Benchmarking moisture prediction in kiln-dried Pacific Coast hemlock wood

References

• Abellan-Nebot JV, Subiron FR. 2010. A review of machining monitoring systems based on artificial intelligence process models. Int J Adv Manuf Technol. 47(1-4):237–257.
   Web of Science ®Google Scholar
• Avramidis S, Oliveira L. 1993. Influence of presteaming on kiln-drying of thick hem-fir lumber. For Prod J. 43(11/12):7–12.
   Web of Science ®Google Scholar
• Ayanleye S, Nasir V, Avramidis S, Cool J. 2021. Effect of wood surface roughness on prediction of structural timber properties by infrared spectroscopy using ANFIS, ANN, and PLS regression. Eur J Wood Wood Prod. 79(1):101–115.
   Web of Science ®Google Scholar
• Ayanleye S, Udele K, Nasir V, Zhang X, Militz H. 2022. Durability and protection of mass timber structures: a review. J Build Eng. 46:103731.
   Web of Science ®Google Scholar
• Bradic S. 2005. Impact of juvenile wood on the drying characteristics of Pacific Coast hemlock structural timber [M.Sc. Thesis] Vancouver (BC): University of British Columbia; p. 152.
   Google Scholar
• Cabardo SJ. 2007. Variability in physical and transport properties regarding drying behavior for regrowth and plantation blackbutt timber in New South Wales. Ph.D. dissertation University of Sidney, South Wales, Australia, p. 109.
   Google Scholar
• Cai L, Oliveira LC. 2004. Equalizing and conditioning spruce-pine-subalpine fir lumber. For Prod J. 54(12):126–131.
   Web of Science ®Google Scholar
• Ceylan I. 2008. Determination of drying characteristics of timber by using artificial neural networks and mathematical models. Drying Technol. 26(12):1469–1476.
   Web of Science ®Google Scholar
• Chen Y, Xu P, Chu Y, Li W, Wu Y, Ni L, Bao Y, Wang K. 2017. Short-term electrical load forecasting using the support vector regression (SVR) model to calculate the demand response baseline for office buildings. Appl Energy. 195(139):659–670.
   Google Scholar
• Cronin KP, Abodayeh K, Caro-Corrales J. 2002. Probabilistic analysis and design of the industrial lumber drying process. Dry Technol. 20(2):307–324.
   Web of Science ®Google Scholar
• Cronin KP, Baucour P., Abodayeh K, Barbot Da Silva A. 2003. Probabilistic analysis of timber drying schedules. Dry Technol. 21(8):1435–1458.
   Web of Science ®Google Scholar
• Elustondo DM, Avramidis S. 2002. Stochastic numerical model for radio frequency vacuum drying of lumbers. Dry Technol. 20(9):1827–1842.
   Web of Science ®Google Scholar
• Elustondo DM, Avramidis S. 2005. Comparative analysis of three methods for stochastic lumber drying simulation. Dry Technol. 23(1-2):131–142.
   Web of Science ®Google Scholar
• Elustondo DM, Oliveira L. 2009. A method for optimizing lumber sorting before kiln-drying. For Prod J. 59(9):45–50.
   Web of Science ®Google Scholar
• Fathi H, Kazemirad S, Nasir V. 2020a. A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials. Mater Struct. 53(6):1–14.
   Web of Science ®Google Scholar
• Fathi H, Nasir V, Kazemirad S. 2020b. Prediction of the mechanical properties of wood using guided wave propagation and machine learning. Constr Build Mater. 262:120848.
   Web of Science ®Google Scholar
• Fu Z, Avramidis S, Zhao J, Cai Y. 2017. Artificial neural network modeling for predicting elastic strain of white birch disks during drying. Eur J Wood and Wood Prod. 75(6):949–955.
   Google Scholar
• Hao B, Avramidis S. 2004. Annual ring orientation effect and slope of grain in hemlock timber drying. For Prod J. 54(11): 41–49.
   Web of Science ®Google Scholar
• Hornik K, Stinchcombe M, White H. 1989. Multilayer feedforward networks are universal approximators. Neural Netw. 2(5):359–366.
   Web of Science ®Google Scholar
• Li M, Avramidis S, Oliveira LC, Hartley I. 1997. The effect of vertical air gaps, air velocities and fan revolutions on the drying characteristics of thick Pacific Coast hemlock lumber. Holzforschung. 51(4):381–387.
