Influence and role of feedstock Si and Al content in Geopolymer synthesis

References

• De Silva P, Sagoe-Crentsil K, Sirivivatnanon V. Kinetics of geopolymerization: role of Al2O3 and SiO2. Cement Concrete Res. 2007;37:512–518.10.1016/j.cemconres.2007.01.003
   Web of Science ®Google Scholar
• Diaz EI, Allouche EN. Recycling of fly ash into geopolymer concrete: creation of a database. Green Technol. Conf., IEEE. 2010;1–7.
   Google Scholar
• Duxson P, Provis JL. Designing precursors for geopolymer cements. J. Am. Ceram. Soc. 2008;91:3864–3869.10.1111/jace.2008.91.issue-12
   Web of Science ®Google Scholar
• Diaz EI, Allouche EN, Eklund S. Factors affecting the suitability of fly ash as source material for geopolymers. Fuel. 2010;89:992–996.10.1016/j.fuel.2009.09.012
   Web of Science ®Google Scholar
• Duxson P, Mallicoat SW, Lukey GC, Kriven WM, Van Deventer JSJ. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers. Colloids Surf., A. 2007;292:8–20.10.1016/j.colsurfa.2006.05.044
   Web of Science ®Google Scholar
• Fletcher RA, MacKenzie KJD, Nicholson CL, Shimada S. The composition range of aluminosilicate geopolymers. J. Eur. Ceram. Soc. 2005;25:1471–1477.10.1016/j.jeurceramsoc.2004.06.001
   Web of Science ®Google Scholar
• Autef A, Joussein E, Gasgnier G, Rossignol S. Role of the silica source on the geopolymerization rate. J. Non-Cryst. Solids. 2012;358:2886–2893.10.1016/j.jnoncrysol.2012.07.015
   Web of Science ®Google Scholar
• Chindaprasirt P, De Silva P, Sagoe-Crentsil K, Hanjitsuwan S. Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems. J. Mater. Sci. 2012;47:4876–4883.10.1007/s10853-012-6353-y
   Web of Science ®Google Scholar
• Thakur RN, Ghosh S. Effect of mix composition on compressive strength and microstructure of fly ash based geopolymer composites. J. Eng. Appl. Sci. 2009;4:68–74.
   Google Scholar
• Williams Ross P, Van Riessen A. Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD. Fuel. 2010;89:3683–3692.10.1016/j.fuel.2010.07.031
   Web of Science ®Google Scholar
• van Jaarsveld JGS, van Deventer JSJ, Lukey GC. The characterisation of source materials in fly ash-based geopolymers. Mater. Lett. 2003;57:1272–1280.10.1016/S0167-577X(02)00971-0
   Web of Science ®Google Scholar
• Brouwers HJH, Van Eijk RJ. Fly ash reactivity: extension and application of a shrinking core model and thermodynamic approach. J. Mater. Sci. 2002;37:2129–2141.10.1023/A:1015206305942
   Web of Science ®Google Scholar
• Pietersen HS, Fraay ALA, Bijen JM. Reactivity of fly ash at high pH. MRS Proceedings, Cambridge University Press. 1989;178:139–157.
   Google Scholar
• Chen-Tan NW, Van Riessen A, Ly CV, Southam DC. Determining the reactivity of a fly ash for production of geopolymer. J. Am. Ceram. Soc. 2009;92:881–887.10.1111/jace.2009.92.issue-4
   Web of Science ®Google Scholar
• Fernández-Jiménez A, Palomo A, Sobrados I, Sanz J. The role played by the reactive alumina content in the alkaline activation of fly ashes. Micropor. Mesopor. Mater. 2006;91:111–119.10.1016/j.micromeso.2005.11.015
   Web of Science ®Google Scholar
• Rickard WDA, Williams R, Temuujin J, van Riessen A. Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications. Mater. Sci. Eng. A. 2011;528:3390–3397.10.1016/j.msea.2011.01.005
   Web of Science ®Google Scholar
• Kovalchuk G, Fernández-Jiménez A, Palomo A. Alkali-activated fly ash. Relationship between mechanical strength gains and initial ash chemistry. Materiales de construccion. 2008;58:35–52.
