal: a review. Journal of Toxicology and Risk Assessment, 5(21), 1–13.
  • Ali, N., Yusuf, N. M., Khalid, F. S., Shahidan, S., & Abdullah, S. R. (2018). The effect of ater cment ratio on cement brick containing high density polyethylene (HDPE) as sand replacement. In MATEC Web of Conferences (vol. 150, pp. 1–5). EDP Sciences.
  • Alighiri, D., Yasin, M. N., Rohmawati, B., & Drastisianti, A. (2019). Processing of recycled waste PET (polyethylene terephthalate) plastics bottle into for the lightweight and reinforcement bricks. Journal of Physics: Conference Series, 1321(2), 022023.
  • Alomar, C., Estarellas, F., & Deudero, S. (2016). Microplastics in the Mediterranean Sea: deposition in coastal shallow sediments, spatial variation and preferential grain size. Marine Environmental Research, 115, 1–10. https://doi.org/10.1016/j.marenvres.2016.01.005
  • Al-Shathr, B. S., & Al-Ebrahimy, S. N. (2018). Production of lightweight clay bricks using polymer wastes. Engineering and Technology Journal, 36(8 Part (A) Engineering), 823–831.
  • Andrady, A. L. (1994). Assessment of environmental biodegradation of synthetic polymers. Journal of Macromolecular Science, Part C: Polymer Reviews, 34(1), 25–76. https://doi.org/10.1080/15321799408009632
  • Andrady, A. L. (2011). Microplastics in the marine environment. Marine Pollution Bulletin, 62(8), 1596–1605. https://doi.org/10.1016/j.marpolbul.2011.05.030
  • Andrews, G. (2012). Plastics in the Ocean Affecting Human Health. Retrieved September 15, 2020, from Geology and Human Health: https://serc.carleton.edu/NAGTWorkshops/health/case_studies/plastics.html
  • Anuradha, R., Panimayam, A., Chinnadurai, P., Pradeesh, K., & Jaffer, A. U. (2017). Utilisation of waste plastics as a replacement of coarse aggregate in paver blocks. International Journal of ChemTech Research, 10, 211–218.
  • Araghi, H. J., Nikbin, I. M., Reskati, S. R., Rahmani, E., & Allahyari, H. (2015). An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack. Construction and Building Materials, 77, 461–471. https://doi.org/10.1016/j.conbuildmat.2014.12.037
  • Arhant, M., & Davies, P. (2019). 2- Thermoplastic matrix composites for marine applications. In R. Pemberton, J. Summerscales, & J. Grahan-Jones (Eds.), Woodhead publishing series in composites science and engineering, marine composites (pp. 31–53). Woodhead Publishing. Retrieved from https: doi.org/ https://doi.org/10.1016/B978-0-08-102264-1.00002.9
  • Assamoi, B., & Lawryshyn, Y. (2012). The environmental comparison of landfilling vs. incineration of MSW accounting for waste diversion. Waste Management (New York, NY), 32(5), 1019–1030. https://doi.org/10.1016/j.wasman.2011.10.023
  • Auta, H. S., Emenike, C. U., & Fauziah, S. H. (2017). Distribution and importance of microplastics in the marine environment: a review of the sources, fate, effects, and potential solutions. Environment International, 102, 165–176. https://doi.org/10.1016/j.envint.2017.02.013
  • Avio, C. G., Gorbi, S., & Regoli, F. (2015). Experimental development of a new protocol for extraction and characterization of microplastics in fish tissues: first observations in commercial species from Adriatic Sea. Marine Environmental Research, 111, 18–26. https://doi.org/10.1016/j.marenvres.2015.06.014
  • Awasthi, A. K., Shivashankar, M., & Majumder, S. (2017). Plastic solid waste utilization technologies: A Review. In IOP conference series: Materials science and engineering (Vol. 263, No. 2, p. 022024). IOP Publishing.
  • Awoyera, P. O., & Adesina, A. (2020). Plastic wastes to construction products: Status, limitations and future perspective. Case Studies in Construction Materials, 12, e00330. https://doi.org/10.1016/j.cscm.2020.e00330
  • Awuchi, C. G., & Awuchi, C. G. (2019). Impacts of plastic pollution on the sustainability of seafood value chain and human health. International Journal of Advanced Academic Research, 5(11), 46–138.
  • Azoulay, D., Villa, P., Moon, D., Lloyd-Smith, M., Moore, L., & Hernandez, V. (2019). Report: Plastic Threatens Human Health at a Global Scale. Retrieved September 15, 2020, from Plastic Pollution Coalition: https://www.plasticpollutioncoalition.org/blog/2019/2/20/report-plastic-threatens-human-health-at-a-global-scale
  • Bakir, A., Rowland, S. J., & Thompson, R. C. (2014). Transport of persistent organic pollutants by microplastics in estuarine conditions. Estuarine, Coastal and Shelf Science, 140, 14–21. https://doi.org/10.1016/j.ecss.2014.01.004
  • Balakrishnan, A. A. M. N. F. R., & Flora, R. M. N. (2017). The environmental impact of plastics and recycling of plastic waste. International Journal of Engineering Research and Reviews (Online), 5(3), 14–20.
  • Barboza, L. G. A., & Gimenez, B. C. G. (2015). Microplastics in the marine environment: current trends and future perspectives. Marine Pollution Bulletin, 97(1–2), 5–12. https://doi.org/10.1016/j.marpolbul.2015.06.008
  • Barboza, L. G. A., Lopes, C., Oliveira, P., Bessa, F., Otero, V., Henriques, B., Raimundo, J., Caetano, M., Vale, C., & Guilhermino, L. (2020). Microplastics in wild fish from North East Atlantic Ocean and its potential for causing neurotoxic effects, lipid oxidative damage, and human health risks associated with ingestion exposure. The Science of the Total Environment, 717, 134625. https://doi.org/10.1016/j.scitotenv.2019.134625
  • Barnes, D. K., Galgani, F., Thompson, R. C., & Barlaz, M. (2009). Accumulation and fragmentation of plastic debris in global environments. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 364(1526), 1985–1998. https://doi.org/10.1098/rstb.2008.0205
  • Barra, R., Leonard, S. A., Whaley, C., Bierbaum, W. R., Gonzalez, P., Hartikainen, E., Hoogzaad, J., ….Zuin, V. G. (2018). Plastics and the circular economy. Scientific and Technical Advisory Panel, 1–28.
  • Begum, S. A., Rane, A. V., & Kanny, K. (2020). Applications of compatiblized polymer blends in automobile industry. In Compatibilization of polymer blends (pp. 563–593). Elsevier.
  • Bellasi, A., Binda, G., Pozzi, A., Galafassi, S., Volta, P., & Bettinetti, R. (2020). Microplastic contamination in freshwater environments: A review, focusing on interactions with sediments and benthic organisms. Environments, 7(4), 30. https://doi.org/10.3390/environments7040030
  • Beltrán-Sanahuja, A., Casado-Coy, N., Simó-Cabrera, L., & Sanz-Lázaro, C. (2020). Monitoring polymer degradation under different conditions in the marine environment. Environmental Pollution (Barking, Essex: 1987), 259, 113836. https://doi.org/10.1016/j.envpol.2019.113836
  • Bhagat, S., Bhardawaj, A., Mittal, P., Chandak, P., Akhtar, M., & Sharma, P. (2016). Evaluating plastic waste disposal options in Delhi using multi criteria decision analysis. Institute of Integrative Omics and Applied Biotechnology, 7(11), 25–35.
  • Binici, H., Aksogan, O., & Shah, T. (2005). Investigation of fibre reinforced mud brick as a building material. Construction and Building Materials, 19(4), 313–318. https://doi.org/10.1016/j.conbuildmat.2004.07.013
  • Boerger, C. M., Lattin, G. L., Moore, S. L., & Moore, C. J. (2010). Plastic ingestion by planktivorous fishes in the North Pacific Central Gyre. Marine Pollution Bulletin, 60(12), 2275–2278. https://doi.org/10.1016/j.marpolbul.2010.08.007
  • Bolden, J., Abu-Lebdeh, T., & Fini, E. (2013). Utilization of recycled and waste materials in various construction applications. American Journal of Environmental Science, 9(1), 14–24.
  • Borrelle, S. B., Ringma, J., Law, K. L., Monnahan, C. C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G. H., Hilleary, M. A., Eriksen, M., Possingham, H. P., De Frond, H., Gerber, L. R., Polidoro, B., Tahir, A., Bernard, M., Mallos, N., Barnes, M., & Rochman, C. M. (2020). Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution. Science (New York, NY), 369(6510), 1515–1518. https://doi.org/10.1126/science.aba3656
  • Briassoulis, D., Hiskakis, M., & Babou, E. (2013). Technical specifications for mechanical recycling of agricultural plastic waste. Waste management, 33(6), 1516–1530. https://doi.org/10.1016/j.wasman.2013.03.004
  • British Plastic Federation. (2008). Oil Consumption. Retrieved May 5, 2020, from British Plastic Federation: http://www.bpf.co.uk/Oil-Consumption.aspx.
  • Brouwer, M. T., van Velzen, E. U. T., Augustinus, A., Soethoudt, H., De Meester, S., & Ragaert, K. (2018). Predictive model for the Dutch post-consumer plastic packaging recycling system and implications for the circular economy. Waste Management, 71, 62–85. https://doi.org/10.1016/j.wasman.2017.10.034
  • Bruvoll, A. (2001). Factors influence solid waste generation and management. Journal of Solid Waste Technology and Management, 27(3), 156–162.
