A bibliometric analysis of the research on shot peening

References

• Bagherifard, S., and M. Guagliano. 2009. “Review of Shot Peening Processes to Obtain Nanocrystalline Surfaces in Metal Alloys.” Surface Engineering 25 (1): 3–14. doi: 10.1179/026708408X334087
   Web of Science ®Google Scholar
• Baragetti, S. 1997. “Shot Peening Optimisation by Means of Doe: Numerical Simulation and Choice of Treatment Parameters.” International Journal of Materials & Product Technology 12 (2-3): 83–109.
   Web of Science ®Google Scholar
• Baskaran, B., S. M. Srinivasan, M. Bob, and P. Om. 2011. “Constrained Probabilistic Multi-Objective Optimization of Shot Peening Process.” Engineering Optimization 43 (6): 657–673. doi: 10.1080/0305215X.2010.508523
   Web of Science ®Google Scholar
• Chen, C. 2006. “Citespace II: Detecting and Visualizing Emerging Trends and Transient Patterns in Scientific Literature.” Journal of the American Society for Information Science and Technology 57 (3): 359–377. doi: 10.1002/asi.20317
   Web of Science ®Google Scholar
• Chen, S., D. A. Desai, S. P. Heyns, and F. Pietra. 2019. “Literature Review of Numerical Simulation and Optimisation of the Shot Peening Process.” Advances in Mechanical Engineering 11 (3): 1–19.
   Web of Science ®Google Scholar
• Farine, D. R., and H. Whitehead. 2015. “Constructing, Conducting and Interpreting Animal Social Network Analysis.” Journal of Animal Ecology 84 (5): 1144–1163. doi: 10.1111/1365-2656.12418
   PubMed Web of Science ®Google Scholar
• Han, J., M. Kamber, and J. Pei. 2012. Data Mining Concepts and Techniques. Waltham: Elsevier Inc.
   Google Scholar
• Hong, T., J. Y. Ooi, and B. Shaw. 2008. “A Numerical Simulation to Relate the Shot Peening Parameters to the Induced Residual Stresses.” Engineering Failure Analysis 15 (8): 1097–1110. doi: 10.1016/j.engfailanal.2007.11.017
   Web of Science ®Google Scholar
• Jayalakshmi, M., P. Huilgol, B. R. Bhat, and K. U. Bhat. 2016. “Microstructural Characterization of low Temperature Plasma-Nitrided 316 L Stainless Steel Surface with Prior Severe Shot Peening.” Materials & Design 108: 448–454. doi: 10.1016/j.matdes.2016.07.005
   Web of Science ®Google Scholar
• Kobayashi, M., T. Matsui, and Y. Murakami. 1998. “Mechanism of Creation of Compressive Residual Stress by Shot Peening.” International Journal of Fatigue 20 (5): 351–357. doi: 10.1016/S0142-1123(98)00002-4
   Web of Science ®Google Scholar
• Li, J., and C. Chen. 2016. Text Mining and Visualisation in Scientific Literature. 1st ed. Beijin: Capital University of Economics and Business Press.
   Google Scholar
• Li, L., J. Hu, and Y. S. Ho. 2015. “Global Performance and Trend of Qsar/Qspr Research: A Bibliometric Analysis.” Qsar and Combinatorial Science 33 (10): 655–668.
   Google Scholar
• Montross, C. S., T. Wei, L. Ye, G. Clark, and Y. W. Mai. 2002. “Laser Shock Processing and Its Effects on Microstructure and Properties of Metal Alloys: A Review.” International Journal of Fatigue 24 (10): 1021–1036. doi: 10.1016/S0142-1123(02)00022-1
   Web of Science ®Google Scholar
• Murugaratnam, K., S. Utili, and N. Petrinic. 2015. “A Combined DEM–FEM Numerical Method for Shot Peening Parameter Optimisation.” Advances in Engineering Software 79: 13–26. doi: 10.1016/j.advengsoft.2014.09.001
   Web of Science ®Google Scholar
• Nam, Y. S., U. Jeon, H. K. Yoon, B. C. Shin, and J. H. Byun. 2016. “Use of Response Surface Methodology for Shot Peening Process Optimization of an Aircraft Structural Part.” International Journal of Advanced Manufacturing Technology 87 (9-12): 2967–2981. doi: 10.1007/s00170-016-8690-5
   Web of Science ®Google Scholar
• Newman, M. E. 2004. “Coauthorship Networks and Patterns of Scientific Collaboration.” Proceedings of the National Academy of Sciences 101 (Supplement 1): 5200–5205. doi: 10.1073/pnas.0307545100
   PubMedGoogle Scholar
• Patra, S. K., and M. Muchie. 2017. “Engineering Research Profile of Countries in the African Union.” African Journal of Science, Technology, Innovation and Development 9 (4): 449–465. doi: 10.1080/20421338.2017.1341732
   Web of Science ®Google Scholar
• Pritchard, A. 1969. “Statistical Bibliography or Bibliometrics.” Journal of Documentation 25 (4): 348–349.
