Numerical evaluation on the decaying swirling flow in a multi-lobed swirl generator

References

• Akbarian, E., Najafi, B., Jafari, M., Ardabili, S. F., Shamshirband, S., & Chau, K. (2018). Mechanics experimental and computational fluid dynamics- based numerical simulation of using natural gas in a dual-fueled diesel engine. Engineering Applications of Computational Fluid Mechanics, 12(1), 517–534. 10.1080/19942060.2018.1472670
   Web of Science ®Google Scholar
• Alhajeri, H. M., Almutairi, A., Alenezi, A. H., & Gamil, A. A. A. (2019). Numerical investigation on heat transfer performance and flow characteristics in a roughened vortex chamber. Applied Thermal Engineering, 153(January), 58–68. https://doi.org/10.1016/j.applthermaleng.2019.02.071
   Web of Science ®Google Scholar
• ANSYS, Inc. (2011). Fluent 14.0 user' s guide. Fluent Incorporated.
   Google Scholar
• Ansys, Inc. (2016). Fluent 17.0 Theory Guide. Fluent Incorporated.
   Google Scholar
• Aydin, O., Avci, M., Markal, B., & Yusuf Yazici, M. (2014). An experimental study on the decaying swirl flow in a tube. International Communications in Heat and Mass Transfer, 55, 22–28. https://doi.org/10.1016/j.icheatmasstransfer.2014.04.012
   Web of Science ®Google Scholar
• Beér, J. M., & Chigier, N. A. (1972). Combustion aerodynamics. Academic Press.
   Google Scholar
• Blasius, H. (1913). Das aehnlichkeitsgesetz bei reibungsvorgängen in flüssigkeiten. In Mitteilungen über Forschungsarbeiten auf dem Gebiete des Ingenieurwesens (pp. 1–41). Springer.
   Google Scholar
• Cavazzuti, M., & Corticelli, M. A. (2017). Convective heat transfer of turbulent decaying swirled flows in concentric annular pipes. Applied Thermal Engineering, 120, 517–529. https://doi.org/10.1016/j.applthermaleng.2017.04.015
   Web of Science ®Google Scholar
• Dudley, B. (2019). BP statistical review of world energy. BP Statistical Review.
   Google Scholar
• Escue, A., & Cui, J. (2010). Comparison of turbulence models in simulating swirling pipe flows. Applied Mathematical Modelling, 34(10), 2840–2849. https://doi.org/10.1016/j.apm.2009.12.018
   Web of Science ®Google Scholar
• Fokeer, S., Lowndes, I. S., & Hargreaves, D. M. (2010). Numerical modelling of swirl flow induced by a three-lobed helical pipe. Chemical Engineering and Processing: Process Intensification, 49(5), 536–546. https://doi.org/10.1016/j.cep.2010.04.004
   Web of Science ®Google Scholar
• Fokeer, S., Lowndes, I., & Kingman, S. (2009). An experimental investigation of pneumatic swirl flow induced by a three lobed helical pipe. International Journal of Heat and Fluid Flow, 30(2), 369–379. https://doi.org/10.1016/j.ijheatfluidflow.2008.12.004
   Web of Science ®Google Scholar
• Gabl, R., & Righetti, M. (2018). Design criteria for a type of asymmetric orifice in a surge tank using CFD. Engineering Applications of Computational Fluid Mechanics, 12(1), 397–410. 10.1080/19942060.2018.1443837
   Web of Science ®Google Scholar
• Ganeshalingam, J. (2002). Swirl-induction for improved solid-liquid flow in pipes. University of Nottingham.
   Google Scholar
• Ghalandari, M., Bornassi, S., & Shamshirband, S. (2019). Mechanics Investigation of submerged structures ‘ flexibility on sloshing frequency using a boundary element method and finite element analysis. Engineering Applications of Computational Fluid Mechanics, 13(1), 519–528. 10.1080/19942060.2019.1619197
   Web of Science ®Google Scholar
• Gibson, M. M., & Launder, B. E. (1978). Ground effects on pressure fluctuations in the atmospheric boundary layer. Journal of Fluid Mechanics, 86(3), 491–511. 10.1017/S0022112078001251
   Web of Science ®Google Scholar
• Jafari, M., Dabiri, S., Farhadi, M., & Sedighi, K. (2017). Effects of a three-lobe swirl generator on the thermal and flow fields in a heat exchanging tube: An experimental and numerical approach. Energy Conversion and Management, 148, 1358–1371. https://doi.org/10.1016/j.enconman.2017.06.074
   Web of Science ®Google Scholar
• Jafari, M., Farhadi, M., & Sedighi, K. (2017a). An experimental study on the effects of a new swirl generator on thermal performance of a circular tube. International Communications in Heat and Mass Transfer, 87(August), 277–287. https://doi.org/10.1016/j.icheatmasstransfer.2017.07.016
   Web of Science ®Google Scholar
• Jafari, M., Farhadi, M., & Sedighi, K. (2017b). Thermal performance enhancement in a heat exchanging tube via a four-lobe swirl generator: An experimental and numerical approach. Applied Thermal Engineering, 124, 883–896. https://doi.org/10.1016/j.applthermaleng.2017.06.095
   Web of Science ®Google Scholar
• Launder, B. E., & Shimat, N. (1989). Second-moment closure for the near-wall sublayer: Development and application. AIAA Journal, 27(10), 1319–1325. 10.2514/3.10267
   Web of Science ®Google Scholar
• Li, G. (2016). Investigation of swirl pipe for improving cleaning efficiency in closed processing system. University of Nottingham.
