Improving the mechanical properties of recycled aggregate concrete with graphene

References

• Aslani, F., Ma, G., Yim Wan, D. L., & Muselin, G. (2018). Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules. Journal of Cleaner Production, 182, 53–566. https://doi.org/10.1016/j.jclepro.2018.02.074
   Google Scholar
• Barbudo, A., de Brito, J., Evangelista, L., Bravo, M., & Agrela, F. (2013). Influence of water-reducing admixtures on the mechanical performance of recycled concrete. Journal of Cleaner Production, 59, 3–98. https://doi.org/10.1016/j.jclepro.2013.06.022
   Google Scholar
• Beltran, M. G. (2014). Effect of cement addition on the properties of recycled concretes to reach control concretes strengths. Journal of Cleaner Production, 79, 124–133. https://doi.org/10.1016/j.jclepro.2014.05.053
   Web of Science ®Google Scholar
• Bolouri Bazaz, J., & Khayati, M. (2012). Properties and performance of concrete made with recycled low-quality crushed brick. Journal of Materials in Civil Engineering, 24(4), 30–338. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000385
   Google Scholar
• BS_EN12620. (2013). Aggregates for concrete. BSI Standards Publication.
   Google Scholar
• BS-EN12350-2. (2009). Testing fresh concrete - Part 2: Slump-test. BRITISH STANDARD PUBLICATIONS.
   Google Scholar
• BS-EN12390-13. (2013). Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression. BSI Standards Publication.
   Google Scholar
• BS-EN12390-3. (2009). Testing hardened concrete - Part 3: Compressive strength of test specimens. British Standard Publications.
   Google Scholar
• BS-EN12390-6. (2000). Testing hardened concrete—Part 6: Tensile splitting strength of test specimens. British Standard Publications.
   Google Scholar
• BS-EN933-1. (2012). Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method. BSI Standards Publication.
   Google Scholar
• Chen, Z. (2020). Mechanical properties and shrinkage behavior of concrete-containing graphene-oxide nanosheets. Materials, 13, 590. https://doi.org/10.3390/ma13030590
   PubMed Web of Science ®Google Scholar
• Crentsil, K. K. S., Brown, T., & Taylor, A. H. (2001). Performance of concrete made with commercially produced coarse recycled concrete aggregates. Cement and Concrete Research, 31(5), 07–712. https://doi.org/10.1016/S0008-8846(00)00476-2
   Google Scholar
• D. Nieto, P. D. (2018). Properties of self-compacting concrete prepared with coarse recycled concrete aggregates and different water: Cement ratios. American Society of Civil Engineers.
   Google Scholar
• Dalal, S. P., & Dalal, P. (2021). Experimental investigation on strength and durability of graphene nanoengineered concrete. Construction and Building Materials, 276, 22236. https://doi.org/10.1016/j.conbuildmat.2020.122236
   Google Scholar
• de Juan, M. S., & Gutiérrez, P. A. (2009). Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Construction and Building Materials, 23(2), 72–877. https://doi.org/10.1016/j.conbuildmat.2008.04.012
   Google Scholar
• Devi, S. C., & Khan, R. A. (2020). Effect of sulfate attack and carbonation in graphene oxide–reinforced concrete containing recycled concrete aggregate. American Society of Civil Engineers.
   Google Scholar
• Dilbas, H., Şimşek, M., & Çakır, Ö. (2014). An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume. Construction and Building Materials, 61, 0–59. https://doi.org/10.1016/j.conbuildmat.2014.02.057
   Google Scholar
• Dimov, D., Amit, I., Gorrie, O., Barnes, M. D., Townsend, N. J., Neves, A. I. S., Withers, F., Russo, S., & Craciun, M. F. (2018). Ultrahigh performance nanoengineered graphene-concrete composites for multifunctional applications. Advanced Functional Materials, 28(23), 705183. https://doi.org/10.1002/adfm.201705183
   Google Scholar
• Duan, Z. H., & Poon, C. S. (2014). Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars. Materials & Design, 58, 9–29. https://doi.org/10.1016/j.matdes.2014.01.044
   Google Scholar
• Eldin, N. N., & Senouci, A. B. (1994). Measurement and prediction of the strength of rubberized concrete. Cement and Concrete Composites, 16(4), 87–298. https://doi.org/10.1016/0958-9465(94)90041-8
   Google Scholar
• EN197-1, B. (2011). Composition, specifications and conformity criteria for common cements. BSI Standards Publication.
