Stability assessment of soil-nailed slopes using the homogenisation approach

References

• Abd, A., & Utili, S. (2017). Design of geosynthetic-reinforced slopes in cohesive backfills. Geotextiles and Geomembranes, 45(6), 627–641. https://doi.org/10.1016/j.geotexmem.2017.08.004
   Web of Science ®Google Scholar
• Alhajj Chehade, H., Dias, D., Sadek, M., Jenck, O., & Hage Chehade, F. (2021). Pseudo-static analysis of reinforced earth retaining walls. Acta Geotechnica, 16(7), 2275–2215. https://doi.org/10.1007/s11440-021-01148-2
   Web of Science ®Google Scholar
• Basudhar, P. K., Anubhav., & Lakshminarayana, M. R. (2017). Three-dimensional limit-equilibrium stability analyses of slopes and effect of inclusion of soil nails. International Journal of Geomechanics, 17(9), https://doi.org/10.1061/(ASCE)GM.1943-5622.0000932
   Google Scholar
• Chen, G.-H., Zou, J.-F., Pan, Q.-J., Qian, Z.-H., & Shi, H.-Y. (2020). Earthquake-induced slope displacements in heterogeneous soils with tensile strength cut-off. Computers and Geotechnics, 124(6), 103637. https://doi.org/10.1016/j.compgeo.2020.103637
   Google Scholar
• Cheng, Y. M., Li, L., & Chi, S. C. (2007). Performance studies on six heuristic global optimization methods in the location of critical slip surface. Computers and Geotechnics, 34(6), 462–484. https://doi.org/10.1016/j.compgeo.2007.01.004
   Web of Science ®Google Scholar
• Cheuk, C. Y., Ng, C. W. W., & Sun, H. W. (2005). Numerical experiments of soil nails in loose fill slopes subjected to rainfall infiltration effects. Computers and Geotechnics, 32(4), 290–303. https://doi.org/10.1016/j.compgeo.2005.02.005
   Web of Science ®Google Scholar
• de Buhan, P., Mangiavacchi, R., Nova, R., Pellegrini, G., & Salençon, J. (1989). Yield design of reinforced earth walls by a homogenization method. Géotechnique, 39(2), 189–201. https://doi.org/10.1680/geot.1989.39.2.189
   Web of Science ®Google Scholar
• Gao, Y. F., Zhang, F., Lei, G. H., & Li, D. Y. (2013). An extended limit analysis of three-dimensional slope stability. Géotechnique, 63(6), 518–524. https://doi.org/10.1680/geot.12.T.004
   Web of Science ®Google Scholar
• Gueguin, M., Hassen, G., & Buhan, P. D. (2015). Ultimate bearing capacity of a foundation reinforced by columns or cross trenches under inclined loads: A homogenization approach. International Journal for Numerical and Analytical Methods in Geomechanics, 39(3), 277–294. https://doi.org/10.1002/nag.2307
   Web of Science ®Google Scholar
• He, Y., Liu, Y., Hazarika, H., & Yuan, R. (2019). Stability analysis of seismic slopes with tensile strength cut-off. Computers and Geotechnics, 112, 245–256. https://doi.org/10.1016/j.compgeo.2019.04.029
   Web of Science ®Google Scholar
• He, S., Ouyang, C., & Yu, L. (2012). Seismic stability analysis of soil nail reinforced slope using kinematic approach of limit analysis. Environmental Earth Sciences, 66(1), 319–326. https://doi.org/10.1007/s12665-011-1241-3
   Web of Science ®Google Scholar
• Kennedy, J., & Eberhart, R. (1995). Particle swarm optimization. Proceedings of ICNN'95-International Conference on Neural Networks (IEEE), vol. 4, 1942–1948. https://doi.org/10.1109/ICNN.1995.488968
   Google Scholar
• Lin, H., Zhong, W., & Cao, P. (2016). Three-dimensional rock slope stability analysis considering the surface load distribution. European Journal of Environmental and Civil Engineering, 20(8), 877–898. https://doi.org/10.1080/19648189.2015.1084382
   Web of Science ®Google Scholar
• Li, X., Su, L., He, S., & Xu, J. (2016). Limit equilibrium analysis of seismic stability of slopes reinforced with a row of piles. International Journal for Numerical and Analytical Methods in Geomechanics, 40(8), 1241–1250. https://doi.org/10.1002/nag.2484
   Web of Science ®Google Scholar
• Li, Y., Tang, W., Wen, L., & Wang, J. (2020). Study on seismic failure probability of high earth-rock dam considering dam body deformation and slope stability. European Journal of Environmental and Civil Engineering, 1–15. https://doi.org/10.1080/19648189.2020.1828176
   Google Scholar
• Michalowski, R. L. (2013). Stability assessment of slopes with cracks using limit analysis. Canadian Geotechnical Journal, 50(10), 1011–1021. https://doi.org/10.1139/cgj-2012-0448
   Web of Science ®Google Scholar
• Michalowski, R. L., & Drescher, A. (2009). Three-dimensional stability of slopes and excavations. Géotechnique, 59(10), 839–850. https://doi.org/10.1680/geot.8.P.136
   Web of Science ®Google Scholar
• Nadukuru, S. S., & Michalowski, R. L. (2013). Three-dimensional displacement analysis of slopes subjected to seismic loads. Canadian Geotechnical Journal, 50(6), 650–661. https://doi.org/10.1139/cgj-2012-0223
   Web of Science ®Google Scholar