  • Cantonwine, D. E., Hauser, R., & Meeker, J. D. (2013). Bisphenol A and human reproductive health. Expert Review of Obstetrics & Gynecology, 8(4), 329–335. https://doi.org/10.1586/17474108.2013.811939
  • Caporossi, L., Alteri, A., Campo, G., Paci, E., Tranfo, G., Capanna, S., Papaleo, E., Pigini, D., Viganò, P., & Papaleo, B. (2020). Cross sectional study on exposure to BPA and phthalates and semen parameters in men attending a fertility center. International Journal of Environmental Research and Public Health, 17(2), 489. https://doi.org/10.3390/ijerph17020489
  • Carlsson, R. M. (2005). Economic assessment of municipal waste management system: case studies using a combination of life cycle assessment (LCA) and life cycle costing (LCC). Journal of Cleaner Production, 13, 253–263.
  • Carr, S. A., Liu, J., & Tesoro, A. G. (2016). Transport and fate of microplastic particles in wastewater treatment plants. Water Research, 91, 174–182. https://doi.org/10.1016/j.watres.2016.01.002
  • Carson, S. H., Colbert, S. L., Kaylor, M. J., & McDermid, K. J. (2011). Small plastic debris changes water movement and heat transfer through beach sediments. Marine Pollution Bulletin, 62(8), 1708–1713.
  • Cestari, S. (2020). Why plastic waste is an ideal building material. Retrieved on December 11, 2020, from BBC: https://www.bbc/future/article/20200819-why-plastic-waste-is-an-ideal-building-material.
  • Chandegera, V. K., Cholera, S. P., Nandasana, J. N., Kumpavat, M. T., & Patel, K. C. (2015). Plastic packaging waste impacts on climate change and its mitigation. In R. Subbaiah, & G. V. Prajapathi, Adaptation of climate resilient water management and agriculture (Vol. 3, pp. 404–415). Gyan Publishing House.
  • Chougule, R. S., Yamgar, S., Salunkhe, S., Patil, P., Saitawadekar, A., & Kapase, M. (2017). Use of plastic waste in civil construction. International Journal of Engineering Technology, Management and Applied Sciences, 5(4), 186–190.
  • Choy, C. A., & Drazen, J. C. (2013). Plastic for dinner? Observations of frequent debris ingestion by pelagic predatory fishes from the central North Pacific. Marine Ecology Progress Series, 485, 155–163. https://doi.org/10.3354/meps10342
  • Chris, T., & Dan, M. (2017). Invisibles: the plastics inside us. Retrieved May 5, 2020, from Orbmedia.org: https://orbmedia.org/stories/invisibles_plastics
  • Christodoulou, A., & Cullinane, K. (2019). Identifying the main opportunities and challenges from the implementation of a port energy management system: A SWOT/PESTLE Analysis. Sustainability, 11(21), 6046. https://doi.org/10.3390/su11216046
  • Cincinelli, A., Scopetani, C., Chelazzi, D., Lombardini, E., Martellini, T., Katsoyiannis, A., Fossi, M. C., & Corsolini, S. (2017). Microplastic in the surface waters of the Ross Sea (Antarctica): occurrence, distribution and characterization by FTIR. Chemosphere, 175, 391–400. https://doi.org/10.1016/j.chemosphere.2017.02.024
  • Coates, G. W., & Getzler, Y. D. (2020). Chemical recycling to monomer for an ideal, circular polymer economy. Nature Reviews Materials, 5, 1–16.
  • Corinaldesi, V., Donnini, J., & Nardinocchi, A. (2015). Lightweight plasters containing plastic waste for sustainable and energy-efficient building. Construction and Building Materials, 94, 337–345. https://doi.org/10.1016/j.conbuildmat.2015.07.069
  • Corvellec, H., & Bramryd, T. (2012). The multiple market-exposure of waste management companies: A case study of two Swedish municipally owned companies. Waste Management (New York, NY), 32(9), 1722–1727. https://doi.org/10.1016/j.wasman.2012.04.005
  • Corvellec, H., Campos, M. J. Z., & Zapata, P. (2013). Infrastructures, lock-in, and sustainable urban development: the case of waste incineration in the Göteborg Metropolitan Area. Journal of Cleaner Production, 50, 32–39. https://doi.org/10.1016/j.jclepro.2012.12.009
  • Creton, C. (2017). Molecular stitches for enhanced recycling of packaging. Science (New York, NY), 355(6327), 797–798. https://doi.org/10.1126/science.aam5803
  • Cudjoe, D., & Acquah, P. M. (2020). Environmental impact analysis of municipal solid waste incineration in African countries. Chemosphere, 265, 129186.
  • Cunningham, E. M., Kiriakoulakis, K., Dick, J. T., Kregting, L., Schuchert, P., & Sigwart, J. D. (2020). Driven by speculation, not by impact-the effects of plastic on fish species. Journal of Fish Biology, 96(6), 1294–1297. https://doi.org/10.1111/jfb.14303
  • Cunningham, E. M., & Sigwart, J. D. (2019). Environmentally accurate microplastic levels and their absence from exposure studies. Integrative and Comparative Biology, 59(6), 1485–1496. https://doi.org/10.1093/icb/icz068
  • d’Ambrières, W. (2019). Plastics recycling worldwide: current overview and desirable changes. Field Actions Science Reports. The Journal of Field Actions, (Special Issue 19), 12–21.
  • da Costa, J. P., Santos, P. S. M., Duarte, A. C., & Rocha-Santos, T. (2016). (Nano)plastics in the environment-sources, fates and effects. Science of the Total Environment, 566, 15–26.
  • Daftardar, A., Shah, R., Gandhi, P., & Garg, H. (2017). Use of waste plastic as a construction material. International Journal of Engineering and Applied Sciences, 4(11), 148–151.
  • Datta, J., & Kopczyńska, P. (2016). From polymer waste to potential main industrial products: Actual state of recycling and recovering. Critical Reviews in Environmental Science and Technology, 46(10), 905–946. https://doi.org/10.1080/10643389.2016.1180227
  • de Camargo, R. V., & Saron, C. (2020). Mechanical–chemical recycling of low-density polyethylene waste with polypropylene. Journal of Polymers and the Environment, 28(3), 794–802. https://doi.org/10.1007/s10924-019-01642-5
  • de Weerdt, L., Sasao, T., Compernolle, T., Van Passel, S., & De Jaeger, S. (2020). The effect of waste incineration taxation on industrial plastic waste generation: A panel analysis. Resources, Conservation and Recycling, 157, 104717. https://doi.org/10.1016/j.resconrec.2020.104717
  • Devasahayam, S., Raju, G. B., & Hussain, C. M. (2019). Utilization and recycling of end of life plastics for sustainable and clean industrial processes including the iron and steel industry. Materials Science for Energy Technologies, 2(3), 634–646. https://doi.org/10.1016/j.mset.2019.08.002
  • Devezas, T. C., Vaz, A. M., & Magee, C. L. (2017). Global Pattern in Materials Consumption: an empirical study. In T. Devezas, J. Leitao, & A. Sarygulov (Ed.), Industry 4.0. (pp. 263–292). Springer. https://doi.org/10.1007/978-3-319-49604-7_14
  • Dinesh, S., Parishee, M. K., Sriram, J., & Bashith, M. M. (2018). Effective use of waste plastic as manufacturing of paver block. International Journal of Advanced Research in Basic Engineering Sciences and Technology, 4, 231–235.
  • Dormer, A., Finn, D. P., Ward, P., & Cullen, J. (2013). Carbon footprint analysis in plastics manufacturing. Journal of Cleaner Production, 51, 133–141. https://doi.org/10.1016/j.jclepro.2013.01.014
  • dos Santos, I. F. S., Mensah, J. H. R., Gonçalves, A. T. T., & Barros, R. M. (2020). Incineration of municipal solid waste in Brazil: An analysis of the economically viable energy potential. Renewable Energy., 149, 1386–1394.
  • Dubaish, F., & Liebezeit, G. (2013). Suspended microplastics and black carbon particles in the Jade system, southern North Sea. Water, Air, & Soil Pollution, 224(2), 1352. https://doi.org/10.1007/s11270-012-1352-9
  • Eerkes-Medrano, D., Thompson, R. C., & Aldridge, D. C. (2015). Microplastics in freshwater systems: a review of the emerging threats, identification of knowledge gaps and prioritisation of research needs. Water Research, 75, 63–82. https://doi.org/10.1016/j.watres.2015.02.012
  • Energy Information Administration (EIA). (2020). How much oil used to make plastics. Retrieved August 15, 2020, from Eneygy Information Administration: https://www.eia.gov/tools/faqs/faq.php?id=34&t=6
  • Environmental Protection Department. (2019). Hong Kong Waste treatment and disposal. Retrieved December 9, 2020 from Environmental Protection Department: https://www.epd.gov.hk/epd/english/environmentinhk/waste/data/stat_treat.html
  • Eriksen, M. K., Christiansen, J. D., Daugaard, A. E., & Astrup, T. F. (2019). Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling. Waste Management, 96, 75–85. https://doi.org/10.1016/j.wasman.2019.07.005
  • Eriksen, M., Lebreton, L. C. M., Carson, H. S., Thiel, M., Moore, C. J., Borerro, J. C., Galgani, F., Ryan, P. G., & Reisser, J. (2014). Plastic pollution in the world’s oceans: more than 5 trillion plastic pieces weighing over 250,000 tons afloat at sea. PloS One, 9(12), e111913. https://doi.org/10.1371/journal.pone.0111913
  • Eriksson, C., Burton, H., Fitch, S., Schulz, M., & van den Hoff, J. (2013). Daily accumulation rates of marine debris on sub-Antarctic island beaches. Marine Pollution Bulletin, 66(1–2), 199–208. https://doi.org/10.1016/j.marpolbul.2012.08.026
  • Erren, T., Zeuß, D., Steffany, F., & Meyer-Rochow, B. (2009). Increase of wildlife cancer: an echo of plastic pollution? Nature Reviews Cancer, 9(11), 842–842. https://doi.org/10.1038/nrc2665-c1
  • Escamilla-García, P. E., Camarillo-López, R. H., Carrasco-Hernández, R., Fernández-Rodríguez, E., & Legal-Hernández, J. M. (2020). Technical and economic analysis of energy generation from waste incineration in Mexico. Energy Strategy Reviews, 31, 100542. https://doi.org/10.1016/j.esr.2020.100542
  • Estahbanati, S., & Fahrenfeld, N. L. (2016). Influence of wastewater treatment plant discharges on microplastic concentrations in surface water. Chemosphere, 162, 277–284. https://doi.org/10.1016/j.chemosphere.2016.07.083
  • Eureka Recycling. (n.d.). Recycling plastics: complications & limitations. Retrieved May 5, 2020, from Eureka Recycling: http://www.eurekarecyling.org
  • European Commision. (2018). An European strategy for plastics in a circular economy. COM (2018) 28 FInal, European Commison.