   Web of Science ®Google Scholar
• Purohit, R., C. S. Verma, R. S. Rana, R. K. Dwivedi, R. Dwivedi, and D. Banoriya. 2017. “Optimization of Process Parameters of Shot Peening Using Abqus.” Materials Today: Proceedings 4 (2017): 2119–2128.
   Google Scholar
• Romero, J. S., E. R. De Los Rios, A. Levers, and S. Karuppanan. 2001. “Towards the Optimisation of the Shot Peening Process in Terms of Fatigue Resistance of the 2024-t351 and 7150-t651 Aluminium Alloys.” Transactions on Engineering Sciences 33 (12): 343–355.
   Google Scholar
• Sanjurjo, P., C. Rodriguez, I. Penuelas, T. E. Garcia, and F. J. Belzunce. 2014. “Influence of the Target Material Constitutive Model on the Numerical Simulation of a Shot Peening Process.” Surface & Coatings Technology 258: 822–831. doi: 10.1016/j.surfcoat.2014.07.075
   Web of Science ®Google Scholar
• Shukla, P. P., P. T. Swanson, and C. J. Page. 2014. “Laser Shock Peening and Mechanical Shot Peening Processes Applicable for the Surface Treatment of Technical Grade Ceramics: A Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 (5): 639–652. doi: 10.1177/0954405413507250
   Web of Science ®Google Scholar
• Sooryamoorthy, R. 2013. “Scientific Research in the Natural Sciences in South Africa: A Scientometric Study.” South African Journal of Science 109 (7-8): 1–11.
   Web of Science ®Google Scholar
• Tao, N. R., M. L. Sui, J. Lu, and K. Lua. 1999. “Surface Nanocrystallization of Iron Induced by Ultrasonic Shot Peening.” Nanostructured Materials 11 (4): 433–440. doi: 10.1016/S0965-9773(99)00324-4
   Web of Science ®Google Scholar
• Tu, F., D. Delbergue, H. Miao, T. Klotz, M. Brochu, P. Bocher, and M. Levesque. 2017. “A Sequential DEM-FEM Coupling Method for Shot Peening Simulation.” Surface and Coatings Technology 319: 200–212. doi: 10.1016/j.surfcoat.2017.03.035
   Web of Science ®Google Scholar
• Unal, O. 2016. “Optimization of Shot Peening Parameters by Response Surface Methodology.” Surface and Coatings Technology 305: 99–109. doi: 10.1016/j.surfcoat.2016.08.004
   Web of Science ®Google Scholar
• Yang, W. 2016. “National Natural Science Foundation of China: Funding Excellent Basic Research for 30 Years.” Nature 537: 618–622. doi: 10.1038/537167c
   Web of Science ®Google Scholar
• Yildiran, Y., E. Avcu, and T. Sinmazçelik. 2015. “Optimization of Surface Properties of Shot Peened ti6al4v Alloy.” Acta Physica Polonica A 127 (4): 984–986. doi: 10.12693/APhysPolA.127.984
   Web of Science ®Google Scholar
• Zhang, J., F. Zheng, F. Zheng, C. Long, Z. Lu, and Z. Duan. 2016. “Comparing Keywords Plus of wos and Author Keywords: A Case Study of Patient Adherence Research.” Journal of the Association for Information Science & Technology 67 (4): 967–972. doi: 10.1002/asi.23437
   Web of Science ®Google Scholar
• Zheng, M., H.-Z. Fu, and Y.-S. Ho. 2017. “Research Trends and Hotspots Related to Ammonia Oxidation Based on Bibliometric Analysis.” Environmental Science and Pollution Research 24 (25): 20409–20421. doi: 10.1007/s11356-017-9711-0
   PubMed Web of Science ®Google Scholar
• Zimmermann, M., and M. Klemenz. 2010. “Literature Review on Shot Peening Simulation.” International Journal of Computational Materials Science and Surface Engineering 3 (4): 289–310. doi: 10.1504/IJCMSSE.2010.036218
   Google Scholar