   Web of Science ®Google Scholar
• Chindaprasirt P, Rattanasak U, Vongvoradit P, Jenjirapanya S. Thermal treatment and utilization of Al-rich waste in high calcium fly ash geopolymeric materials. Int. J. Miner. Metall. Mater. 2012;19:872–878.10.1007/s12613-012-0641-z
   Web of Science ®Google Scholar
• Scotford RF, Glanstonbury JR. Effect of temperature on the rate of dissolution of gibbsite and boehmite. Can. J. Chem. Eng. 1971;49:611–616.10.1002/cjce.v49:5
   Web of Science ®Google Scholar
• Addai-Mensah J, Dawe J, Ralston J. Dissolution and Interaction of gibbsite in alkaline media. In: XXI International mineral processing congress; 2000; Rome, Italy.
   Google Scholar
• Weng L, Sagoe-Crentsil K, Brown T, Song S. Effects of aluminates on the formation of geopolymers. Mater. Sci. Eng. B. 2005;117:163–168.10.1016/j.mseb.2004.11.008
   Web of Science ®Google Scholar
• Weng L, Sagoe-Crentsil K. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systems. J. Mater. Sci. 2007;42:2997–3006.10.1007/s10853-006-0820-2
   Web of Science ®Google Scholar
• De Silva P, Sagoe-Crentsil K. Medium-term phase stability of Na2O–Al2O3–SiO2–H2O geopolymer systems. Cement Concrete Res. 2008;38:870–876.10.1016/j.cemconres.2007.10.003
   Web of Science ®Google Scholar
• Oh JE, Moon J, Mancio M, Clark SM, Monteiro PJM. Bulk modulus of basic sodalite, Na8[AlSiO4]6(OH)2·2H2O, a possible zeolitic precursor in coal-fly-ash-based geopolymers. Cement and Concrete Res. 2011;41:107–112.10.1016/j.cemconres.2010.09.012
   Web of Science ®Google Scholar
• Hajimohammadi A, Provis JL, Van Deventer JSJ. Effect of alumina release rate on the mechanism of geopolymer gel formation. Chem. Mater. 2010;22:5199–5208.10.1021/cm101151n
   Web of Science ®Google Scholar
• Buchwald A, Zellmann HD, Kaps C. Condensation of aluminosilicate gels—model system for geopolymer binders. J. Non-Cryst. Solids. 2011;357:1376–1382.10.1016/j.jnoncrysol.2010.12.036
   Web of Science ®Google Scholar
• Xuemin C, Yan H, Leping L, Jinyu C. NaA zeolite synthesis from geopolymer precursor. MRS Commun. 2011;1:49–51.10.1557/mrc.2011.15
   Web of Science ®Google Scholar
• Zhang Z, Wang H, Provis JL. Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. J. Sustain. Cement-Based Mater. 2012;1:154–166.10.1080/21650373.2012.752620
   Google Scholar
• Fernández-Jiménez A, Palomo A. Characterisation of fly ashes. Potential reactivity as alkaline cements. Fuel. 2003;82:2259–2265.
   Web of Science ®Google Scholar
• Álvarez-Ayuso E, Querol X, Plana F, Alastuey A, Moreno N, Izquierdo M, Font O, Moreno T, Diez S, Vázquez E, Barra M. Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes. J. Hazard. Mater. 2008;154:175–183.10.1016/j.jhazmat.2007.10.008
   PubMed Web of Science ®Google Scholar
• Burciaga-Díaz O, Magallanes-Rivera RX, Escalante-García JI. Alkali-activated slag-metakaolin pastes: strength, structural, and microstructural characterization. J. Sustain. Cement-Based Mater. 2013;2:111–127.10.1080/21650373.2013.801799
   Google Scholar
• Xu H, Van Deventer JSJ. The geopolymerisation of alumino-silicate minerals. Int. J. Miner. Process. 2000;59:247–266.10.1016/S0301-7516(99)00074-5
   Web of Science ®Google Scholar
• Chancey RT. Characterization of crystalline and amorphous phases and respective reactivities in a class F Fly Ash [PhD]. Austin (TX):University of Texas; 2008.
   Google Scholar
• Hajimohammadi A, Provis JL, Van Deventer JSJ. One-part geopolymer mixes from geothermal silica and sodium aluminate. Ind. Eng. Chem. Res. 2008;47:9396–9405.
   Web of Science ®Google Scholar
• Chen C, Gong W, Lutze W, Pegg I. Kinetics of fly ash geopolymerization. J. Mater. Sci. 2011;46:3073–3083.10.1007/s10853-010-5186-9
   Web of Science ®Google Scholar
• Chen C, Gong W, Lutze W, Pegg I, Zhai J. Kinetics of fly ash leaching in strongly alkaline solutions. J. Mater. Sci. 2011;46:590–597.10.1007/s10853-010-4997-z
   Web of Science ®Google Scholar