  • Eweed, K. M., Ebrahim, Y. K., & Ali, R. S. (2018). Effecting the addition of the Plastic waste and Rubber on the constructions materials properties. IOP Conference Series: Materials Science and Engineering, 454(1), p. 012151.
  • Federation, B. P. (2008). Oil consumption. Retrieved May 10, 2020, from Oil consumption: http://www.bpf.co.uk/Oil_Consumption.aspx.
  • Ferreira, L., de Brito, J., & Saikia, N. (2012). Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate. Construction and Building Materials, 36, 196–204. https://doi.org/10.1016/j.conbuildmat.2012.02.098
  • Ferronato, N., & Torretta, V. (2019). Waste mismanagement in developing countries: A review of global issues. International Journal of Environmental Research and Public Health, 16(6), 1060. https://doi.org/10.3390/ijerph16061060
  • Fielding, K. S., van Kasteren, Y., Louis, W., McKenna, B., Russell, S., & Spinks, A. (2016). Using individual householder survey responses to predict household environmental outcomes: The cases of recycling and water conservation. Resources, Conservation and Recycling, 106, 90–97. https://doi.org/10.1016/j.resconrec.2015.11.009
  • Filella, M. (2015). Questions of size and numbers in environmental research on microplastics: methodological and conceptual aspects. Environmental Chemistry, 12(5), 527–538. https://doi.org/10.1071/EN15012
  • Fozer, D., Sziraky, F. Z., Racz, L., Nagy, T., Tarjani, A. J., Toth, A. J., Haaz, E., Benko, T., & Mizsey, P. (2017a). Life cycle, PESTLE and multi-criteria decision analysis of CCS process alternatives. Journal of Cleaner Production, 147, 75–85. https://doi.org/10.1016/j.jclepro.2017.01.056
  • Fozer, D., Valentinyi, N., Racz, L., & Mizsey, P. (2017b). Evaluation of microalgae-based biorefinery alternatives. Clean Technologies and Environmental Policy, 19(2), 501–515. https://doi.org/10.1007/s10098-016-1242-8
  • Francis, R. (Ed.). (2016). Recycling of polymers: methods, characterization and applications. John Wiley & Sons.
  • Gabbatiss, J. (2018). Plastic chemicals changing marine animals behaviour and leaving them vulnerable to attack study suggest. Retrieved March 3, 2020, from Independent: https://www.independent.co.uk/environment/plastic-pollution-ocean-animal-behaviour-microplastics-chemicals-study-research-a8654541.html
  • Gall, S. C., & Thompson, R. C. (2015). The impact of debris on marine life. Marine Pollution Bulletin, 92(1-2), 170–179. https://doi.org/10.1016/j.marpolbul.2014.12.041
  • Galloway, T. S. (2015). Micro-and nano-plastics and human health. In Marine anthropogenic litter (pp. 343–366). Springer.
  • Garcia, J. M., & Robertson, M. L. (2017). The future of plastics recycling. Science (New York, NY), 358(6365), 870–872. https://doi.org/10.1126/science.aaq0324
  • Gawande, A., Zamare, G., Renge, V. C., Tayde, S., & Bharsakale, G. (2012). An overview on waste plastic utilization in asphalting of roads. Journal of Engineering Research and Studies, 3(2), 1–5.
  • Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7), e1700782. https://doi.org/10.1126/sciadv.1700782
  • Ghanem, S. Y., Bowling, J., & Sun, Z., fiber reinforced self-consolidating concrete. (2021). Mechanical properties of hybrid syntehthic. Composites Part C: Open Access, 5, 100154.
  • Gilbert, M., (Ed). (2016). Chapter 1- Plastics materials: Introduction and historical development. In M. Gilbert (Ed.), Brydson’s plastics materials (8th ed., pp. 1–18). Butterworth-Heinemann. Retrieved from http://www.sciencedirect.com/article/pii/B9780323358248000013.
  • Godfrey, L. (2019). Waste plastic, the challenge facing developing countries—ban it, change it, collect it? Recycling, 4(1), 3. https://doi.org/10.3390/recycling4010003
  • Gouin, T., Avalos, J., Brunning, I., Brzuska, K., De Graaf, J., Kaumanns, J., … Thomas, J. (2015). Use of micro-plastic beads in cosmetic products in Europe and their estimated emissions to the North Sea environment. SOFW J, 141(4), 40–46.
  • Gray, H., Lattin, G. L., & Moore, C. J. (2012). Incidence, mass and variety of plastics ingested by Laysan (Phoebastria immutabilis) and Black-footed Albatrosses (P. nigripes) recovered as by-catch in the North Pacific Ocean. Marine Pollution Bulletin, 64(10), 2190–2192. https://doi.org/10.1016/j.marpolbul.2012.07.053
  • Gu, L., & Ozbakkaloglu, T. (2016). Use of recycled plastics in concrete: A critical review. Waste Management, 51, 19–42. https://doi.org/10.1016/j.wasman.2016.03.005
  • Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018). An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. Journal of Hazardous Materials, 344, 179–199. https://doi.org/10.1016/j.jhazmat.2017.10.014
  • Hale, R. C. (2017). Analytical challenges associated with the determination of microplastics in the environment. Analytical Methods, 9(9), 1326–1327. https://doi.org/10.1039/C7AY90015E
  • Hameed, A. M., & Ahmed, B. A. F. (2019). Employment the plastic waste to produce the light weight concrete. Energy Procedia, 157, 30–38. https://doi.org/10.1016/j.egypro.2018.11.160
  • Hamilton, L., Fiet, S., Kelso, M., Rubright, S., Bernhardt, C., Schaeffer, …. Muffett, C. (2020). Plastic & climate (p. 108). Center for International Environmental Law. Retrieved from http://www.ciel.org/plasticandclimate
  • Hamlet, C., Matte, T., & Mehta, S. (2020). Combating plastic and air pollution on earth day. Retrieved May 5, 2020, from Vital Strategies: https://medium.com/vital-strategies/combating-plastic-and-air-pollution-on-earth-day-d9c06f1ca219
  • Hammer, J., Kraak, M. H., & Parsons, J. R. (2012). Plastics in the marine environment: the dark side of a modern gift. In Reviews of environmental contamination and toxicology (pp. 1–44). Springer.
  • Hardesty, B. D., Good, T. P., & Wilcox, C. (2015). Novel methods, new results and science-based solutions to tackle marine debris impacts on wildlife. Ocean & Coastal Management, 115, 4–9. https://doi.org/10.1016/j.ocecoaman.2015.04.004
  • Harikrishna, K. S., Harikrishnan, M., Jai Ganesh, N., Jothi Kumar, S., & Sundari, M. (2018). Experimental study on partial replacement of plastic waste in bricks. International Journal for Scientific Research & Development, 6, 819–825.
  • Harun, H. A., Yunus, N. M., Rasul, R., Zainudin, A. Z., Zakaria, S. R. A., & Mohsin, A. (2019). Challenges in the implementation of zero waste concept in Johor Bahru city council. International Journal of Real Estate Studies, 13(1), 80–88.
  • Harvey, F. (2019). Animals and birds under increasing threat from plastic waste. Retrieved May 5, 2020, from The Guardian: https://www.theguardian.com/environment/2019/feb/04/animals-birds-plastic-waste-rspca.
  • Herberz, T., Barlow, C. Y., & Finkbeiner, M. (2020). Sustainability assessment of a single-use plastics ban. Sustainability, 12(9), 3746. https://doi.org/10.3390/su12093746
  • Hernandez, E. B., Nowack, B., & Mitrano, D. M. (2017). Polyester textiles as a source of microplastics from households: A mechanistic study to understand microfiber release during washing. Environmental Science & Technology, 51(12), 7036–7046. https://doi.org/10.1021/acs.est.7b01750
  • Hidalgo-Ruz, V., Gutow, L., Thompson, R. C., & Thiel, M. (2012). Microplastics in the marine environment: a review of the methods used for identification and quantification. Environmental Science & Technology, 46(6), 3060–3075. https://doi.org/10.1021/es2031505
  • Hiremath, P. M., & Shetty, S. (2014). Utilization of waste plastic in manufacturing of plastic soil bricks. International Journal of Technology Enhancements and Emerging Engineering Research, 2, 102–107.
  • Hirschmann, R. (2020). Value of construction work in Malaysia 2011-2019. Retrieved on December 9, 2020, from the Statistia: https:www.statista.com/statistics/665028/value-of-construction-work-malaysia/#:∼:text=In%202019%2c%20the%20value%20of,a%20bid%20to%20decrease%20debt.
