Experimental & analytical behaviour and performance of structural joints retrofitted with woven wire mesh concreting under reversed cyclic loading

References

• Angelo Zanini, M., Toska, K., Faleschini, F., & Pellegrino, C. (2020). Seismic reliability of reinforced concrete bridges subject to environmental deterioration and strengthened with FRCM composites. Soil Dynamics and Earthquake Engineering, 136(2), 106224. https://doi.org/10.1016/j.soildyn.2020.106224
   Google Scholar
• ANSYS 2021-R1. (2021). ANSYS Fluent workbench tutorial guide 2021 R1.
   Google Scholar
• Ashok, V., Geetha, N., B., Rajkumar, S., & Pauline, T. (2022). Experimental investigations for thermal energy management by encapsulation of nano-enhanced bio phase change material in buildings, energy sources. Part A: Recovery, Utilization, and Environmental Effects, 44(2), 4165–4183. https://doi.org/10.1080/15567036.2021.1967517
   Web of Science ®Google Scholar
• Bahraq, A. A., Al-Osta, M. A., Khan, M. I., & Ahmad, S. (2021). Numerical and analytical modeling of seismic behavior of beam-column joints retrofitted with ultra-high performance fiber reinforced concrete. Structures, 32, 1986–2003. https://doi.org/10.1016/j.istruc.2021.04.004
   Web of Science ®Google Scholar
• Bansal, P. P., Kumar, M., & Dar, M. A. (2016). Retrofitting of exterior RC beam-column joints using ferrocement jackets. Earthquakes and Structures, 10(2), 313–328. https://doi.org/10.12989/eas.2016.10.2.313
   Web of Science ®Google Scholar
• Bindhu, K. R., & Jaya, K. P. (2010). Strength and behaviour of exterior beam column joints with diagonal cross bracing bars. Asian Journal of Civil Engineering (Building and Housing), 11(3), 397–410.
   Google Scholar
• Bousselham, A. (2010). State of research on seismic retrofit of RC beam-column joints with externally bonded FRP. Journal of Composites for Construction, 14(1), 49–61. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000049
   Web of Science ®Google Scholar
• Chetchotisak, P., Arjsri, E., & Teerawong, J. (2020). Strut-and-tie model for shear strength prediction of RC exterior beam–column joints under seismic loading. Bulletin of Earthquake Engineering, 18(4), 1525–1546. https://doi.org/10.1007/s10518-019-00756-4
   Web of Science ®Google Scholar
• Choi, H., & Kim, J. (2011). Progressive collapse-resisting capacity of RC beam–column sub-assemblage. Magazine of Concrete Research, 63(4), 297–310. https://doi.org/10.1680/macr.9.00170
   Web of Science ®Google Scholar
• Dalalbashi, A., Eslami, A., & Ronagh, H., R. (2012). Plastic hinge relocation in RC joints as an alternative method of retrofitting using FRP. Composite Structures, 94(8), 2433–2439. https://doi.org/10.1016/j.compstruct.2012.02.016
   Web of Science ®Google Scholar
• Dang, C. T., & Dinh, N. H. (2017). Experimental study on structural performance of RC exterior beam-column joints retrofitted by steel jacketing and haunch element under cyclic loading simulating earthquake excitation. Advances in Civil Engineering, 2017, 1–11. https://doi.org/10.1155/2017/9263460
   Web of Science ®Google Scholar
• Del Vecchio, C., Di Ludovico, M., Prota, A., & Manfredi, G. (2016). Modelling beam-column joints and FRP strengthening in the seismic performance assessment of RC existing frames. Composite Structures, 142, 107–116. https://doi.org/10.1016/j.compstruct.2016.01.077
   Web of Science ®Google Scholar
• Faleschini, F., Bragolusi, P., Zanini, M. A., Zampieri, P., & Pellegrino, C. (2017). Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete. Engineering Structures, 152, 335–347. https://doi.org/10.1016/j.engstruct.2017.09.022
   Web of Science ®Google Scholar