• Oliaei, M., & Tohidifar, H. (2020). Seismic stability of slopes reinforced with sleeved and unsleeved piles. European Journal of Environmental and Civil Engineering, 24(8), 1091–1119. https://doi.org/10.1080/19648189.2018.1447515
   Web of Science ®Google Scholar
• Pan, Q., & Dias, D. (2017). Safety factor assessment of a tunnel face reinforced by horizontal dowels. Engineering Structures, 142, 56–66. https://doi.org/10.1016/j.engstruct.2017.03.056
   Web of Science ®Google Scholar
• Peng, M., Sun, R., Chen, J.-F., Rajesh, S., Zhang, L.-M., & Yu, S.-B. (2020). System reliability analysis of geosynthetic reinforced soil slope considering local reinforcement failure. Computers and Geotechnics, 123, 103563. https://doi.org/10.1016/j.compgeo.2020.103563
   Web of Science ®Google Scholar
• Qian, Z., Zou, J., Pan, Q., & Dias, D. (2019). Safety factor calculations of a tunnel face reinforced with umbrella pipes: A comparison analysis. Engineering Structures, 199, 109639. https://doi.org/10.1016/j.engstruct.2019.109639
   Web of Science ®Google Scholar
• Qian, Z-h., Zou, J-f., Tian, J., & Pan, Q-j. (2020). Estimations of active and passive earth thrusts of non-homogeneous frictional soils using a discretisation technique. Computers and Geotechnics, 119, 103366. https://doi.org/10.1016/j.compgeo.2019.103366
   Web of Science ®Google Scholar
• Qin, C., Chian, S. C., & Du, S. (2020). Revisiting seismic slope stability: intermediatee or below-the-toe failure? Géotechnique, 70(1), 71–79. https://doi.org/10.1680/jgeot.18.T.001
   Web of Science ®Google Scholar
• Quang, T. S., Ghazi, H., & Patrick, B. D. (2009). A multiphase approach to the stability analysis of reinforced earth structures accounting for a soil-strip failure condition. Computers and Geotechnics, 36(3), 454–462. https://doi.org/10.1016/j.compgeo.2008.06.003
   Web of Science ®Google Scholar
• Rawat, S., & Gupta, A. K. (2016). An experimental and analytical study of slope stability by soil nailing. Electronic Journal of Geotechnical Engineering, 21(17), 5577–5597. Available at ejge.com.
   Web of Science ®Google Scholar
• Singh, S., & Shrivastava, A. K. (2017). Effect of soil nailing on stability of slopes. International Journal for Research in Applied Science and Engineering Technology, V(X), 752–763. https://doi.org/10.22214/ijraset.2017.10109
   Google Scholar
• Sun, Z., Li, J., Pan, Q., Dias, D., Li, S., & Hou, C. (2018). Discrete kinematic mechanism for nonhomogeneous slopes and its application. International Journal of Geomechanics, 18(12), 04018171. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001303
   Web of Science ®Google Scholar
• Wei, W. B., & Cheng, Y. M. (2009). Strength reduction analysis for slope reinforced with one row of piles. Computers and Geotechnics, 36(7), 1176–1185. https://doi.org/10.1016/j.compgeo.2009.05.004
   Web of Science ®Google Scholar
• Wei, W. B., & Cheng, Y. M. (2010). Soil nailed slope by strength reduction and limit equilibrium methods. Computers and Geotechnics, 37(5), 602–618. https://doi.org/10.1016/j.compgeo.2010.03.008
   Web of Science ®Google Scholar
• Wong, H., Trompille, V., & Dias, D. (2004). Extrusion analysis of a bolt-reinforced tunnel face with finite ground-bolt bond strength. Canadian Geotechnical Journal, 41(2), 326–341. https://doi.org/10.1139/t03-084
   Web of Science ®Google Scholar
• Xie, M., Zheng, J., Zhang, R., Cui, L., & Miao, C. (2020). Performance of a combined retaining wall structure supporting a high embankment on a steep slope: Case study. International Journal of Geomechanics, 20(6), 05020002. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001644
   Web of Science ®Google Scholar
• Xu, P., Hatami, K., & Jiang, G. (2020). Seismic rotational stability analysis of reinforced soil retaining walls. Computers and Geotechnics, 118, 103297. https://doi.org/10.1016/j.compgeo.2019.103297
   Web of Science ®Google Scholar
• Xu, J., & Yang, X. (2019). Seismic stability of 3D soil slope reinforced by geosynthetic with nonlinear failure criterion. Soil Dynamics and Earthquake Engineering, 118, 86–97. https://doi.org/10.1016/j.soildyn.2018.12.019
   Web of Science ®Google Scholar
• Yang, T., Zou, J. F., & Pan, Q. J. (2020). Three-dimensional seismic stability of slopes reinforced by soil nails. Computers and Geotechnics, 127, 103768. https://doi.org/10.1016/j.compgeo.2020.103768
   Web of Science ®Google Scholar
• Zhao, L., Yu, C., Li, L., An, A., Nie, Z., Peng, A., & Zuo, S. (2020). Rock slope reliability analysis using Barton-Bandis failure criterion with modified pseudo-dynamic approach. Soil Dynamics and Earthquake Engineering, 139, 106310. https://doi.org/10.1016/j.soildyn.2020.106310
   Web of Science ®Google Scholar