References
- Malešev M, Radonjanin V, Marinković S. Recycled concrete as aggregate for structural concrete production. Sustainability. 2010;2(5):1204–1225.
- Safiuddin M, Alengaram UJ, Rahman MM, et al. Use of recycled concrete aggregate in concrete: a review. J Civil Eng Manag. 2013;19(6):796–810.
- Limbachiya M, Koulouris A, Roberts J, Fried A, editors. Performance of recycled aggregate concrete. Proceeding of RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development; 2004. p. 127–136.
- Kim YH, Trejo D, Atahan HN, et al. Mechanical property prediction for high early strength self-consolidating concrete. J Mater Civil Eng. 2012;24(12):1501–1512.
- Yrjanson WA. Recycling of Portland cement concrete pavements. Transportation Research Board, National Research Council, Washington, D.C; 1989. http://www.trb.org/Publications/Blurbs/154476.aspx
- Günçan NF. Using waste concrete as aggregate. Cem Concr Res. 1995;25(7):1385–1390.
- Shaikh FUA, Nguyen HL. Properties of concrete containing recycled construction and demolition wastes as coarse aggregates. J Sustain Cem Based Mater. 2013;2(3–4):204–217.
- Rahal K. Mechanical properties of concrete with recycled coarse aggregate. Build Environ. 2007;42(1):407–415.
- Ajdukiewicz A, Kliszczewicz A. Influence of recycled aggregates on mechanical properties of HS/HPC. Cem Concr Compos. 2002;24(2):269–279.
- Hansen TC. Recycling of demolished concrete and masonry. Report if Technical Committee 37-DRC Demolition and Reuse of Concrete, The International Unon of Testing and Research Laboratories for Materials and Structures, Taylor & Francis Group; 2014.
- Evangelista L, de Brito J. Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cem Concr Compos. 2007;29(5):397–401.
- Gutiérrez A, editor. Influence of recycled aggregate quality on concrete properties. International RILEM Conference on the Use of Recycled Materials in Building and Structures; Barcelona, Spain: RILEM Publications SARL; 2004.
- Anderson KW, Uhlmeyer JS, Russell MA. Use of recycled concrete aggregate in PCCP: literature search. Washington State Department of Transportation (WSDOT) Research Report; 2009.
- Hwang C-L, Liu J, Lee L, et al. Densified mixture design algorithm and early properties of high performance concrete. J Chin Inst Civil Hydrau Eng. 1996;8(2):217–219.
- Chern J, Hwang C, Tsai D. Research and development of HPC in Taiwan. Concr Int. 1995;17(10):71–76.
- Li L, Hwang C, editors. A quality assurance system of SCC in Taiwan. Proceedings of the First North American Conference on the Design and Use of Consolidating Concrete; Chicago, US, 2002. p. 275–280.
- Yang K-H, Chung H-S, Ashour AF. Influence of type and replacement level of recycled aggregates on concrete properties. ACI Materials Journal. 2008;105(3):289–296.
- Boukendakdji O, Kadri E-H, Kenai S. Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete. Cem Concr Compos. 2012;34(4):583–590.
- Nunes S, Figueiras H, Oliveira PM, et al. A methodology to assess robustness of SCC mixtures. Cem Concr Res. 2006;36(12):2115–2122.
- Ardalan RB, Joshaghani A, Hooton RD. Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume. Constr Build Mater. 2017;134:116–122.
- Berndt M. Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate. Constr Build Mater. 2009;23(7):2606–2613.
- Figueiras H, Nunes S, Coutinho JS, et al. Combined effect of two sustainable technologies: self-compacting concrete (SCC) and controlled permeability formwork (CPF). Constr Build Mater. 2009;23(7):2518–2526.
- Çolak A. Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer. Cem Concr Res. 2005;35(8):1510–1521.
- Aggarwal L, Thapliyal P, Karade S. Properties of polymer-modified mortars using epoxy and acrylic emulsions. Constr Build Mater. 2007;21(2):379–383.
- Jafari K, Tabatabaeian M, Joshaghani A, et al. Optimizing the mixture design of polymer concrete: an experimental investigation. Constr Build Mater. 2018;167:185–196.
- Steward P, Hearn J, Wilkinson M. An overview of polymer latex film formation and properties. Adv Colloid Interface Sci. 2000;86(3):195–267.
- Çavdar A, Sevin S, Kaya Y, et al. The effects of cure conditions on mechanical properties of polymer modified cement mortars. Balkan J Electr Comput Eng. 2014;2(2):79–85.
- Ohama Y. Handbook of polymer-modified concrete and mortars: properties and process technology. New Jersey, USA: William Andrew, Noyes Publications; 1995.
- Ribeiro MSS, Gonçalves AF, Branco F. Styrene-butadiene polymer action on compressive and tensile strengths of cement mortars. Mater Struct. 2008;41(7):1263–1273.
- Gomes CEM, Ferreira OP, Fernandes MR. Influence of vinyl acetate-versatic vinylester copolymer on the microstructural characteristics of cement pastes. Mater Res. 2005;8(1):51–56.
- Aliabdo AAE, Abd_Elmoaty A. Experimental investigation on the properties of polymer modified SCC. Constr Build Mater. 2012;34:584–592.
- AzariJafari H, Kazemian A, Rahimi M, et al. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete. Constr Build Mater. 2016;113:215–220.
- Guo Y, Shen A, Sun X. Exploring polymer-modified concrete and cementitious coating with high-durability for roadside structures in Xinjiang, China. Adv Mater Sci Eng. 2017;2017:1.
- Muhit I. Dosage limit determination of superplasticizing admixture and effect evaluation on properties of concrete. Int J Sci Eng Res. 2013;4(3):1–4.
- EFNARC. Specifications and guidelines for self-consolidating concrete in European federation of suppliers of specialist construction chemicals. London (UK): EFNARC; 2002.
- Askarian M, Fakhretaha Aval S, Joshaghani A. A comprehensive experimental study on the performance of pumice powder in self-compacting concrete (SCC). J Sustain Cem Based Mater. 2018;7(6):340–356.
- ASTM International. Standard test method for compressive strength of cylindrical concrete specimens. C39. West Conshohocken; 2001.
- ASTM International. Standard test method for splitting tensile strength of cylindrical concrete specimens. C496. West Conshohocken; 2001.
- ASTM International. Standard test method for flexural strength of concrete (using simple beam with third-point loading). C09. West Conshohocken: Committee C09 on Concrete and Concrete Aggregates; 2016.