  • Hopewell, J., Dvorak, R., & Kosior, E. (2009). Plastics recycling: challenges and opportunities. Philosophical Transactions of the Royal Society B: Biological Sciences, 364(1526), 2115–2126. https://doi.org/10.1098/rstb.2008.0311
  • Hunter, B. (2018). How a shortage of bricks could impact the construction industry. Retrieved 9 December, 2020, from Bricks Hunter: https://brickhunter.com/blog/how-a-shortage-of-bricks-could-impact-the-construction-industry
  • Hurley, R., Woodward, J., & Rothwell, J. J. (2018). Microplastic contamination of river beds significantly reduced by catchment-wide flooding. Nature Geoscience, 11(4), 251–257. https://doi.org/10.1038/s41561-018-0080-1
  • Ihesiulor, O. K., & Ugoamadi, C. C. (2011). Optimization of the development of a plastic recycling machine. Nigerian Journal of Technology, 30, 67–81.
  • Ingabire, D., Ntihemuka, F., Mugabo, G., Isabane, R. S., & Turatimana, T. (2018). Recycling High-Density Polyethylene (HDPE) into construction materials as a key step in plastic waste reduction: case of Kigali City. Rwanda Journal of Engineering. Science, Technology and Environment, 1(1).
  • Intan, S. K., & Santosa, S. (2019). Utilization of PTE and LDPE plastic waste and building material waste as bricks. Korean Journal of Materials Research, 29(10), 603–608. https://doi.org/10.3740/MRSK.2019.29.10.603
  • Isangedighi, I. A., David, G. S., & Obot, O. I. (2018). Plastic waste in the aquatic environment: impacts and management. Environment, 2, 1–31.
  • Islam, F. R., & Mamun, K. A. (2017). Possibilities and challenges of implementing renewable energy in the light of PESTLE & SWOT analyses for island countries. In Smart energy grid design for island countries (pp. 1–19). Springer.
  • Istrate, I. R., Galvez-Martos, J. L., & Dufour, J. (2021). The impact of incineration phase-out on municipal solid waste landfilling and life cycle environmental performance. Science of the Total Environment, 755, 142537. https://doi.org/10.1016/j.scitotenv.2020.142537
  • Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015). Marine pollution. Plastic waste inputs from land into the ocean. Science (New York, NY), 347(6223), 768–771. https://doi.org/10.1126/science.1260352
  • Jambeck, J., Hardesty, B. D., Brooks, A. L., Friend, T., Teleki, K., Fabres, J., Beaudoin, Y., Bamba, A., Francis, J., Ribbink, A. J., Baleta, T., Bouwman, H., Knox, J., & Wilcox, C. (2018). Challenges and emerging solutions to the land-based plastic waste issue in Africa. Marine Policy, 96, 256–263. https://doi.org/10.1016/j.marpol.2017.10.041
  • Jeswani, H., Krüger, C., Russ, M., Horlacher, M., Antony, F., Hann, S., & Azapagic, A. (2021). Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery. Science of the Total Environment, 769, 144483. https://doi.org/10.1016/j.scitotenv.2020.144483
  • Jia, L., Evans, S., & van der Linden, S. (2019). Motivating actions to mitigate plastic pollution. Nature Communications, 10(1), 1–3. https://doi.org/10.1038/s41467-019-12666-9
  • Jnr, A. K. L., Yunana, D., Kamsouloum, P., Webster, M., Wilson, D. C., & Cheeseman, C. (2018). Recycling waste plastics in developing countries: Use of low-density polyethylene water sachets to form plastic bonded sand blocks. Waste Management, 80, 112–118.
  • Junaid, A., & Jan, A. (2016). Effectiveness of waste polyethylene bags modified bitumen mixes and their comparative economical analysis. International Journal of Science and Engineering Research, 7, 1171–1177.
  • Kabir, E., Kaur, R., Lee, J., Kim, K. H., & Kwon, E. E. (2020). Prospects of biopolymer technology as an alternative option for non-degradable plastics and sustainable management of plastic wastes. Journal of Cleaner Production, 258, 120536. https://doi.org/10.1016/j.jclepro.2020.120536
  • Kaiser, J. (2010). The dirt on the ocean garbage patches. Science (New York, NY), 328(5985), 1506–1506. https://doi.org/10.1126/science.328.5985.1506
  • Kalianan, T., Fang, Y. X., & Abidin, Z. A. Z. (2020). Efforts towards zero single-use plastic in a private institution. Journal of Social Science Advanced Research, 1(2), 87–96.
  • Kamaruddin, M., Abdullah, M. M. A., Zawawi, M. H., & Zainol, M. R. R. A. (2017). Potential use of plastic waste as construction materials: recent progress and future prospect. In IOP Conference Series: Materials Science and Engineering (Vol. 267, No. 1, p. 012011). IOP Publishing Ltd.
  • Karleskint, G., Turner, R., & Small, J. (2012). Introduction to marine biology. Cengage Learning.
  • Kathe, V., Gangurde, A., & Pawar, A. (2015). Green concrete using plastic waste. Third International Conference on Sustainable Construction Materials and Technologies, 19, 214–216.
  • Khan, F., Ahmed, W., & Najmi, A. (2019). Understanding consumers’ behavior intentions towards dealing with the plastic waste: Perspective of a developing country. Resources, Conservation and Recycling, 142, 49–58. https://doi.org/10.1016/j.resconrec.2018.11.020
  • Khoonkari, M., Haghighi, A. H., Sefidbakht, Y., Shekoohi, K., & Ghaderian, A. (2015). Chemical recycling of PET wastes with different catalysts. International Journal of Polymer Science, 2015, 1–11. https://doi.org/10.1155/2015/124524
  • Klemeš, J. J., Fan, Y. V., & Jiang, P. (2020). Plastics: friends or foes? The circularity and plastic waste footprint. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,43, 1549–1565 .
  • Kosuth, M., Mason, S., Wattenberg, E., Tyree, C., & Morrison, D. (2017). Synthethic polymer contamination of global drinking water. Orb Media. Retrieved May 5, 2020, from https://orbmedia.org/stories/Invisibles_final_report
  • Laville, S. (2019). Single-use plastics a serious climate change hazard, study warns. Retrieved September 2020, 2020, from The Guardian: https://www.theguardian.com/environment/2019/may/15/single-use-plastics-a-serious-climate-change-hazard-study-warns
  • Law, K. L. (2017). Plastics in the marine environment. Annual Review of Marine Science, 9, 205–229. https://doi.org/10.1146/annurev-marine-010816-060409
  • Lawrence, M., Kiberu, F., Kyakula, M., & Batambuze, A. O. (2020). An assessment of impact construction activities on the environment in Uganda: A case study of Iganga Municipality. Journal of Construction Engineering and Project Management, 2(4) 20–24.
  • Lazarevic, D., Aoustin, E., Buclet, N., & Brandt, N. (2010). Plastic waste management in the context of a European recycling society: comparing results and uncertainties in a life cycle perspective. Resources, Conservation and Recycling, 55(2), 246–259. https://doi.org/10.1016/j.resconrec.2010.09.014
  • Leal Filho, W., Saari, U., Fedoruk, M., Iital, A., Moora, H., Klöga, M., & Voronova, V. (2019). An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe. Journal of Cleaner Production, 214, 550–558. https://doi.org/10.1016/j.jclepro.2018.12.256
  • Lebreton, L. C., Van Der Zwet, J., Damsteeg, J. W., Slat, B., Andrady, A., & Reisser, J. (2017). River plastic emissions to the world’s oceans. Nature Communications, 8(1), 1–10. https://doi.org/10.1038/ncomms15611
  • Lee, A., & Liew, M. S. (2020). Tertiary recycling of plastics waste: an analysis of feedstock, chemical and biological degradation methods. Journal of Material Cycles and Waste Management, 22(1), 1–12. https://doi.org/10.1007/s10163-019-00931-4
  • Lelchat, F., Dussauze, M., Lemaire, P., Theron, M., Toffin, L., & Le Floch, S. (2020). Measuring the biological impact of drilling waste on the deep seafloor: an experimental challenge. Journal of Hazardous Materials, 389, 122132. https://doi.org/10.1016/j.jhazmat.2020.122132
  • Liang, Y., Tan, Q., Song, Q., & Li, J. (2021). An analysis of the plastic waste trade and management in Asia. Waste Management, 119, 242–253. https://doi.org/10.1016/j.wasman.2020.09.049
  • Ling, Y. F., Zhang, P., Wang, J., & Shi, Y. (2020). Effect of sand size on mechanical performance of cement-based composite containing PVA fibers and nano-SiO2. Materials, 13(2), 325. https://doi.org/10.3390/ma13020325
  • Li, J., Qu, X., Su, L., Zhang, W., Yang, D., Kolandhasamy, P., Li, D., & Shi, H. (2016). Microplastics in mussels along the coastal waters of China. Environmental Pollution (Barking, Essex: 1987), 214, 177–184. https://doi.org/10.1016/j.envpol.2016.04.012
  • Li, J., Wu, G., & Xu, Z. (2015). Tribo-charging properties of waste plastic granules in process of tribo-electrostatic separation. Waste Management (New York, NY), 35, 36–41. https://doi.org/10.1016/j.wasman.2014.10.001
  • Long, R., Yang, J., Chen, H., Li, Q., Fang, W., & Wang, L. (2019). Co-evolutionary simulation study of multiple stakeholders in the take-out waste recycling industry chain. Journal of Environmental Management, 231, 701–713. https://doi.org/10.1016/j.jenvman.2018.10.061
  • Luangchroenrat, C., Intrachooto, S., Peansupap, V., & Sutthinarakorn, W. (2019). Factors influencing construction waste generation in building construction. Sustainability, 11, 2638.
  • Lusher, A. (2015). Microplastocs in the marine environment: distribution, interactions and effects. In M. Bergmann, L. Gutow, & M. Klages (Eds.), Marine anthropogenic Litter (pp. 245–307). Springer.