• Faleschini, F., Gonzalez-Libreros, J., Zanini, M. A., Hofer, L., Sneed, L., & Pellegrino, C. (2019). Repair of severely-damaged RC exterior beam-column joints with FRP and FRCM composites. Composite Structures, 207, 352–363. https://doi.org/10.1016/j.compstruct.2018.09.059
   Web of Science ®Google Scholar
• Faleschini, F., Hofer, L., Zanini, M. A., dalla Benetta, M., & Pellegrino, C. (2017). Experimental behavior of beam-column joints made with EAF concrete under cyclic loading. Engineering Structures, 139, 81–95. https://doi.org/10.1016/j.engstruct.2017.02.038
   Web of Science ®Google Scholar
• He, A., Cai, J., Chen, Q. J., Liu, X., Huang, P., & Tang, X. L. (2018). Seismic behaviour of steel-jacket retrofitted reinforced concrete columns with recycled aggregate concrete. Construction and Building Materials, 158, 624–639. https://doi.org/10.1016/j.conbuildmat.2017.10.053
   Web of Science ®Google Scholar
• Hofer, L., Zanini, M. A., Faleschini, F., Toska, K., & Pellegrino, C. (2021). Seismic behavior of precast reinforced concrete column-to-foundation grouted duct connections. Bulletin of Earthquake Engineering, 19(12), 5191–5218. https://doi.org/10.1007/s10518-021-01133-w
   Web of Science ®Google Scholar
• IS456 (2000). Indian standard plain and reinforced concrete code of practice. Bureau of Indian Standards.
   Google Scholar
• IS 10262 (2009). Guidelines for concrete mix proportioning. Bureau of Indian Standards.
   Google Scholar
• IS 13920. (1993). Indian standard ductile detailing of reinforced concrete structures subjected to seismic forces. Bureau of Indian Standards.
   Google Scholar
• IS: 1893–(2002). Code of practice for Criteria for earthquake resistant design of structures Part 1 General provisions and buildings. Bureau of Indian Standards.
   Google Scholar
• Istvan, H., & Zsolt, R. (2020). Finite element analysis of cast-in-situ RC frame corner joints under quasi-static and cyclic loading. Revista De La Construcción. Journal of Construction, 18(3), 579–594. https://doi.org/10.7764/RDLC.18.3.579
   Google Scholar
• Kakaletsis, D. J., David, K. N., & Karayannis, C. G. (2011). Effectiveness of some conventional seismic retrofitting techniques for bare and infilled R/C frames. Structural Engineering and Mechanics, 39(4), 499–520. https://doi.org/10.12989/sem.2011.39.4.499
   Web of Science ®Google Scholar
• Karayannis, C., Golias, E., & Kalogeropoulos, G. I. (2022). Influence of carbon fiber-reinforced ropes applied as external diagonal reinforcement on the shear deformation of RC joints. Fibers, 10(3), 28. https://doi.org/10.3390/fib10030028
   Web of Science ®Google Scholar
• Karayannis, C. G., & Golias, E. (2022). Full-scale experimental testing of RC beam-column joints strengthened using CFRP ropes as external reinforcement. Engineering Structures, 250, 113305. https://doi.org/10.1016/j.engstruct.2021.113305
   Web of Science ®Google Scholar
• Karayannis, C., & Emmanuil, G. (2018). Full scale tests of RC joints with minor to moderate seismic damage repaired using C-FRP sheets. Earthquakes and Structures, 15(6), 617–627. https://doi.org/10.12989/eas.2018.15.6.617
   Web of Science ®Google Scholar
• Karayannis, C. G., Chalioris, C. E., & Sirkelis, G. M. (2008). Local retrofit of exterior RC beam– column joints using thin RC jackets – an experimental study. Earthquake Engineering & Structural Dynamics, 37(5), 727–746. https://doi.org/10.1002/eqe.783
   Web of Science ®Google Scholar
• Lam, S. S. E., Wu, B., Wong, Y. L., Wang, Z. Y., Liu, Z. Q., & Li, C. S. (2003). Drift capacity of rectangular reinforced concrete columns with low lateral confinement and high-axial load. Journal of Structural Engineering, 129(6), 733–742. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(733)
   Web of Science ®Google Scholar
• Li, B., & Kai, Q. (2011). Seismic behavior of reinforced concrete interior beam-wide column joints repaired using FRP. Journal of Composites for Construction, 15(3), 327–338. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000163