   Web of Science ®Google Scholar
• Masoudi S, Sima M, Tolouei-Rad M. 2018. Comparative study of ANN and ANFIS models for predicting temperature in machining. J Eng Sci Technol. 13(1):211–225.
   Web of Science ®Google Scholar
• Morris PI. 1995. Pacific silver fir is the more-treatable component of hem-fir from coastal British Columbia. For Prod J. 45(9):37.
   Google Scholar
• Nasir V, Cool J. 2020a. Characterization, optimization, and acoustic emission monitoring of airborne dust emission during wood sawing. Int J Adv Manuf Technol. 109(9):2365–2375.
   Web of Science ®Google Scholar
• Nasir V, Cool J. 2020b. Intelligent wood machining monitoring using vibration signals combined with self-organizing maps for automatic feature selection. Int J Adv Manuf Technol. 108(5):1811–1825.
   Google Scholar
• Nasir V, Cool J, Sassani F. 2019a. Intelligent machining monitoring using sound signal processed with the wavelet method and a self-organizing neural network. IEEE Rob Autom Lett. 4(4):3449–3456.
   Google Scholar
• Nasir V, Cool J, Sassani F. 2019b. Acoustic emission monitoring of sawing process: artificial intelligence approach for optimal sensory feature selection. Int J Adv Manuf Technol. 102(9-12):4179–4197.
   Google Scholar
• Nasir V, Fathi H, Kazemirad S. 2021. Combined machine learning–wave propagation approach for monitoring timber mechanical properties under UV aging. Struct Health Monit. 20(4):2035–2053.
   Web of Science ®Google Scholar
• Nasir V, Kooshkbaghi M, Cool J. 2020. Sensor fusion and random forest modeling for identifying frozen and green wood during lumber manufacturing. Manuf Lett. 26:53–58.
   Google Scholar
• Nasir V, Kooshkbaghi M, Cool J, Sassani F. 2021. Cutting tool temperature monitoring in circular sawing: measurement and multi-sensor feature fusion-based prediction. Int J Adv Manuf Technol. 112(9):2413–2424.
   Web of Science ®Google Scholar
• Nasir V, Nourian S, Zhou Z, Rahimi S, Avramidis S, Cool J. 2019. Classification and characterization of thermally modified timber using visible and near-infrared spectroscopy and artificial neural networks: a comparative study on the performance of different NDE methods and ANNs. Wood Sci Technol. 53(5):1093–1109.
   Web of Science ®Google Scholar
• Nasir V, Sassani F. 2021. A review on deep learning in machining and tool monitoring: methods, opportunities, and challenges. Int J Adv Manuf Technol. 115(9):2683–2709.
   Web of Science ®Google Scholar
• Nourian S. 2018. Thermal modification of western hemlock (Tsuga heterophylla) [M.Sc. Thesis]. Vancouver (BC): University of British Columbia; p. 72.
   Google Scholar
• Oliveira LC, Wallace JW. 2001. Examining some drying/re-drying options for 105 mm × 105 mm green hem-fir lumber. Forintek Canada Corp. Report prepared for CFLA; p. 17.
   Google Scholar
• Park YS, Lek S. 2016. Artificial neural networks: multilayer perceptron for ecological modeling. In: Sven Erik Jørgensen, editor. Developments in environmental modeling. Vol. 28. Elsevier; p. 123–140. https://doi.org/10.1016/B978-0-444-63623-2.00007-4.
   Google Scholar
• Perre P. 2007. Fundamental wood drying. In: European COST. France: Nancy; p. 366.
   Google Scholar
• Rahimi S, Avramidis S. 2022. Predicting moisture content in kiln dried timbers using machine learning. Eur J Wood Wood Prod. 80:681–692.
   Web of Science ®Google Scholar
• Rahimi S, Avramidis S, Lazarescu C. 2021. Estimating moisture content variation in kiln dried pacific coast hemlock. Holzforschung. DOI:10.1515/hf-2021-0080
   PubMedGoogle Scholar
• Rahimi S, Faezipour M, Tarmian A. 2011. Drying of internal-check prone poplar lumber using three different conventional kiln drying schedules. J Indian Acad Wood Sci. 8(1):6–10.
   Google Scholar
• Rahimi S, Nasir V, Avramidis S, Sassani F. 2021. Wood moisture monitoring and classification in kiln-dried timber. Struct Control Health. 29(4): e2911.
