References
- Campbell FC. Manufacturing technology for aerospace structural materials. London: Elsevier; 2006.
- Grimes GC. The Adhesive-Honeycomb relationship. Appl Polym Symp. 1965;3:154–190.
- Hayes BS, Seferis JC, Edwards RR. Self-adhesive honeycomb prepreg systems for secondary structural applications. Polym Compos. 1998;19(1):54–64. https://doi.org/https://doi.org/10.1002/pc.10075
- Zebrine D, Anders M, Centea T, et al. Path-dependent bond-line evolution in equilibrated core honeycomb sandwich structures. Adv Manuf Polym Compos Sci. 2020;6(3):127–141. https://doi.org/https://doi.org/10.1080/20550340.2020.1800194
- Darrow DC, Propatic PA, Brayden TH. Elimination of mold surface porosity on composite parts. J Adv Mater. 1995;27:41–46.
- Kratz J, Hubert P. Evaluation of core material on skin quality for out-of-autoclave honeycomb panels. In: Proc SAMPE 2012; 2012.
- Tavares SS, Caillet-Bois N, Michaud V, et al. Vacuum-bag processing of sandwich structures: role of honeycomb pressure level on skin–core adhesion and skin quality. Compos Sci Technol. 2010;70(5):797–803. https://doi.org/https://doi.org/10.1016/j.compscitech.2010.01.015
- Brayden TH. Darrow DC. Effect of cure cycle parameters on 350 °F cocured epoxy honeycomb core panels. In Proceeding of the 34th International SAMPE Symposium; 1989.
- Jouin P, Pollock D, Rudisill E. Effects of processing variables on the quality of co-cured sandwich panels. Compos Mater: Test Desi. 1992:283–307. https://doi.org/https://doi.org/10.1520/stp20164s
- Alteneder AW, Renn D, Seferis JC, Curran RN. Processing and characterization studies of honeycomb composite structures. In; 38th Internatonal SAMPE Symposium; 1993.
- Yuan C, Li M, Zhang Z, et al. Experimental investigation on the co-cure processing of honeycomb structure with self-adhesive prepreg. Appl Compos Mater. 2008;15(1):47–59. https://doi.org/https://doi.org/10.1007/s10443-008-9056-4
- Kardos J, Duduković M, Dave R. Void growth and resin transport during processing of thermosetting - matrix composites. Adv Polym Sci. 1986;80:101–123. https://doi.org/https://doi.org/10.1007/3-540-16423-5_13.
- Tang JM, Lee WI, Springer GS. Effects of cure pressure on resin flow, voids, and mechanical properties. J Compos Mater. 1987;21(5):421–440. https://doi.org/https://doi.org/10.1177/002199838702100502
- Hamill L, Centea T, Nutt S. Surface porosity during vacuum bag-only prepreg processing: Causes and mitigation strategies. Compos Part A Appl Sci Manuf. 2015;75:1–10. https://doi.org/https://doi.org/10.1016/j.compositesa.2015.04.009
- Bloom LD, Napper MA, Ward C, et al. On the evolution of the distribution of entrapped air at the tool/first ply interf‘ace during lay-up and debulk. Adv Manuf Polym Compos Sci. 2015;1(1):36–43. https://doi.org/https://doi.org/10.1179/2055035914Y.0000000005
- Hu W, Grunenfelder LK, Centea T, et al. In situ monitoring and analysis of void evolution in unidirectional prepreg. J Compos Mater. 2018;52(21):2847–2858. https://doi.org/https://doi.org/10.1177/0021998318759183
- Hu W, Centea T, Nutt S. Mechanisms of inter-ply void formation during vacuum bag-only cure of woven prepregs. Polym Compos. 2020;41(5):1785–1795. https://doi.org/https://doi.org/10.1002/pc.25497
- Anders M, Zebrine D, Centea T, et al. Process diagnostics for co-cure of sandwich structures using in situ visualization. Compos Part A Appl Sci Manuf. 2018;116:24–35. https://doi.org/https://doi.org/10.1016/j.compositesa.2018.09.029.
- Lo J, Nutt S. Method for in situ analysis of volatiles generated during cure of composites. Compos Part A Appl Sci Manuf. 2019;123:141–148. https://doi.org/https://doi.org/10.1016/j.compositesa.2019.05.013.
- Hubert P, Johnston A, Poursartip A, et al. Cure kinetics and viscosity models for hexcel 8552 epoxy resin. In: International SAMPE Symposium and Exhibition; 2001. p. 2341–2354.
- Van Ee D, Poursartip A. NCAMP hexply material properties database for use with COMPRO CCA and raven. Wichita, KS: National Center for Advanced Materials Performance (NCAMP); 2009, p. 141.
- Centea T, Zebrine D, Anders M, et al. Manufacturing of honeycomb core sandwich structures: Film adhesive behavior versus cure pressure and temperature. Proceedings of the Composites and Advanced Materials Expo, 2016.
- Martin J, Putnam JW, Hayes BS, et al. Effect of impregnation conditions on prepreg properties and honeycomb core crush. Polym Compos. 1997;18:90–99.
- Hsiao H-M, Lee S, Buyny R. Core crush problem in the manufacturing of composite sandwich structures: mechanisms and solutions. Aiaa J. 2006;44(4):901–907. https://doi.org/https://doi.org/10.2514/1.18067
- Kratz J, Hubert P. Processing out-of-autoclave honeycomb structures: internal core pressure measurements. Compos Part A Appl Sci Manuf. 2011;42(8):1060–1065. https://doi.org/https://doi.org/10.1016/j.compositesa.2011.04.009