   Google Scholar
• Etxeberria, M., Vázquez, E., Marí, A., & Barra, M. (2007). Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research, 37(5), 35–742. https://doi.org/10.1016/j.cemconres.2007.02.002
   Google Scholar
• Fisher, C., & Werge, M. (2009). EU as a recycling society. European Topic Centre on Resource and Waste Management, ETC./SCP Working Paper 2/2009, 2009.
   Google Scholar
• Ganjian, E., Khorami, M., & Maghsoudi, A. A. (2009). Scrap-tyre-rubber replacement for aggregate and filler in concrete. Construction and Building Materials, 23(5), 1828–1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020
   Web of Science ®Google Scholar
• Gesoğlu, M., & Güneyisi, E. (2007). Strength development and chloride penetration in rubberized concretes with and without silica fume. Materials and Structures, 40(9), 53–964. https://doi.org/10.1617/s11527-007-9279-0
   Google Scholar
• González-Fonteboa, B., Martínez-Abella, F., Eiras-López, J., & Seara-Paz, S. (2011). Effect of recycled coarse aggregate on damage of recycled concrete. Materials and Structures, 44(10), 759–1771. https://doi.org/10.1617/s11527-011-9736-7
   Google Scholar
• Guo, Y. C., Zhang, J. H., Chen, G. M., & Xie, Z. H. (2014). Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures. Journal of Cleaner Production, 72, 93–203. https://doi.org/10.1016/j.jclepro.2014.02.036
   Google Scholar
• Henry, M., Yamashita, H., Nishimura, T., & Kato, Y. (2012). Properties and mechanical–environmental efficiency of concrete combining recycled rubber with waste materials. International Journal of Sustainable Engineering, 5(1), 6–75. https://doi.org/10.1080/19397038.2011.569584
   Google Scholar
• Hernández-Olivares, F., & Barluenga, G. (2004). Fire performance of recycled rubber-filled high-strength concrete. Cement and Concrete Research, 34(1), 09–117. https://doi.org/10.1016/S0008-8846(03)00253-9
   Google Scholar
• Ignjatović, I. S., Marinković, S. B., Mišković, Z. M., & Savić, A. R. (2013). Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading. Materials and Structures, 46(6), 045–1059. https://doi.org/10.1617/s11527-012-9952-9
   Google Scholar
• Jianlin, L., & Chen, S. (2019). Influence of graphene oxide on the mechanical properties, fracture toughness, and microhardness of recycled concrete. Nanomaterials, 9, 325. https://doi.org/10.3390/nano9030325
   Google Scholar
• Katz, A. (2003). Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cement and Concrete Research, 33(5), 03–711. https://doi.org/10.1016/S0008-8846(02)01033-5
   Google Scholar
• Khaloo, A. R., Dehestani, M., & Rahmatabadi, P. (2008). Mechanical properties of concrete containing a high volume of tire-rubber particles. Waste Management (New York, NY), 28(12), 2472–2482. https://doi.org/10.1016/j.wasman.2008.01.015
   PubMed Web of Science ®Google Scholar
• Kim, Y., Hanif, A., Usman, M., & Park, W. (2019). Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysis. Construction and Building Materials, 212, 49–163. https://doi.org/10.1016/j.conbuildmat.2019.03.265
   Google Scholar
• Kou, S. C., & Poon, C. S. (2012). Enhancing the durability properties of concrete prepared with coarse recycled aggregate. Construction and Building Materials, 35, 9–76. https://doi.org/10.1016/j.conbuildmat.2012.02.032
   Google Scholar
• Kwan, W. H., Ramli, M., Kam, K. J., & Sulieman, M. Z. (2011). Influence of the amount of recycled coarse aggregate in concrete design and durability properties. Construction and Building Materials, 26, 65–573. https://doi.org/10.1016/j.conbuildmat.2011.06.059
   Google Scholar
• Ling, T. C., Nor, H. M., & Lim, S. K. (2010). Using recycled waste tyres in concrete paving blocks. Proceedings of the Institution of Civil Engineers - Waste and Resource Management, 163(1), 7–45. https://doi.org/10.1680/warm.2010.163.1.37
   Google Scholar
• Lu, L., & Ouyang, D. (2017). Properties of cement mortar and ultra-high strength concrete incorporating graphene oxide nanosheets. Nanomaterials (Basel), 7, 187. https://doi.org/10.3390/nano7070187
   PubMedGoogle Scholar
• Ma, Q. W., & Yue, J. C. (2013). Effect on mechanical properties of rubberized concrete due to pretreatment of waste tire rubber with NaOH. Applied Mechanics and Materials, 357–360, 97–904. https://doi.org/10.4028/www.scientific.net/AMM.357-360.897
   Google Scholar
• Manzi, S., Mazzotti, C., & Bignozzi, M. C. (2013). Short and long-term behavior of structural concrete with recycled concrete aggregate. Cement and Concrete Composites, 37, 12–318. https://doi.org/10.1016/j.cemconcomp.2013.01.003
   Google Scholar
• Mehmet, E. ,Servet, Y. ,& Kelestemur, M. (2007). An investigation on ITZ microstructure of the concrete containing waste vehicles tire [Paper presentation]. Proceedings of 8th International Fracture Conference, Istanbul, Turkey.
