Multi-objective optimization of Resin Infusion

References

• Mahale AD, Prud'homme RK, Rebenfeld L. Characterization of voids formed during liquid impregnation of non-woven multifilament glass networks as related to composite processing. Compos Manuf. 1993;4:199–207.
   Google Scholar
• Patel N, Lee LJ. Modeling of void formation and removal in liquid composite molding. Part I: wettability analysis. Polym Compos. 1996;17:96–103.
   Web of Science ®Google Scholar
• Ruiz E, Achim V, Soukane S, et al. Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites. Compos Sci Technol. 2006;66:475–486.
   Web of Science ®Google Scholar
• Jiang S, Zhang C, Wang B. Optimum arrangement of gate and vent locations for RTM process design using a mesh distance-based approach. Compos Part A Appl Sci Manuf. 2002;33:471–481.
   Web of Science ®Google Scholar
• Kessels JFA, Jonker AS, Akkerman R. Optimising the flow pipe arrangement for resin infusion under flexible tooling. Compos Part A Appl Sci Manuf. 2007;38:2076–2085.
   Web of Science ®Google Scholar
• Ye X, Zhang C, Liang Z, et al. Heuristic algorithm for determining optimal gate and vent locations for RTM process design. J Manuf Syst. 2004;23:267–277.
   Web of Science ®Google Scholar
• Henz BJ, Mohan RV, Shires DR. A hybrid global–local approach for optimization of injection gate locations in liquid composite molding process simulations. Compos Part A Appl Sci Manuf. 2007;38:1932–1946.
   Web of Science ®Google Scholar
• Kim BY, Nam GJ, Lee JW. Optimization of filling process in RTM using a genetic algorithm and experimental design method. Polym Compos. 2002;23:72–86.
   Web of Science ®Google Scholar
• Lin MY, Murphy MJ, Hahn HT. Resin transfer molding process optimization. Compos Part A Appl Sci Manuf. 2000;31:361–371.
   Web of Science ®Google Scholar
• Wang J, Simacek P, Advani SG. Use of centroidal voronoi diagram to find optimal gate locations to minimize mold filling time in resin transfer molding. Compos Part A Appl Sci Manuf. 2016;87:243–255.
   Web of Science ®Google Scholar
• Gokce A, Advani SG. Combinatorial search to optimize vent locations in the presence of disturbances in liquid composite molding processes. Mater Manuf Process. 2003;18:261–285.
   Web of Science ®Google Scholar
• Gokce A, Advani SG. Vent location optimization using map-based exhaustive search in liquid composite molding processes. Mater Manuf Process. 2004;19:523–548.
   Web of Science ®Google Scholar
• Gokce A, Advani SG. Simultaneous gate and vent location optimization in liquid composite molding processes. Compos Part A Appl Sci Manuf. 2004;35:1419–1432.
   Web of Science ®Google Scholar
• Gokce A, Hsiao KT, Advani SG. Branch and bound search to optimize injection gate locations in liquid composite molding processes. Compos Part A Appl Sci Manuf. 2002;33:1263–1272.
   Web of Science ®Google Scholar
• Jiang S, Zhang C, Wang B. A process performance index and its application to optimization of the RTM process. Polym Compos. 2001;22:690–701.
   Web of Science ®Google Scholar
• Luo J, Liang Z, Zhang C, et al. Optimum tooling design for resin transfer molding with virtual manufacturing and artificial intelligence. Compos Part A Appl Sci Manuf. 2001;32:877–888.
   Web of Science ®Google Scholar
• Mathur R, Advani SG, Fink BK. Use of genetic algorithms to optimize gate and vent locations for the resin transfer molding process. Polym Compos. 1999;20:167–178.
   Web of Science ®Google Scholar
• Young WB. Gate location optimization in liquid composite molding using genetic algorithms. J Compos Mater. 1994;28:1098–1113.
   Web of Science ®Google Scholar
• Yu HW, Young WB. Optimal design of process parameters for resin transfer molding. J Compos Mater. 1997;31:1113–1140.
   Web of Science ®Google Scholar
• Ratle F, Achim V, Trochu F. Evolutionary operators for optimal gate location in liquid composite moulding. Appl Soft Comput. 2009;9:817–823.
   Web of Science ®Google Scholar
• PAMRTM® Composites Molding Simulation Software, ESI Group 2013. Available from: www.esi-group.com.
