Early age shrinkage cracking of restrained metakaolin-slag-palm oil fuel ash binder geopolymer mortars

References

• Yuan Y, Ji Y, Jiang J. Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate. Mater Struct. 2009;42(10):1443–1450.10.1617/s11527-008-9464-9
   Web of Science ®Google Scholar
• Zou D, Weiss J. Early age cracking behavior of internally cured mortar restrained by dual rings with different thickness. Constr Build Mater. 2014;66:146–153.10.1016/j.conbuildmat.2014.05.032
   Web of Science ®Google Scholar
• Turner LK, Collins FG. Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete. Constr Build Mater. 2013;43:125–130.10.1016/j.conbuildmat.2013.01.023
   Web of Science ®Google Scholar
• Ridtirud C, Chindaprasirt P, Pimraksa K. Factors affecting the shrinkage of fly ash geopolymers. Int J Min Metall Mater. 2011;18(1):100–104.10.1007/s12613-011-0407-z
   Web of Science ®Google Scholar
• Holt E, Leivo M. Cracking risks associated with early age shrinkage. Cement Concrete Comp. 2004;26(5):521–530.10.1016/S0958-9465(03)00068-4
   Web of Science ®Google Scholar
• Aldred J, Day J, editors. Is geopolymer concrete a suitable alternative to traditional concrete. 37th Conference on our world in concrete & structures, Singapore; 2012.
   Google Scholar
• Chen W, Brouwers HJH. The hydration of slag, part 1: reaction models for alkali-activated slag. J Mater Sci. 2006;42(2):428–443. doi:10.1007/s10853-006-0873-2.
   Web of Science ®Google Scholar
• Borges PR, Banthia N, Alcamand HA, et al. Performance of blended metakaolin/blastfurnace slag alkali-activated mortars. Cement Concrete Comp. 2016;71:42–52.
   Web of Science ®Google Scholar
• Karim M, Zain MFM, Jamil M, et al. Development of a zero-cement binder using slag, fly ash, and rice husk ash with chemical activator. Adv Mater Sci Eng. 2015;2015:14. doi:10.1155/2015/247065
   Google Scholar
• Hossain AB, Fonseka A, Bullock H. Early age stress development, relaxation, and cracking in restrained low W/B ultrafine fly ash mortars. J Adv Concr Tech. 2008;6(2):261–271.10.3151/jact.6.261
   Web of Science ®Google Scholar
• Hossain AB, Weiss J. Assessing residual stress development and stress relaxation in restrained concrete ring specimens. Cement Concrete Comp. 2004;26(5):531–540.10.1016/S0958-9465(03)00069-6
   Web of Science ®Google Scholar
• Xu H, Van Deventer JS. Geopolymerisation of multiple minerals. Miner Eng. 2002;15(12):1131–1139.10.1016/S0892-6875(02)00255-8
   Web of Science ®Google Scholar
• Song S, Sohn D, Jennings H, et al. Hydration of alkali-activated ground granulated blast furnace slag. J Mater Sci. 2000;35(1):249–257.10.1023/A:1004742027117
   Web of Science ®Google Scholar
• Abdullah K, Nasly M, Hussin MW, et al., editors. Properties of aerated concrete containing various amount of palm oil fuel ash, water content and binder sand ratio. Chemical, Biological and Environmental Engineering (ICBEE), 2010 2nd International Conference on; 2010: IEEE.
   Google Scholar
• Castel A, Foster S, Ng T, et al. Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer Concrete. Mater Struct. 2016;49(5):1619–1628.10.1617/s11527-015-0599-1
   Web of Science ®Google Scholar
• Tangchirapat W, Khamklai S, Jaturapitakkul C. Use of ground palm oil fuel ash to improve strength, sulfate resistance, and water permeability of concrete containing high amount of recycled concrete aggregates. Mater Design. 2012;41:150–157.10.1016/j.matdes.2012.04.054
   Web of Science ®Google Scholar
• Bernal SA, Rodríguez ED, Mejía de Gutiérrez RM, et al. Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends. J Mater Sci. 2011;46(16):5477–5486.10.1007/s10853-011-5490-z
   Web of Science ®Google Scholar
• Yusuf MO, Megat Johari MA, Ahmad ZA, et al. Effects of H2O/Na2O molar ratio on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash based concrete. Mater Design. 2014;56:158–164. doi:10.1016/j.matdes.2013.09.078.
   Web of Science ®Google Scholar
• Sharmin A, Alengaram UJ, Jumaat MZ, et al. Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar. Constr Build Mater. 2017;144:608–623.10.1016/j.conbuildmat.2017.03.178
   Web of Science ®Google Scholar
• Islam A, Alengaram UJ, Jumaat MZ, et al. The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar. Mater Des. 2014;56:833–841. doi:10.1016/j.matdes.2013.11.080.
