References
- Biziks V, Andersons B, Sansonetti E, Andersone I, Militz H, Grinins J. 2015. One-stage thermo-hydro treatment (THT) of hardwoods: an analysis of form stability after five soaking-drying cycles. Holzforschung. 69(5):563–571. doi: 10.1515/hf-2014-0083
- Dorostkar A. 2015. Investigation on effect of wood species and particle size on water absorption property of composite made of sawdust and polypropylene. Sci J. 36(4):499–505.
- Energy Saving Group. 2009. Feasibility study on wood utilization in Serbia. United States Agency for International Development, 64 pp.
- Goto T, Saiki H, Onishi H. 1982. Studies on wood gluing XIII: gluability and scanning electron microscopic study of wood-polypropylene bonding. Wood Sci Technol. 16:293–303. doi: 10.1007/BF00353157
- Hill CAS. 2006. Wood modification: chemical, thermal and other processes. Chichester: John Wiley & Sons. 248.
- Hosseinihashemi SK, Arwinfar F, Najafi A, Nemli G, Ayrilmis N. 2016. Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood. Measurement. 86:202–208. doi: 10.1016/j.measurement.2016.02.058
- Kallakas H, Poltimae T, Suld T, Kers J, Krumme A. 2015. The influence of accelerated weathering on the mechanical and physical properties of wood-plastic composites. Proc Estonian Acad Sci. 64(1S):94–104. doi: 10.3176/proc.2015.1S.05
- Kamel MANE. 2010. Investigating the mechanical and physical properties of wood plastic composites (WPC). Summary of Promotion Thesis, American University of Cairo, Cairo.
- Klyosov AA. 2007. Wood-plastic composites. Hoboken, NJ: John Wiley & Sons. 726 pp.
- Kociszewski M, Gozdecki C, Wilczynski A, Zajchowski S, Mirowski J. 2012. Effect of industrial wood particle size on mechanical properties of wood-polyvinyl chloride composites. Eur J Wood Prod. 70:113–118. doi: 10.1007/s00107-011-0531-5
- Kuka E, Cirule D, Kajaks J, Andersone I, Andersons B. 2016. Wood plastic composites made with thermally modified birch wood residues. Int Wood Prod J. 7(4):225–230. doi: 10.1080/20426445.2016.1214439
- Kuka E, Cirule D, Kajaks J, Janberga A, Andersone I, Andersons B. 2017. Fungal degradation of wood plastic composites made with thermally modified wood residues. Key Eng Mat. 721:8–12. doi: 10.4028/www.scientific.net/KEM.721.8
- Li Y. 2012. Effects of coupling agent concentration, fiber content, and size on mechanical properties of wood/HDPE composites. Int J Polym Mater Po. 61(11):882–890. doi: 10.1080/00914037.2011.617338
- Mehmood S, Khaliq A, Ranjha SA. 2010. The use of post consumer wood waste for the production of wood plastic composites: a review. In: Proceedings of the Third International Symposium on Energy from Biomass and Waste, November 8–11, Venice, Italy.
- Migneault S, Koubaa A, Erchiqui F, Chaala A, Englund K, Wolcott MP. 2009. Effects of processing method and fiber size on the structure and properties of wood–plastic composites. Compos Part A: Appl Sci Manufact. 40:80–85. doi: 10.1016/j.compositesa.2008.10.004
- Morrell JJ, Stark NM, Pendleton DE, McDonald AG. 2009. Durability of wood-plastic composites. In: Proceedings of 10th International Conference on Wood & Biofiber Plastic Composites, Wisconsin, USA.
- Morris PI, Cooper P. 1998. Recycled plastic/wood composite lumber attacked by fungi. Forest Prod J. 48:86–88.
- Segerholm K. 2012. Characteristics of wood plastic composites based on modified wood – moisture properties, biological resistance and micromorphology. Summary of Promotion Thesis, KTH Building Materials Technology, Stockholm.
- Stark NM. 2001. Influence of moisture absorption on mechanical properties of wood flour-polypropylene composites. J Thermoplast Compo Material. 14:421–432. doi: 10.1106/UDKY-0403-626E-1H4P
- Stark NM, Rowlands RE. 2003. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci. 32(2):167–174.
- Tamrakar S, Lopez-Anido RA. 2011. Water absorption of wood polypropylene composite sheet piles and its influence on mechanical properties. Constr Build Mater. 25(10):3977–3988. doi: 10.1016/j.conbuildmat.2011.04.031