   Google Scholar
• TohoTenax. Delivery programme and characteristics Tenax HTA filament yarn, Toho Tenax Europe GmbH, 2011.
   Google Scholar
• Hexcel® RTM 6 180 °C epoxy system for resin transfer moulding monocomponent system product data. Available from: www.hexcel.com, 2009.
   Google Scholar
• Karkanas PI, Partridge IK. Cure modeling and monitoring of epoxy/amine resin systems. I. Cure kinetics modeling. J Appl Polym Sci. 2000;77:1419–1431.
   Web of Science ®Google Scholar
• Karkanas PI, Partridge IK, Attwood D. Modelling the cure of a commercial epoxy resin for applications in resin transfer moulding. Polym Int. 1996;41:183–191.
   Web of Science ®Google Scholar
• Pascault JP, Williams RJJ. Relationships between glass transition temperature and conversion. Polym Bull. 1990;24:115–121.
   Web of Science ®Google Scholar
• Mesogitis TS, Skordos AA, Long AC. Stochastic simulation of the influence of cure kinetics uncertainty on composites cure. Compos Sci Technol. 2015;110:145–151.
   Web of Science ®Google Scholar
• Farmer JD, Covert EE. Thermal conductivity of a thermosetting advanced composite during its cure. J Thermophys Heat Transfer. 1996;10:467–475.
   Web of Science ®Google Scholar
• Yamane T, Katayama S, Todoki M, et al. The measurement of thermal conductivity of carbon fibers. J Wide Bandgap Mater. 2000;7:294–305.
   Google Scholar
• Skordos AA, Partridge IK. Inverse heat transfer for optimization and on-line thermal properties estimation in composites curing. Inverse. Probl Sci Eng. 2004;12:157–172.
   Web of Science ®Google Scholar
• Karkanas PI, Partridge IK. Cure modeling and monitoring of epoxy/amine resin systems. II. Network formation and chemoviscosity modeling. J Appl Polym Sci. 2000;77:2178–2188.
   Web of Science ®Google Scholar
• Sirtautas J, Pickett AK, George A. Materials characterisation and analysis for flow simulation of liquid resin infusion. Appl Compos Mater. 2015;22:323–341.
   Web of Science ®Google Scholar
• Mesogitis TS, Skordos AA, Long AC. Stochastic heat transfer simulation of the cure of advanced composites. J Compos Mater. 2016;50:2971–2986.
   Web of Science ®Google Scholar
• Zimmermann K, Van Den Broucke B. Assessment of process-induced deformations and stresses in ultra thick laminates using isoparametric 3D elements. J Reinf Plast Compos. 2012;31:163–178.
   Web of Science ®Google Scholar
• Struzziero G, Skordos AA. Multi-objective optimisation of the cure of thick components. Compos Part A Appl Sci Manuf. 2017;93:126–136.
   Web of Science ®Google Scholar
• Bleuler S, Laumanns M, Thiele L, et al. PISA — a platform and programming language independent interface for search algorithms. Berlin (Germany): Springer; 2003. p. 494–508.
   Google Scholar
• Deb K, Pratap A, Agarwal S, et al. A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Trans Evol Comput. 2002;6:182–197.
   Web of Science ®Google Scholar
• Zitzler E, Laumanns M, Thiele L. SPEA2: Improving strength pareto evolutionary algorithm for multiobjective optimisation. Evolutionary methods for design, optimization and control with applications to industrial problems. Proceedings of the EUROGEN'2001; Athens, Greece, 2001. p. 95–100.
   Google Scholar
• Zitzler E, Deb K, Thiele L. Comparison of multiobjective evolutionary algorithms: empirical results. Evol Comput. 2000;8:173–195.
   PubMed Web of Science ®Google Scholar
• Stickler PB, Ramulu M, Johnson PS. Experimental and numerical analysis of transverse stitched T-joints in bending. Compos Struct. 2000;50:17–27.
   Web of Science ®Google Scholar
• Stickler PB, Ramulu M, van West BP. Transverse stitched T-joints in bending with PR520 resin: initial results. J Reinf Plast Compos. 2001;20:65–75.
   Web of Science ®Google Scholar
• Wood MDK, Tong L, Luo Q, et al. Failure of stitched composite L-joints under tensile loading — experiment and simulation. J Reinf Plast Compos. 2009;28:715–742.
   Web of Science ®Google Scholar