References
- Ahmad, T., Danish, M., Kale, P., Geremew, B., Adeloju, S. B., Nizami, M., & Ayoub, M. (2019). Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations. Renewable Energy, 139, 1272–1280. https://doi.org/https://doi.org/10.1016/j.renene.2019.03.036
- Akbari, R., Ajabshirchi, Y., & Haghighat Shoar, F. (2020). Environmental analysis and evaluation of energy consumption using hybrid system for industrial unit in Mianeh city. Modares Mechanical Engineering, 20(9), 2363–2375. https://doi.org/https://doi.org/10.1001/1.10275940.1399.20.9.8.5
- Akbarian, E., & Najafi, B. (2019). A novel fuel containing glycerol triacetate additive, biodiesel and diesel blends to improve dual-fuelled diesel engines performance and exhaust emissions. Fuel, 236, 666–676. https://doi.org/https://doi.org/10.1016/j.fuel.2018.08.142
- Algayyim, S. J. M., Wandel, A. P., Yusaf, T., Al-Lwayzy, S., & Hamawand, I. (2018). Impact of butanol-acetone mixture as a fuel additive on diesel engine performance and emissions. Fuel, 227, 118–126. https://doi.org/https://doi.org/10.1016/j.fuel.2018.04.091
- Algayyim, S. J. M., Wandel, A. P., Yusaf, T., & Hamawand, I. (2017). The impact of n-butanol and iso-butanol as components of butanol-acetone (BA) mixture-diesel blend on spray, combustion characteristics, engine performance and emission in direct injection diesel engine. Energy, 140, 1074–1086. https://doi.org/https://doi.org/10.1016/j.energy.2017.09.044
- Algoufi, Y. T., Kabir, G., & Hameed, B. H. (2016). Synthesis of glycerol carbonate from biodiesel by-product glycerol over calcined dolomite. Journal of the Taiwan Institute of Chemical Engineers, 1–9. https://doi.org/https://doi.org/10.1016/j.jtice.2016.10.039.
- Alptekin, E. (2017). Evaluation of ethanol and isopropanol as additives with diesel fuel in a CRDI diesel engine. Fuel, 161–172. https://doi.org/https://doi.org/10.1016/j.fuel.2017.05.076
- Alvarez, M. G., Plíšková, M., Segarra, A. M., Medina, F., & Figueras, F. (2012). Synthesis of glycerol carbonates by transesterification of glycerol in a continuous system using supported hydrotalcites as catalysts. Applied Catalysis B: Environmental, 113–114, 212–220. https://doi.org/https://doi.org/10.1016/j.apcatb.2011.11.040
- Ambata, I., Srivastava, V., & Sillanpää, M. (2018). Recent advancement in biodiesel production methodologies using various feedstock: A review. Renewable and Sustainable Energy Reviews, 90, 356–369. https://doi.org/https://doi.org/10.1016/j.rser.2018.03.069
- Ampatzidis, C. D., Varka, E. M., & Karapantsios, T. D. (2014). Interfacial activity of amino acid-based glycerol ether surfactants and their performance in stabilizing O/W cosmetic emulsions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 460, 176–183. https://doi.org/https://doi.org/10.1016/j.colsurfa.2014.02.033
- Ancillotti, F., & Fattore, V. (1998). Oxygenate fuels: Market expansion and catalytic aspect of synthesis. Fuel Processing Technology, 57(3), 163–194. https://doi.org/https://doi.org/10.1016/S0378-3820(98)00081-2
- Anger, S., Trimis, D., Stelzner, B., Makhynya, Y., & Peil, S. (2011). Development of a porous burner unit for glycerine utilization from biodiesel production by supercritical water reforming. International Journal of Hydrogen Energy, 36(13), 7877–7883. https://doi.org/https://doi.org/10.1016/j.ijhydene.2011.01.058
- Ashok, S., Raj, S. M., Ko, Y., Sankaranarayanan, M., Zhou, S., Kumar, V., & Park, S. (2013). Effect of puuC overexpression and nitrate addition on glycerol metabolism and anaerobic3-hydroxypropionic acid production in recombinant Klebsiella pneumoniae ΔglpKΔdhaT. Metabolic Engineering, 15, 10–24. https://doi.org/https://doi.org/10.1016/j.ymben.2012.09.004
- Atabani, A. E., Mahlia, T. M. I., Anjum Badruddin, I., Masjuki, H. H., Chong, W. T., & Lee, K. T. (2013). Investigation of physical and chemical properties of potential edible and non-edible feedstocks for biodiesel production, a comparative analysis. Renewable and Sustainable Energy Reviews, 21, 749–755. https://doi.org/https://doi.org/10.1016/j.rser.2013.01.027
- Atmanli, A. (2016). Comparative analyses of diesel–waste oil biodiesel and propanol, n-butanol or 1-pentanol blends in a diesel engine. Fuel, 209–215. https://doi.org/https://doi.org/10.1016/j.fuel.2016.02.076
- Atmanli, A. (2020). Experimental comparison of biodiesel production performance of two different microalgae. Fuel, 278, Article 118311. https://doi.org/https://doi.org/10.1016/j.fuel.2020.118311
- Attia, A. M., Nour, M., & Nada, S. A. (2018). Study of Egyptian castor biodiesel-diesel fuel properties and diesel engine performance for a wide range of blending ratios and operating conditions for the sake of the optimal blending ratio. Energy Conversion and Management, 174, 364–377. https://doi.org/https://doi.org/10.1016/j.enconman.2018.08.016
- Auerbach, S. S., Mahler, J., Travlos, G. S., & Irwin, R. D. (2008). A comparative 90-day toxicity study of allyl acetate, allyl alcohol and acrolein. Toxicology, 253(1–3), 79–88. https://doi.org/https://doi.org/10.1016/j.tox.2008.08.014
- Ayoub, M., Khayoon, M. S., & Abdullah, A. Z. (2012). Synthesis of oxygenated fuel additives via the solventless etherification of glycerol. Bioresource Technology, 112, 308–312. https://doi.org/https://doi.org/10.1016/j.biortech.2012.02.103
- Barro, C., Parravicini, M., Boulouchos, K., & Liati, A. (2018). Neat polyoxymethylene dimethyl ether in a diesel engine; part 2: Exhaust emission analysis. Fuel, 234, 1414–1421. https://doi.org/https://doi.org/10.1016/j.fuel.2018.07.108
- Beatrice, C., Di Blasio, G., Guido, C., Cannilla, C., Bonura, G., & Frusteri, F. (2014). Mixture of glycerol ethers as diesel bio-derivable oxy-fuel: Impact on combustion and emissions of an automotive engine combustion system. Applied Energy, 132, 236–247. https://doi.org/https://doi.org/10.1016/j.apenergy.2014.07.006
