Utilization of industrial waste materials for the production of lightweight aggregates: a review

References

• Afroughsabet V, Geng G, Lin A, et al. The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete. Cem Concr Compos. 2019;96:21–32.
   Web of Science ®Google Scholar
• Arora S, Singh S. Probability of failure of RCA concrete with ternary blended cements. Constr Build Mater. 2019;225:401–414.
   Web of Science ®Google Scholar
• Huang T, Shi F, Tanikawa H, et al. Materials demand and environmental impact of buildings construction and demolition in China based on dynamic material flow analysis. Resour Conserv Recycl. 2013;72:91–101.
   Web of Science ®Google Scholar
• Safiuddin M, Abdus Salam M, Jumaat MZ. Utilization of palm oil fuel ash in concrete: a review. J Civil Eng Manage. 2011;17(2):234–247.
   Web of Science ®Google Scholar
• Ramachandran VS. Waste and by-products as concrete aggregates. Canadian Building Digest. 1981;215.
   Google Scholar
• Khan MZN, Shaikh FUA, Hao Y, et al. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash. Constr Build Mater. 2016;125:809–820.
   Web of Science ®Google Scholar
• Rafieizonooz M, Mirza J, Salim MR, et al. Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. Constr Build Mater. 2016;116:15–24.
   Web of Science ®Google Scholar
• Rehman MU, Rashid K, Haq EU, et al. Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization. Constr Build Mater. 2020;232:117290.
   Web of Science ®Google Scholar
• Fanijo E, Babafemi AJ, Arowojolu O. Performance of laterized concrete made with palm kernel shell as replacement for coarse aggregate. Constr Build Mater. 2020;250:118829.
   Web of Science ®Google Scholar
• Alengaram UJ. Performance evaluation of industrial by-products as sustainable practice against the exploitation of virgin materials.Int. Com. SCMT Conf. 2019: 416–427
   Google Scholar
• Noushini A, Castel A. The effect of heat-curing on transport properties of low-calcium fly ash-based geopolymer concrete. Constr Build Mater. 2016;112:464–477.
   Web of Science ®Google Scholar
• Lim YC, Lin S-K, Ju Y-R, et al. Reutilization of dredged harbor sediment and steel slag by sintering as lightweight aggregate. Process Safety Environ Protect. 2019;126:287–296.
   Web of Science ®Google Scholar
• Kockal NU, Ozturan T. Durability of lightweight concretes with lightweight fly ash aggregates. Constr Build Mater. 2011;25(3):1430–1438.
   Web of Science ®Google Scholar
• Lo TY, Cui H, Memon SA, et al. Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete. J Cleaner Prod. 2016;112:753–762.
   Web of Science ®Google Scholar
• AhmadTavio HH. Experimental study of cold–bonded artificial lightweight aggregate concrete. AIP Conference Proceedings. AIP Publishing LLC; 2018. p. 030011.
   Google Scholar
• Chung S-Y, Abd Elrahman M, Sikora P, et al. Evaluation of the effects of crushed and expanded waste glass aggregates on the material properties of lightweight concrete using image-based approaches. Materials. 2017;10(12):1354.
   Web of Science ®Google Scholar
• Wei Y-L, Cheng S-H, Ou K-T, et al. Effect of calcium compounds on lightweight aggregates prepared by firing a mixture of coal fly ash and waste glass. Ceram Int. 2017;43(17):15573–15579.
   Web of Science ®Google Scholar
• Wei N. Leachability of heavy metals from lightweight aggregates made with sewage sludge and municipal solid waste incineration fly ash. Int J Environ Res Public Health. 2015;12(5):4992–5005.
   PubMed Web of Science ®Google Scholar
• Salami BA, Johari MAM, Ahmad ZA, et al. Durability performance of palm oil fuel ash-based engineered alkaline-activated cementitious composite (POFA-EACC) mortar in sulfate environment. Constr Build Mater. 2017;131:229–244.