   Google Scholar
• Sackey EK, Avramidis S, Oliveira LC. 2004. Exploratory evaluation of oscillation drying for thick hemlock timbers. Holzforschung. 58(4):428–433.
   Web of Science ®Google Scholar
• Rohrbach K. 2008. Schedule and post-drying storage effects on Western hemlock squares quality [M.Sc. Thesis] Vancouver (BC): University of British Columbia; p. 113.
   Google Scholar
• Sablani SS, Kacimov A, Perret J, Mujumdar AS, Campo A. 2005. Noniterative estimation of heat transfer coefficients using artificial neural network models. Int J Heat Mass Transfer. 48(3-4):665–679.
   Google Scholar
• Salas C, Moya R. 2014. Kiln-, solar-, and air-drying behavior of lumber of Tectona grandis and Gmelina arborea from fast-grown plantations: moisture content, wood color, and drying defects. Dry Technol. 32(3):301–310.
   Web of Science ®Google Scholar
• Schubert M, Luković M, Christen H. 2020. Prediction of mechanical properties of wood fiber insulation boards as a function of machine and process parameters by random forest. Wood Sci Technol. 54(3):703–713.
   Web of Science ®Google Scholar
• Shahverdi M. 2015. Kiln drying optimization for quality hem-fir lumber [M.Sc. Thesis]. Vancouver (BC): University of British Columbia; p. 91.
   Google Scholar
• Shahverdi M, Oliveira L, Avramidis S. 2017. Kiln-drying optimization for quality pacific coast hemlock timber. Dry Technol. 35(15):1867–1873.
   Web of Science ®Google Scholar
• Siau JF. 1995. Wood: influence of moisture on physical properties. Blacksburg: Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University. p. 227.
   Google Scholar
• Steinberg D. 2009. ‘CART: classification and regression trees. In: X Wu, V Kumar, editors. The top ten algorithms in data mining. Boca Raton (FL): CRC Press; p. 179–202.
   Google Scholar
• Sugeno M. 1985. Industrial applications of fuzzy control. Amsterdam: Elsevier.
   Google Scholar
• Van Blokland J, Nasir V, Cool J, Avramidis S, Adamopoulos S. 2021a. Machine learning-based prediction of internal checks in weathered thermally modified timber. Constr Build Mater. 281:122193.
   Web of Science ®Google Scholar
• Van Blokland J, Nasir V, Cool J, Avramidis S, Adamopoulos S. 2021b. Machine learning-based prediction of surface checks and bending properties in weathered thermally modified timber. Constr Build Mater. 307:124996.
   Web of Science ®Google Scholar
• Wada N. 2013. Internal moisture movement in hem-fir timbers exposed to ambient conditions following kiln drying [M.Sc. Thesis] Vancouver (BC): University of British Columbia; p. 65.
   Google Scholar
• Watanabe K, Hayashi T, Kobayashi I. 2016. Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method. J Wood Sci. 62(6):479–486.
   Google Scholar
• Watanabe K, Kobayashi I, Matsushita Y, Saito S, Kuroda N, Noshiro S. 2014. Application of near-infrared spectroscopy for evaluation of drying stress on lumber surface: a comparison of artificial neural networks and partial least squares regression. Dry Technol. 32(5):590–596.
   Web of Science ®Google Scholar
• Watanabe K, Matsushita Y, Kobayashi I, Kuroda N. 2013. Artificial neural network modeling for predicting final moisture content of individual Sugi (Cryptomeria japonica) samples during air-drying. J Wood Sci. 59(2):112–118.
   Web of Science ®Google Scholar
• Witczak M, Korbicz J, Mrugalski M, Patton RJ. 2006. A GMDH neural network-based approach to robust fault diagnosis: application to the DAMADICS benchmark problem. Control Eng Pract. 14(6):671–683.
   Google Scholar
• Wu H, Avramidis S. 2006. Prediction of timber kiln drying rates by neural networks. Dry Technol. 24(12):1541–1545.
   Web of Science ®Google Scholar
• Yilmaz I, Kaynar O. 2011. Multiple regression, ANN (RBF, MLP), and ANFIS models for prediction of swell potential of clayey soils. Expert Syst Appl. 38(5):5958–5966.
   Web of Science ®Google Scholar
• Zhou Z, Rahimi S, Avramidis S, Fang Y. 2020. Species- and moisture-based sorting of green timber mix with near infrared spectroscopy. BioResources. 15(1):317–330.
   Web of Science ®Google Scholar