- Behr, A., & Obendorf, L. (2002). Development of a process for the acid-catalyzed etherification of glycerine and isobutene forming glycerine tertiary butyl ethers. Engineering in Life Sciences, 2(7), 185–189. https://doi.org/https://doi.org/10.1002/1618-2863(20020709)2:7<185::AID-ELSC185>3.0.CO;2-4
- Benajes, J., Novella, R., Pastor, J. M., Hernández-López, A., & Kokjohn, S. L. (2018). Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl-ether. Fuel, 218, 127–139. https://doi.org/https://doi.org/10.1016/j.fuel.2018.01.020
- Bencheikh, K., Atabani, A. E., Shobana, S., Mohammed, M. N., Uğuz, G., Arpa, O., Kumar, G., Ayanoğlu, A., & Bokhari, A. (2019). Fuels properties, characterizations and engine and emission performance analyses of ternary waste cooking oil biodiesel–diesel–propanol blends. Sustainable Energy Technologies and Assessments, 35, 321–334. https://doi.org/https://doi.org/10.1016/j.seta.2019.08.007
- Bookong, P., Ruchirawat, S., & Boonyarattanakalin, S. (2015). Optimization of microwave-assisted. Etherification of glycerol to polyglycerols by sodium carbonate as catalyst. Chemical Engineering Journal. https://doi.org/https://doi.org/10.1016/j.cej.2015.04.033
- Boon-Anuwat, N. N., Kiatkittipong, W., Aiouache, F., & Assabumrungrat, S. (2015). Process design of continuous biodiesel production by reactive distillation: Comparison between homogeneous and heterogeneous catalysts. Chemical Engineering and Processing: Process Intensification, 92, 33–44. https://doi.org/https://doi.org/10.1016/j.cep.2015.03.025
- Bórawski, P., Bełdycka-Bórawska, A., Szymańska, E. J., Jankowski, K. J., Dubis, B., & Dunn, J. W. (2019). Development of renewable energy sources market and biofuels in the European Union. Journal of Cleaner Production, 228, 467–484. https://doi.org/https://doi.org/10.1016/j.jclepro.2019.04.242
- Bozkurt, O. D., Baglar, N., Celebi, S., & Uzun, A. (2019). Assessment of acid strength in sodium-exchanged resin catalysts: Consequences on glycerol etherification with isobutene in batch and flow reactors. Molecular Catalysis, 466, 1–12. https://doi.org/https://doi.org/10.1016/j.mcat.2018.12.027
- Bozkurt, O. D., Yılmaz, F., Bağlar, N., Çelebi, S., & Uzun, A. (2019). Compatibility of di-and tri-tert-butyl glycerol ethers with gasoline. Fuel, 255, Article 115767. https://doi.org/https://doi.org/10.1016/j.fuel.2019.115767
- Caetano, N. S., Silva, V. F., & Mata, T. M. (2012). Valorization of coffee grounds for biodiesel production. Chemical Engineering Transactions, 26.
- Cannilla, C., Bonura, G., Frusteri, L., & Frusteri, F. (2015). Batch reactor coupled with water permselective membrane: Study of glycerol etherification reaction with butanol. Chemical Engineering Journal, 282, 187–193. https://doi.org/https://doi.org/10.1016/j.cej.2015.03.013
- Carrero, A., & Pérez, Á. (2012). Advances in biodiesel quality control, characterisation and standards development. In Advances in biodiesel production (pp. 91–130). Woodhead Publishing, 2012.
- Changa, Y.-C., Lee, W.-J., Lin, S.-L., & Wang, L.-C. (2013). Green energy: Water-containing acetone–butanol–ethanol diesel blends fueled in diesel engines. Applied Energy, 109, 182–191. https://doi.org/https://doi.org/10.1016/j.apenergy.2013.03.086
- Chang, Y.-C., Lee, W.-J., Wu, T. S., Wu, C.-Y., & Chen, S.-J. (2013). Use of water containing acetone–butanol–ethanol for NOx-PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel. Energy, 64, 678–687. https://doi.org/https://doi.org/10.1016/j.energy.2013.10.077
- Christoph, R., Schmidt, B., Ssteinberner, U., Dilla, W., & Karinen, R. (2000). Glycerol, Ullmann's encyclopedia of industrial chemistry. Wiley and Sons.
- Das, B., & Mohanty, K. (2019). A green and facile production of catalysts from waste red mud for the one-pot synthesis of glycerol carbonate from glycerol. Journal of Environmental Chemical Engineering, 7(1), Article 102888. https://doi.org/https://doi.org/10.1016/j.jece.2019.102888
- Dasari, M., Kiatsimkul, P.-P., Sutterlin, W. R., & Suppes, G. J. (2005). Low pressure hydrogenolysis of glycerol to propylene glycol. Applied Catalysis A: General, 281(1–2), 225–231. https://doi.org/https://doi.org/10.1016/j.apcata.2004.11.033
- Decolatti, H. P., Dalla Costa, B. O., & Querini, C. A. (2014). Dehydration of glycerol to acrolein using H-ZSM5 zeolite modified by alkali treatment with NaOH. Microporous and Mesoporous Materials. https://doi.org/https://doi.org/10.1016/j.micromeso.2014.11.014
- Dhanasekaran, R., Ganesan, S., Rajesh Kumar, B., & Saravanan, S. (2018). Utilization of waste cooking oil in a light-duty DI diesel engine for cleaner emissions using bio-derived propanol. Fuel, 832–837. https://doi.org/https://doi.org/10.1016/j.fuel.2018.08.093
- Domínguez-Barroso, V., Herrera, C., Larrubia, M. Á., & Alemany, L. J. (2019). Coupling of glycerol-APR and in situ hydrodeoxygenation of fatty acid to produce hydrocarbons. Fuel Processing Technology, 190, 21–28. https://doi.org/https://doi.org/10.1016/j.fuproc.2019.03.011
- dos Santos, M. B., Andrade, H. M. C., & Mascarenhas, A. J. S. (2019). Oxidative dehydration of glycerol over alternative H,Fe-MCM-22 catalysts: Sustainable production of acrylic acid. Microporous and Mesoporous Materials. https://doi.org/https://doi.org/10.1016/j.micromeso.2019.01.016
- Dumitrescu, C. E., Mueller, C. J., & Kurtz, E. (2015). Investigation of a tripropylene-glycol monomethyl ether and diesel blend for soot-free combustion in an optical direct-injection diesel engine. Applied Thermal Engineering, 101, 639–646. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2015.12.068
- Elhaj, E., Wang, H., & Gu, Y. (2019). Functionalized quaternary ammonium salt ionic liquids (FQAILs) as an economic and efficient catalyst for synthesis of glycerol carbonate from glycerol and dimethyl carbonate. Molecular Catalysis, 468, 19–28. https://doi.org/https://doi.org/10.1016/j.mcat.2019.02.005