   Web of Science ®Google Scholar
• Kockal NU, Ozturan T. Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes. J Hazard Mater. 2010;179(1–3):954–965.
   PubMed Web of Science ®Google Scholar
• Bernhardt M, Tellesbø H, Justnes H, et al. Fibre reinforced lightweight aggregates. J Eur Ceram Soc. 2014;34(5):1341–1351.
   Web of Science ®Google Scholar
• Liu P, Farzana R, Rajarao R, et al. Lightweight expanded aggregates from the mixture of waste automotive plastics and clay. Constr Build Mater. 2017;145:283–291.
   Web of Science ®Google Scholar
• Bui LAT, Hwang CL, Chen CT, et al. Characteristics of cold-bonded lightweight aggregate produced with different mineral admixtures, applied mechanics and materials. AMM. 2012;174–177:978–983.
   Google Scholar
• Bui LA-t, Hwang C-l, Chen C-t, et al. Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete. Constr Build Mater. 2012;35:1056–1062.
   Web of Science ®Google Scholar
• Juengsuwattananon K, Winnefeld F, Chindaprasirt P, et al. Correlation between initial SiO2/Al2O3, Na2O/Al2O3, Na2O/SiO2 and H2O/Na2O ratios on phase and microstructure of reaction products of metakaolin-rice husk ash geopolymer. Constr Build Mater. 2019;226:406–417.
   Web of Science ®Google Scholar
• Liao Y-C, Huang C-Y. Effects of heat treatment on the physical properties of lightweight aggregate from water reservoir sediment. Ceram Int. 2011;37(8):3723–3730.
   Web of Science ®Google Scholar
• Huang C, Pan JR, Liu Y. Mixing water treatment residual with excavation waste soil in brick and artificial aggregate making. J Environ Eng. 2005;131(2):272–277.
   Web of Science ®Google Scholar
• Anh Tuan BL, Tesfamariam MG, Chen Y-Y, et al. Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. J Constr Eng Manage. 2014;140(5):04014005.
   Web of Science ®Google Scholar
• Chiou I-J, Chen C-H, Lin C-L. Performance of adding waste glass and sewage sludge to reservoir-sediment aggregates. Comput Concr. 2014;13(1):83–96.
   Web of Science ®Google Scholar
• Ayati B, Ferrándiz-Mas V, Newport D, et al. Use of clay in the manufacture of lightweight aggregate. Constr Build Mater. 2018;162:124–131.
   Web of Science ®Google Scholar
• Cheeseman C, Virdi G. Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash. Resour Conserv Recycl. 2005;45(1):18–30.
   Web of Science ®Google Scholar
• Soltan AMM, Kahl W-A, Abd EL-Raoof F, et al. Lightweight aggregates from mixtures of granite wastes with clay. J Cleaner Prod. 2016;117:139–149.
   Web of Science ®Google Scholar
• Kristály F, Szabó R, Mádai F, et al. Lightweight composite from fly ash geopolymer and glass foam. J Sustain Cement-Based Mater. 2020;10(1):1–22.
   Web of Science ®Google Scholar
• Terzić A, Pezo L, Mitić V, et al. Artificial fly ash based aggregates properties influence on lightweight concrete performances. Ceram Int. 2015;41(2):2714–2726.
   Web of Science ®Google Scholar
• Jo B-w, Park S-k, Park J-b. Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA). Cem Concr Compos. 2007;29(2):128–135.
   Web of Science ®Google Scholar
• Bertolini L, Carsana M, Cassago D, et al. MSWI ashes as mineral additions in concrete. Cem Concr Res. 2004;34(10):1899–1906.
   Web of Science ®Google Scholar
• Tang P, Florea M, Brouwers H. Employing cold bonded pelletization to produce lightweight aggregates from incineration fine bottom ash. J Cleaner Prod. 2017;165:1371–1384.