  • MPMA. Malaysian Plastic Manufacturers Assosiation. ( 2018). Last retrieved on 5 December 2020 from the https://mpma.org.my/M
  • Mageshwaran, A., Vino, S., Satish Kumar, C., Vijayakumar, M., & Praveen Kumar, T. (2018). Effective utilization of waste plastic with sand in addition with nylon grids in paver stones. International Journal of Current Engineering and Scientific Research, 5, 14–17.
  • Mahajan, P., Girase, D., & Lokhande, A. R. (2018). Plastic soil bricks substituiting traditional bricks. International Journal for Research in Applied Science and Engineering Technology, 6(1), 3380–3386. https://doi.org/10.22214/ijraset.2018.1470
  • Ma, Y., Huang, A., Cao, S., Sun, F., Wang, L., Guo, H., & Ji, R. (2016). Effects of nanoplastics and microplastics on toxicity, bioaccumulation, and environmental fate of phenanthrene in fresh water. Environmental Pollution (Barking, Essex : 1987), 219, 166–173. https://doi.org/10.1016/j.envpol.2016.10.061
  • Ma, Z. F., Ibrahim, Y. S., & Lee, Y. Y. (2020). Microplastic pollution and health and relevance to the Malaysia's roadmap to zero single-use plastics 2018-2030. The Malaysian Journal of Medical Sciences: MJMS, 27(3), 1–6. https://doi.org/10.21315/mjms2020.27.3.1
  • Maio, G., Olson, J., & Cheung, I. (2013). Attitudes in social behaviour. Personality and Social Psychology, 5, 275–304.
  • Maliki, A. B., Jahrin, M. E. B., Kamarulzaman, N. S. B., Ali, N. B. M., Azhar, N. I. B. M., & Chew, B. C. (2012). PESTLE analysis on Beichi technology- technology which turns plastic waste into fuels. At International Conference on Technology Management and Technopreneurship.
  • Mane, R., Rayewar, S., Katageri, S., & Patil, N. K. (2019). Use of plastic waste as partial replacement of aggregate in paver block. International Research Journal of Engineering and Technology, 6, 102–105.
  • Manjarekar, A. S., Gulpatil, D., Patil, V. P., Nikam, R. S., & Jeur, C. M. (2017). Utilization of plastic waste in foundry sand bricks. International Journal Research Applied Science Engineering Technology (IJRASET), 5(3), 977–982.
  • Manju, R., Sathya, S., & Sheema, K. (2017). Use of plastic waste in bituminous pavement. International Journal of ChemTech Research, 10(8), 804–811.
  • Mansour, A. M. H., & Ali, S. A. (2015). Reusing waste plastic bottles as an alternative sustainable building material. Energy for Sustainable Development, 24, 79–85. https://doi.org/10.1016/j.esd.2014.11.001
  • Marn, N., Jusup, M., Kooijman, S. A., & Klanjscek, T. (2020). Quantifying impacts of plastic debris on marine wildlife identifies ecological breakpoints. Ecology Letters, 23(10), 1479–1487. https://doi.org/10.1111/ele.13574
  • Marques, R. C., Simões, P., & Pinto, F. S. (2018). Tariff regulation in the waste sector: An unavoidable future. Waste Management (New York, NY), 78, 292–300. https://doi.org/10.1016/j.wasman.2018.05.028
  • Mastali, M., Dalvand, A., Sattarifard, A. R., Abdollahnejad, Z., & Illikainen, M. (2018). Characterisation and optimisation of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers. Composites Part B Engineering, 151, 186–200. https://doi.org/10.1016/j.compositesb.2018.06.021
  • Matuszczak, E., Komarowska, M. D., Debek, W., & Hermanowicz, A. (2019). The impact of bisphenol A on fertility, reproductive system, and development: a review of the literature. International Journal of Endocrinology, 2019, 4068717. https://doi.org/10.1155/2019/4068717
  • Merrington, A. (2017). Recycling of plastics. In Applied plastics engineering handbook (pp. 167–189). William Andrew Publishing.
  • Meys, R., Frick, F., Westhues, S., Sternberg, A., Klankermayer, J., & Bardow, A. (2020). Towards a circular economy for plastic packaging wastes–the environmental potential of chemical recycling. Resources, Conservation and Recycling, 162, 105010. https://doi.org/10.1016/j.resconrec.2020.105010
  • Michielssen, M. R., Michielssen, E. R., Ni, J., & Duhaime, M. B. (2016). Fate of microplastics and other small anthropogenic litter (SAL) in wastewater treatment plants depends on unit processes employed. Environmental Science: Water Research & Technology, 2(6), 1064–1073.
  • Milios, L., Christensen, L. H., McKinnon, D., Christensen, C., Rasch, M. K., & Eriksen, M. H. (2018). Plastic recycling in the Nordics: A value chain market analysis. Waste Management (New York, NY), 76, 180–189. https://doi.org/10.1016/j.wasman.2018.03.034
  • Milios, L., Esmailzadeh Davani, A., & Yu, Y. (2018). Sustainability impact assessment of increased plastic recycling and future pathways of plastic waste management in Sweden. Recycling, 3(3), 33. https://doi.org/10.3390/recycling3030033
  • Min, K., Cuiffi, J. D., & Mathers, R. T. (2020). Ranking environmental degradation trends of plastic marine debris based on physical properties and molecular structure. Nature Communications, 11(1), 1–11. https://doi.org/10.1038/s41467-020-14538-z
  • Ministry of Energy, Science, Technology, Environment and Climate (MESTECC). (2018). https://www.mestecc.gov.my/web/wp-content/uploads/2019/03/Malaysia-Roadmap-Towards-Zero-SingleUse-Plastics-2018-20302.pdf
  • Mintenig, S. M., Int-Veen, I., Löder, M. G., Primpke, S., & Gerdts, G. (2017). Identification of microplastic in effluents of waste water treatment plants using focal plane array-based micro-Fourier-transform infrared imaging. Water Research, 108, 365–372. https://doi.org/10.1016/j.watres.2016.11.015
  • Mir, A. H. (2015). Use of plastic waste in pavement construction: An example of creative waste management. International Organization of Scientific Research, 5(2), 57–67.
  • Misal, K. S., Zambani, S. S., Gawande, D. S., & Malekar, O. (2019). Use of PET plastic waste in manufacturing and testing of plastic sand bricks. International Journal for Research in Applied Science and Engineering Technology, 7(5), 1001–1006. https://doi.org/10.22214/ijraset.2019.5167
  • Mohammadinia, A., Wong, Y. C., Arulrajah, A., & Horpibulsuk, S. (2019). Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths. Construction and Building Materials, 197, 489–496. https://doi.org/10.1016/j.conbuildmat.2018.11.192
  • Mohan, C. G., Mathew, J., Kurian, J. N., Moolayil, J. T., & Sreekumar, C. (2016). Fabrication of plastic brick manufacturing machine and bricks analysis. International Journal for Innovative Research in Science and Technology, 2, 455–462.
  • Moharir, R. V., & Kumar, S. (2019). Challenges associated with plastic waste disposal and allied microbial routes for its effective degradation: a comprehensive review. Journal of Cleaner Production, 208, 65–76. https://doi.org/10.1016/j.jclepro.2018.10.059
  • Mondal, M. K., Bose, B. P., & Bansal, P. (2019). Recycling waste thermoplastic for energy efficient construction materials: An experimental investigation. Journal of Environmental Management, 240, 119–125. https://doi.org/10.1016/j.jenvman.2019.03.016
  • Mourshed, M., Masud, M. H., Rashid, F., & Joardder, M. U. H. (2017). Towards the effective plastic waste management in Bangladesh: a review. Environmental Science and Pollution Research International, 24(35), 27021–27046. https://doi.org/10.1007/s11356-017-0429-9
  • Mrowiec, B. (2017). Plastic pollutants in water environment. Ochrona Srodowiska i Zasobów Naturalnych, 28(4), 51–55. https://doi.org/10.1515/oszn-2017-0030
  • Nagy, A., & Kuti, R. (2016). The environmental Impact of plastic waste incineration. Academic and Applied Research in Military Science, 15, 231–237.
  • Nakatani, J., Konno, K., & Moriguchi, Y. (2017). Variability-based optimal design for robust plastic recycling systems. Resources, Conservation and Recycling, 116, 53–60. https://doi.org/10.1016/j.resconrec.2016.09.020
  • Nkwachukwu, O. I., Chima, C. H., Ikenna, A. O., & Albert, L. (2013). Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries. International Journal of Industrial Chemistry, 4(1), 34. https://doi.org/10.1186/2228-5547-4-34
  • Nodoushani, O., Stewart, C., & Kaur, M. (2016). Recycling and its effects on the environment. In Competition forum (Vol. 14, No. 1, p. 65). American Society for Competitiveness.
  • North, E. J., & Halden, R. U. (2013). Plastics and environmental health: the road ahead. Reviews on Environmental Health, 28(1), 1–8. https://doi.org/10.1515/reveh-2012-0030
  • Nursyamsi, N., Indrawan, I., & Ramadhan, P. (2019). The influence of the usage of Idpe plastic waste as fine aggregate in light concrete bricks [Paper presentation]. MATEC Web of Conferences (Vol. 258, p. 01006). EDP Sciences.
