230
Views
7
CrossRef citations to date
0
Altmetric
Articles

Management of sanitary ware wastes as supplementary cementing materials in concretes

ORCID Icon, ORCID Icon &

References

  • Wilson DC, Rodic L, Modak P, et al. Global waste management outlook. Nairobi: United Nations Environment Programme (UNEP); 2015.
  • Guerra I, Vivar I, Llamas B, et al. Eco-efficient concretes: the effects of using recycled ceramic material from sanitary installations on the mechanical properties of concrete. Waste Manag. 2009;29:643–646.
  • Zimbili O, Salim W, Ndambuki M. A review on the usage of ceramic wastes in concrete production. Int J Civ Env Struc Constr Archit Eng. 2014;8:91–95.
  • Medina C, Sáez del Bosque IF, Asensio E, et al. Mineralogy and microstructure of hydrated phases during the pozzolanic reaction in the sanitary ware waste/CaOH2 system. J Am Ceram Soc. 2016;99:340–348.
  • Galán E, Aparicio P. Materias primas para la industria cerámica. [Raw materials for the ceramic industry]. Sem Soc Esp Min. 2006; 2:31–49. Spanish.
  • Lavat AE, Trezza MA, Poggi M. Characterization of ceramic roof tile wastes as pozzolanic admixture. Waste Manag. 2009;29:1666–1674.
  • Baraldi L. World sanitary ware production and exports. Ceram World Rev. 2016;114:56–65.
  • Medina C, Frías M, de Rojas MI. Leaching in concretes containing recycled ceramic aggregate from the sanitary ware industry. J Clean Prod. 2014;66:85–91.
  • Medina C, Banfill PF, de Rojas MS, et al. Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste. Constr Build Mater. 2013;40:822–831.
  • Ferrara L, Deegan P, Pattarini A, et al. Recycling ceramic waste powder: effects its grain-size distribution on fresh and hardened properties of cement pastes/mortars formulated from SCC mixes. J Sustain Cem Based Mater. 2019;8:145–160.
  • Reig L, Borrachero MV, Monzó JM, et al. Use of ceramic sanitaryware as an alternative for the development of new sustainable binders. Key Eng Mater. 2015;668:172–180.
  • Farinha C, de Brito J, Veiga R. Incorporation of fine sanitary ware aggregates in coating mortars. Constr Build Mater. 2015;83:194–206.
  • Jackiewicz-Rek W, Załęgowski K, Garbacz A, et al. Properties of cement mortars modified with ceramic waste fillers. Procedia Eng. 2015;108:681–687.
  • Lucas J, de Brito J, Veiga R, et al. The effect of using sanitary ware as aggregates on rendering mortars’ performance. Mater Des. 2016;91:155–164.
  • Keshavarz Z, Mostofinejad D. Porcelain and red ceramic wastes used as replacements for coarse aggregate in concrete. Constr Build Mater. 2019;195:218–230.
  • Pitarch AM, Reig L, Tomás AE, et al. Effect of tiles, bricks and ceramic sanitary-ware recycled aggregates on structural concrete properties. Waste Biomass Valor. 2019;10:1779–1793.
  • Siddique S, Shrivastava S, Chaudhary S. Influence of ceramic waste on the fresh properties and compressive strength of concrete. Eur J Environ Civ Eng. 2019;23:212–225.
  • ASTM C150/C150M. 2019. Standard specification for Portland cement. West Conshohocken, PA: ASTM International.
  • ASTM C618. 2012. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. West Conshohocken, PA: ASTM International.
  • Chakchouk A, Trifi L, Samet B, et al. Formulation of blended cement: effect of process variables on clay pozzolanic activity. Constr Build Mater. 2009;23:1365–1373.
  • Puligilla S, Mondal P. Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction. Cem Concr Res. 2015;70:39–49.
  • Percival HJ, Duncan JF, Foster PK. Interpretation of the kaolinite‐mullite reaction sequence from infrared absorption spectra. J Am Ceram Soc. 1974;57:57–61.
  • Sykes D, Sato R, Luth RW, et al. Water solubility mechanisms in KAlSi3O8 melts at high pressure. Geochim Cosmochim Acta. 1993;57:3575–3584.
  • Voll D, Angerer P, Beran A, et al. A new assignment of IR vibrational modes in mullite. Vibr Spectrosc. 2002;30:237–243.