   Web of Science ®Google Scholar
• Rangan BV. Low-calcium fly ash-based geopolymer concrete. Perth: Curtin University of Technology; 2008.
   Google Scholar
• ASTM C494. Standard Specification for Chemical Admixtures for Concrete. West Conshohocken PA: ASTM International.
   Google Scholar
• Aldahdooh MA, Muhamad Bunnori NBN, Megat Johari MA. Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash. Constr Build Mater. 2013;48:379–389.10.1016/j.conbuildmat.2013.07.007
   Web of Science ®Google Scholar
• Montemarano J. Restrained shrinkage behavior of high performance concrete containing slag: Rutgers University-Graduate School-New Brunswick; 2009.
   Google Scholar
• ASTM C192. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM C1581. Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage. West Conshohocken, Pennsylvania (USA): ASTM International.
   Google Scholar
• ASTM C109. Standard test method for compressive strength of hydraulic cement mortar. West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM C496. Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM C469. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. West Conshohocken, PA: ASTM International.
   Google Scholar
• Standard A. 1012.13. 1992. Methods of Testing Concrete; Method 13: Determination of the Drying Shrinkage of the Concrete Samples Prepared in the Field or in the Laboratory.
   Google Scholar
• ASTMC1581-04. Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage. West Conshohocken, PA: ASTM International; 2004.
   Google Scholar
• Hossain AB, Weiss J. The role of specimen geometry and boundary conditions on stress development and cracking in the restrained ring test. Cem Concr Res. 2006;36(1):189–199.10.1016/j.cemconres.2004.06.043
   Web of Science ®Google Scholar
• Kong DL, Sanjayan JG, Sagoe-Crentsil K. Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures. J Mater Sci. 2008;43(3):824–831.10.1007/s10853-007-2205-6
   Web of Science ®Google Scholar
• Adam AA. Strength and durability properties of alkali activated slag and fly ash-based geopolymer concrete. Melbourne: RMIT University Melbourne; 2009.
   Google Scholar
• Yusuf MO, Megat Johari MA, Ahmad ZA, et al. Shrinkage and strength of alkaline activated ground steel slag/ultrafine palm oil fuel ash pastes and mortars. Mater Des. 2014b;63:710–718.10.1016/j.matdes.2014.06.062
   Web of Science ®Google Scholar
• Hua Xu, Jannie SJ, Deventer V. Geopolymerisation of multiple minerals. Min Eng. 2002;15(12):1131–1139.
   Web of Science ®Google Scholar
• Nematzadeh M, Naghipour M Compressive strength and modulus of elasticity of freshly compressed concrete. Constr Build Mater. 2012 2012/09/01/;34(Supplement C):476-485. doi: https://doi.org/10.1016/j.conbuildmat.2012.02.055.
   Google Scholar
• Güneyisi E, Gesoğlu M, Karaoğlu S, et al. Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes. Constr Build Mater. 2012;34:120–130. doi:10.1016/j.conbuildmat.2012.02.017.
   Web of Science ®Google Scholar
• Aktas K, Najm H, Suksawang N. Cracking potential in high performance concrete (hpc) under restrained conditions. Awarie budowlane. 2011;24–27.
   Google Scholar
• Schlitter J, Bentz D, Weiss W. Quantifying stress development and remaining stress capacity in restrained, internally cured mortars. ACI Mater J. 2013;110(1):3–11.
   Web of Science ®Google Scholar
• Dally J, Riley W. Strain-measurement methods and related instrumentation. Experimental stress analysis. 3rd ed. New York: McGraw-Hill Inc; 1991;184.
   Google Scholar
• Shen D, Shi H, Tang X, et al. Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens. Constr Build Mater. 2016;120:309–320.10.1016/j.conbuildmat.2016.05.048
   Web of Science ®Google Scholar
• Timoshenko SP, Goodier JN. Theory of elasticity. London, New York: McGraw-Hill; 1970.
   Google Scholar
• Aly T, Sanjayan JG. Factors contributing to early age shrinkage cracking of slag concretes subjected to 7-days moist curing. Mater Struct. 2008;41(4):633–642.10.1617/s11527-007-9269-2
   Web of Science ®Google Scholar
• Li C, Sun H, Li L. A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements. Cem Concr Res. 2010;40(9):1341–1349.10.1016/j.cemconres.2010.03.020
   Web of Science ®Google Scholar
• Aboshia AMA, Rahmat RA, Zain MFM, et al. Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. Int J Build Pathol Adapt. 2017;35(5):438–455.10.1108/IJBPA-03-2017-0014
   Web of Science ®Google Scholar