   Web of Science ®Google Scholar
• Cioffi R, Colangelo F, Montagnaro F, et al. Manufacture of artificial aggregate using MSWI bottom ash. Waste Manag. 2011;31(2):281–288.
   PubMed Web of Science ®Google Scholar
• Zhang B, Poon CS. Internal curing effect of high volume furnace bottom ash (FBA) incorporation on lightweight aggregate concrete. J Sustain Cement-Based Mater. 2017;6(6):366–383.
   Web of Science ®Google Scholar
• Lynn CJ, Obe RKD, Ghataora GS. Municipal incinerated bottom ash characteristics and potential for use as aggregate in concrete. Constr Build Mater. 2016;127:504–517.
   Web of Science ®Google Scholar
• de Sensale GR. Strength development of concrete with rice-husk ash. Cem Concr Compos. 2006;28(2):158–160.
   Web of Science ®Google Scholar
• Nazari A, Riahi S. The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete. Compos Part B: Eng. 2011;42(3):570–578.
   Web of Science ®Google Scholar
• Mo KH, Ling T-C, Alengaram UJ, et al. Overview of supplementary cementitious materials usage in lightweight aggregate concrete. Constr Build Mater. 2017;139:403–418.
   Web of Science ®Google Scholar
• Zhang C, Li S, Bao S. A facile and green method for the synthesis of hierarchical ZSM-5 zeolite aggregates from rice husk ash. Res Chem Intermed. 2018;44(5):3581–3595.
   Web of Science ®Google Scholar
• Chindaprasirt P, Jaturapitakkul C, Rattanasak U. Influence of fineness of rice husk ash and additives on the properties of lightweight aggregate. Fuel. 2009;88(1):158–162.
   Web of Science ®Google Scholar
• Do Kim K, Choi KY, Yang JW. Formation of spherical hollow silica particles from sodium silicate solution by ultrasonic spray pyrolysis method. Colloids Surf A. 2005;254(1–3):193–198.
   Google Scholar
• Souza MM, Anjos MA, Sá MV, et al. Developing and classifying lightweight aggregates from sewage sludge and rice husk ash. Case Stud Constr Mater. 2020;12:e00340.
   Google Scholar
• Colangelo F, Cioffi R. Use of cement kiln dust, blast furnace slag and marble sludge in the manufacture of sustainable artificial aggregates by means of cold bonding pelletization. Materials (Basel). 2013;6(8):3139–3159.
   PubMed Web of Science ®Google Scholar
• Gesoğlu M, Güneyisi E, Mahmood SF, et al. Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete. J Hazard Mater. 2012;235–236:352–358.
   PubMed Web of Science ®Google Scholar
• Lotfy A, Hossain KM, Lachemi M. Mix design and properties of lightweight self-consolidating concretes developed with furnace slag, expanded clay and expanded shale aggregates. J Sustain Cement-Based Mater. 2016;5(5):297–323.
   Web of Science ®Google Scholar
• Shi Y, Chen H, Wang J, et al. Preliminary investigation on the pozzolanic activity of superfine steel slag. Constr Build Mater. 2015;82:227–234.
   Web of Science ®Google Scholar
• Aslam M, Shafigh P, Jumaat MZ, et al. Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete. J Cleaner Prod. 2016;119:108–117.
   Web of Science ®Google Scholar
• Alengaram UJ, Al Muhit BA, bin Jumaat MZ. Utilization of oil palm kernel shell as lightweight aggregate in concrete–a review. Constr Build Mater. 2013;38:161–172.
   Web of Science ®Google Scholar
• Okpala D. Palm kernel shell as a lightweight aggregate in concrete. Build Environ. 1990;25(4):291–296.
   Web of Science ®Google Scholar
• González-Corrochano B, Alonso-Azcárate J, Rodas M. Effect of prefiring and firing dwell times on the properties of artificial lightweight aggregates. Constr Build Mater. 2014;53:91–101.