   Google Scholar
• Mehta, P., & Meryman, H. (2009). Tools for reducing carbon emissions due to cement consumption. Structure Magazine, 11–15.
   Google Scholar
• Moustafa, A., & ElGawady, M. A. (2015). Mechanical properties of high strength concrete with scrap tire rubber. Construction and Building Materials, 93, 49–256. https://doi.org/10.1016/j.conbuildmat.2015.05.115
   Google Scholar
• Najim, K. B., & Hall, M. R. (2013). Workability and mechanical properties of crumb-rubber concrete. Proceedings of the Institution of Civil Engineers - Construction Materials, 166(1), 7–17. https://doi.org/10.1680/coma.11.00036
   Google Scholar
• Oikonomou, N. D. (2005). Recycled concrete aggregates. Cement and Concrete Composites, 27(2), 15–318. https://doi.org/10.1016/j.cemconcomp.2004.02.020.
   Google Scholar
• Onuaguluchi, O., & Panesar, D. K. (2014). Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume. Journal of Cleaner Production, 82, 25–131. https://doi.org/10.1016/j.jclepro.2014.06.068
   Google Scholar
• Ozbakkaloglu, T., Gholampour, A., & Xie, T. (2018). Mechanical and durability properties of recycled aggregate concrete: Effect of recycled aggregate properties and content. American Society of Civil Engineers.
   Google Scholar
• Poon, C. S., Shui, Z. H., Lam, L., Fok, H., & Kou, S. C. (2004). Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete. Cement and Concrete Research, 34(1), 1–36. https://doi.org/10.1016/S0008-8846(03)00186-8
   Google Scholar
• Shah, S. F. A., Naseer, A., Shah, A. A., & Ashraf, M. (2014). Evaluation of thermal and structural behavior of concrete containing rubber aggregate. Arabian Journal for Science and Engineering, 39(10), 919–6926. https://doi.org/10.1007/s13369-014-1294-1
   Google Scholar
• Shamsaei, E., de Souza, F. B., Yao, X., Benhelal, E., Akbari, A., & Duan, W. (2018). Graphene-based nanosheets for stronger and more durable concrete: A review. Construction and Building Materials, 183, 42–660. https://doi.org/10.1016/j.conbuildmat.2018.06.201
   Google Scholar
• Tam, V. W. Y., & Tam, C. M. (2008). Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc. Construction and Building Materials, 22(10), 068–2077. https://doi.org/10.1016/j.conbuildmat.2007.07.024
   Google Scholar
• Tam, V. W. Y., Gao, X. F., & Tam, C. M. (2005). Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cement and Concrete Research, 35(6), 195–1203. https://doi.org/10.1016/j.cemconres.2004.10.025
   Google Scholar
• Tamanna, K., T, M., Banthia, N., & Shahria Alam, M. (2020). Mechanical properties of rubberized concrete containing recycled concrete aggregate. ACI Materials Journal, 117, 169–180. https://doi.org/10.14359/51722409
   Google Scholar
• Thomas, C., Setién, J., Polanco, J. A., Alaejos, P., & Sánchez de Juan, M. (2013). Durability of recycled aggregate concrete. Construction and Building Materials, 40, 054–1065. https://doi.org/10.1016/j.conbuildmat.2012.11.106
   Google Scholar
• Toutanji, H. A. (1996). The use of rubber tire particles in concrete to replace mineral aggregates. Cement and Concrete Composites, 18(2), 35–139. https://doi.org/10.1016/0958-9465(95)00010-0
   Google Scholar
• WBCSD, Tire Industry Project. (2010). End-of-life tires: A framework for effective management systems. World Business Council for Sustainable Development.
   Google Scholar
• Wu, Y. Y., Que, L., Cui, Z., & Lambert, P. (2019). Physical properties of concrete containing graphene oxide nanosheets. Materials, 12(10), 707. https://doi.org/10.3390/ma12101707
   PubMedGoogle Scholar
• Yilmaz, A., & Degirmenci, N. (2009). Possibility of using waste tire rubber and fly ash with Portland cement as construction materials. Waste Management (New York, NY), 29(5), 1541–1546. https://doi.org/10.1016/j.wasman.2008.11.002
   PubMed Web of Science ®Google Scholar