- Estevez, R., López, M. I., Jiménez-Sanchidrián, C., Luna, D., Romero-Salguero, F. J., & Bautista, F. M. (2016). Etherification of glycerol with tert-butyl alcohol over sulfonated hybrid silicas. Applied Catalysis A: General. https://doi.org/https://doi.org/10.1016/j.apcata.2016.08.019
- Favier, I., Pla, D., & Gómez, M. (2018). Metal-based nanoparticles dispersed in glycerol: An efficient approach for catalysis. Catalysis Today, 310, 98–106. https://doi.org/https://doi.org/10.1016/j.cattod.2017.06.026
- Freitas, I. C., Manfro, R. L., & Souza, M. M. (2018). Hydrogenolysis of glycerol to propylene glycol in continuous system without hydrogen addition over Cu-Ni catalysts. Applied Catalysis B: Environmental. https://doi.org/https://doi.org/10.1016/j.apcatb.2017.08.030
- Frusteri, F., Arena, F., Bonura, G., Cannilla, C., Spadaro, L., & Di Blasi, O. (2009). Catalytic etherification of glycerol by tert-butyl alcohol to produce oxygenated additives for diesel fuel. Applied Catalysis A: General, 367(1–2), 77–83. https://doi.org/https://doi.org/10.1016/j.apcata.2009.07.037
- Fu, J., Shu, J., Zhao, Z., Liu, J., & Zhou, F. (2017). Comparative analysis of soot formation processes of diesel and ABE (acetone-butanol-ethanol) based on CFD coupling with phenomenological soot model. Fuel, 203, 380–392. https://doi.org/https://doi.org/10.1016/j.fuel.2017.04.108
- Gao, X., Zhu, S., & Li, Y. (2015). Graphene oxide as a facile solid acid catalyst for the production of bioadditives from glycerol esterification. Catalysis Communications, 62, 48–51. https://doi.org/https://doi.org/10.1016/j.catcom.2015.01.007
- García-Sancho, C., Cecilia, J. A., Mérida-Robles, J. M., González, J. S., Moreno-Tost, R., Infantes-Molina, A., & Maireles-Torres, P. (2017). Effect of the treatment with H3PO4 on the catalytic activity of Nb2O5 supported on Zrdoped mesoporous silica catalyst. Case study: Glycerol dehydration. Applied Catalysis B, Environmental. https://doi.org/https://doi.org/10.1016/j.apcatb
- Garcia, A., Monsalve-Serrano, J., Villalta, D., Zubel, M., & Pischinger, S. (2018). Potential of 1-octanol and di-n-butyl ether (DNBE) to improve the performance and reduce the emissions of a direct injected compression ignition diesel engine. Energy Conversion and Management, 177, 563–571. https://doi.org/https://doi.org/10.1016/j.enconman.2018.10.009
- Gervais, M., Brocas, A.-L., Cendejas, G., Deffieux, A., & Carlotti, S. (2010). Synthesis of linear high molar mass glycidol-based polymers by monomer-activated anionic polymerization. Macromolecules, 43(4), 1778–1784. https://doi.org/https://doi.org/10.1021/ma902286a
- Ghazanfari, J., Najafi, B., Faizollahzadeh Ardabili, S., Shamshirband, S., & Jin, Z. (2017). Limiting factors for the use of palm oil biodiesel in a diesel engine in the context of the ASTM standard. Cogent Engineering, 4(1), Article 1411221. https://doi.org/https://doi.org/10.1080/23311916.2017.1411221
- Gheybi, H., Sattari, S., Bodaghi, A., Soleimani, K., Dadkhah, A., & Adeli, M. (2018). Polyglycerols. In Engineering of biomaterials for drug delivery systems (pp. 103–171). Woodhead Publishing.
- Go, A. W., Sutanto, S., Ong, L. K., Tran-Nguyen, P. L., Ismadji, S., & Ju, Y.-H. (2016). Developments in in-situ (trans) esterification for biodiesel production: A critical review. Renewable and Sustainable Energy Reviews, 60, 284–305. https://doi.org/https://doi.org/10.1016/j.rser.2016.01.070
- Gómez-Cuenca, F., Gómez-Marín, M., & Folgueras-Díaz, M. (2011). Effects of ethylene glycol ethers on diesel fuel properties and emissions in a diesel engine. Energy Conversion and Management, 3027–3033. https://doi.org/https://doi.org/10.1016/j.enconman.2011.04.017
- Gómez-Cuenca, F., Gómez-Marín, M., & Folgueras-Díaz, M. B. (2013). The influence of propylene glycol ethers on base diesel properties and emissions from a diesel engine. Energy Conversion and Management, 741–747. https://doi.org/https://doi.org/10.1016/j.enconman.2013.07.012
- Goncalves, M., Castro, C. S., Oliveira, L. C., & Carvalho, W. A. (2015). Green acid catalyst obtained from industrial wastes for glycerol etherification. Fuel Processing Technology, 138, 695–703. https://doi.org/https://doi.org/10.1016/j.fuproc.2015.07.010
- Gonzalez-Arellano, C., Grau-Atienza, A., Serrano, E., Romero, A. A., Garcia-Martinez, J., & Luque, R. (2015). The role of mesoporosity and Si/Al ratio in the catalytic etherification of glycerol with benzyl alcohol using ZSM-5 zeolites. Journal of Molecular Catalysis A: Chemical, 406, 40–45. https://doi.org/https://doi.org/10.1016/j.molcata.2015.05.011
- Haghighat Shoar, F., & Najafi, B. (2021). Investigating energy efficiency, economic performance, and emission of the diesel engine using natural gas with a combination of biodiesel B5 and B20 in diesel fuel. Modares Mechanical Engineering, 21(3), 143–161. https://doi.org/https://doi.org/10.1001/1.10275940.1399.21.3.18.6
- Han, K., Pang, B., Ma, X., Chen, H., Song, G., & Ni, Z. (2017). An experimental study of the burning characteristics of acetone–butanol–ethanol and diesel blend droplets. Energy, 139, 853–861. https://doi.org/https://doi.org/10.1016/j.energy.2017.08.037
- Hill, J., Nelson, E., Tilman, D., Polasky, S., & Tiffany, D. (2006). Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels. Proceedings of the National Academy of Sciences, 103(30), 11206–11210. https://doi.org/https://doi.org/10.1073/pnas.0604600103
- Hongwei, S. W., Yang, H., Hu, J., Shen, D., Zhang, H., & Xiao, R. (2017). The miscibility of hydrogenated bio-oil with diesel and its applicability test in diesel engine: A surrogate (ethylene glycol) study. Fuel Processing Technology, 161, 162–168. https://doi.org/https://doi.org/10.1016/j.fuproc.2017.03.022
- Hosseinzadeh-Bandbafha, H., Tabatabaei, M., Aghbashlo, M., Khanali, M., & Demirbas, A. (2018). A comprehensive review on the environmental impacts of diesel/biodiesel additives. Energy Conversion and Management, 174, 579–614. https://doi.org/https://doi.org/10.1016/j.enconman.2018.08.050