  • Magi M, Lippmaa E, Samoson A, et al. Solid-state high-resolution silicon-29 chemical shifts in silicates. J Phys Chem. 1984;88:1518–1522.
  • Nampi PP, Moothetty P, Berry FJ, et al. Aluminosilicates with varying alumina–silica ratios: synthesis via a hybrid sol–gel route and structural characterisation. Dalton Trans. 2010;39:5101–5107.
  • Padmaja P, Anilkumar GM, Mukundan P, et al. Characterisation of stoichiometric sol–gel mullite by Fourier transform infrared spectroscopy. Int J Inorg Mater. 2001;3:693–698.
  • Popa M, Kakihana M, Yoshimura M, et al. Zircon formation from amorphous powder and melt in the silica-rich region of the alumina–silica–zirconia system. J Non-Crystalline Solids. 2006;352:5663–5669.
  • EN 196-5. 2011. Methods of testing cement. Pozzolanicity test for pozzolanic cement. London: British Standard Institution.
  • Powers TC. The non-evaporable water content of hardened Portland cement paste. ASTM Bull. 1949;158:68–75.
  • ASTM C143/C143M. 2015. Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA: ASTM International.
  • ASTM C39/C39M. 2018. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.
  • ASTM C496/C496M. 2017. Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.
  • ASTM C469/C469M. 2014. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. West Conshohocken, PA: ASTM International.
  • ASTM C1585. 2013. Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. West Conshohocken, PA: ASTM International.
  • ASTM C1556-11a. 2016. Standard test method for determining the apparent chloride diffusion coefficient of cementitious mixtures by bulk diffusion. West Conshohocken, PA: ASTM International.
  • ASTM C1152/C1152M. 2012. Standard test method for acid-soluble chloride in mortar and concrete. West Conshohocken, PA: ASTM International.
  • ASTM C1218/C1218M. 2017. Standard test method for water-soluble chloride in mortar and concrete. West Conshohocken, PA: ASTM International.
  • Zhang C, Wang A, Tang M, et al. The filling role of pozzolanic material. Cem Concr Res. 1996;26:943–947.
  • Yu P, Kirkpatrick RJ, Poe B, et al. Structure of calcium silicate hydrate (C-S-H): near, mid, and far infrared spectroscopy. J Am Ceram Soc. 2004;82:742–748.
  • Lin KL, Wu HH, Shie JL, et al. Recycling waste brick from construction and demolition of buildings as pozzolanic materials. Waste Manag Res. 2010;28:653–659.
  • de Lucas EA, Medina C, Frías M, et al. Clay-based construction and demolition waste as a pozzolanic addition in blended cements. Effect on sulfate resistance. Constr Build Mater. 2016;127:950–958.
  • Trezza M. Estudio de las posibles alteraciones en el comportamiento del cemento portland por incorporación de impurezas (óxidos y sales inorgánicas) durante el proceso de clinkerización [master’s thesis]. Buenos Aires: Universidad Nacional del Centro de la Provincia de Buenos Aires; 1998.
  • Matschei T, Lothenbach B, Glasser FP. The AFm phase in Portland cement. Cem Concr Res. 2007;37:118–130.
  • ACI 318. 2014. Building Code Requirements for Structural Concrete: an ACI standard: commentary on building code requirements for structural concrete. Farmington Hills, MI: American Concrete Institute.
  • Sabir BB, Wild S, Bai J. Metakaolin and calcined clays as pozzolans for concrete: a review. Cem Concr Compos. 2001;23:441–454.
  • Li S, Roy DM. Investigation of relations between porosity, pore structure, and C1− diffusion of fly ash and blended cement pastes. Cem Concr Res. 1986;16:749–759.
  • de Gutiérrez RM, Rodríguez C, Rodríguez E, et al. Concreto adicionado con metacaolín: Comportamiento a carbonatación y cloruros [Concrete added with metacaolin: behavior to carbonation and chlorides]. Rev Fac Ing. 2009;48:55–64. Spanish.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.