Binding gel characterization of alkali-activated binders based on palm oil fuel ash (POFA) and fly ash

References

• Damtoft JS, Lukasik J, Herfort D, et al. Sustainable development and climate change initiatives. Cem Concr Res. 2008;38:115–127.
   Web of Science ®Google Scholar
• Provis JL. Green concrete or red herring? – future of alkali-activated materials. Adv Appl Ceram. 2014;113:472–477.10.1179/1743676114Y.0000000177
   Web of Science ®Google Scholar
• Diaz EII, Allouche ENN, Eklund S. Factors affecting the suitability of fly ash as source material for geopolymers. Fuel. 2010;89:992–996.10.1016/j.fuel.2009.09.012
   Web of Science ®Google Scholar
• Fernández-Jiménez AM, Palomo A, López-Hombrados C. Engineering properties of alkali-activated fly ash concrete. ACI Mater J. 2006;103:106–112.
   Web of Science ®Google Scholar
• Guo X, Shi H, Dick WA. Compressive strength and microstructural characteristics of class C fly ash geopolymer. Cem Concr Compos. 2010;32:142–147.10.1016/j.cemconcomp.2009.11.003
   Web of Science ®Google Scholar
• van Deventer JSJ, Provis JL, Duxson P, et al. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. J Hazard Mater. 2007;139:506–513.10.1016/j.jhazmat.2006.02.044
   PubMed Web of Science ®Google Scholar
• Chindaprasirt P, Homwuttiwong S, Jaturapitakkul C. Strength and water permeability of concrete containing palm oil fuel ash and rice husk-bark ash. Constr Build Mater. 2007;21:1492–1499.10.1016/j.conbuildmat.2006.06.015
   Web of Science ®Google Scholar
• Davidovits J. Synthesis of new high-temperature geo-polymers for reinforced plastic/composites. SPE PACTEC 79 Soc Plast Eng. 1979;4–151.
   Google Scholar
• Davidovits J. Geopolymers J Therm Anal. 1991;37:1633–1656.10.1007/BF01912193
   Web of Science ®Google Scholar
• Fernández-Jiménez A, Palomo A, Criado M. Microstructure development of alkali-activated fly ash cement: a descriptive model. Cem Concr Res. 2005;35:1204–1209.10.1016/j.cemconres.2004.08.021
   Web of Science ®Google Scholar
• Brough A, Atkinson A. Sodium silicate-based, alkali-activated slag mortars. Cem Concr Res. 2002;32:865–879.10.1016/S0008-8846(02)00717-2
   Web of Science ®Google Scholar
• Tangchirapat W, Jaturapitakkul C, Chindaprasirt P. Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete. Constr Build Mater. 2009;23:2641–2646.10.1016/j.conbuildmat.2009.01.008
   Web of Science ®Google Scholar
• Hassan IO, Ismail M, Forouzani P, et al. Flow characteristics of ternary blended self-consolidating cement mortars incorporating palm oil fuel ash and pulverised burnt clay. Constr Build Mater. 2014;64:253–260.10.1016/j.conbuildmat.2014.04.057
   Web of Science ®Google Scholar
• Sata V, Jaturapitakkul C, Kiattikomol K. Utilization of palm oil fuel ash in high-strength concrete. J Mater Civ Eng. 2004;16:623–628.10.1061/(ASCE)0899-1561(2004)16:6(623)
   Web of Science ®Google Scholar
• Foo KY, Hameed BH. Value-added utilization of oil palm ash: a superior recycling of the industrial agricultural waste. J Hazard Mater. 2009;172:523–531.10.1016/j.jhazmat.2009.07.091
   PubMed Web of Science ®Google Scholar
• Tangchirapat W, Jaturapitakkul C. Strength, drying shrinkage, and water permeability of concrete incorporating ground palm oil fuel ash. Cem Concr Compos. 2010;32:767–774.10.1016/j.cemconcomp.2010.08.008
   Web of Science ®Google Scholar
• Megat Johari MA, Zeyad AM, Muhamad Bunnori N, et al. Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash. Constr Build Mater. 2012;30:281–288.10.1016/j.conbuildmat.2011.12.007
   Web of Science ®Google Scholar
• Altwair NM, Megat Johari MA, Saiyid Hashim SF. Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash. Constr Build Mater. 2012:518–525.10.1016/j.conbuildmat.2012.08.003
   Web of Science ®Google Scholar
• Al-mulali MZ, Awang H, Abdul Khalil HPS, et al. The incorporation of oil palm ash in concrete as a means of recycling: A review. Cem Concr Compos. 2015;55:129–138.10.1016/j.cemconcomp.2014.09.007
   Web of Science ®Google Scholar
• Hussin MW, Bhutta MAR, Azreen M, et al. Performance of blended ash geopolymer concrete at elevated temperatures. Mater Struct. 2014;48:709–720.
