The effect of deposition angle on morphology and diameter of electrospun TiO₂/PVP nanofibers

References

• Zhang X, Shi X, Gautrot JE, et al. Nanoengineered electrospun fibers and their biomedical applications: a review. Nanocomposites. 2021;7(1):1–34.
   Google Scholar
• Fridrikh SV, Jian HY, Brenner MP, et al. Controlling the fiber diameter during electrospinning. Phys Rev Lett. 2003;90(14):144502.
   Google Scholar
• Al-Hazeem NZA. Nanofibers and Electrospinning Method. Nov Nanomater Synth Appl. 2018;191–210.
   Google Scholar
• Patra S, Easteal A, Bhattacharyya D. Parametric study of manufacturing poly (lactic) acid nanofibrous mat by electrospinning. J Mater Sci. 2009;44(2):647–654.
   Google Scholar
• Li D, Wang Y, Xia Y. Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays. Nano Lett. 2003;3(8):1167–1171.
   Google Scholar
• Kumar A, Jose R, Fujihara K, et al. Structural and optical properties of electrospun TiO2 nanofibers. Chem Mater. 2007;19(26):6536–6542.
   Google Scholar
• Wu CM, Chiou HG, Lin SL, et al. Effects of electrostatic polarity and the types of electrical charging on electrospinning behavior. J Appl Polym Sci. 2012;126(S2):E89–E97.
   Google Scholar
• Taylor G. Disintegration of water drops in an electric field. Proc R Soc Lond A: Math Phys Eng Sci. 1964;280(1382):383–397.
   Google Scholar
• Al-Hazeem NZ, Ahmed NM. Effect of addition of polyaniline on polyethylene oxide and polyvinyl alcohol for the fabrication of nanorods. ACS Omega. 2020;5(35):22389–22394.
   Google Scholar
• Bhardwaj N, Kundu SC. Electrospinning: a fascinating fiber fabrication technique. Biotechnol Adv. 2010;28(3):325–347.
   Google Scholar
• Zargham S, Bazgir S, Tavakoli A, et al. The effect of flow rate on morphology and deposition area of electrospun nylon 6 nanofiber. J Eng Fibers Fabr. 2012;7(4):42–49.
   Google Scholar
• Pokorný P, Mikes P, Lukas D. Measurement of electric current in liquid jet. Proceedings of the Nanocon International Conference; 2010. p. 12–14.
   Google Scholar
• Bagheri H, Piri-Moghadam H, Rastegar S. Magnetic and electric field assisted electrospun polyamide nanofibers for on-line μ-solid phase extraction and HPLC. RSC Adv. 2014;4(94):52590–52597.
   Google Scholar
• Rodoplu D, Mutlu M. Effects of electrospinning setup and process parameters on nanofiber morphology intended for the modification of quartz crystal microbalance surfaces. J Eng Fibers Fabr. 2012;7(2):118–123.
   Google Scholar
• Al-Hazeem NZ, Ahmed NM, Matjafri M, et al. Hydrogen gas sensor based on nanofibers TiO2-PVP thin film at room temperature prepared by electrospinning. Microsyst Technol. 2021;27(1):293–297.
   Google Scholar
• Erisken C, Kalyon DM, Wang H. Functionally graded electrospun polycaprolactone and beta-tricalcium phosphate nanocomposites for tissue engineering applications. Biomaterials. 2008;29(30):4065–4073.
   Google Scholar
• Sangsanoh P, Suwantong O, Neamnark A, et al. In vitro biocompatibility of electrospun and solvent-cast chitosan substrata towards Schwann, osteoblast, keratinocyte and fibroblast cells. Eur Polym J. 2010;46(3):428–440.
   Google Scholar
• Charernsriwilaiwat N, Opanasopit P, Rojanarata T, et al. Preparation and characterization of chitosan-hydroxybenzotriazole/polyvinyl alcohol blend nanofibers by the electrospinning technique. Carbohydr Polym. 2010;81(3):675–680.
   Google Scholar
• Taylor G. Electrically driven jets. Proc R Soc Lond A: Math Phys Eng Sci. 1969;313(515):453–475.
   Google Scholar
• Doshi J, Reneker DH. Electrospinning process and applications of electrospun fibers. Conference Record of the 1993 IEEE Industry Applications Society Annual Meeting, 1993; IEEE; 1993. p. 1698–1703.
   Google Scholar
• Marsden JE, Tromba A. Vector calculus. London: Macmillan; 2003.
   Google Scholar
• Ma W, Lu Z, Zhang M. Investigation of structural transformations in nanophase titanium dioxide by Raman spectroscopy. Appl Phys A. 1998;66(6):621–627.
   Google Scholar
• Arbiol J, Cerda J, Dezanneau G, et al. Effects of Nb doping on the TiO2 anatase-to-rutile phase transition. J Appl Phys. 2002;92(2):853–861.
   Google Scholar
• Ruiz AM, Dezanneau G, Arbiol J, et al. Insights into the structural and chemical modifications of Nb additive on TiO2 nanoparticles. Chem Mater. 2004;16(5):862–871.
   Google Scholar
• Suresh C, Biju V, Mukundan P, et al. Anatase to rutile transformation in sol-gel titania by modification of precursor. Polyhedron. 1998;17(18):3131–3135.
   Google Scholar
• Gao Y, Masuda Y, Seo W-S, et al. TiO2 nanoparticles prepared using an aqueous peroxotitanate solution. Ceram Int. 2004;30(7):1365–1368.
   Google Scholar
• Qin W, Szpunar J. Origin of lattice strain in nanocrystalline materials. Philos Mag Lett. 2005;85(12):649–656.
   Google Scholar
• Moghaddam HM, Nasirian S. Dependence of activation energy and lattice strain on TiO2 nanoparticles? Nanosci Methods. 2012;1(1):201–212.
   Google Scholar
• Croft M, Zhong Z, Jisrawi N, et al. Strain profiling of fatigue crack overload effects using energy dispersive X-ray diffraction. Int J Fatigue. 2005;27(10–12):1408–1419.
   Google Scholar
• Ghosh P, Oliva J, Rosa E.D., et al. Enhancement of upconversion emission of LaPO4: Er@Yb core–shell nanoparticles/nanorods. J Phys Chem C. 2008;112(26):9650–9658.
   Google Scholar
• Williamson G, Smallman R, III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye-Scherrer spectrum. Philos Mag. 1956;1(1):34–46.
   Google Scholar
• Chinh NQ, Gubicza J, Langdon T. Characteristics of face-centered cubic metals processed by equal-channel angular pressing. J Mater Sci. 2007;42(5):1594–1605.
   Google Scholar