- Hu, K., Wang, H., Liu, Y., & Yang, C. (2015). KNO3/CaO as cost-effective heterogeneous catalyst for the synthesis 3 of glycerol carbonate from glycerol and dimethyl carbonate. Journal of Industrial and Engineering Chemistry, 28, 334–343. https://doi.org/https://doi.org/10.1016/j.jiec.2015.03.012
- Ibrahim, A. (2016). Investigating the effect of using diethyl ether as a fuel additive on diesel engine performance and combustion. Applied Thermal Engineering, 853–862. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2016.07.061
- Ibrahim, A. (2018). An experimental study on using diethyl ether in a diesel engine operated with diesel-biodiesel fuel blend. Engineering Science and Technology, an International Journal, 1024–1033. https://doi.org/https://doi.org/10.1016/j.jestch.2018.07.004
- Imtenan, S., Masjuki, H. H., Varman, M., Rizwanul Fattah, I. M., Sajjad, H., & Arbab, M. I. (2015). Effect of n-butanol and diethyl ether as oxygenated additives on combustion–emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel–Jatropha biodiesel blend. Energy Conversion and Management, 94, 84–94. https://doi.org/https://doi.org/10.1016/j.enconman.2015.01.047
- Ishak, Z. I., Sairi, N. A., Alias, Y., Aroua, M. K. T., & Yusoff, R. (2016). Production of glycerol carbonate from glycerol with aid of ionic liquid as catalyst. Chemical Engineering Journal. https://doi.org/https://doi.org/10.1016/j.cej.2016.03.104
- Izquierdo, J. F., Iniesta, E., Outón, P. R., & Izquierdo, M. (2017). Experimental study of glycerol etherification with C5 olefins to produce biodiesel additives. Fuel Processing Technology, 160, 1–7. https://doi.org/https://doi.org/10.1016/j.fuproc.2017.02.011
- Izquierdo, J. F., Montiel, M., Palés, I., Outón, P. R., Galán, M., Jutglar, L., Villarrubia, M., Izquierdo, M., Hermo, M. P., & Ariza, X. (2012). Fuel additives from glycerol etherification with light olefins: State of the art. Renewable and Sustainable Energy Reviews, 16(9), 6717–6724. https://doi.org/https://doi.org/10.1016/j.rser.2012.08.005
- Jamróz-Piegza, M., Utrata-Wesołek, A., Trzebicka, B., & Dworak, A. (2006). Hydrophobic modification of high molar mass polyglycidol to thermosensitive polymers. European Polymer Journal, 42(10), 2497–2506. https://doi.org/https://doi.org/10.1016/j.eurpolymj.2006.04.017
- Jaworski, M. A., Rodríguez Vega, S., Siri, G. J., Casella, M. L., Romero Salvador, A., & Santos López, A. (2015). Glycerol etherification with benzyl alcohol over Sulfated Zirconia catalysts. Applied Catalysis A: General, 505, 36–43. https://doi.org/https://doi.org/10.1016/j.apcata.2015.04.027
- Jeevanantham, A. K., Nanthagopal, K., Ashok, B., Al-Muhtaseb, A. H., Thiyagarajan, S., Geo, V. E., Ong, H. C., & Samuel, K. J. (2019). Impact of addition of two ether additives with high speed diesel- Calophyllum inophyllum biodiesel blends on NOx reduction in CI engine. Energy, 185, 39–54. https://doi.org/https://doi.org/10.1016/j.energy.2019.07.013
- Judge, K. (1988). Organisation for Economic Co-operation and Development (OECD), financing and delivering health care: A comparative analysis of OECD countries, social policy studies no. 4, OECD, Paris, 1987. Journal of Social Policy, 17(4), 547–548. https://doi.org/https://doi.org/10.1017/S0047279400017050
- Kakoee, A., & Gharehghani, A. (2019). Comparative study of hydrogen addition effects on the natural-gas/diesel and natural-gas/dimethyl-ether reactivity controlled compression ignition mode of operation. Energy Conversion and Management, 196, 92–104. https://doi.org/https://doi.org/10.1016/j.enconman.2019.05.113
- Karam, A., Villandier, N., Delample, M., Koerkamp, C. K., Douliez, J.-P., Granet, R., Krausz, P., Barrault, J., & Jérôme, F. (2008). Rational design of sugar-based-surfactant combined catalysts for promoting glycerol as a solvent. Chemistry – A European Journal, 14(33), 10196–10200. https://doi.org/https://doi.org/10.1002/chem.200801495
- Karimi, P., Najafi, B., Ardabili, S. F., Mesri-Gundoshmian, T., Ariyanfar, L., & Haghighatshoar, F. (2020). Ethyl ester production from Iranian bitter almond (BAO) oil to improve the performance and emissions of OM457 diesel engine. Renewable Energy Focus, 33, 16–22. https://doi.org/https://doi.org/10.1016/j.ref.2020.02.001
- Karimmaslak, H., Najafi, B., Band, S. S., Ardabili, S., Haghighat-Shoar, F., & Mosavi, A. (2021). Optimization of performance and emission of compression ignition engine fueled with propylene glycol and biodiesel–diesel blends using artificial intelligence method of ANN-GA-RSM. Engineering Applications of Computational Fluid Mechanics, 15(1), 413–425. https://doi.org/https://doi.org/10.1080/19942060.2021.1880970
- Karmaker, A. K., Rahman, M. M., Hossain, M. A., & Ahmed, M. R. (2019). Exploration and corrective measures of greenhouse gas emission from fossil fuel power stations for Bangladesh. Journal of Cleaner Production, 244, 118645. https://doi.org/https://doi.org/10.1016/j.jclepro.2019.118645
- Katryniok, B., Paul, S., Capron, M., & Dumeignil, F. (2009). Towards the sustainable production of acrolein by glycerol dehydration. ChemSusChem: Chemistry & Sustainability Energy & Materials, 2(8), 719–730. https://doi.org/https://doi.org/10.1002/cssc.200900134
- Kiatkittipong, W., Intaracharoen, P., Laosiripojana, N., Chaisuk, C., Praserthdam, P., & Assabumrungrat, S. (2011). Glycerol ethers synthesis from glycerol etherification with tert-butyl alcohol in reactive distillation. Computers and Chemical Engineering, 35(10), 2034–2043. https://doi.org/https://doi.org/10.1016/j.compchemeng.2011.01.016
- Kim, S. C., Kim, Y. H., Lee, H., Yoon, D. Y., & Song, B. K. (2007). Lipase-catalyzed synthesis of glycerol carbonate from renewable glycerol and dimethyl carbonate through transesterification. Journal of Molecular Catalysis B: Enzymatic, 49(1–4), 75–78. https://doi.org/https://doi.org/10.1016/j.molcatb.2007.08.007