   Web of Science ®Google Scholar
• Maheri, M. R., & Torabi, A. (2019). Retrofitting of external RCC Beam- column joints of an ordinary MRF through plastic hinge relocating using FRP Laminates. Structures, 22, 65–75. https://doi.org/10.1016/j.istruc.2019.08.004
   Web of Science ®Google Scholar
• Pauline, T., Janardhanan, G., Sangeetha, P., & Ashok, V. (2022). Retrofitting of exterior beam-column joint—A review. Lecture Notes in Civil Engineering, 179, 279–289. https://doi.org/10.1007/978-981-16-5041-3_21
   Google Scholar
• Sakthimurugan, K., & Baskar, K. (2021). Experimental investigation on RCC external beam-column joints retrofitted with basalt textile fabric under static loading. Composite Structures, 268, 114001. https://doi.org/10.1016/j.compstruct.2021.114001
   Web of Science ®Google Scholar
• Sasmal, S., & Nath, D. (2016). of performance of non-invasive upgrade strategy for beam–column sub-assemblages of poorly designed structures under seismic type loading. Earthquake Engineering & Structural Dynamics, 45(11), 1817–1835. http://dx.doi.org/10.1002/eqe.2730
   Web of Science ®Google Scholar
• Shafaei, J., & Adibi, M. (2021). Seismic performance evaluation of retrofitted RC beam-column joints reinforced by plain and deformed bars. European Journal of Environmental and Civil Engineering, 1–23. https://doi.org/10.1080/19648189.2021.1926334
   Google Scholar
• Shoukry, M. E., Ahmed, M., Tarabia, Mahmoud, & Abdelrahman, Z. (2022). Seismic retrofit of deficient exterior RC beam-column joints using steel plates and angles. Alexandria Engineering Journal, 61(4), 3147–3164. https://doi.org/10.1016/j.aej.2021.08.048
   Web of Science ®Google Scholar
• Sheela, S., & Anu Geetha, B. (2012). Studies on the performance of RC beam–column joints strengthened using different composite materials. Journal of the Institution of Engineers (India): Series A, 93(1), 63–71. https://doi.org/10.1007/s40030-012-0008-5
   Google Scholar
• Si, B., J., Z. G., Sun, Q. H., Ai, D. S., Wang., & Q. X., Wang. (2008). Experiments and simulation of flexural-shear dominated RC bridge piers under reversed cyclic loading [Paper presentation]. The 14th, World Conference on Earthquake Engineering, October 12–17 Beijing, China, https://www.iitk.ac.in/nicee/wcee/article/14_12-03-0027.PDF
   Google Scholar
• SP 34-(1987). Handbook on concrete reinforcement and detailing. Bureau of Indian Standards.
   Google Scholar
• Tsonos, A. G. (2014). An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method. Structural Monitoring and Maintenance, 1(3), 323–338. https://doi.org/10.12989/smm.2014.1.3.323
   Google Scholar
• Venkatesan, B., Ilangovan, R., Jayabalan, B., Mahendran, N., & Sakthieswaran, N. (2016). Finite Element Analysis (FEA) for the beam-column joint subjected to cyclic loading was performed using ANSYS. Circuits and Systems, 07(08), 1581–1597. https://doi.org/10.4236/cs.2016.78138
   Google Scholar
• Wang, G. L., Dai, J. G., & Bai, Y. L. (2019). Seismic retrofit of exterior RC beam-column joints with bonded CFRP reinforcement: An experimental study. Composite Structures, 224, 111018. https://doi.org/10.1016/j.compstruct.2019.111018
   Web of Science ®Google Scholar
• Young Ji Park, H., Alfredo, S., & Ang, F. (1985). Mechanistic seismic damage model for reinforced concrete. Journal of Structural Engineering, 111(4), 722–739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
   Web of Science ®Google Scholar
• Zhang, P., Hou, S., & Ou, J. (2016). A beam–column joint element for analysis of reinforced concrete frame structures. Engineering Structures, 118, 125–136. https://doi.org/10.1016/j.engstruct.2016.03.030
   Web of Science ®Google Scholar