  • Nyathi, B., & Togo, C. A. (2020). Overview of legal and policy framework approaches for plastic bag waste management in African Countries. Journal of Environmental and Public Health, 2020, 1–8. https://doi.org/10.1155/2020/8892773
  • Ocean Crusaders. (n.d.). Plastics Ain’t So Fantastic. Retrieved 10 December, 2020, from the Ocean Crusaders: https://oceancrusaders.org/plastic-crusades/plastic-statistics/#:∼:text+Shoppers%20worldwide%20are%20using%20approximately,circumnavigate%20the%globe%204%2C200%20times.ide%
  • Oever, M., Molenveld, K., Zee, M., & Bos, H. (2017). Bio-based and biodegradable plastics-facts and figures. Wageningen Food & Biobased Research. https://doi.org/10.18174/408350
  • Ohemeng, E. A., & Ekolu, S. O. (2019). Strength prediction model for cement mortar made with waste LDPE plastic as fine aggregate. Journal of Sustainable Cement-Based Materials, 8(4), 228–243. https://doi.org/10.1080/21650373.2019.1625826
  • Ohemeng, E. A., Yalley, P. P., Dadzie, J., & Djokoto, S. D. (2014). Utilization of waste low density polyethylene in high strengths concrete pavement blocks production. Civil and Environmental Research, 6(5), 126–135.
  • Pacheco, E. B., Ronchetti, L. M., & Masanet, E. (2012). An overview of plastic recycling in Rio de Janeiro. Resources, Conservation and Recycling, 60, 140–146. https://doi.org/10.1016/j.resconrec.2011.12.010
  • Padanyi, J., & Foldi, L. (2014). Environmental responsibilities of military soldiers on have to be “Greener Berets. Ecology Management, 2, 48–55.
  • Palansooriya, K. N., Wijesekara, H., Bradney, L., Kumarathilaka, P., Bundschuh, J., Bolan, N. S., … Ok, Y. S. (2020). Characteristics of particulate plastics in terrestrial ecocystem. In N. S. Bolan, M. Kirkham, C. Halsband, D. Nugegoda, & Y. S. Ok (Eds.), Particulate plastics in terrestrial and aquatic environment (1st ed., pp. 107–124). CRC Press.
  • Palm, E., & Myrin, S. E. (2018). Mapping the plastics system and its sustainability challenges. Lund University.
  • Pan, D., Su, F., Liu, C., & Guo, Z. (2020). Research progress for plastic waste management and manufacture of value-added products. Advanced Composites and Hybrid Materials, 3(4), 443–461. https://doi.org/10.1007/s42114-020-00190-0
  • Panyakapo, P., & Panyakapo, M. (2008). Reuse of thermosetting plastic waste for lightweight concrete. Waste Management (New York, NY), 28(9), 1581–1588. https://doi.org/10.1016/j.wasman.2007.08.006
  • Pawar, S. S., & Bujone, S. A. (2017). Use of fly ash and plastic in paver block. International Journal of Engineering and Technology, 4, 1542–1547.
  • Pinto Da Costa, J., Rocha-Santos, T., & Duarte, A. C. (2020). The environmental impacts of plastics and micro-plastics use, waste and pollution: EU and national measures. Policy Department for Citizens’ Rights and Constitutional Affairs. European Parliament’s Committee on Petitions. Retrieved from https://www.europarl.europa.eu/RegData/etudes/STUD/2020/658279/IPOL_STU(2020)658279_EN.pdf
  • Plastic Insight. (2014). World per-capita consumption of PE, PP & PVC resins. Retrieved May 28, 2020, from Plastic Insight: http://www.plasticsinsight.com/world-per-capita-consumption-pe-pp-pvc-resins-2014/
  • Pocket Guide to Marine Debris. (2003). The ocean conservancy. Retrieved May 10, 2020, from Pocket Guide to Marine Debris: http://www.windowsonourwaters.org/biotimeline
  • Post, W., Susa, A., Blaauw, R., Molenveld, K., & Knoop, R. J. (2020). A review on the potential and limitations of recyclable thermosets for structural applications. Polymer Reviews, 60(2), 359–388. https://doi.org/10.1080/15583724.2019.1673406
  • Prem, K. K., & Gomathi, M. (2017). Production of construction bricks by partial replacement of waste plastics. IOSR Journal of Mechanical and Civil Engineerin, 14, 9–12.
  • Quoquab, F., & Mohammad, J. (2020). Striving for obtaining sustainability: Toil to adopt ‘no plastic bag use’behaviour. In CSR in an age of Isolationism. Emerald Publishing Limited.
  • Racz, L., Fozer, D., Nagy, T., Toth, A. J., Haaz, E., Tarjani, J. A., Andre, A., Selim, A., Valentinyi, N., Mika, L. T., Deak, C., & Mizsey, P. (2018). Extensive comparison of biodiesel production alternatives with life cycle, PESTLE and multi-criteria decision analyses. Clean Technologies and Environmental Policy, 20(9), 2013–2024. https://doi.org/10.1007/s10098-018-1527-1
  • Ragaert, K., Delva, L., & Van Geem, K. (2017). Mechanical and chemical recycling of solid plastic waste. Waste Management, 69, 24–58. https://doi.org/10.1016/j.wasman.2017.07.044
  • Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., & Nikbin, I. M. (2013). On the mechanical properties of concrete containing waste PET particles. Construction and Building Materials, 47, 1302–1308. https://doi.org/10.1016/j.conbuildmat.2013.06.041
  • Rai, B., Rushad, T., Kr, B., & Duggal, S. K. (2012). Study of waste plastic mix concrete with plasticizer. ISRN Civil Engineering, 2012, 1–5. https://doi.org/10.5402/2012/469272
  • Rainieri, S., & Barranco, A. (2019). Microplastics, a food safety issue? Trends in Food Science & Technology, 84, 55–57. https://doi.org/10.1016/j.tifs.2018.12.009
  • Rajmohan, K. V. S., Ramya, C., Viswanathan, M. R., & Varjani, S. (2019). Plastic pollutants: effective waste management for pollution control and abatement. Current Opinion in Environmental Science & Health, 12, 72–84. https://doi.org/10.1016/j.coesh.2019.08.006
  • Rajput, P. S., & Yadav, R. K. (2016). Use of plastic waste in bituminous road construction. IJSTE-International Journal of Science Technology & Engineering, 2(10), 509–513.
  • Rastogi, N., & Trivedi, M. K. (2016). PESTLE technique–a tool to identify external risks in construction projects. International Research Journal of Engineering and Technology (IRJET), 3(1), 384–388.
  • Reddy, S. K., Kumar, B. C., & Asadi, S. S. (2019). Utilization of low density polyethylene waste in the manufacturing of paver brick. International Journal of Recent Technology and Engineering, 7, 62–67.
  • Reddy, S. (2018). Plastic pollution affects sea life throughout the ocean. Retrieved May 11, 2020, from Pewtrusts: https://www.pewtrusts.org/en/research-and-analysis/articles/2018/09/24/plastic-pollution-affects-sea-life-throughout-the-ocean
  • Rensburg, M. L., Nkomo, S., & Dube, T. (2020). The ‘plastic waste era’; social perceptions towards single-use plastic consumption and impacts on the marine environment in Durban, South Africa. Applied Geography Journal, 114(1), 102132.
  • Richards, Z. T., & Beger, M. (2011). A quantification of the standing stock of macro-debris in Majuro lagoon and its effect on hard coral communities. Marine Pollution Bulletin, 62(8), 1693–1701. https://doi.org/10.1016/j.marpolbul.2011.06.003
  • Ritchie, H., & Roser, M. (2018). Plastic pollution. Retrieved June 7, 2019, from Our World in Data: https://ourworldindata.org/plastic-pollution
  • Rochman, C. M. (2015). The complex mixture, fate and toxicity of chemicals associated with plastic debris in the marine environment. In M. Bergmann, L. Gutow, & M. Klages (Eds.), Marine anthropogenic litter (pp. 117–140). Springer.
  • Rochman, C. M., Browne, M. A., Halpern, B. S., Hentschel, B. T., Hoh, E., Karapanagioti, H. K., Rios-Mendoza, L. M., Takada, H., Teh, S., & Thompson, R. C. (2013). Policy: Classify plastic waste as hazardous. Nature, 494(7436), 169–171. https://doi.org/10.1038/494169a
  • Rochman, C. M., Hentschel, B. T., & Teh, S. J. (2014). Long-term sorption of metals is similar among plastic types: implications for plastic debris in aquatic environments. PLOS One, 9(1), e85433. https://doi.org/10.1371/journal.pone.0085433
  • Rochman, C. M., Hoh, E., Hentschel, B. T., & Kaye, S. (2013). Long-term field measurement of sorption of organic contaminants to five types of plastic pellets: implications for plastic marine debris. Environmental Science & Technology, 47(3), 1646–1654. https://doi.org/10.1021/es303700s
  • Rodrigues, M. O., Abrantes, N., Gonçalves, F. J. M., Nogueira, H., Marques, J. C., & Gonçalves, A. M., M. (2019). Impacts of plastic products used in daily life on the environment and human health: What is known? Environmental Toxicology and Pharmacology, 72, 103239. https://doi.org/10.1016/j.etap.2019.103239
  • Rodríguez, A., Rodríguez, B., & Carrasco, M. N. (2012). High prevalence of parental delivery of plastic debris in Cory’s shearwaters (Calonectris diomedea). Marine Pollution Bulletin, 64(10), 2219–2223. https://doi.org/10.1016/j.marpolbul.2012.06.011
  • Rokdey, S. N., Naktode, P. L., & Nikhar, M. R. (2015). Use of plastic waste in road construction. International Journal of Computer Applications, 7, 27–29.
  • Saikia, N., & de Brito, J. (2014). Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate. Construction and Building Materials, 52, 236–244. https://doi.org/10.1016/j.conbuildmat.2013.11.049
  • Sarkar, D., & Pal, M. (2016). A laboratory study involving use of brick aggregate along with plastic modified bitumen in preparation of bituminous concrete for the roads of Tripura. ARPN Journal of Engineering and Applied Sciences, 11, 570–576.