- Klein, B. C., Bonomi, A., & Maciel Filho, R. (2018). Integration of microalgae production with industrial biofuel facilities: A critical review. Renewable and Sustainable Energy Reviews, 82, 1376–1392. https://doi.org/https://doi.org/10.1016/j.rser.2017.04.063
- Klepacova, K., Mravec, D., Kaszonyi, A., & Bajus, M. (2007). Etherification of glycerol and ethylene glycol by isobutylene. Applied Catalysis A: General, 328(1), 1–13. https://doi.org/https://doi.org/10.1016/j.apcata.2007.03.031
- Knothe, G. (2006). Analyzing biodiesel: Standards and other methods. Journal of the American Oil Chemists’ Society, 83(10), 823–833. https://doi.org/https://doi.org/10.1007/s11746-006-5033-y
- Krishnamoorthi, M., & Malayalamurthi, R. (2017a). Availability analysis, performance, combustion and emission behavior of bael oil - diesel - diethyl ether blends in a variable compression ratio diesel engine. Renewable Energy, 119, 235–252. https://doi.org/https://doi.org/10.1016/j.renene.2017.12.015
- Krishnamoorthi, M., & Malayalamurthi, R. (2017b). Experimental investigation on performance, emission behavior and exergy analysis of a variable compression ratio engine fueled with diesel-aegle marmelos oil-diethyl ether blends. Energy, 128, 312–328. https://doi.org/https://doi.org/10.1016/j.energy.2017.04.038
- Krishnamoorthi, M., Malayalamurthi, R., & Sakthivel, R. (2019). Optimization of compression ignition engine fueled with diesel – chaulmoogra oil – diethyl ether blend with engine parameters and exhaust gas recirculation. Renewable Energy, 579–602. https://doi.org/https://doi.org/10.1016/j.renene.2018.11.062
- Lago, C. D., Decolatti, H. P., Tonutti, L. G., Dalla Costa, B. O., & Querini, C. A. (2018). Gas phase glycerol dehydration over H-ZSM-5 zeolite modified by alkaline treatment with Na2CO3. Journal of Catalysis, 366, 16–27. https://doi.org/https://doi.org/10.1016/j.jcat.2018.07.036
- Lee, T. H., Li, G., & Lee, T. (2019). Effects of isopropanol-butanol-ethanol and diesel fuel blends on combustion characteristics in a constant volume chamber. Fuel, 254, 115613. https://doi.org/https://doi.org/10.1016/j.fuel.2019.06.021
- Lemos, C. O. T., Rade, L. L., Barrozo, M. A. d. S., Cardozo-Filho, L., & Hori, C. E. (2018). Study of glycerol etherification with ethanol in fixed bed reactor under high pressure. Fuel Processing Technology, 178, 1–6. https://doi.org/https://doi.org/10.1016/j.fuproc.2018.05.015
- Lertlukkanasuk, N., Phiyanalinmat, S., Kiatkittipong, W., Arpornwichanop, A., Aiouache, F., & Assabumrungrat, S. (2013). Reactive distillation for synthesis of glycerol carbonate via glycerolysis of urea. Chemical Engineering and Processing: Process Intensification, 70, 103–109. https://doi.org/https://doi.org/10.1016/j.cep.2013.05.001
- Lewis, P., Frey, H. C., & Rasdorf, W. (2009). Development and use of emissions inventories for construction vehicles. Transportation Research Record, 2123(1), 46–53. https://doi.org/https://doi.org/10.3141/2123-06
- Li, G., Lee, T. H., Liu, Z., Lee, C. F., & Zhang, C. (2019). Effects of injection strategies on combustion and emission characteristics of a common-rail diesel engine fueled with isopropanol-butanol-ethanol and diesel blends. Renewable Energy, 130, 677–686. https://doi.org/https://doi.org/10.1016/j.renene.2018.06.099
- Li, G., Liu, Z., Lee, T. H., Lee, C. F., & Zhang, C. (2018). Effects of dilute gas on combustion and emission characteristics of a common-rail diesel engine fueled with isopropanol-butanol-ethanol and diesel blends. Energy Conversion and Management, 373–381. https://doi.org/https://doi.org/10.1016/j.enconman.2018.03.073
- Li, J., & Wang, T. (2011). Chemical equilibrium of glycerol carbonate synthesis from glycerol. The Journal of Chemical Thermodynamics, 43(5), 731–736. https://doi.org/https://doi.org/10.1016/j.jct.2010.12.013
- Li, X., & Zhang, Y. (2016). Xidative dehydration of glycerol to acrylic acid over vanadium-substituted cesium salts of keggin-type heteropolyacids. ACS Catalysis, 6(5), 2785–2791. https://doi.org/https://doi.org/10.1021/acscatal.6b00213
- Liu, J., Daoutidis, P., & Yang, B. (2016). Process design and optimization for etherification of glycerol with isobutene. Chemical Engineering Science, 144, 326–335. https://doi.org/https://doi.org/10.1016/j.ces.2016.01.055
- Liu, J., Sun, P., Huang, H., Meng, J., & Yao, X. (2017). Experimental investigation on performance, combustion and emission characteristics of a common-rail diesel engine fueled with polyoxymethylene dimethyl ethers-diesel blends. Applied Energy, 202, 527–536. https://doi.org/https://doi.org/10.1016/j.apenergy.2017.05.166
- Liu, H., Wang, Z., Wang, J., He, X., Zheng, Y., Tang, Q., & Wang, J. (2015). Performance, combustion and emission characteristics of a diesel engine fueled with polyoxymethylene dimethyl ethers (PODE3-4)/diesel blends. Energy, 88, 793–800. https://doi.org/https://doi.org/10.1016/j.energy.2015.05.088
- Liu, H., Wang, Z., Zhang, J., Wang, J., & Shuai, S. (2017). Study on combustion and emission characteristics of polyoxymethylene dimethyl ethers/diesel blends in light-duty and heavy-duty diesel engines. Applied Energy, 185, 1393–1402. https://doi.org/https://doi.org/10.1016/j.apenergy.2015.10.183
- Luo, J., Zhang, Y., Zhang, Q., Liu, J., & Wang, J. (2017). Evaluation of sooting tendency of acetone–butanol–ethanol (ABE) fuels blended with diesel fuel. Fuel, 209, 394–401. https://doi.org/https://doi.org/10.1016/j.fuel.2017.08.019
- Miranda, C., Urresta, J., Cruchade, H., Tran, A., Benghalem, M., Astafan, A., Gaudin, P., Daou, T. J., Ramírez, A., Pouilloux, Y., Sachse, A., & Pinard, L. (2018). Exploring the impact of zeolite porous voids in liquid phase reactions: The case of glycerol etherification by tert-butyl alcohol. Journal of Catalysis, 365, 249–260. https://doi.org/https://doi.org/10.1016/j.jcat.2018.07.009
- Mittelbach, M. (2009). Process technologies for biodiesel production. In W. Soetart & E. J. Vandamme (Eds.), Biofuels (pp. 77–93). John Wiley & Sons.