   Web of Science ®Google Scholar
• Kockal NU, Ozturan T. Optimization of properties of fly ash aggregates for high-strength lightweight concrete production. Mater Des. 2011;32(6):3586–3593.
   Web of Science ®Google Scholar
• Huang C-H, Wang S-Y. Application of water treatment sludge in the manufacturing of lightweight aggregate. Constr Build Mater. 2013;43:174–183.
   Web of Science ®Google Scholar
• Mueller A, Schnell A, Ruebner K. The manufacture of lightweight aggregates from recycled masonry rubble. Constr Build Mater. 2015;98:376–387.
   Web of Science ®Google Scholar
• González-Corrochano B, Alonso-Azcárate J, Rodríguez L, et al. Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production. Constr Build Mater. 2016;116:252–262.
   Web of Science ®Google Scholar
• Lau P, Teo D, Mannan M. Characteristics of lightweight aggregate produced from lime-treated sewage sludge and palm oil fuel ash. Constr Build Mater. 2017;152:558–567.
   Web of Science ®Google Scholar
• Swanepoel J, Strydom C. Utilisation of fly ash in a geopolymeric material. Appl Geochem. 2002;17(8):1143–1148.
   Web of Science ®Google Scholar
• Shivaprasad K, Das B. Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates. Constr Build Mater. 2018;163:428–437.
   Web of Science ®Google Scholar
• Tuan BLA, Hwang C-L, Lin K-L, et al. Development of lightweight aggregate from sewage sludge and waste glass powder for concrete. Constr Build Mater. 2013;47:334–339.
   Web of Science ®Google Scholar
• Liu M, Liu X, Wang W, et al. Effect of SiO2 and Al2O3 on characteristics of lightweight aggregate made from sewage sludge and river sediment. Ceram Int. 2018;44(4):4313–4319.
   Web of Science ®Google Scholar
• Liu M, Wang C, Bai Y, et al. Effects of sintering temperature on the characteristics of lightweight aggregate made from sewage sludge and river sediment. J Alloys Compd. 2018;748:522–527.
   Web of Science ®Google Scholar
• Ayeni O. Performance of a Nigerian metakaolin-based geopolymer as a sustainable building material. 2017.
   Google Scholar
• Hwang C-L, Bui LA-T, Lin K-L, et al. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete. Cem Concr Compos. 2012;34(10):1159–1166.
   Web of Science ®Google Scholar
• Joseph G, Ramamurthy K. Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete. Constr Build Mater. 2009;23(5):1862–1870.
   Web of Science ®Google Scholar
• Manikandan R, Ramamurthy K. Effect of curing method on characteristics of cold bonded fly ash aggregates. Cem Concr Compos. 2008;30(9):848–853.
   Web of Science ®Google Scholar
• Harikrishnan K, Ramamurthy K. Influence of pelletization process on the properties of fly ash aggregates. Waste Manag. 2006;26(8):846–852.
   PubMed Web of Science ®Google Scholar
• Bijen J. Manufacturing processes of artificial lightweight aggregates from fly ash. Int J Cem Compos Lightweight Concrete. 1986;8(3):191–199.
   Google Scholar
• Manikandan R, Ramamurthy K. Influence of fineness of fly ash on the aggregate pelletization process. Cem Concr Compos. 2007;29(6):456–464.
   Web of Science ®Google Scholar
• Rambo DAS, Ukrainczyk N, de Andrade Silva F, et al. Calcium-aluminate mortars at high temperatures: overcoming adverse conversion effects using clinker aggregates. Cem Concr Compos. 2019;96:212–224.
   Web of Science ®Google Scholar
• González-Corrochano B, Alonso-Azcárate J, Rodas M, et al. Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes. Constr Build Mater. 2011;25(8):3591–3602.