   Google Scholar
• Li, G., Hall, P., Miles, N., & Wu, T. (2015). Improving the efficiency of “clean-in-place” procedures using a four-lobed swirl pipe: A numerical investigation. Computers and Fluids, 108, 116–128. https://doi.org/10.1016/j.compfluid.2014.11.032
   Web of Science ®Google Scholar
• Li, G., Miles, N. J., Wu, T., & Hall, P. (2017). Large eddy simulation and Reynolds-averaged Navier–stokes based modelling of geometrically induced swirl flows applied for the better understanding of clean-in-place procedures. Food and Bioproducts Processing, 104, 77–93. https://doi.org/10.1016/j.fbp.2017.05.001
   Web of Science ®Google Scholar
• Lin, C. H., Yen, C. H., & Ferng, Y. M. (2014). CFD investigating the flow characteristics in a triangular-pitch rod bundle using Reynolds stress turbulence model. Annals of Nuclear Energy, 65, 357–364. https://doi.org/10.1016/j.anucene.2013.11.023
   Web of Science ®Google Scholar
• Martemianov, S., & Okulov, V. L. (2004). On heat transfer enhancement in swirl pipe flows. International Journal of Heat and Mass Transfer, 47(10–11), 2379–2393. https://doi.org/10.1016/j.ijheatmasstransfer.2003.11.005
   Web of Science ®Google Scholar
• Najafi, A. F., Mousavian, S. M., & Amini, K. (2011). Numerical investigations on swirl intensity decay rate for turbulent swirling flow in a fixed pipe. International Journal of Mechanical Sciences, 53(10), 801–811. https://doi.org/10.1016/j.ijmecsci.2011.06.011
   Web of Science ®Google Scholar
• Omidi, M., Farhadi, M., & Rabienataj, A. A. (2018). Numerical study of heat transfer on using lobed cross sections in helical coil heat exchangers: Effect of physical and geometrical parameters. Energy Conversion and Management, 176(September), 236–245. https://doi.org/10.1016/j.enconman.2018.09.034
   Web of Science ®Google Scholar
• Osami Kitoh. (1991). Experimental study of turbulent swirling flow in a straight pipe. Journal of Fluid Mechanics, 225, 445–479. 10.1017/S0022112091002124
   Web of Science ®Google Scholar
• Petukhov, B. S. (1970). Heat transfer and friction in turbulent pipe flow with variable physical properties. Advances in Heat Transfer, 6(C), 503–564. https://doi.org/10.1016/S0065-2717(08)70153-9
   Google Scholar
• Salih, S. Q., Aldlemy, M. S., Rasani, M. R., Ariffin, K., Mohammad, T., Shah, Y., Ansari, N., Yaseen, Z. M., & Chau, K. (2019). Mechanics Thin and sharp edges bodies-fluid interaction simulation using cut-cell immersed boundary method. Engineering Applications of Computational Fluid Mechanics, 13(1), 860–877. 10.1080/19942060.2019.1652209
   Web of Science ®Google Scholar
• Reader-Harris, M. J. (1994). The decay of swirl in a pipe. International Journal of Heat and Fluid Flow, 15(3), 212–217. https://doi.org/10.1016/0142-727X(94)90040-X
   Web of Science ®Google Scholar
• Steenbergen, W., & Voskamp, J. (1998). The rate of decay of swirl in turbulent pipe flow. Flow Measurement and Instrumentation, 9(2), 67–78. https://doi.org/10.1016/S0955-5986(98)00016-8
   Web of Science ®Google Scholar
• Taheran, E., & Javaherdeh, K. (2019). Experimental investigation on the effect of inlet swirl generator on heat transfer and pressure drop of non-Newtonian nanofluid. Applied Thermal Engineering, 147(August 2018), 551–561. https://doi.org/10.1016/j.applthermaleng.2018.07.142
   Web of Science ®Google Scholar
• Tang, X., Dai, X., & Zhu, D. (2015). Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube. International Journal of Heat and Mass Transfer, 90, 523–541. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.068
   Web of Science ®Google Scholar
• Tonkin, R. J. J. (2005). Swirling pipeflow of non-Newtonian and particle-laden fluids. University of Nottingham.
   Google Scholar
• Zhou, J. W., Du, C. L., Liu, S. Y., & Liu, Y. (2016). Comparison of three types of swirling generators in coarse particle pneumatic conveying using CFD-DEM simulation. Powder Technology, 301, 1309–1320. https://doi.org/10.1016/j.powtec.2016.07.047
   Web of Science ®Google Scholar