- Mofijur, M., Rasul, M. G., Hassan, N. M. S., & Nabi, M. N. (2019). Recent development in the production of third generation biodiesel from microalgae. Energy Procedia, 156, 53–58. https://doi.org/https://doi.org/10.1016/j.egypro.2018.11.088
- Monteiro, M. R., Kugelmeier, C. L., Pinheiro, R. S., Batalha, M. O., & da Silva César, A. (2018). Glycerol from biodiesel production: Technological paths for sustainability. Renewable and Sustainable Energy Reviews, 88, 109–122. https://doi.org/https://doi.org/10.1016/j.rser.2018.02.019
- Najafi, B., Faizollahzadeh Ardabili, S., Shamshirband, S., Chau, K.-W., & Rabczuk, T. (2018). Application of ANNs, ANFIS and RSM to estimating and optimizing the parameters that affect the yield and cost of biodiesel production. Engineering Applications of Computational Fluid Mechanics, 12(1), 611–624. https://doi.org/https://doi.org/10.1080/19942060.2018.1502688
- Najafi, B., Haghighatshoar, F., Ardabili, S., Band, S., Chau, K. W., & Mosavi, A. (2021). Effects of low-level hydroxy as a gaseous additive on performance and emission characteristics of a dual fuel diesel engine fueled by diesel/biodiesel blends. Engineering Applications of Computational Fluid Mechanics, 15(1), 236–250. https://doi.org/https://doi.org/10.1080/19942060.2021.1871960
- Narkhede, N., & Patel, A. (2016). Sustainable valorisation of glycerol via acetalization as well as carboxylation reactions over silicotungstates anchored to zeolite hrmbeta. Applied Catalysis A: General. https://doi.org/https://doi.org/10.1016/j.apcata.2016.02.010
- Neves, T. M., Fernandes, J. O., Lião, L. M., da Silva, E. D., da Rosa, C. A., & Mortola, V. B. (2018). Glycerol dehydration over micro- and mesoporous ZSM-5 synthesized from a one-step method. Microporous and Mesoporous Materials, 275, 244–252. https://doi.org/https://doi.org/10.1016/j.micromeso.2018.09.006
- Nomanbhay, S., Hussein, R., & Ong, M. Y. (2018). Sustainability of biodiesel production in Malaysia by production of bio-oil from crude glycerol using microwave pyrolysis: A review. Green Chemistry Letters and Reviews, 11(2), 135–157. https://doi.org/https://doi.org/10.1080/17518253.2018.1444795
- Noor, C. M., Noor, M. M., & Mamat, R. (2018). Biodiesel as alternative fuel for marine diesel engine applications: A review. Renewable and Sustainable Energy Reviews, 94, 127–142. https://doi.org/https://doi.org/10.1016/j.rser.2018.05.031
- Noureddini, H. (2001). Process for producing biodiesel fuel with reduced viscosity and a cloud point below 32°F (US Pat. 6174501).
- Okoye, P. U., Abdullah, A. Z., & Hameed, B. H. (2017). A review on recent developments and progress in the kinetics and deactivation of catalytic acetylation of glycerol – a byproduct of biodiesel. Renewable and Sustainable Energy Reviews, 74, 387–401. https://doi.org/https://doi.org/10.1016/j.rser.2017.02.017
- Okoye, P. U., & Hameed, B. H. (2016). Review on recent progress in catalytic carboxylation and acetylation of glycerol as a byproduct of biodiesel production. Renewable and Sustainable Energy Reviews, 53, 558–574. https://doi.org/https://doi.org/10.1016/j.rser.2015.08.064
- Organisation for Economic Co-operation and Development (OECD), & Food and Agriculture Organization of the United Nations (FAO). (2018). Chapter 8. Fish and seafood. In OECD/FAO agricultural outlook 2018–2027 (pp. 175–190).
- Pan, C., Tan, G.-Y. A., Ge, L., Chen, C.-L., & Wang, J.-Y. (2016). Microbial removal of carboxylic acids from 1,3-propanediol inglycerol anaerobic digestion effluent by PHAs-producing consortium. Biochemical Engineering Journal, 112, 269–276. https://doi.org/https://doi.org/10.1016/j.bej.2016.04.031
- Parveen, R., Ullah, S., Sgarbi, R., & Tremiliosi-Filho, G. (2019). One-pot ligand-free synthesis of gold nanoparticles: The role of glycerol as reducingcum-stabilizing agent. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 565, 162–171. https://doi.org/https://doi.org/10.1016/j.colsurfa.2019.01.005
- Pinzi, S., Redel-Macías, M. D., Leiva-Candia, D. E., Soriano, J. A., & Dorado, M. P. (2017). Influence of ethanol/diesel fuel and propanol/diesel fuel blends over exhaust and noise emissions. Energy Procedia, 142, 849–854. https://doi.org/https://doi.org/10.1016/j.egypro.2017.12.136
- Pirog, T., Sofilkanych, A., Konon, A., Shevchuk, T., & Ivanov, S. (2013). Intensification of surfactants’ synthesis by rhodococcus erythropolis IMV Ac-5017, acinetobacter calcoaceticus IMV B-7241 and nocardia vaccinii K-8 on fried oil and glycerol containing medium. Food and Bioproducts Processing, 91(2), 149–157. https://doi.org/https://doi.org/10.1016/j.fbp.2013.01.001
- Pitt, F. D., Domingos, A. M., & Barros, A. C. (2019). Purification of residual glycerol recovered from biodiesel production. South African Journal of Chemical Engineering, 29, 42–51. https://doi.org/https://doi.org/10.1016/j.sajce.2019.06.001
- Qing, Y., Lu, H., Liu, Y., Liu, C., Liang, B., & Jiang, W. (2017). Production of glycerol carbonate using crude glycerol from biodiesel production with DBU as a catalyst. Chinese Journal of Chemical Engineering, 26, 1912–1919. https://doi.org/https://doi.org/10.1016/j.cjche.2018.01.010
- Rades, N., Achazi, K., & Qiu, M. (2019). Reductively cleavable polymer-drug conjugates based on dendritic polyglycerol sulfate and monomethyl auristatin E as anticancer drugs. Journal of Controlled Release. https://doi.org/https://doi.org/10.1016/j.jconrel.2019.01.035
- Rahmat, N., Abdullah, A. Z., & Mohamed, A. R. (2010). Recent progress on innovative and potential technologies for glycerol transformation into fuel additives: A critical review. Renewable and Sustainable Energy Reviews, 14(3), 987–1000. https://doi.org/https://doi.org/10.1016/j.rser.2009.11.010
- Raj, S. M., Rathnasingh, C., Jo, J. E., & Park, S. (2008). Production of 3-hydroxypropionic acid from glycerol by a novel recombinant Escherichia coli BL21 strain. Process Biochemistry, 43(12), 1440–1446. https://doi.org/https://doi.org/10.1016/j.procbio.2008.04.027
