On the fluid permeability of heat treated paulownia wood

References

• Ada R. 2013. Cluster analysis and adaptation study for safflower genotypes. Bulg J Agric Sci. 19(1):103–109.
   Google Scholar
• Altuntas E, Narlioglu N, Alma MH. 2017. Investigation of the fire, thermal, and mechanical properties of zinc borate and synergic fir retardants on composites produced with PP-MDF wastes. BioResources. 12(4):6971–6983.
   Web of Science ®Google Scholar
• Arce N, Moya R. 2015. Wood characterization of adult clones of Tectona grandis growing in Costa Rica. CERNE. 21(3):353–362. doi: 10.1590/01047760201521031751
   Web of Science ®Google Scholar
• Ayata U, Akcay C, Esteves B. 2017. Determination of decay resistance against Pleurotus ostreatus and Coniophora puteana fungus of heat-treated scotch pine, oak and beech wood species. Maderas Ciencia y Tecnologia. 19(3):309–316.
   Web of Science ®Google Scholar
• Bastani A, Adamopoulos S, Koddenberg T, Militz H. 2016b. Study of adhesive bondlines in modified wood with fluorescence microscopy and X-ray micro-computed tomography. Int J Adhesion Adhesives. 68:351–358. doi: 10.1016/j.ijadhadh.2016.04.006
   Web of Science ®Google Scholar
• Bastani A, Adamopoulos S, Militz H. 2015. Effect of open assembly time and equilibrium moisture content on the penetration of polyurethane adhesive into thermally modified wood. J Adhes. 93(7):575–583. doi: 10.1080/00218464.2015.1118621
   Web of Science ®Google Scholar
• Bastani A, Adamopoulos S, Militz H. 2016a. Shear strength of furfurylated, N-methylol melamine and thermally modified wood bonded with three conventional adhesives. Wood Mater Sci Eng. 12(4):236–241. doi: 10.1080/17480272.2016.1164754
   Web of Science ®Google Scholar
• Borrega M, Karenlampi PP. 2010. Hygroscopicity of heat-treated Norway Spruce (Picea abies) wood. Eur J Wood Prod. 68(2):233–235. doi 10.1007/s00107-0090371-8 doi: 10.1007/s00107-009-0371-8
   Web of Science ®Google Scholar
• Candan Z, Akbulut T. 2014. Nano-engineered plywood panels: Performance properties. Compos Part B. 64:15–161. doi: 10.1016/j.compositesb.2014.04.021
   Web of Science ®Google Scholar
• Chaiyo K, Rattanadecho P. 2013. Numerical analysis of heat-mass transport and pressure build-up in 1D unsaturated porous medium subjected to a combined microwave and vacuum system. Dry Technol. 31(6):684–697. doi:10.1080/07373937.2012.754461.
   Web of Science ®Google Scholar
• Daly-Hassen H, Kasraoui M, Karra C. 2014. Industrial timber production in Tunisia: despite reforestation, dependence on imports is increasing. Bois et Forets Des Tropiques. 324(4):29–37. doi: 10.19182/bft2014.322.a31232
   Google Scholar
• De Almeida Andrade AC, da Silva JRM, Braga Junior RA, Moulin JC. 2016. Distinction of mechanically processed wood surfaces with similar qualities using sunset laser technique. CERNE. 22(2):159–162. doi: 10.1590/01047760201622022025
   Web of Science ®Google Scholar
• De Medeiros FCM, Gouveia FN, Bizzo HR, Vieira RF, Del Menezzi CHS. 2016.  Fungicide activity of essential oils from Brazilian Cerrado specie against wood decay fungi. Int Biodeter Biodegrad. 114:87–93. doi: 10.1016/j.ibiod.2016.06.003
   Web of Science ®Google Scholar
• Dundar T, Buyuksari U, Avci E, Akkilic H. 2012. Effect of heat treatment on the physical and mechanical properties of compression and opposite wood of black pine. BioResources. 7(4):5009–5018. doi: 10.15376/biores.7.4.5009-5018
   Web of Science ®Google Scholar
• Fernandes C, Gaspar MJ, Pires J, Alves A, Simões R, Rodrigues JC, Silva ME, Carvalho A, Brito JE, Lousada JL. 2017. Physical, chemical and mechanical properties of Pinus sylvestris wood at five sites in Portugal. iForest Biogeosciences and Forestry. 10:669–679. doi: 10.3832/ifor2254-010
   Web of Science ®Google Scholar
• Fernandez-Puratich H, Oliver-Villanueva JV. 2014. Quantification of biomass and energetic value of young natural regenerated stands of Quercus ilex under Mediterranean conditions. BOSQUE. 35(1):65–74. doi: 10.4067/S0717-92002014000100007
   Web of Science ®Google Scholar
• Guo L, Xue P, Shao X. 2017. Seed bank and regeneration dynamics of Emmenopterys henryi population on the western side of Wuyi Mountain, South China. J For Res. 28(5):943–952. doi: 10.1007/s11676-017-0376-9
   Google Scholar
• Hill C. 2006. Wood modification chemical, thermal and other processes. Chichester: John Wiley & Sons, Ltd.
   Google Scholar
• Hosseinpourpia R, Adamopoulos S, Holstein N, Mai C. 2017. Dynamic vapour sorption and water-related properties of thermally modified Scots pine (Pinus sylvestris L.) wood pre-treated with proton acid. Polym Degrad Stab. 138:161–168. doi: 10.1016/j.polymdegradstab.2017.03.009
   Web of Science ®Google Scholar
• Hosseinpourpia R, Adamopoulos S, Mai C. 2018. Effects of acid pre-treatments on the swelling and vapor sorption of thermally modified Scots pine (Pinus sylvestris L.) wood. BioResources. 13(1):331–345.