   Web of Science ®Google Scholar
• Nitka M, Tejchman J. Comparative DEM calculations of fracture process in concrete considering real angular and artificial spherical aggregates. Eng Fract Mech. 2020;239:107309.
   Web of Science ®Google Scholar
• Gomathi P, Sivakumar A. Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete. Constr Build Mater. 2015;77:276–287.
   Web of Science ®Google Scholar
• Show K-Y, Lee D-J, Tay J-H, et al. Lightweight aggregates from industrial sludge–marine clay mixes. J Environ Eng. 2005;131(7):1106–1113.
   Web of Science ®Google Scholar
• Rickard WD, Riessen Av, Walls P. Thermal character of geopolymers synthesized from class F fly ash containing high concentrations of iron and α‐quartz. Int J Appl Ceram Technol. 2010;7(1):81–88.
   Web of Science ®Google Scholar
• Qi Y, Yue Q, Han S, et al. Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge. J Hazard Mater. 2010;176(1–3):76–84.
   PubMed Web of Science ®Google Scholar
• González-Corrochano B, Alonso-Azcárate J, Rodas M. Production of lightweight aggregates from mining and industrial wastes. J Environ Manage. 2009;90(8):2801–2812.
   PubMed Web of Science ®Google Scholar
• Dondi M, Cappelletti P, D’amore M, et al. Lightweight aggregates from waste materials: reappraisal of expansion behavior and prediction schemes for bloating. Constr Build Mater. 2016;127:394–409.
   Web of Science ®Google Scholar
• Wei Y-L, Lin C-Y, Ko K-W, et al. Preparation of low water-sorption lightweight aggregates from harbor sediment added with waste glass. Mar Pollut Bull. 2011;63(5–12):135–140.
   PubMed Web of Science ®Google Scholar
• Chen H-J, Yang M-D, Tang C-W, et al. Producing synthetic lightweight aggregates from reservoir sediments. Constr Build Mater. 2012;28(1):387–394.
   Web of Science ®Google Scholar
• Liao Y-C, Huang C-Y, Chen Y-M. Lightweight aggregates from water reservoir sediment with added sodium hydroxide. Constr Build Mater. 2013;46:79–85.
   Web of Science ®Google Scholar
• Wu T, Wei H, Liu X, et al. Factors influencing the mechanical properties of lightweight aggregate concrete. 2017;23:301–311.
   Google Scholar
• Hachani MI, Kriker A, Seghiri M. Experimental study and comparison between the use of natural and artificial coarse aggregate in concrete mixture. Energy Procedia. 2017;119:182–191.
   Google Scholar
• Monosi S, Ruello ML, Sani D. Electric arc furnace slag as natural aggregate replacement in concrete production. Cem Concr Compos. 2016;66:66–72.
   Web of Science ®Google Scholar
• Priyadharshini P, Ganesh GM, Santhi A. Experimental study on cold bonded fly ash aggregates. Int J Civil Struct Eng. 2011;2(2):507–515.
   Google Scholar
• B. British Standard. EN 13055-1: 2002: lightweight aggregates–part I: lightweight aggregates for concrete, mortar and grout. British Standards Institution; 2002.
   Google Scholar
• B. EN. 13055-1 Lightweight aggregates for concrete, mortar and grouts. British Standard Online at bsonlinetechindex.co.uk. British Standard Institution; 2002.
   Google Scholar
• Colangelo F, Messina F, Palma LD, et al. Recycling of non-metallic automotive shredder residues and coal fly-ash in cold-bonded aggregates for sustainable concrete. Compos Part B: Eng. 2017;116:46–52.
   Web of Science ®Google Scholar
• Clifton JR, Brown PW, Frohnsdorff G. Uses of waste materials and by-products in construction. Part I. Resour Recov Conserv. 1980;5(2):139–160.
   Google Scholar
• Padhi RS, Patra RK, Mukharjee BB, et al. Influence of incorporation of rice husk ash and coarse recycled concrete aggregates on properties of concrete. Constr Build Mater. 2018;173:289–297.