- Roslan, N. A., Abidin, S. Z., Ideris, A., & Vo, D. V. N. (2019). A review on glycerol reforming processes over Ni-based catalyst for hydrogen and syngas productions. International Journal of Hydrogen Energy, 45(36), 18466–18489. https://doi.org/https://doi.org/10.1016/j.ijhydene.2019.08.211
- Roy, M. M., Calder, J., Wang, W., Mangad, A., & Diniz, F. C. M. (2016). Cold start idle emissions from a modern tier-4 turbo-charged diesel engine fueled with diesel-biodiesel, diesel-biodiesel-ethanol, and diesel-biodiesel-diethyl ether blends. Applied Energy, 180, 52–65. https://doi.org/https://doi.org/10.1016/j.apenergy.2016.07.090
- Sangkhum, P., Yanamphorn, J., Wangriya, A., & Ngamcharussrivichai, C. (2019). Ca–Mg–Al ternary mixed oxides derived from layered double hydroxide for selective etherification of glycerol to short-chain polyglycerols. Applied Clay Science, 173, 79–87. https://doi.org/https://doi.org/10.1016/j.clay.2019.03.006
- Sardari, R. R. R., Dishisha, T., Pyo, S.-H., & Hatti-Kaul, R. (2013). Biotransformation of glycerol to 3-hydroxypropionaldehyde: Improved production by in situ complexation with bisulfite in a fed-batch mode and separation on anion exchanger. Journal of Biotechnology, 168(4), 534–542. https://doi.org/https://doi.org/10.1016/j.jbiotec.2013.09.009
- Sardari, R. R. R., Dishisha, T., Pyo, S.-H., & Hatti-Kaul, R. (2014). Semicarbazide-functionalized resin as a new scavenger for in siturecovery of 3-hydroxypropionaldehyde during biotransformation of glycerol by Lactobacillus reuteri. Journal of Biotechnology, 192, 223–230. https://doi.org/https://doi.org/10.1016/j.jbiotec.2014.10.013
- Saxena, S. K., Al-Muhtaseb, A. H., & Viswanadham, N. (2015). Enhanced production of high octane oxygenates from glycerol etherification using the desilicated BEA zeolite. Fuel, 159, 837–844. https://doi.org/https://doi.org/10.1016/j.fuel.2015.07.028
- Sen, M. (2019). The effect of the injection pressure on single cylinder diesel engine fueled with propanol–diesel blend. Fuel, 254, Article 115617. https://doi.org/https://doi.org/10.1016/j.fuel.2019.115617
- Shaafi, T., & Velraj, R. (2015). Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: Combustion, engine performance and emissions. Renewable Energy, 80, 655–663. https://doi.org/https://doi.org/10.1016/j.renene.2015.02.042
- Shoar, F. H., Abdi, R., Najafi, B., & Ardabili, S. F. (2019). The effect of thermochemical pre-treatment on biogas production efficiency from kitchen waste using a novel lab scale digester. Renewable Energy Focus, 28, 140–152. https://doi.org/https://doi.org/10.1016/j.ref.2018.12.001
- Shoar, F. H., Najafi, B., & Mosavi, A. (2021). Effects of triethylene glycol mono methyl ether (TGME) as a novel oxygenated additive on emission and performance of a dual-fuel diesel engine fueled with natural gas-diesel/biodiesel. Energy Reports, 7, 1172–1189. https://doi.org/https://doi.org/10.1016/j.egyr.2021.01.088
- Simonetti, D. A., Rass-Hansen, J., Kunkes, E. L., Soares, R. R., & Dumesic, J. A. (2007). Coupling of glycerol processing with Fischer-Tropsch synthesis for production of liquid fuels. Green Chemistry, 9(10), 1073–1083. https://doi.org/https://doi.org/10.1039/b704476c
- Singh, A., Olsen, S. I., & Nigam, P. S. (2011). A viable technology to generate third-generation biofuel. Journal of Chemical Technology & Biotechnology, 86(11), 1349–1353. https://doi.org/https://doi.org/10.1002/jctb.2666
- Srinivas, M., Raveendra, G., Parameswaram, G., Prasad, P. S. S., & Lingaiah, N. (2015). Cesium exchanged tungstophosphoric acid supported on tin oxide: An efficient solid acid catalyst for etherification of glycerol with tertbutanol to synthesize biofuel additives. Journal of Molecular Catalysis A: Chemical, 413, 7–14. https://doi.org/https://doi.org/10.1016/j.molcata.2015.10.005
- Tabatabaei, M., Aghbashlo, M., Dehhaghi, M., Panahi, H. K. S., Mollahosseini, A., Hosseini, M., & Soufiyan, M. M. (2019). Reactor technologies for biodiesel production and processing: A review. Progress in Energy and Combustion Science, 74, 239–303. https://doi.org/https://doi.org/10.1016/j.pecs.2019.06.001
- Talebian-Kiakalaieh, A., & Saidina Amin, N. R. (2017). Coke-tolerant SiW20-Al/Zr10 catalyst for glycerol dehydration to acrolein. Chinese Journal of Catalysis, 38(10), 1697–1710. https://doi.org/https://doi.org/10.1016/S1872-2067(17)62891-2
- Tang, Y., Xue, Y., Li, Z., Yan, T., Zhou, R., & Zhang, Z. (2019). Heterogeneous synthesis of glycerol carbonate from glycerol and dimethyl carbonate catalyzed by LiCl/CaO. Journal of Saudi Chemical Society, 23(4), 494–502. https://doi.org/https://doi.org/10.1016/j.jscs.2018.11.003
- Teng, W. K., Ngoh, G. C., Yusoff, R., & Aroua, M. K. (2014). A review on the performance of glycerol carbonate production via catalytic transesterification: Effects of influencing parameters. Energy Conversion and Management, 88, 484–497. https://doi.org/https://doi.org/10.1016/j.enconman.2014.08.036
- Thomas, A., Muller, S. S., & Frey, H. (2014). Beyond poly (ethylene glycol): Linear polyglycerol as a multifunctional polyether for biomedical and pharmaceutical applications. Biomacromolecules, 15(6), 1935–1954. https://doi.org/https://doi.org/10.1021/bm5002608
- Tsai, J.-H., Chen, S. J., Huang, K. L., Lin, W. Y., Lee, W. J., Lin, C. C., & Kuo, W. C. (2013). Emissions from a generator fueled by blends of diesel, biodiesel, acetone, and isopropyl alcohol: Analyses of emitted PM, particulate carbon, and PAHs. Science of The Total Environment, 466, 195–202. https://doi.org/https://doi.org/10.1016/j.scitotenv.2013.07.025
- Tsuji, A., Rao, K. T. V., Nishimura, S., Takagaki, A., & Ebitani, K. (2011). Selective oxidation of glycerol by using a hydrotalcite-supported platinum catalyst under atmospheric oxygen pressure in water. ChemSusChem, 4(4), 542–548. https://doi.org/https://doi.org/10.1002/cssc.201000359
- Veiga, P. M., Gomes, A. C. L., Veloso, C. O., & Henriques, C. A. (2017). Acid zeolites for glycerol etherification with ethyl alcohol: Catalytic activity and catalyst properties. Applied Catalysis A: General, 548, 2–15. https://doi.org/https://doi.org/10.1016/j.apcata.2017.06.042