   Web of Science ®Google Scholar
• Tay JH, Show KY. Use of ash derived from oil-palm waste incineration as a cement replacement material. Res Conserv Recycl. 1995;13:27–36.10.1016/0921-3449(94)00012-T
   Web of Science ®Google Scholar
• ASTM. Standard specification for coal fly ash and raw or calcined natural pozzolan for use. Annu B ASTM Stand. 2003:3–6.
   Google Scholar
• Puertas F, Martı́nez-Ramı́rez S, Alonso S, et al. Alkali-activated fly ash/slag cements: strength behaviour and hydration products. Cem Concr Res. 2000;30:1625–1632.10.1016/S0008-8846(00)00298-2
   Web of Science ®Google Scholar
• Bakharev T. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing. Cem Concr Res. 2005;35:1224–1232.10.1016/j.cemconres.2004.06.031
   Web of Science ®Google Scholar
• Speyer R. Thermal Analysis of materials: dilatometry and interferometry. New York (NY): CRC Press; 1993.
   Google Scholar
• de Vargas AS, Dal Molin DCC, Masuero ÂB, et al. Strength development of alkali-activated fly ash produced with combined NaOH and Ca(OH)2 activators. Cem Concr Compos. 2014;53:341–349.10.1016/j.cemconcomp.2014.06.012
   Web of Science ®Google Scholar
• Oh JE, Monteiro PJM, Jun SS, et al. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers. Cem Concr Res. 2010;40:189–196.10.1016/j.cemconres.2009.10.010
   Web of Science ®Google Scholar
• Ismail I, Bernal SA, Provis JL, et al. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash. Cem Concr Compos. 2014;45:125–135.10.1016/j.cemconcomp.2013.09.006
   Web of Science ®Google Scholar
• Duxson P, Mallicoat SW, Lukey GC, et al. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers. Colloids Surf, A. 2007;292:8–20.10.1016/j.colsurfa.2006.05.044
   Web of Science ®Google Scholar
• García-Lodeiro I, Fernández-Jiménez A, Blanco M, et al. FTIR study of the sol-gel synthesis of cementitious gels: C–S–H and N–A–S–H. J Sol-Gel Sci Technol. 2008;45:63–72.10.1007/s10971-007-1643-6
   Web of Science ®Google Scholar
• Farmer VC. The infrared spectra of minerals. London: Mineralogical Society; 1974.10.1180/mono-4
   Google Scholar
• Zhang Z, Wang H, Provis JL. Quantitative study of the reactivity of fly ash in geopolymerization by FTIR. J Sustain Cem Mater. 2012;1:154–166.
   Google Scholar
• Garcia-Lodeiro I, Palomo A, Fernández-Jiménez A, et al. Compatibility studies between N–A–S–H and C–A–S–H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O. Cem Concr Res. 2011;41:923–931.10.1016/j.cemconres.2011.05.006
   Web of Science ®Google Scholar
• Ismail I, Bernal SA, Provis JL, et al. Drying-induced changes in the structure of alkali-activated pastes. J Mater Sci. 2013;48:3566–3577.10.1007/s10853-013-7152-9
   Web of Science ®Google Scholar
• Hanjitsuwan S, Hunpratub S, Thongbai P, et al. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste. Cem Concr Compos. 2014;45:9–14.10.1016/j.cemconcomp.2013.09.012
   Web of Science ®Google Scholar
• Barrer RM, Mainwaring DE. Chemistry of soil minerals. Part XIII. Reactions of metakaolinite with single and mixed bases. J Chem Soc Dalton Trans. 1972:2534–2546.10.1039/dt9720002534
   Google Scholar
• Zhang Z, Wang H, Provis JL. The reactivity of fly ash in geopolymer synthesis: a qualification study by FTIR. J Sustain Cem Mater. 2012;1:6–8.
   Google Scholar
• Pacheco-Torgal F, Castro-Gomes J, Jalali S. Alkali-activated binders: a review. Constr Build Mater. 2008;22(7):1305–1314.10.1016/j.conbuildmat.2007.10.015
   Web of Science ®Google Scholar
• Richardson IG. The nature of C–S–H in hardened cements. Cem Concr Res. 1999;29:1131–1147.10.1016/S0008-8846(99)00168-4
   Web of Science ®Google Scholar
• Salih MA, Abang Ali AA, Farzadnia N. Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste. Constr Build Mater. 2014;65:592–603.10.1016/j.conbuildmat.2014.05.031
   Web of Science ®Google Scholar
• Escalante García JI, Campos-Venegas K, Gorokhovsky A, et al. Cementitious composites of pulverised fuel ash and blast furnace slag activated by sodium silicate: effect of Na2O concentration and modulus. Adv Appl Ceram. 2006;105:201–208.10.1179/174367606X120151
   Web of Science ®Google Scholar