   Web of Science ®Google Scholar
• Rashid K, Razzaq A, Ahmad M, et al. Experimental and analytical selection of sustainable recycled concrete with ceramic waste aggregate. Constr Build Mater. 2017;154:829–840.
   Web of Science ®Google Scholar
• Rafi MM, Qadir A, Siddiqui SH. Experimental testing of hot mix asphalt mixture made of recycled aggregates. Waste Manag Res. 2011;29(12):1316–1326.
   PubMed Web of Science ®Google Scholar
• Kazmi SMS, Munir MJ, Patnaikuni I, et al. Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction. Constr Build Mater. 2017;148:231–240.
   Web of Science ®Google Scholar
• Abbas S, Kazmi SM, Munir MJ. Potential of rice husk ash for mitigating the alkali-silica reaction in mortar bars incorporating reactive aggregates. Constr Build Mater. 2017;132:61–70.
   Web of Science ®Google Scholar
• B. EN, 1097-6. Tests for mechanical and physical properties of aggregates. Part 6: determination of particle density and water absorption. Brussels (Belgium): BSI Standards Ltd.; 2013.
   Google Scholar
• Chuang K-H, Lu C-H, Chen J-C, et al. Reuse of bottom ash and fly ash from mechanical-bed and fluidized-bed municipal incinerators in manufacturing lightweight aggregates. Ceram Int. 2018;44(11):12691–12696.
   Web of Science ®Google Scholar
• Moreno-Maroto JM, González-Corrochano B, Alonso-Azcárate J, et al. Manufacturing of lightweight aggregates with carbon fiber and mineral wastes. Cem Concr Compos. 2017;83:335–348.
   Web of Science ®Google Scholar
• Moreno-Maroto JM, Uceda-Rodríguez M, Cobo-Ceacero CJ, et al. Studying the feasibility of a selection of Southern European ceramic clays for the production of lightweight aggregates. Constr Build Mater. 2020;237:117583.
   Web of Science ®Google Scholar
• Cui H, Lo TY, Memon SA, et al. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete. Constr Build Mater. 2012;35:149–158.
   Web of Science ®Google Scholar
• De Gennaro R, Langella A, D’Amore M, et al. Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes. Appl Clay Sci. 2008;41(1–2):61–72.
   Web of Science ®Google Scholar
• Thomas J, Harilal B. Properties of cold bonded quarry dust coarse aggregates and its use in concrete. Cem Concr Compos. 2015;62:67–75.
   Web of Science ®Google Scholar
• Chen H-J, Wang S-Y, Tang C-W. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate. Constr Build Mater. 2010;24(1):46–55.
   Web of Science ®Google Scholar
• Kockal NU, Ozturan T. Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments. Cem Concr Compos. 2011;33(1):61–67.
   Web of Science ®Google Scholar
• Lau P, Teo D, Mannan M. Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash. Constr Build Mater. 2018;176:24–34.
   Web of Science ®Google Scholar
• Shafigh P, Chai LJ, Mahmud HB, et al. A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes. J Build Eng. 2018;15:252–260.
   Web of Science ®Google Scholar
• İpek S, Ayodele OA, Mermerdaş K. Influence of artificial aggregate on mechanical properties, fracture parameters and bond strength of concretes. Constr Build Mater. 2020;238:117756.
   Web of Science ®Google Scholar
• Utreras Estévez IA, Albán Calle JL. Elaboración de una mezcla de hormigón alivianado usando arcilla expandida (Arlita). Caso de aplicación fabricación de paneles prefabricados no estructurales. PUCE-Quito; 2020.
   Google Scholar
• Huang G, Ji Y, Li J, et al. Effect of activated silica on polymerization mechanism and strength development of MSWI bottom ash alkali-activated mortars. Constr Build Mater. 2019;201:90–99.
   Web of Science ®Google Scholar