   Web of Science ®Google Scholar
• Laskowska A, Kozalkiewicz P. 2017. Surface wettability of wood species from tropical and temperate zones by polar and dispersive liquids. Drvna Industrija. 68(4):299–306. doi: 10.5552/drind.2017.1704
   Web of Science ®Google Scholar
• Mahnert KC, Adamopoulos S, Koch G, Militz H. 2013. Topochemistry of heat-treated and N-methylol melamine modified wood of Koto (Pterygotamacrocarpa K. Schum.) and Limba (Terminalia superba Engl. et Diels). Holzforschung. 67(2):137–146. doi: 10.1515/hf-2012-0017
   Web of Science ®Google Scholar
• Maresi G, Oliveira Longa CM, Turchetti T. 2013. Brown rot on nuts of Castanea sativa mill: an emerging disease and its causal agent. iForest. 6:294–301. doi: 10.3832/ifor0952-006
   Web of Science ®Google Scholar
• Oltean L, Teischinger A, Hansmann C. 2007. Influence of temperature on cracking and mechanical properties of wood during wood drying – a review. BioResources. 2(4):789–811.
   Web of Science ®Google Scholar
• Poletto M. 2017. Polypropylene-based wood-plastic composites: effect of using coupling agent derived from a renewable resource. Maderas, Ciencia y tecnologia. 19(3):265–272.
   Web of Science ®Google Scholar
• Poonia PK, Hom SK, Sihag K, Tripathi S. 2016. Effect of microwave treatment on longitudinal air permeability and preservative uptake characteristics of chir pine wood. Maderas Ciencia y Tecnologia. 18(1):125–132.
   Web of Science ®Google Scholar
• Sandberg D, Kutnar A, Mantanis G. 2017. Wood modification technologies – a review. iForest. 10:895–908. doi: 10.3832/ifor2380-010
   Web of Science ®Google Scholar
• Schmidt O. 2006. Wood and tree fungi: biology, damage, protection, and use. Berlin: Springer-Verlag.
   Google Scholar
• Shibata H, Hirohashi Y. 2013. Effect of segment scale in a pore network of porous materials on drying periods. Dry Technol. 31(7):743–751. doi: 10.1080/07373937.2012.752742
   Web of Science ®Google Scholar
• Siau JF. 1995. Wood: influence of moisture on physical properties. Blacksburg, VA: Department of Wood Science and Forest Products Virginian Polytechnic Institute and State University. 1-63.
   Google Scholar
• Soykeabkaew N, Tawichai N, Thanomsilp C, Suwantong O. 2017. Nanocellulose-reinforced “green” composite materials. Walailak J Sci Technol. 14(5):353–368.
   Google Scholar
• Sozbir GD, Bektas IB. 2017. The effect of heat modification and densification on physical properties of poplar wood. Drvna Industrija. 68(4):315–321. doi: 10.5552/drind.2017.1719
   Web of Science ®Google Scholar
• Sundqvist B, Karlsson O, Westermark U. 2006. Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci Technol. 40(7):549–561. doi: 10.1007/s00226-006-0071-z
   Web of Science ®Google Scholar
• Taghiyari HR. 2012. Correlation between gas and liquid permeability in some nanosilver-impregnated and untreated hardwood. Journal of Tropical Forest Science. 24(2):249–255.
   Web of Science ®Google Scholar
• Taghiyari HR, Avramidis S. 2019. Specific gas permeability of normal and nanosilver-impregnated solid wood species as influenced by heat-treatment. Maderas, Ciencia y tecnologia. 21(1):89–96.
   Web of Science ®Google Scholar
• Taghiyari HR, Habibzadeh S, Miri Tari SM. 2014. Effects of wood drying schedules on fluid flow in Paulownia wood. Dry Technol. 32(1):89–95. doi: 10.1080/07373937.2013.813855
   Web of Science ®Google Scholar
• Taghiyari HR, Karimi AN, Parsapajouh D, Pourtahmasi K. 2010. Study on the longitudinal gas permeability of juvenile wood and mature wood. Spec Top Rev Porous Media Int J. 1(1):31–38. doi: 10.1615/SpecialTopicsRevPorousMedia.v1.i1.30
   Google Scholar
• Taghiyari HR, Moradi Malek M. 2014. Effect of heat treatment on longitudinal gas and liquid permeability of circular and square-shaped native hardwood specimens. Heat Mass Transfer. 50(4):1125–1136. doi: 10.1007/s00231-014-1319-z
   Web of Science ®Google Scholar
• Tajvidi M, Gardner DJ, Bousfield DW. 2016. Cellulose nanomaterials as binders: laminate and particulate systems. J Renew Mater. 4(5):365–376. doi: 10.7569/JRM.2016.634103
   Web of Science ®Google Scholar
• Tjeerdsma BF, Militz H. 2005. Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als Roh und Werkstoff. 63:102–111. doi: 10.1007/s00107-004-0532-8
   Web of Science ®Google Scholar
• USPTO. 2009. Gas permeability measurement apparatus; patent number 8079249 B2.
   Google Scholar
• Xu H, Taghiyari HR, Clauson M, Milota MR, Morrell JJ. 2019. Effect of supercritical carbon dioxide treatment on gas permeability of Paulownia fortunei heartwood and sapwood. Wood Fiber Sci. 51(1):1–5. doi: 10.22382/wfs-2019-007
   Web of Science ®Google Scholar