- Veum, K., & Bauknecht, D. (2019). How to reach the EU renewables target by 2030. An analysis of the governance framework. Energy Policy, 127, 299–307. https://doi.org/https://doi.org/10.1016/j.enpol.2018.12.013
- Vieira, L. H., Carvalho, K. T., Urquieta-González, E. A., Pulcinelli, S. H., Santilli, C. V., & Martins, L. (2015). Effects of crystal size, acidity, and synthesis procedure on the catalyticperformance of gallium and aluminum MFI zeolites in glyceroldehydration. Journal of Molecular Catalysis A: Chemical, 422, 148–157. https://doi.org/https://doi.org/10.1016/j.molcata.2015.12.019
- Vlad, E., Bildea, C. S., Zaharia, E., & Bozga, G. (2011). Conceptual design of glycerol etherification processes. Computer Aided Chemical Engineering, 29, 331–335. https://doi.org/https://doi.org/10.1016/B978-0-444-53711-9.50067-5
- Wang, S., Hao, P., Li, S., Zhang, A., Guan, Y., & Zhang, L. (2017). Synthesis of glycerol carbonate from glycerol and dimethyl carbonate catalyzed by calcined silicates. Applied Catalysis A: General. https://doi.org/https://doi.org/10.1016/j.apcata.2017.05.021
- Wang, K., Hawley, M. C., & DeAthos, S. J. (2003). Conversion of glycerol to 1,3-propanediol via selective dehydroxylation. Industrial & Engineering Chemistry Research, 42(13), 2913–2920. https://doi.org/https://doi.org/10.1021/ie020754h
- Watanabe, M., Iida, T., Aizawa, Y., Aida, T. M., & Inomata, H. (2007). Acrolein synthesis from glycerol in Hot compressed water. Bioresource Technology, 98(6), 1285–1290. https://doi.org/https://doi.org/10.1016/j.biortech.2006.05.007
- Wu, H., Nithyanandan, K., Zhou, N., Lee, T. H., Chia-fon, F. L., & Zhang, C. (2014). Impacts of acetone on the spray combustion of acetone–butanol–ethanol (ABE)-diesel blends under low ambient temperature. Fuel, 142, 109–116. https://doi.org/https://doi.org/10.1016/j.fuel.2014.10.009
- Wu, H., Lee, T. H., Lee, C.-f., Liu, F., & Sun, B. (2016). Optical soot measurement of bio-butanol upstream product, ABE (acetone–butanol–ethanol), under diesel-like conditions. Fuel, 181, 300–309. https://doi.org/https://doi.org/10.1016/j.fuel.2016.04.092
- Xie, Q., Li, S., Gong, R., Zheng, G., Wang, Y., Xu, P., & Ji, J. (2018). Microwave-assisted catalytic dehydration of glycerol for sustainable production of acrolein over a microwave absorbing catalyst. Applied Catalysis B: Environmental, 243, 455–462. https://doi.org/https://doi.org/10.1016/j.apcatb.2018.10.058
- Xu, Y., Keresztes, I., Condo, A. M., Phillips, D., Pepiot, P., & Avedisian, C. T. (2016). Droplet combustion characteristics of algae-derived renewable diesel, conventional# 2 diesel, and their mixtures. Fuel, 167, 295–305. https://doi.org/https://doi.org/10.1016/j.fuel.2015.11.036
- Yan, H., Yao, S., Liang, W., Feng, X., Jin, X., Liu, Y., Chen, X., & Yang, C. (2019). Selective oxidation of glycerol to carboxylic acids on Pt (111) in base-free medium: A periodic density functional theory investigation. Applied Surface Science, 497, Article 143661. https://doi.org/https://doi.org/10.1016/j.apsusc.2019.143661
- Yang, J., Jiang, Y., Karavalakis, G., Johnson, K. C., Kumar, S., Cocker, D. R., & Durbin, T. D. (2016). Impacts of dimethyl carbonate blends on gaseous and particulate emissions from a heavy-duty diesel engine. Fuel, 184, 681–688. https://doi.org/https://doi.org/10.1016/j.fuel.2016.07.053
- Yang, L., Li, X., Chen, P., & Hou, Z. (2019). Selective oxidation of glycerol in a base-free aqueous solution: A short review. Chinese Journal of Catalysis, 40(7), 1020–1034. https://doi.org/https://doi.org/10.1016/S1872-2067(19)63301-2
- Yang, L., Takase, M., Zhang, M., Zhao, T., & Wu, X. (2014). Potential non-edible oil feedstock for biodiesel production in Africa: A survey. Renewable and Sustainable Energy Reviews, 38, 461–477. https://doi.org/https://doi.org/10.1016/j.rser.2014.06.002
- Yazdani, S. S., & Gonzalez, R. (2007). Anaerobic fermentation of glycerol: A path to economic viability for the biofuels industry. Current Opinion in Biotechnology, 18(3), 213–219. https://doi.org/https://doi.org/10.1016/j.copbio.2007.05.002
- Yilmaz, N., & Atmanli, A. (2017). Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends. Fuel, 191, 190–197. https://doi.org/https://doi.org/10.1016/j.fuel.2016.11.065
- Yun, D., Yun, Y. S., Kim, T. Y., Park, H., Lee, J. M., Han, J. W., & Yi, J. (2016). Mechanistic study of glycerol dehydration on Brønsted acidic amorphous aluminosilicate. Journal of Catalysis, 341, 33–43. https://doi.org/https://doi.org/10.1016/j.jcat.2016.06.010
- Zaushitsyna, O., Dishisha, T., Hatti-Kaul, R., & Mattiasson, B. (2017). Crosslinked, cryostructured Lactobacillus reuteri monoliths for production of 3-hydroxypropionaldehyde, 3-hydroxypropionic acid and 1, 3-propanediol from glycerol. Journal of Biotechnology, 241, 22–32. https://doi.org/https://doi.org/10.1016/j.jbiotec.2016.11.005
- Zhang, L., Hu, C.-H., Cheng, S.-X., & Zhuo, R.-X. (2010). PEI grafted hyperbranched polymers with polyglycerol as a core for gene delivery. Colloids and Surfaces B: Biointerfaces, 76(2), 427–433. https://doi.org/https://doi.org/10.1016/j.colsurfb.2009.12.001
- Zhang, F., Ren, X., Huang, H., Huang, J., Sudhakar, M., & Liu, L. (2018). High-performance phosphate supported on HZSM-5 catalyst for dehydration of glycerol to acrolein. Chinese Journal of Chemical Engineering, 26(5), 1031–1040. https://doi.org/https://doi.org/10.1016/j.cjche.2018.01.005
- Zheng, Y., Chen, X., & Shen, Y. (2008). Commodity chemicals derived from glycerol, an important biorefinery feedstock. Chemical Reviews, 108(12), 5253–5277. https://doi.org/https://doi.org/10.1021/cr068216s
- Zheng, L., Xia, S., Lu, X., & Hou, Z. (2015). Transesterification of glycerol with dimethyl carbonate over calcined Ca-Al hydrocalumite. Chinese Journal of Catalysis, 36(10), 1759–1765. https://doi.org/https://doi.org/10.1016/S1872-2067(15)60915-9
- Zhou, N., Huo, M., Wu, H., Nithyanandan, K., Chia-fon, F. L., & Wang, Q. (2013). Low temperature spray combustion of acetone–butanol–ethanol (ABE) and diesel blends. Applied Energy, 117, 104–115. https://doi.org/https://doi.org/10.1016/j.apenergy.2013.11.035