  • Saxena, R., Siddique, S., Gupta, T., Sharma, R. K., & Chaudhary, S. (2018). Impact resistance and energy absorption capacity of concrete containing plastic waste. Construction and Building Materials, 176, 415–421. https://doi.org/10.1016/j.conbuildmat.2018.05.019
  • Schmaltz, E., Melvin, E. C., Diana, Z., Gunady, E. F., Rittschof, D., Somarelli, J. A., Virdin, J., & Dunphy-Daly, M. M. (2020). Plastic pollution solutions: emerging technologies to prevent and collectmarineplastic pollution. Environment International, 144, 106067. https://doi.org/10.1016/j.envint.2020.106067
  • Schyns, Z. O., & Shaver, M. P. (2021). Mechanical recycling of packaging plastics: A review. Macromolecular Rapid Communications, 42(3), e2000415. https://doi.org/10.1002/marc.202000415
  • Science for Environmental Policy. (2011). Plastic waste: ecological and human health impact. in depth report. Science for Environmental Policy, 1, 1-44.
  • Seuront, L. (2018). Microplastic leachates impair behavioural vigilance and predator avoidance in a temperate intertidal gastropod. Biology Letters, 14(11), 20180453. https://doi.org/10.1098/rsbl.2018.0453
  • Shah, R., Garg, H., Gandhi, P., Patel, R., & Daftardar, A. (2017). Study of plastic dust bricks made from plastic waste. International Journal of Mechanical and Production Engineering, 5, 120–123.
  • Shanmugavalli, B., Gowtham, K., Nalwin, P. J., & Moorthy, B. E. (2017). Reuse of plastic waste in paver blocks. International Journal of Engineering & Technology, 6(02), 313–316.
  • Sharuddin, S. D. A., Abnisa, F., Daud, W. M. A. W., & Aroua, M. K. (2018). Pyrolysis of plastic waste for liquid fuel production as prospective energy resource. In IOP Conference Series: Materials Science and Engineering, 334, 012001.
  • Shen, M., Huang, W., Chen, M., Song, B., Zeng, G., & Zhang, Y. (2020). (Micro) plastic crisis: Un-ignorable contribution to global greenhouse gas emissions and climate change. Journal of Cleaner Production, 254, 120138. https://doi.org/10.1016/j.jclepro.2020.120138
  • Shen, L., & Worrell, E. (2014). Plastic recycling. In Handbook of recycling (pp. 179–190). Elsevier.
  • Shiri, N. D., Kajava, P. V., Ranjan, H. V., Pais, N. L., & Naik, V. M. (2015). Processing of waste plastics into building materials using a plastic extruder and compression testing of plastic bricks. Journal of Mechanical Engineering and Automation, 5(3B), 39–42.
  • Shruti, V. C., Jonathan, M. P., Rodriguez-Espinosa, P. F., & Rodríguez-González, F. (2019). Microplastics in freshwater sediments of atoyac river basin, puebla city, Mexico. Science of the Total Environment, 654, 154–163. https://doi.org/10.1016/j.scitotenv.2018.11.054
  • Sidique, S. F., Lupi, F., & Joshi, S. V. (2010). The effects of behavior and attitudes on drop-off recycling activities. Resources, Conservation and Recycling, 54(3), 163–170. https://doi.org/10.1016/j.resconrec.2009.07.012
  • Simsek, B., Uygunoglu, T., Korucu, H., & Koxakerim, M. M. (2019). Performance of dioctly terephthalate conccrete. In Use of recycled plastics in eco-efficient concrete (pp. 249–267). Woodhead Publishing.
  • Singhal, A., & Netula, O. (2018). Utilization of plastic waste in manufacturing of plastic sand bricks. 3rd International Conference on New Frontiers of Engineering, Science, Management and Humanitie (pp. 206–210).
  • Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017). Recycling of plastic solid waste: A state of art review and future applications. Composites Part B: Engineering, 115, 409–422. https://doi.org/10.1016/j.compositesb.2016.09.013
  • Singh, P., & Sharma, V. P. (2016). Integrated plastic waste management: environmental and improved health approaches. Procedia Environmental Sciences, 35, 692–700. https://doi.org/10.1016/j.proenv.2016.07.068
  • Singh, L. B., Singh, L. G., Singh, P. B., & Thokchom, S. (2017). Manufacturing bricks from sand and waste plastics. International Journal of Engineering Technology, Management and Applied Sciences, 5, 426–428.
  • Sinha, V., Patel, M. R., & Patel, J. V. (2010). PET waste management by chemical recycling: a review. Journal of Polymers and the Environment, 18(1), 8–25. https://doi.org/10.1007/s10924-008-0106-7
  • Sobek, A., & Gustafsson, O. (2014). Deep water masses and sediments are main compartments for polychlorinated biphenyls in the Arctic Ocean. Environmental Science & Technology, 48(12), 6719–6725. https://doi.org/10.1021/es500736q
  • Solis, M., & Silveira, S. (2020). Technologies for chemical recycling of household plastics–A technical review and TRL assessment. Waste Management, 105, 128–138. https://doi.org/10.1016/j.wasman.2020.01.038
  • Sommerhuber, P. F., Welling, J., & Krause, A. (2015). Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites. Waste Management (New York, NY), 46, 76–85. https://doi.org/10.1016/j.wasman.2015.09.011
  • Srdjevic, Z., Bajcetic, R., & Srdjevic, B. (2012). Identifying the criteria set for multicriteria decision making based on SWOT/PESTLE analysis: a case study of reconstructing a water intake structure. Water Resources Management, 26(12), 3379–3393. https://doi.org/10.1007/s11269-012-0077-2
  • Sridhar, R., Sachithanandam, V., Mageswaran, T., Purvaja, R., Ramesh, R., Senthil Vel, A., & Thirunavukkarasu, E. (2016). A Political, Economic, Social, Technological, Legal and Environmental (PESTLE) approach for assessment of coastal zone management practice in India. International Review of Public Administration, 21(3), 216–232. https://doi.org/10.1080/12294659.2016.1237091
  • Sultan, M., Jaiswal, R., Jaiswal, R., Sahu, F. R., Devannand, A., & Sahu, M. (2020). Utilization of waste plastic in manufacturing of plastic sand bricks. International Journal of Innovations in Engineering and Science, 5, 38–42.
  • Sultana, A. K., & Prasad, K. B. (2012). Utilization of waste plastic as a strength modifier in surface course of flexible and rigid pavements. International Journal of Engineering Research and Application, 2, 1185–1191.
  • Sun, L., Hong, L., Dong, L., Fang, K., Ren, J., Geng, Y., … Liu, Z. (2017). Eco-benefits assessment on urban industrial symbiosis based on material flows analysis and emergy evaluation approach: A case of Liuzhou city, China. Resources, Conversation and Recycling, 119, 78–88.
  • Taaffe, J., O’Sullivan, S., Rahman, M. E., & Pakrashi, V. (2014). Experimental characterisation of Polyethylene Terephthalate (PET) bottle Eco-bricks. Materials & Design, 60, 50–56. https://doi.org/10.1016/j.matdes.2014.03.045
  • Talvitie, J., Heinonen, M., Pääkkönen, J. P., Vahtera, E., Mikola, A., Setälä, O., & Vahala, R. (2015). Do wastewater treatment plants act as a potential point source of microplastics? Preliminary study in the coastal Gulf of Finland, Baltic Sea. Water Science and Technology: A Journal of the International Association on Water Pollution Research, 72(9), 1495–1504. https://doi.org/10.2166/wst.2015.360
  • Tam, V. W. (2011). Rate of reusable and recyclable waste in construction. The Open Waste Management Journal, 4(1), 28–32.
  • Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., Ochi, D., Watanuki, Y., Moore, C., Viet, P. H., Tana, T. S., Prudente, M., Boonyatumanond, R., Zakaria, M. P., Akkhavong, K., … Takada, H. (2009). Transport and release of chemicals from plastics to the environment and to wildlife. Philosophical Transactions of the Royal Society B: Biological Sciences, 364(1526), 2027–2045. https://doi.org/10.1098/rstb.2008.0284
  • The ASEAN Post. (2019). Will ASEAN ban single-use plastic? Retrieved February 7, 2020, from https://theaseanpost.com/article/will-asean-ban-single-use-plastic.
  • The Business Times. (2019). Malaysia building materials to cost more by end-2019: Report. Retrieved December 11, 2020, from The Business Times: https://www.businesstimes.sg/asean-business/malaysian-building-materials-to-cost-more-by-end-2019-report.
  • The Freedom Group Incorporation Press Release. (2014). US demand for bricks, blocks, pavers on the rise. Retrieved December 9, 2020, from Concrete Construction: https://www.concreteconstruction.net/producers/us-demand-for-bricks-blocks-pavers-on-the-rise_o.
  • Thiounn, T., & Smith, R. C. (2020). Advances and approaches for chemical recycling of plastic waste. Journal of Polymer Science, 58(10), 1347–1364. https://doi.org/10.1002/pol.20190261
  • Thirugnanasambantham, N., Kumar, P. T., Sujithra, R., Selvaraman, R., & Bharathi, P. (2017). Manufacturing and testing of plastic sand bricks. International Journal of Science and Engineering Research, 5, 1150–1155.
  • Thompson, R. C., Moore, C. J., Vom Saal, F. S., & Swan, S. H. (2009b). Plastics, the environment and human health: current consensus and future trends. Philosophical Transactions of the Royal Society B: Biological Sciences, 364(1526), 2153–2166. https://doi.org/10.1098/rstb.2009.0053
  • Thompson, R. C., Swan, S. H., Moore, C. J., & Vom Saal, F. S. (2009a). Our plastic age. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences, 364(1526), 1973–1976. https://doi.org/10.1098/rstb.2009.0054
  • Tokyo Institute of Technology. (2020). Saving marine life: Novel method quantifies the effects of plastic on marine wildlife. Retrieved September 15, 2020, from Eurek Alert!: https://eurekalert.org/pub_releases/2020-08/tiot-sml083120.php
  • Torretta, V., Ferronato, N., Katsoyiannis, I. A., Tolkou, A. K., & Airoldi, M. (2016). Novel and conventional technologies for landfill leachates treatment: A review. Sustainability, 9(1), 9. https://doi.org/10.3390/su9010009
  • Union for Conservation for Nature (IUCN). (2018). Marine plastics. Retrieved May 5, 2020, from IUCN: https://www.iucn.org/sites/dev/files/marine_plastics_issues_brief_final_0.pdf.
  • United Nations Environment Programme (UNEP). (2015). Plastic debris in the oceans. In UNEP Yearbook 2014- Emerging issues in our global environment. United Nations Environment Programme.
  • United Nations Environment Programme (UNEP). (2016). G. Arendal: Marine Litter Vital Graphics. Nairobi and Arendal: United Nations Environment Programme and GRID-Arendal.
  • Van Cauwenberghe, L., Devriese, L., Galgani, F., Robbens, J., & Janssen, C. R. (2015). Microplastics in sediments: a review of techniques, occurrence and effects. Marine Environmental Research, 111, 5–17. https://doi.org/10.1016/j.marenvres.2015.06.007
  • van Sebille, E., Wilcox, C., Lebreton, L., Maximenko, N., Hardesty, B. D., van Franeker, J. A., Eriksen, M., Siegel, D., Galgani, F., & Law, K. L. (2015). A global inventory of small floating plastic debris. Environmental Research Letters, 10(12), 124006. https://doi.org/10.1088/1748-9326/10/12/124006
  • Vanitha, S., Natarajan, V., & Praba, M. (2015). Utilisation of waste plastics as a partial replacement of course aggregate in concrete blocks. Indian Journal of Science and Technology, 8(12), 1–6. https://doi.org/10.17485/ijst/2015/v8i12/54462
  • Vaverková, M. D. (2019). Landfill Impacts on the Environment. Geosciences, 9(10), 431.
  • Vegter, A. C., Barletta, M., Beck, C., Borrero, J., Burton, H., Campbell, M. L., Costa, M. F., Eriksen, M., Eriksson, C., Estrades, A., Gilardi, K. V. K., Hardesty, B. D., Ivar do Sul, J. A., Lavers, J. L., Lazar, B., Lebreton, L., Nichols, W. J., Ribic, C. A., Ryan, P. G., … Hamann, M. (2014). Global research priorities to mitigate plastic pollution impacts on marine wildlife. Endangered Species Research, 25(3), 225–247. https://doi.org/10.3354/esr00623
  • Velmurugan, V., Gokul Raj, R., & Harinisree, A. (2019). Rebuilding of plastic waste to pavement bricks. International Journal for Research in Applied Science and Engineering Technology, 7(4), 927–931. https://doi.org/10.22214/ijraset.2019.4165
  • Vishwakarma, A. (2020). Unsustainable management of plastic wastes in India: A threat to global warming and climate change. In Contemporary environmental issues and challenges in era of climate change (pp. 235–244). Springer.
  • Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., Harmelen, T., Wild, P., Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M. (2020). Beyond mechanical recycling: Giving new life to plastic waste. Angewandte Chemie International Edition, 59(36), 15402–15423. https://doi.org/10.1002/anie.201915651
  • Wahab, D. A., Abidin, A., & Azhari, C. H. (2007). Recycling trends in the plastics manufacturing and recycling companies in Malaysia. JAPSc, 7(7), 1030–1035.
  • Wahid, S. A., Rawi, S. M., & Desa, N. M. (2015). Utilization of plastic bottle waste in sand bricks. Journal of Basic and Applied Scientific Research, 5(1), 35–44.
  • Wang, Z., Huo, J., & Duan, Y. (2020). The impact of government incentives and penalties on willingness to recycle plastic waste: An evolutionary game theory perspective. Frontiers of Environmental Science & Engineering, 14(2), 1–12. https://doi.org/10.1007/s11783-019-1208-2
  • Wang, W., Themelis, N. J., Sun, K., Bourtsalas, A. C., Huang, Q., Zhang, Y., & Wu, Z. (2019). Current influence of China’s ban on plastic waste imports. Waste Disposal & Sustainable Energy, 1(1), 67–78. https://doi.org/10.1007/s42768-019-00005-z
  • Wanner, P. (2020). Plastic in agricultural soils–A global risk for groundwater systems and drinking water supplies?–A review. Chemosphere, 264, 128453.
  • Webb, H. K., Arnott, J., Crawford, R. J., & Ivanova, E. P. (2012). Plastic degradation and its environmental implications with special reference to poly (ethylene terephthalate). Polymers, 5(1), 1–18. https://doi.org/10.3390/polym5010001
  • Weinstein, J. E., Crocker, B. K., & Gray, A. D. (2016). From macroplastic to microplastic: Degradation of high‐density polyethylene, polypropylene, and polystyrene in a salt marsh habitat. Environmental Toxicology and Chemistry, 35(7), 1632–1640. https://doi.org/10.1002/etc.3432
  • Wilcox, C., Van Sebille, E., & Hardesty, B. D. (2015). Threat of plastic pollution to seabirds is global, pervasive, and increasing. Proceedings of the National Academy of Sciences, 112(38), 11899–11904. https://doi.org/10.1073/pnas.1502108112
  • Willis, K., Maureaud, C., Wilcox, C., & Hardesty, B. D. (2018). How successful are waste abatement campaigns and government policies at reducing plastic waste into the marine environment? Marine Policy, 96, 243–249. https://doi.org/10.1016/j.marpol.2017.11.037
  • Winton, D. J., Anderson, L. G., Rocliffe, S., & Loiselle, S. (2020). Macroplastic pollution in freshwater environments: Focusing public and policy action. Science of the Total Environment, 704, 135242. https://doi.org/10.1016/j.scitotenv.2019.135242
  • Woodall, L. C., Sanchez-Vidal, A., Canals, M., Paterson, G. L. J., Coppock, R., Sleight, V., Calafat, A., Rogers, A. D., Narayanaswamy, B. E., & Thompson, R. C. (2014). The deep sea is a major sink for microplastic debris. Royal Society Open Science, 1(4), 140317. https://doi.org/10.1098/rsos.140317
  • World Economic Forum. (2016). The new plastic economy: rethinking the future of plastics. In Industry Agenda REF 080116. World Economic Forum.
  • Worm, B., Lotze, H. K., Jubinville, I., Wilcox, C., & Jambeck, J. (2017). Plastic as a persistent marine pollutant. Annual Review of Environment and Resources, 42(1), 1–26. https://doi.org/10.1146/annurev-environ-102016-060700
  • Wright, S. L., & Kelly, F. J. (2017). Plastic and human health: a micro issue? Environmental Science & Technology, 51(12), 6634–6647. https://doi.org/10.1021/acs.est.7b00423
  • Wright, S. L., Thompson, R. C., & Galloway, T. S. (2013). The physical impacts of microplastics on marine organisms: a review. Environmental Pollution (Barking, Essex : 1987), 178, 483–492. https://doi.org/10.1016/j.envpol.2013.02.031
  • Yadav, V., Sherly, M. A., Ranjan, P., Tinoco, R. O., Boldrin, A., Damgaard, A., & Laurent, A. (2020). Framework for quantifying environmental losses of plastics from landfills. Resources, Conservation and Recycling, 161, 104914. https://doi.org/10.1016/j.resconrec.2020.104914
  • Yang, Z., Lü, F., Zhang, H., Wang, W., Shao, L., Ye, J., & He, P. (2021). Is incineration the terminator of plastics and microplastics? Journal of Hazardous Materials, 401, 123429. https://doi.org/10.1016/j.jhazmat.2020.123429
  • Yin, S., Tuladhar, R., Shi, F., Combe, M., Collister, T., & Sivakugan, N. (2015). Use of macro plastic fibres in concrete: A review. Construction and Building Materials, 93, 180–188. https://doi.org/10.1016/j.conbuildmat.2015.05.105
  • Zaman, A. U. (2013). Identification of waste management development drivers and potential emerging waste treatment technologies. International Journal of Environmental Science and Technology, 10(3), 455–464. https://doi.org/10.1007/s13762-013-0187-2
  • Zander, N. E., Gillan, M., & Lambeth, R. H. (2018). Recycled polyethylene terephthalate as a new FFF feedstock material. Additive Manufacturing, 21, 174–182. https://doi.org/10.1016/j.addma.2018.03.007
  • Zaroudi, M., Madandoust, R., & Kamran, A. (2020). Fresh and hardened properties of eco-friendly fiber reinforced self-consolidated concrete composed of polyolefin fiber and natural zeolite. Construction and Building Materials, 241, 118064. https://doi.org/10.1016/j.conbuildmat.2020.118064
  • Zhao, Y. B., Lv, X. D., & Ni, H. G. (2018). Solvent-based separation and recycling of waste plastics: A review. Chemosphere, 209, 707–720. https://doi.org/10.1016/j.chemosphere.2018.06.095
  • Zhou, A., Zhang, Y., Xie, S., Chen, Y., Li, X., Wang, J., & Zou, J. (2021). Microplastics and their potential effects on the aquaculture systems: a critical review. Reviews in Aquaculture, 13(1), 719–733. https://doi.org/10.1111/raq.12496
  • Ziajahromi, S., Neale, P. A., Rintoul, L., & Leusch, F. D. (2017). Wastewater treatment plants as a pathway for microplastics: development of a new approach to sample wastewater-based microplastics. Water Research, 112, 93–99. https://doi.org/10.1016/j.watres.2017.01.042
  • Ziv-Gal, A., & Flaws, J. A. (2016). Evidence for bisphenol A-induced female infertility: a review (2007-2016). Fertility and Sterility, 106(4), 827–856. https://doi.org/10.1016/j.fertnstert.2016.06.027

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.